Pifast Benchmark [Archive] - Page 7

CCC

10-13-2004, 01:35 PM

Really? Looks like jason's (mickey) typing, he needs to STFU. :stick:

ASUS A8V is THE mobo for 939 IMO. :) (Pairing it with EB would be the best option)

well there is no doubt the a8v is a good mb but not even close to being the best since you cant get over 3.0vdimm... For stock use i would agree its the best.. but until we can all use vdimm above 3.0v its definately not the best board for overclocking.. have to stay with nf3 for high 1:1 ddr speeds...

blinky

10-13-2004, 02:39 PM

well there is no doubt the a8v is a good mb but not even close to being the best since you cant get over 3.0vdimm... For stock use i would agree its the best.. but until we can all use vdimm above 3.0v its definately not the best board for overclocking.. have to stay with nf3 for high 1:1 ddr speeds...
for TCCD 3v is quite enough for DDR600

CCC

10-13-2004, 02:58 PM

for TCCD 3v is quite enough for DDR600

high timings maybe

blinky

10-13-2004, 03:01 PM

I don't have a safe, tested OVP-mod for the A8V. If I had, I had posted in the mod sektion. But some of the resistance is the same on SK8N SK8V and A8V.
The card died the next day, but it was doing 2.112 for 5 hours.
I only needed 35.5 sek!
The mem is easy, mod give you 3.05 volt, then ram-booster op to 3.9-4.0 volt.

I have not tested the max schreenshot. Been bussy doing 3DMark2001 :D
finaly got me a x800xt, its doing 600/620 default volt on air. Now it's voltmodded and mounted on the -112 C cascade. Testbench no oc was 35771 :banana:tom, could u share the mod with us even if its a board killer?

are u saying u have the OVP modded? or did u somehow find bug that lets u past it with the booster?

FDM

10-14-2004, 04:29 AM

too many fast scores so I will even it out by posting my nice and slow one:

http://www.finaldrivemagazine.com/andy/pifast.jpg

SAE

10-14-2004, 04:57 AM

too many fast scores so I will even it out by posting my nice and slow one:

http://www.finaldrivemagazine.com/andy/pifast.jpg

:lol: even it out ;)

You are the man...! :D

Garrett

10-14-2004, 05:46 AM

too many fast scores so I will even it out by posting my nice and slow one:

http://www.finaldrivemagazine.com/andy/pifast.jpg
Getting close to my score, try harder man :thumbsup:
http://home.planet.nl/~dikke332/4947.jpg

ojdr2001

10-14-2004, 02:34 PM

39,81 with 2961 Mhz

yuri

10-14-2004, 06:13 PM

Quick run to test out my new Av8, 300 1:1 3949mhz on my FX53 4.2vdimm

http://24.158.154.102/images/31.97.jpg

eva2000

10-14-2004, 07:10 PM

yuri 4.2v vdimm :eek:

aoc007

10-14-2004, 08:13 PM

Quick run to test out my new Av8, 300 1:1 3949mhz on my FX53 4.2vdimm

http://24.158.154.102/images/31.97.jpg

Whoa dont :banana::banana::banana::banana: with me like that, I think my heart almost stopped, you must mean 2949mhz almost 4ghz on a FX-53 is crazy fast! BTW this is BH-5 2-2-2-5 @ 300mhz? Nice work with the 4.2vdimm :toast:

blinky

10-14-2004, 10:07 PM

Quick run to test out my new Av8, 300 1:1 3949mhz on my FX53 4.2vdimm

http://24.158.154.102/images/31.97.jpgit.. sounds like your joking, but the screenie doesnt look fake

if its real then :slobber:

aoc007

10-14-2004, 11:05 PM

I think a 4ghz FX-53 would be faster than that, but I dont know pifast at all, I think thats due the all the mem bandwidth he has...

blinky

10-14-2004, 11:54 PM

is he joking or what?

CodeRed

10-15-2004, 12:14 AM

Quick run to test out my new Av8, 300 1:1 3949mhz on my FX53 4.2vdimm

<snip pic>

I just soiled myself :slobber:

That is absolutely f*cking insane :toast:

LN2 cooling?

Mem timings must be very loose to hit 300 MHz on a S939

aoc007

10-15-2004, 12:51 AM

Yes but then why would he run 4.2v? Nobody puts that much through any ram except bh-5, please give us more details!

hipro5

10-15-2004, 01:03 AM

CodeRed

10-15-2004, 01:22 AM

Yuri I don't know how you did that , but congrats man......You are one of your kind in Photochop.......or you have manipulate the calculations in Pi-Fast..... :D

You should also "correct" the other times as well so as to be believed.....For example : You should do the 4.17 - 2.52 - 1.70 less than that compared with the others..... ;)

The timings dont quite match up for 13x, unless the ram is running very slack timings, but then again running 300 Mhz would require very loose timings

13x303 with super timings could achieve 30.58 sec, but I must now go and test 3-4-4-8-2T ;)

hipro5

10-15-2004, 01:34 AM

The timings dont quite match up for 13x, unless the ram is running very slack timings, but then again running 300 Mhz would require very loose timings

13x303 with super timings could achieve 30.58 sec, but I must now go and test 3-4-4-8-2T ;)

Even with very loose timings on Ram , it's not possible.....You can't have that score on the first bench and on the other three ones geting those crappy scores.... ;)

CodeRed

10-15-2004, 02:46 AM

Even with very loose timings on Ram , it's not possible.....You can't have that score on the first bench and on the other three ones geting those crappy scores.... ;)

I see now ;)

blinky

10-15-2004, 03:42 AM

its an error: if u compare the score side by side, ull see that his series computing time is FAR below all the others, but his Division time, InvSqrt time, and final huge multiplication time are high than supposedly low clocks, and higher pifast scores. that does not make sense

look Pedro Rocha's:
http://ricky.home.sapo.pt/fx53/pifast3550.JPG

and yuri's
http://24.158.154.102/images/31.97.jpg

so yuri series computing time must have a bug in it, and that affected his scores by making them go waaay down, even with higher calculation and division, and invSqrt times. BUG!!!

Crownie

10-15-2004, 03:50 AM

Nice compare Blinky :) .

Defiantly a bug.

RocKer

10-15-2004, 03:51 AM

New pifast (http://users.pandora.be/RocKer/A64%203200%200426UPMW/Pifast/Pifast-2530mhz.JPG) ,but cpu or mobo is dead now,this was with vdimm at 3.5v.

PMM

10-15-2004, 11:23 AM

Can I ask one thing here and that is feel free to question results but
please do not accuse people of doing the impossible!!!

