er3 and beeps Mach 1

[Blue078]

Has anyone had this happen, and how do I cure it> The beeping is driveing me nuts.

After an hour of runing my Prommy starts beeping and flashing er3...temps are still -37 and every thig seems to be OK, I pulled off the cover and pushed "PRG" and it stops beeping for a short period, and then starts back again arggggg!

Manual says condenser over temp?? The condenser is clean, and COOL to the touch, and the fan still works fine.

Think the controller is takeing a dump on me ??

Guys can you lend a hand "PLEASE"

Thanks

[rogue3092]

Sounds like a bad power connection. Check your power cable thats hooked up to the Mach1 and try a different outlet.

[Blue078]

OK it's worth a shot and thanks :) the beeping is driveing me nuts.

[Blue078]

Well it must have something to in this aera. I tried an diff power coard that is rated at 15amp/125 volts, and now as soon as I flip the switch on the PSU thats runing the Prommy beeeeep er3 ???

So I put the OEM power coard back on an and same thing flip the switch and beeeep er3, so I even moved it in to a room on a diff breaker, and nothing is in use on that braker except for the Prommy......still Beeeep er3

I'm at a loss now as what to try next.