Ga-K8NNXP + A64 3000 help

[playmake]

Hi to all!!!!

I'm new in this forum, I write from italy and so, my english needs some improvement ;)

I write to ask you all a bit questions:

1° I've just buy this cpu and MoBo and, obviously i've got some problems :(. I can't go over 230mhz fsb if I don't set ldt at 2.5x, is it normal?

2° i've just changed the original tape between Nb cooler and i've put some conductive paste. i can reach 255 mhz fsb stable but if I set 260 i see data corruption on screen, i can't read nothing and pc freezes. why?

3° i'm not able to change timings of ram from the SPD, if I set 5-3-3-2 (at 200mhz, with abit nf7 i hadn't got any problems at 2.7V) also vith 2.88V the mobo won't boot and reebot with spd settings ---> 8-4-4-3. there is a way to change them?

4° how thees cpu behave with "cold" cooler ---> liquid + 226W peltier) my procio is rock solid whit boxed fan cooler at 2200mhz, is very stable to 2300mhz 1.65Vcore and is only quite stable at 2400 at 1.7 vcore.

5° is it necessary to volt mod my mobo? (i'm using vitesta, not bh-5 based ram) i'll have some improvement or not?

6° changing vqq or ht voltage you've got any improvement or not? i didn't noticed real differences





thanks YOU all

[playmake]

up :(

[Soulburner]

BIOS?

[playmake]

F12


I've GOT a REAL PROBLEM.... my mobo seems not having FIX!!!


oh my God, i've just buy that mobo only for fix and now what i see? when i go up whit fsb pci go up too :(


is there any way to solve this problem (which imho explain because i can't reac more than 255 mhz fsb)

[LikwidKool]

set fsb to 201 in bios then use clockgen to get higher. that way the pci should be locked.

[playmake]

Originally posted by LikwidKool
set fsb to 201 in bios then use clockgen to get higher. that way the pci should be locked.


thank you, it is now ok ;)

[playmake]

now I was able to reach 260mhz sync and over 300mhz async!!!


thanks!!!