As someone myself heavy into Voltmods and 1st person to Crack open some specials
to the overclocking community please do not think there are not ways around Over/under Volt & current protection Tom i'm sure like myself will withhold information if it gains him an advantage, i've done it myself and for anyone who has a decent
understanding of electronics they could do away with any on-board Voltage control anyway.

If I think something is a miss i'll either withhold a result pending a request to the user
for additional info, or i'll put up a result if its borderline to my checks in the view that
if I think its duff at a later date it will be removed.

A submitted result for a A64 3800mhz is not going to go up unless proved as its way
beyond the norm and alarm bells ring it's then down to the user to prove it and pass
back information that 100% meets my expectations.

There are alot of people who attempt to slip something in, since its not real time
results its a wasted effort and submitting a time of 1sec ain't ever going to happen
but funny enough there mainly people with Hotmail addies.

There are alot of people here I trust and have proven to me over time a great
honesty for the information they submit, its thanks to these people that I can
weed out the fakes as there result give a trusted trend that can be followed
and compared against.

Its all a bit of fun and more fun when played fare when you know your result
is genuine, I know I have great pride in what I achieve knowing I did it and did
it honestly.

There are some really mad people out there distroying there computers to gain
what many regard impossible, its not impossible its just not having the knowledge
to know how to over come, however there will always be someone who finds out
how.... but also might wan't to keep it to themselves for a bit.

So my moral is ask for evidence but never accuse a liar always trips up and for me
if it happens they have every result submitted stripped and will be named and shamed ;)

SAE

10-15-2004, 04:38 PM

PMM, that's the right way you're going :thumbsup:

I definately know what it takes to decrease the pifast time about 1second!!! It's truely incredible, there's a cpu/cooling/board doing that shown time actually.

He should prove it with a lot more benches... at least superpi should be cake as pifast is way more cpu dependant :D

hipro5

10-15-2004, 05:52 PM

Relax guys........None called anynone a lier........We all "play" in here.......One plays fair.....other not......not a big deal.......Me for example was in the first place of Pi-Fast a couple of moons........Now I'm 15 - 20 - I don't remember....So what?.....Life is going on..... :D

blinky

10-15-2004, 09:49 PM

no one called anyone a liar,

just sayin its so fantastic i want more specs

CodeRed

10-15-2004, 11:12 PM

no one called anyone a liar,

just sayin its so fantastic i want more specs

It might be a good idea for people to post a CPU-Z shot (showing the codes at the bottom left) together with their pifast screenie so that overclocks can be verified ;)

IMO this should be mandatory for all top 20 players.

blinky

10-15-2004, 11:21 PM

It might be a good idea for people to post a CPU-Z shot (showing the codes at the bottom left) together with their pifast screenie so that overclocks can be verified ;)

IMO this should be mandatory for all top 20 players.i concur, and he hasnt posted anything besides that one screenie

SPEAK YURI!

PMM

10-16-2004, 01:59 AM

For info i've not had that result from Yuri Submitted ;)

I Always side on belief that some can be true, I did get caught out once
as I had a result from a German person that I just deleted this was a 3500mhz
speed some 300mhz+ higher than the lads here at the time, I realise now that
the result was genuine but since I deleted it I can't put it up I never contacted
the person because I dis-believed it.

So its is very much down to giving all the proof you can if your up there in the
dizzy heights of the Top20 ;)

SAE

10-16-2004, 10:25 AM

LardArse

10-17-2004, 01:25 AM

Anyone with LGA prescott tried running this program? Its very weird it gives an error before running the program on my 3.6E with Abit AS8.
Edit: It works but it sux on the prescotts :p

hipro5

10-17-2004, 04:15 AM

Anyone with LGA prescott tried running this program? Its very weird it gives an error before running the program on my 3.6E with Abit AS8.
Edit: It works but it sux on the prescotts :p

Yes indeed........S-Sandra Arithmetic and Pi-Fast - any version - sucks as for the Prescott CPU's......There is "something" missing as for these benchies I think...... ;)

LardArse

10-17-2004, 05:27 AM

Hey Hipro whats the missing link?? :D
27s superpi but 41.39s pifast with P4EE
25s superpi but 42s pifast with prescott
:p:

hipro5

10-17-2004, 07:32 AM

Hey Hipro whats the missing link?? :D
27s superpi but 41.39s pifast with P4EE
25s superpi but 42s pifast with prescott
:p:

Yes I've noticed that too.....No go for Pi-Fast as for Prescott CPU's......Pi-Fast maybe an old version BUT newer versions does the same thing.......I think that it must be some new instractions of the Prescott that the Pi-Fast progie isn't capable to "follow".........who knows...... :D

Epsilon

10-17-2004, 04:12 PM

My score:

http://members.home.nl/epsilon/temp/pifast_10x293_3700EB.jpg

Specs:
A64 3400+ Newcastle @ 10x293 (1.845v)
Prom Mach1@ r507
Lanparty NF250 UT
OCZ PC3700EB @ 293mhz 1:1 (3.5v :D )

yuri

10-17-2004, 05:00 PM

Ok i have finally found the max of this board (Asus A8V), here is a 14x303 (FX53@ 4242Mhz) 2/3/2/5/11/16 4.2 vdimm / 2.3vcore

http://24.158.154.102/images/26.84.jpg

cpulloverclock

10-17-2004, 05:08 PM

I dont believe u
sorry...

I think u are using pifast 4.3 :stick:

try superpi 1M please at 4200MHz --> 15-20s

SAE

10-17-2004, 05:34 PM

I dont believe u
sorry...

I think u are using pifast 4.3 :stick:

try superpi 1M please at 4200MHz --> 15-20s
:lol:

Me neither :D

That's too unrealistic... no comments on cooling, no cpuz, no other benches. :(

aoc007

10-17-2004, 05:35 PM

Ok i have finally found the max of this board (Asus A8V), here is a 14x303 (FX53@ 4242Mhz) 2/3/2/5/11/16 4.2 vdimm / 2.3vcore

http://24.158.154.102/images/26.84.jpg

:eek: Whats the cooling? Got a Superpi? Also any pictures of the setup and more evidence, thats way faster than anyone before!

Zeus

10-17-2004, 11:34 PM

Yeah right!
Why do you use a danish version of PiFast to start with?
Are you danish?
2.3Vcore and 4.2Vdimm? uh huh :stick:
Tell us another one...

CodeRed

10-18-2004, 12:29 AM

Ok i have finally found the max of this board (Asus A8V), here is a 14x303 (FX53@ 4242Mhz) 2/3/2/5/11/16 4.2 vdimm / 2.3vcore

Oh come on Yuri, surely you can do better than that ... 5GHz must be easy with photochop :p:

FDM

10-18-2004, 12:40 AM

under 50sec now:
http://www.finaldrivemagazine.com/andy/4944.jpg

SAE

10-18-2004, 01:18 AM

under 50sec now:
http://www.finaldrivemagazine.com/andy/4944.jpg
That's what I call realistic and honest :thumbsup:

:D ;)

FDM

10-18-2004, 01:43 AM

That's what I call realistic and honest :thumbsup:

:D ;)

of course! All my scores are slow enough to be believed even if i was making them up :p:

Garrett

10-18-2004, 04:03 AM

under 50sec now:
http://www.finaldrivemagazine.com/andy/4944.jpg
OMG :eek:
I got 11x256 and 49.47 :confused:
Very nice score FDM :toast: :slobber:

PMM

10-18-2004, 04:59 AM

Yeah right!
Why do you use a danish version of PiFast to start with?
Are you danish?
2.3Vcore and 4.2Vdimm? uh huh :stick:
Tell us another one...

There's no Danish version, only difference is the Kboard lang i.e. the
screen shot just say's in his own native lang. 'Press any key to continue'

Same prog just differenet versions exist more optimized so it more than likely version 4.3 generating that result.

I think if the Windows is fully expanded the text at the top your not seeing will include the version that pifast is ;)

computer_geek

10-18-2004, 10:14 PM

here is mine

eR1k

10-21-2004, 06:41 AM

xp-m 2600+ 3.17ghz 215fsb :stick:

http://homepage.uvt.nl/~s304879/pifast1.jpg

Xassius

10-23-2004, 06:30 AM

http://www.ocprices.com/Xassius/wintecddr2/424pifast.gif

eva2000

10-23-2004, 06:42 AM

http://www.ocprices.com/Xassius/wintecddr2/424pifast.gif you sure you're running hexus pifast and not another version of pifast ?

Xassius

10-23-2004, 06:47 AM

you sure you're running hexus pifast and not another version of pifast ?

whoops...you're right...I remembered..this is 4.3 PiFast and not 4.1 ;)

FDM

10-24-2004, 04:05 AM

new personal best:

http://www.finaldrivemagazine.com/andy/pifast4916.jpg

eva2000

10-25-2004, 09:06 AM

whoops...you're right...I remembered..this is 4.3 PiFast and not 4.1 ;)
LOL..

well new personal best before was 45.20s now my best is = 44.70s

http://www.fileshosts.com/AMD/DFI/6002_650/3700/Kingston/KHX3200K2/2x256/3_4/LDT_AUTO/10x/270-270-2226-1T-1.84-3.58-1.6-1.8_8-12-2212-8x-7x_3120/pifast_44-70.jpg

SAE

10-25-2004, 11:24 AM

LOL..

well new personal best before was 45.20s now my best is = 44.70s

http://www.fileshosts.com/AMD/DFI/6002_650/3700/Kingston/KHX3200K2/2x256/3_4/LDT_AUTO/10x/270-270-2226-1T-1.84-3.58-1.6-1.8_8-12-2212-8x-7x_3120/pifast_44-70.jpg
Hehe... I am faster ;)

The Doctor

10-25-2004, 02:55 PM

3200+
DFI Lanparty UT
Stock Prom M2
Mushkin PC3500

http://home.kabelfoon.nl/~vnrswk/4267.jpg

HaLDoL

10-30-2004, 06:41 AM

WR S754 aircooled

http://kaine.studentenweb.org/270.JPG

44.95 sec
AMD64 3400+ Clawhammer @ 1.55 + 113%
1x256 Mushkin BH5 @ 3.5V 1:1
DFI UT NF3 250GB

So the WR for AXP and A64 S754 on air is mine :)

icesalmon

10-30-2004, 09:09 PM

super pi 1m I get 36

CodeRed

10-31-2004, 01:23 AM

A bit of improvement after switching to the MSI board :D

http://home.exetel.com.au/codered/fx53/pifast37.11.jpg

Jack

10-31-2004, 01:51 AM

Damn Codered! that´s a nice cpu you got there :toast:

did you do any mods to the board?

Gonna get me a Msi too soon :D

CodeRed

10-31-2004, 01:00 AM

Damn Codered! that´s a nice cpu you got there :toast:

did you do any mods to the board?

Gonna get me a Msi too soon :D

Only did the Vdimm/3.3V bypass mod

easiest MHz I ever got :D

Nikita

10-31-2004, 01:42 AM

Only did the Vdimm/3.3V bypass mod

easiest MHz I ever got :D
Looking good mate :toast:

Which MSI board?

CodeRed

10-31-2004, 02:06 AM

Looking good mate :toast:

Which MSI board?

the K8N Neo2

HaLDoL

10-31-2004, 04:31 AM

WR aircooling overall:
43.84 sec
http://kaine.studentenweb.org/275.jpg

Zeus

10-31-2004, 05:41 AM

WR aircooling overall:
43.84 sec
http://kaine.studentenweb.org/275.jpg

Trc @7 and Tras @2??
You changed settings after you did the run to confuse us all didn't ya?

macci

10-31-2004, 06:20 AM

I get 44.23 sec (http://www.akiba-pc.com/939/hexpi_2674_44_23.gif) aircooled at 243x11 1:1 w/ 3500 0.09u.

HaLDoL

10-31-2004, 07:25 AM

Trc @7 and Tras @2??
You changed settings after you did the run to confuse us all didn't ya?
No I didn't. Why would I wanna do that?

CodeRed

10-31-2004, 01:02 PM

WR aircooling overall:
43.84 sec
http://kaine.studentenweb.org/275.jpg

Not quite a WR, but a damn find job none the less

this is my FX53 on air (stock HSF too):
http://home.exetel.com.au/codered/fx53/pifast2695.jpg

Zeus

10-31-2004, 01:14 PM

Just when you think you got it really going, there's CodeRed... :D
Good job to the both of you, i'm sure HalDoL got something left.

CodeRed

10-31-2004, 01:20 PM

Just when you think you got it really going, there's CodeRed... :D
Good job to the both of you, i'm sure HalDoL got something left.

hehehehe

I am sure someone with a FX55 could blow that score out of the water anyway. Quite a few FX55's are doing > 2.9 on air, anything like 11x265 would be sub 41 sec.

HaLDoL

11-01-2004, 06:13 AM

OK no WR overall then :D
Still a S754 record :)

RocKer

11-01-2004, 06:46 AM

Trc @7 and Tras @2??
You changed settings after you did the run to confuse us all didn't ya?
:lol: :lol: :up: .

CodeRed

11-01-2004, 01:41 PM

a few more MHz :)

http://home.exetel.com.au/codered/fx53/pifast36.92.jpg

Dragonmike

11-02-2004, 02:39 AM

Not quite a WR, but a damn find job none the less

this is my FX53 on air (stock HSF too):
http://home.exetel.com.au/codered/fx53/pifast2695.jpg

Damn, how come you can hit 2700 on air with the stock HSF?! :slobber: I mean, this is nuts, that's what I reach with my TDX and 30°C :mad:

On air, I managed ~2550 MHz on my FX-53. Anything above that would be unstable. 2600 would crash...

YoupY

11-06-2004, 07:09 AM

System upgrade == score update :D

40.80s atm

http://members.home.nl/youpy/s939prom1_small.jpg (http://members.home.nl/youpy/s939prom1.jpg)

And there is more to come :D I only need to put the Vcore mod on and I seriously need some better mem. It's only running @ DDR500. I need like 2 x 256 instead of 2 x 512 to get DDR 300 at 1T

CodeRed

11-06-2004, 01:20 PM

Damn, how come you can hit 2700 on air with the stock HSF?! :slobber: I mean, this is nuts, that's what I reach with my TDX and 30°C :mad:

On air, I managed ~2550 MHz on my FX-53. Anything above that would be unstable. 2600 would crash...

Its one of the newer FX53, week 33. They seem to be 100 MHz faster than the older ones. But then again the FX55's are 200 MHz faster again.

Tom Holck

11-06-2004, 02:45 PM

FX55@3724 MSI-939 at 2.032 volt

The cascade going -125 C

CodeRed

11-06-2004, 04:39 PM

Man thats tryuly amazing Tom :toast:

You have the pifast record back, now go for 22sec SuperPi 1M

Tom Holck

11-06-2004, 04:43 PM

Man thats tryuly amazing Tom :toast:

You have the pifast record back, now go for 22sec SuperPi 1M

Done M8!
http://www16.big.or.jp/~bunnywk/cgi-bin/superpi.cgi

cpulloverclock

11-06-2004, 04:45 PM

Done M8!
http://www16.big.or.jp/~bunnywk/cgi-bin/superpi.cgi
:) :toast:

you are insane

and what does it give in screenshot? 3.9-3.95GHz?
I cant wait :banana:

Tom Holck

11-06-2004, 04:57 PM

:) :toast:

you are insane

and what does it give in screenshot? 3.9-3.95GHz?
I cant wait :banana:

Thats funny, tried some schreenie at 38xx, but it stops.
I think in a few dayes, when the termal-greas stabilized.
Or the FX55 is like that.. :rolleyes:

cpulloverclock

11-06-2004, 05:01 PM

Thats funny, tried some schreenie at 38xx, but it stops.
I think in a few dayes, when the termal-greas stabilized.
Or the FX55 is like that.. :rolleyes:
Yippie Kie Yay

U think that you can do a 8 and 32M?

YoupY

11-06-2004, 07:32 PM

OMG Tom, completely insane. I hope you can do ~4 Ghz stable enouhg for PiFast ie superpi or anything you can get screenie stable

hipro5

11-07-2004, 04:04 AM

FX55@3724 MSI-939 at 2.032 volt

The cascade going -125 C

He,he,he..........That's INSANE my friend......... :D :toast:

NICE Super-Pi TOO....... ;) :toast:

erik9287nl

11-07-2004, 06:19 AM

Wow, insane score Tom :slobber:

Hope you can squeeze some more mhz from the cpu :p:

Tom Holck

11-07-2004, 09:48 AM

Wow, insane score Tom :slobber:

Hope you can squeeze some more mhz from the cpu :p:

might try some higher FSB/RAm with a little relaxed timings :rolleyes:

12 x 310 might be OK

GomerPyle

11-07-2004, 09:55 AM

Extreme there Tom :slobber:

Will be difficult to beat right now hehe :)

Garrett

11-08-2004, 02:42 AM

:worship: Tom :worship:

Chriviper

11-08-2004, 12:21 PM

Tom, you are an animal man!!!!! Though scores are truely amazing :banana4:

aoc007

11-08-2004, 01:18 PM

So where did you get this cascade? :D Nice work :toast:

Tom Holck

11-08-2004, 01:27 PM

So where did you get this cascade? :D Nice work :toast:

I had some of the worlds best Cascade-engineers to help me. I made the specifikation, test and design. It's tested and ready for sale ;)

Btw: It can take your P4@3.2 to 48xx mhz :banana:

cpulloverclock

11-08-2004, 02:09 PM

I had some of the worlds best Cascade-engineers to help me. I made the specifikation, test and design. It's tested and ready for sale ;)

Btw: It can take your P4@3.2 to 48xx mhz :banana:313*12 = 33"**?

Tom Holck

11-08-2004, 03:09 PM

313*12 = 33"**?

Not faster, bad ramtimings have to work at it. Cascade rest, next projeckt work at my new x800xt on the other cascade. But no time next weekend :(

aoc007

11-08-2004, 03:15 PM

Now THATS some insulation :eek: 48xxMhz would be 24/7?

BTW ever tried a Winchester? It doesnt have the cache or unlocked multi of the FX but AMD 90nm seems to clock nicely.

SAE

11-08-2004, 04:39 PM

It's tested and ready for sale ;)

Hmm. Ready for sale??? :D

What would it cost like?? ;)

cpulloverclock

11-09-2004, 06:42 AM

Hmm. Ready for sale??? :D

What would it cost like?? ;)
0.1$

cpulloverclock

11-09-2004, 06:44 AM

too expensive
0.01$

quintus

11-09-2004, 06:48 AM

That looks assome Tom but isnt there too much insulation??? looks like 20cm in diameter!!! nice fiting work so the cascade is in the white box wow nice!!!

Tom Holck

11-09-2004, 07:58 AM

That looks assome Tom but isnt there too much insulation??? looks like 20cm in diameter!!! nice fiting work so the cascade is in the white box wow nice!!!

Only about 1.5 cm insulation. :slobber:

quintus

11-09-2004, 08:06 AM

omg!!!
is that polyurethaan outside of evap and in that casing? and what is that on the botom of tha evap some protection or something speciale like diamonds :rolleyes: for beter heat transfer if its secret dan i will not ask anymore! so this is 2 compressors cascades wonder how much insulation u will use on 3 or 4 stage cascade! :confused: all mobo under izolation??? :slobber:
are not some of the components that are under that insulation melting of heat?

super good job i like the fact that is all in a box bot all around that shows experience
take in tha most friendly way as posible pls!!! thx

ps may we know yours evap design???

HaLDoL

11-09-2004, 04:04 PM

Not quite a WR, but a damn find job none the less

this is my FX53 on air (stock HSF too):
http://home.exetel.com.au/codered/fx53/pifast2695.jpg

Got you now :)

http://kaine.studentenweb.org/pifast43.34.jpg

CCC

11-09-2004, 04:23 PM

here is an aircooled fx55

http://jason57.iwarp.com/stuff101/case/sk8v/dryicesetup/airtesting939/fx55/full2937air.JPG

CodeRed

11-09-2004, 10:36 PM

Got you now :)

So you have :D

Good job :toast:

@CCC, nice for air, is that Jason's old FX55?

HaLDoL

11-10-2004, 12:14 AM

here is an aircooled fx55
<img>

Damn those FX55's :D
That score is out of reach ... for now :)

Ferry82

11-10-2004, 11:32 AM

Ok its not a AMD but still nice for a Intel on water i think? :)
I hit that stuppid wall @ 260 :(

http://bas.scooterforum.net/flarco/pifast_50.00.png

zyx

11-10-2004, 11:57 AM

41.34 dfi 754 nf3. 3400+ clawhamer bh5 2-2-2 with 3.6vdimm

mike.elmes

11-12-2004, 08:17 PM

:D Here's my latest greatest.....
but with a couple new sticks of ram I bested the 39.36 by 2 seconds
my newest is 37.45 :banana:

L@TrO

11-14-2004, 09:36 AM

http://users.skynet.be/bk265593/pifast2.JPG

WR , boxed koeler with 3200+ :D

HaLDoL

11-14-2004, 10:46 AM

41.34 dfi 754 nf3. 3400+ clawhamer bh5 2-2-2 with 3.6vdimm
Nice, what cooling?

kyosen

11-15-2004, 07:57 AM

Hi, my friend CAL930's latest and fastest result "33.83s" is here:D
http://cal930.sakura.ne.jp/cgi-bin/c-board/c-board.cgi?cmd=one;no=1022;id=
He usually registered his score to Ministry(http://contests.mofoc.net/index.php),
but he says that he was rejected this time...
Anyway, nice record, CAL930! :toast:

Learn

11-15-2004, 08:58 AM

cpulloverclock

11-15-2004, 09:53 AM

Insane time at 3636 :p: :toast:

LarsK

11-15-2004, 11:09 AM

Those AMD FX-55 chips are looking very tempting. After killing (well at least teporarily disabling) my IC7 Max 3 (fully modded), I was just testing my new completely stock IC7-G board today. Way behind the cascade/AMD setups I know, but pretty good for an Intel setup, especially one that's completely unmodded and "only" Mach II GT cooled... :p:

Fewture

11-15-2004, 12:22 PM

zyx

11-15-2004, 11:07 PM

Nice, what cooling?

with 2 stage phase change look this but the text is in greek http://www.thelab.gr/showthread.php?s=&threadid=5695

Fewture

11-15-2004, 11:59 PM

YoupY

11-19-2004, 09:20 AM

LOL fastest Non-FX proc :D

Mobo : MSI K8n Neo2
Cpu : 3500+ NC v0.6
Mem : GSkill TCCD PC4400

http://members.home.nl/youpy/s939prom3_small.jpg (http://members.home.nl/youpy/s939prom3.jpg)

Let's see some winnie power now, this should be easy to beat :D

Zeus

11-19-2004, 03:41 PM

Got myself a new CPU. :D
NewCastle 3400+ 0434MPMW
I have to say i already like it a lot! :)

http://www.xtremesystems.org/forums/attachment.php?attachmentid=19666&stc=1

This is just watercooled with plain water.
44.17sec
Might improve on that score, only got it tonite! ;)

Epsilon

11-19-2004, 03:58 PM

Nice score YoupY ;)

Thats a very nice cpu :). :toast:

petervandamned

11-22-2004, 12:23 AM

Dutchies are going strong :)

http://www.tweakers.net/ext/f/45570/full.jpg

Jack

11-22-2004, 01:24 AM

Peter i think you can tweak your machine a bit more :D
take a look at CodeRed's incredible result:
http://home.exetel.com.au/codered/fx53/pifast3183.jpg

petervandamned

11-22-2004, 02:16 AM

jack

the mem is on 166 unfortunaly :(
seems the chip-set is to old on the motherboard ??
wil try to get my hands on some tccd's

the mem is corsair 3500 2 times 256
i have also tried corsair 3200 LL rev 1.1
geil 4200
ocz 3700
but on every set-up i get errors above 225 on the mem :(

B@W will send me today a one gig OCZ 3200 rev2
together with the booster and the powerstream 520 and the OCZ titan 3 is this a complete OCZ bench rig

BIGTOE if i make pics , will OCZ send me some DDR2 ;) :toast: ???????

Jack

11-22-2004, 05:03 AM

jack
the mem is corsair 3500 2 times 256
i have also tried corsair 3200 LL rev 1.1
geil 4200
ocz 3700
but on every set-up i get errors above 225 on the mem :(

looks like a motherboard issue, dont you think?
cause the mem youve tried all have different chips on them

did you dissable aggressive timings in bios?

Garrett

11-22-2004, 01:59 PM

I get PiFast errors too @ 225 mem, but ONLY if I use the divider, I can run 250 24/7 without any problems or errors, and that's without the divider, strange thing here...

Maybe a BIOS update will solve this, I'll have to wait and see ;)
(MSI K8N Neo2)

ojdr2001

11-23-2004, 03:43 PM

FX55@3.340 cooled by r404a mach1
MSI K8N Neo2 Plt
2x256 BH5 @ 1,5-2-2-5

http://www.ojdr2001.com/pf36,13.jpg

Zeus

11-24-2004, 08:08 AM

Been pushing it some more today and got under 43 seconds. :D

http://www.xtremesystems.org/forums/attachment.php?attachmentid=19840&stc=1

That has got to be one of the best watercooled S754?

ojdr2001

11-25-2004, 11:47 AM

The only single phase system in the restrict club of "under 36"? :)

http://www.ojdr2001.com/pifast35,80.jpg

Learn

11-26-2004, 05:27 PM

47.88s, Mobile 2500+, liquid 12.5°c

PMM

12-01-2004, 01:57 PM

All submissions are on hold until i hear info off Kunaak ref this so called possable
way to cheat the Pifast Challenge.

It may effect the way I validate submissions in the future.

Regards
PMM

Kunaak

12-01-2004, 02:19 PM

I have replied and given you all information I have.
as well as my ideas on how to improve or change the benchmark, if possible.

PMM

12-01-2004, 03:29 PM

Thanks Kunakk :) For all interested I have Emailed author of the prog in regards to the vunerability with the hope of having it plugged.

There is something that could still give it away that a user is cheating which i'll continue to investigate to improve the authorising process.

SAE

12-02-2004, 01:06 AM

Yeah, some seem to fake results ;) :D

No, I think it's great there are peeps taking care of cheaters and improving our bench apps :thumbsup:

PMM

12-02-2004, 05:14 AM

I come from a distributed computing team that has had a stong desire
where possible for weeding out cheats from our Seti incounters and picking
out results that are dud due to overclocking to far or machine issues.

And I myself feel that people who feel the need to cheat are in essance only cheating themselves, I've said it before here its far more satisfying knowing you've done it legit and it your own skill that has been put to use to gain the score.

Mauri Antero

12-02-2004, 11:04 PM

P4 560 :D
Doesn't convince me in Pifast, with my FX-53 much better time. :D

kakaroto

12-03-2004, 02:09 AM

cpulloverclock

12-05-2004, 05:46 AM

Dutchies are going strong indeed peet :)

Here one shot of my Power Newcastle S754 :D
Prom 507 cooled - no volt mods!!

http://www.xs4all.nl/~famchow/A64_3400/3400+%200.6/Pifast_3.1GHz_11.JPG

http://www.xs4all.nl/~famchow/A64_3400/3400+%200.6/screen_3.2GHz.JPG
WR by MEMESAMA

world record memesama

M/B：MSI K8N Ne02 Platinum
CPU： ADAFX55 0438TPMW
CPU Cooling：クリPro3 LN2
Chipset Cooling：ノーマル
Memory：PC3200 CL2.5 256MB×2 BH-5 0311
VGA：Canopus PWR128P(PCI)
HDD：IBM DTLA 15G
Power suplｌｙ：ZippyHP2-6460P
OS：Windows Server 2003
Vddr:3.60＝Vio3.60V
Vcore:1.1.86V(CPUZ読み)
HT:×1
http://blue.ap.teacup.com/memesama3939/img/1102202236.jpg

kakaroto

12-05-2004, 05:57 AM

woow, nice :D 33sec :slobber:

btw why is CrystalCPUID showing 2.6GHz??

JacobHansen

12-05-2004, 06:39 AM

Hm.. Very odd. Does the Crystal CPUID not define the current CPU speed, or just the standard speed?

kakaroto

12-05-2004, 06:42 AM

Hm.. Very odd. Does the Crystal CPUID not define the current CPU speed, or just the standard speed?

Crystal CPUID always shows the current CPU speed, might he used Clockgen...

hmm, one shows MP13 and other 13.5 :S

JacobHansen

12-05-2004, 06:45 AM

Funny, that there is a 1.000 Mhz diffrenze in the pics..

NiCKE^

12-05-2004, 06:55 AM

Cheating or just a bug?

qk4722

12-05-2004, 07:08 AM

I test pifast4.3 & 4.1 different :shrug:

JacobHansen

12-05-2004, 07:50 AM

Well MEMESAMA has always been around at the Top of Overclocking. I doubt he is Cheating.. But, one should never say never..

k|ngp|n

12-05-2004, 10:24 AM

Played around with some pi fast today....pretty cool bench. YOu can go a little farther with cpu than on super pi.
I'm coming for you Tom Holck ;):
DI cooling -69c load temps
http://pic8.picturetrail.com/VOL256/1324330/2517856/75651722.jpg

zyx

12-07-2004, 09:57 AM

39.73 with 3400+ newcastle 1.84v core 1x256 bh-5 3.6volt dfi nf3 cooling 2 stage phase change by "ice" of greece **thelab.gr**

kakaroto

12-07-2004, 10:56 AM

39.73 with 3400+ newcastle 1.84v core 1x256 bh-5 3.6volt dfi nf3 cooling 2 stage phase change by "ice" of greece **thelab.gr**

woow, finally a Newcastle S754 under 40 :toast:

Mine 3400+ NC is maxed at 3108MHz (310x10) 1:1 , which result lowest time 40.25

enduracell

12-07-2004, 12:22 PM

Congratulations zyx outstanding score, fighting w/ an 754 is not an easy task http://www.xtremesystems.org/forums/images/smilies/toast.gif

jikdoc

12-07-2004, 06:49 PM

on an fx55 vapoLS ocz4200EL at 11x284 2.5-3-3-10.

zyx

12-07-2004, 11:32 PM

Congratulations zyx outstanding score, fighting w/ an 754 is not an easy task http://www.xtremesystems.org/forums/images/smilies/toast.gif

thanks my friend
:toast: :toast:

petervandamned

12-08-2004, 11:23 PM

With my new MSI k8n 0411 i can finaly do 1:1 :)
under the 38 sec :toast:

http://www.tweakers.net/ext/f/46825/full.jpg

this is with old corsair 3500 2-2-2-5

fot the specs :

oc-rig (http://www.pvdch.cistron.nl/got/got.htm)

PMM

12-09-2004, 08:24 AM

zYx.... You can stop submitting your score i received it the 1st time
have all 7 ;)

Honestly you only need to send it once ;) it will go in when I get around to updating
it, system does not work in real time.

Won't be for a few days yet.. but it will.

Riverna

12-09-2004, 08:52 AM

My Score 45.35 Sec :(

Garrett

12-09-2004, 11:52 AM

My score 44.69
I'm happier with the bandwidth though ;)
http://home.planet.nl/~dikke332/4469.png

zyx

12-09-2004, 12:03 PM

PMM

12-09-2004, 12:24 PM

ok sory. :( my mistake, I thought the submission form was broken :( ;) :D

Sorry m8y your right just seen your post over at Hexus so went to try
and submit a score to the database and got same error :(

That's why the multiple entries I had from you were showing.

the form submits in 2 different way's as a safeguard so I always get the results incase Hexus goes down I can still have the results to hand.

I don't really have the time to look at it at the mo :( bad time of the year

I'll try and sort as soon as :(

Sorry again having a moan without valid cause :(

PMM

12-09-2004, 12:38 PM

Well cannot ftp in either so I presume some server tinkering has taken place at Hexus
sent David a PM just a matter of waiting see what occurs.

Results stopped entering the database on the 17th Nov so I have alot of back tracking to do through :(

Rest assured I do have everyones results even though they have not entered the database.

Jaan

12-13-2004, 12:23 AM

40,44sec - AIRCOOLED! (http://www.hot.ee/winchester/40.44-2925MHz.PNG) winchester 3200+

Winchester 3200+/1,8V (IHS removed) @2925Mhz 325x9 CPU, 265MHz memory (166 in bios)
Coolermaster Hyper6
MSI Neo2 Platinum, Vdimm, vcore modded
2x256MB BH5 (Corsair) CL1,5-2-2-4/3,8V
ambient temp- 0*C- open window mod :D

Garrett

12-13-2004, 12:31 AM

plz register here too: http://www.ministry-oc.net/contests/viewcontest.php?c=1&start=0
You beat the previous air champ, HaLDoL, by almost 3 seconds :slobber:

funkflix

12-13-2004, 10:36 AM

40.52

http://people.freenet.de/funkflix/pifast40.jpg

Watercooled! :)

@Jaan

Great result! Damn, i benshed with my old Win2k ... And the Tras :4 + CL 1.5
would gives u a nice boost! I should give it a try! :)

Garrett

12-13-2004, 11:00 AM

omg... impressive!!! :toast:

funkflix

12-13-2004, 12:12 PM

omg... impressive!!! :toast:

Hmm, i can't publish any scores on the website u posted! Why?

http://people.freenet.de/funkflix/mini.jpg

NoStra

12-14-2004, 01:53 PM

have you registered on the site?

funkflix

12-14-2004, 02:04 PM

Sure! U can't connect to the resultpages without it! Strange!

Riverna

12-14-2004, 02:46 PM

http://www.forumdeluxx.de/gallery/data/500/8886pifast.JPG

SynGroW

12-14-2004, 10:43 PM

Hmm, i can't publish any scores on the website u posted! Why?

http://people.freenet.de/funkflix/mini.jpg

Use IE instead of Mozilla (firefox) ;)

My latest score:

http://www.hardwaredome.nl/images/syngrow/pifast/4045.JPG
40.45s

Specs:

A64 3500+ NC @ 3003MHz
MSI K8N Neo2 (vcore modded)
Corsair TWINX512-3200LLPT v1.1 (BH-5) @ DDR546 ~3,7v CL1,5-2-2-5
Prometeia Mach II r507
OCZ DDR-Booster

xs64

12-15-2004, 03:12 AM

My suck NC can't run over 2.7g :(
And i'm using Zalman Cu7000

http://img.photobucket.com/albums/v139/amdson/SNAG-0003.jpg

xs64

12-15-2004, 03:19 AM

I have a question , when it shows : Error in comptutation .... what it means ?

Thx in advance

Thorry

12-15-2004, 05:16 AM

I have a question , when it shows : Error in comptutation .... what it means ?

Thx in advance

It means your CPU is unstable and wasn't able to complete the calculation without errors. Your score thus is invalid (when Error in computation is showing).

I've got the problem that there is no speed increase (more often a decrease) when going beyond 334 and I always get an error in computation beyond 336 (no matter what mem dividers, chipset voltages or cpu multiplier)

My score:
40.61

http://www.thorry.net/pifast-4061.JPG

Winchester 3000+ @ 3 ghz
Mem won't get up to the high speeds, maybe my BH-5 needs replacing :(

Garrett

12-15-2004, 06:43 AM

It means your CPU is unstable and wasn't able to complete the calculation without errors. Your score thus is invalid (when Error in computation is showing).

I've got the problem that there is no speed increase (more often a decrease) when going beyond 334 and I always get an error in computation beyond 336 (no matter what mem dividers, chipset voltages or cpu multiplier)

My score:
40.61

http://www.thorry.net/pifast-4061.JPG

Winchester 3000+ @ 3 ghz
Mem won't get up to the high speeds, maybe my BH-5 needs replacing :(So the 9x multiplier is holding you back now, right?

Thorry

12-15-2004, 08:02 AM

Right MP 9x sucks.

I'm tweakin at the moment, memtest86 now 5th run on test #5.

260x9 1:1 CL2 1T 2-2-2-5

Had to low LDT to 3x to get it up to 260.

265 gives errors at run #2

Jack

12-15-2004, 10:45 AM

MSI K8N NEO2 unmodded
FX-55
Kingston PC3200 @ 262MHz

http://home.student.utwente.nl/r.makkink/41.16.JPG

fastest pifast on air in NL :D

Thorry

12-15-2004, 03:32 PM

MSI K8N NEO2 unmodded
FX-55
Kingston PC3200 @ 262MHz

http://home.student.utwente.nl/r.makkink/41.16.JPG

fastest pifast on air in NL :D

Very very nice :toast:

Now go and put on some phase change :p:

Gamer

12-17-2004, 12:19 PM

[/url]

fastest pifast on air in NL :D

hehehe, Belgium beats the Netherlands :)

http://users.pandora.be/gamer/FX-55/40.88.JPG

aircooled with XP-120.

Garrett

12-17-2004, 12:32 PM

I miss 2 things!!

1.The numbers at the bottom of the CPU-Z screen.
2.The Computation seems ok... where is that??

Gamer

12-17-2004, 12:38 PM

ehm, hidden ? :)

sorry, but don't think you need it to see this is legit.
didn't thought about it when I was trying to get the pic as small as possible.

I had an error in a previous computation at same speeds, but the score was higher then this.
I think someone can verify this result with his own result.

ok, I compared it with the other score (41.16) and you can see that my score is in all tests a bit faster, this is the proof ?

I'll try to remember next time ok ?

Jack

12-17-2004, 12:45 PM

hehehe, Belgium beats the Netherlands :)

http://users.pandora.be/gamer/FX-55/40.88.JPG

aircooled with XP-120.

goddamn :D
nice work :toast:

i did my run with boxed cooler ;) havent got anything better

will try to beat you next week, but my mem is pretty much maxed out.
Will see what i can do :)

Gamer

12-17-2004, 12:47 PM

thx, and sorry about that :D

my ram isn't :

http://users.pandora.be/gamer/BH-5/280.JPG

:D

Jack

12-17-2004, 01:06 PM

pffff :D

insane mem clocks :toast:

im gonna try win2k3 with some tweaks next week,
hope to cut off a couple of hunderdth of sec.
and play with my mem some more, 4.0V or so ;)

CodeRed

12-17-2004, 01:19 PM

ehm, hidden ? :)
.....
I think someone can verify this result with his own result.

My calcs give 40.76 sec @ this speed. Close enough :)
Try setting the refresh rate to 200 @ 15.6usec for a small boost.

Damn nice for air cooled :toast:

Gamer

12-17-2004, 01:26 PM

ok, thx for the tip and the verification.
although I too have a calculator in windows ;)

it's been a while since I used an AMD machine, but I'm starting to like it :)

Jack

12-17-2004, 01:38 PM

codered could i have that prog of yours that improve my pifast with ~0,04s?
i thought you mentioned it somewhere :)

need it to beat Gamer :D

Gamer

12-17-2004, 01:43 PM

please share the knowledge :)

CodeRed

12-17-2004, 02:54 PM

codered could i have that prog of yours that improve my pifast with ~0,04s?
i thought you mentioned it somewhere :)

need it to beat Gamer :D

which prog?

I only use a real-time launcher for pifast and A64 Tweaker

links for both:

launcher.exe (http://home.exetel.com.au/codered/launcher.exe)
A64 Tweaker (http://home.exetel.com.au/codered/A64Tweaker/a64tweaker_V031.zip)

To run the launcher simply create a BAT file in the pifast directory with the following in it:

@echo off
launcher pifast41.exe hexus.txt

enduracell

12-17-2004, 03:50 PM

The link for launcher.exe doesn't work. I need this util too it will help me beat a friend (his is 0.03 below me)
Thanks. :toast:

CodeRed

12-17-2004, 03:59 PM

The link for launcher.exe doesn't work. I need this util too it will help me beat a friend (his is 0.03 below me)
Thanks. :toast:

try again, forgot to set the permissions :(

enduracell

12-17-2004, 04:06 PM

Thank you :toast: and thanks for all other tools u have offered me :)

Jack

12-18-2004, 09:59 AM

which prog?

http://www.xtremesystems.org/forums/showthread.php?p=573702#post573702

that is what i meant :)

that launcher.exe prog is very nice btw :D

Gamer

12-19-2004, 04:07 AM

http://users.pandora.be/gamer/FX-55/37.JPG

FX-55 @ 3150 (max) :(

Jack

12-19-2004, 04:16 AM

FX-55 @ 3150 (max) :(

looking at your pifast clocks on air, i'd expect the cpu to go higher than that :stick:

and what i was wondering, what bios are you running and which driver do you have installed?

edit:
Tras at 4 might improve you score a bit more :)

YoupY

12-19-2004, 10:14 AM

http://www.xtremesystems.org/forums/showthread.php?p=573702#post573702

that is what i meant :)

that launcher.exe prog is very nice btw :D

We didn't use the launcher prog in the benchmarks shown there. All it does is running PiFast at realtime priority.

Did some testing with it using the launcher and the dosbox at realtime but that was both giving the same scores.

zyx

12-20-2004, 11:24 AM

39.38 with 3400+ newcastle 754 on dfi nf3 with 1.84 vcore 1x256 bh5 with 3.6 vdimm 2 stage phase change by "ice" of greece ***thelab.gr*** :toast:

bias_hjorth

12-20-2004, 11:56 AM

damn skippy insane! Awesome job - Hellas rocks :hehe: :D

zyx

12-20-2004, 12:58 PM

damn skippy insane! Awesome job - Hellas rocks :hehe: :D

:D hellas :D :toast:

enduracell

12-20-2004, 03:37 PM

Awesome job indeed, it's getting better and better, keep benching and tweaking :toast:

zakelwe

12-26-2004, 11:29 AM

Sub 40 second air cooled Fx-55

http://www.aocb77.dsl.pipex.com/air3993pi.jpg

Ambient was -1.5C.

Also runs 3dmark at close to these speeds

http://service.futuremark.com/compare?2k1=8325950

Regards

Andy

Jack

12-26-2004, 11:39 AM

damn zakelwe, really nice score :toast:

what is the max clocks your mem can do?
and which heatsink are you using on the cpu?

zakelwe

12-27-2004, 02:35 AM

damn zakelwe, really nice score :toast:

what is the max clocks your mem can do?
and which heatsink are you using on the cpu?

Thanks Jack, appreciated.

Ram can do between 255 and 260 at 2-5-2-2 but that is not enough to go to a 11 multiplier sadly.

Here is the rig I just took a picture

http://www.aocb77.dsl.pipex.com/5800rig.jpg

The cpu heatsink is a Zalman 7000 with the original fan ripped out and a delta 80mm stuck on top. The whole board is also cooled bvy a Papst 6212nm 170mm fan which is the best fan I have ever used. It is so good I do not need a fan on the 5800 video card and that runs at 530/1180 in that state .. not bad for a " hot " chip.

I have the board placed on two 1cm thick neorprene mats, but there is a channel where the cpu is so that cold air from the Papst can go in through the IDE socket side of the motherboard, rush past the cpu bottom and then out by the USB ports, so the bottom of the cpu is cooled as well.

Then it's just waiting for cold air to arrive in the UK :) I did manage a 3Ghz pifast but that was when I was tunning in and only was using the 13 multiplier. http://www.aocb77.dsl.pipex.com/air3003pi1.jpg

Regards

Andy

Jack

12-27-2004, 08:17 AM

3GHz is nice :D

got the same problem as you, mem wont go higher.
so im stuck at 2887mhz with mem at 262,5mhz
and going to multiplier 12x totally :banana::banana::banana::banana:s up the mem bandwidth :(

ziberia

12-27-2004, 12:57 PM

Here's late Xmas Greetings from ziberia...

36.08

FX-55 @3353MHz, MSI Neo2 Plat, Mushkin Level one 3500, Vapochill LS & A64 Tweaker from CodeRed.

SuperPi 1M 25sec, SuperPi 8M 4:44

EDIT: Almost attached wrong pic ;)

gocchin

12-27-2004, 09:49 PM

http://www.jpop.com/pifast.jpg

Cyrus The Virus

01-01-2005, 02:27 PM

http://users.pandora.be/CyrusTheVirus/PiFast%2043.31%20@2800%20Mem@233.JPG

PiFast: 43.31 seconde fastest 3200+ on AIR in PiFast :D. I will soon buy some G.SKill PC4800 2x512MB and Unleash the AMD 64 Power :p: :banana:

Epsilon

01-19-2005, 10:11 AM

Jack

01-21-2005, 12:49 PM

Hey maybe you guys can help me out...
i was wondering how many mhz i would need for a sub 40s pifast score?
Check my pifast screenie in my sig

thanks :)

SAE

01-21-2005, 01:01 PM

Hey maybe you guys can help me out...
i was wondering how many mhz i would need for a sub 40s pifast score?
Check my pifast screenie in my sig

thanks :)
IMHO you'd need 3GHz, sure. Maybe 3.05GHz for pretty sub-40 scoring ;)

Tom Holck

01-21-2005, 02:39 PM

Hey maybe you guys can help me out...
i was wondering how many mhz i would need for a sub 40s pifast score?
Check my pifast screenie in my sig

thanks :)

3120 Mhz goes sub 40... ;)

at extreme FSB and tweak etc 3Ghz+ needed

bias_hjorth

01-21-2005, 02:45 PM

Gocchin has pretty much answered that question. xtremefsb / htt = no
http://www.jpop.com/pifast.jpg
Pretty close to 3ghz too

SAE

01-21-2005, 04:21 PM

Nice, we are quite close together with our estimating ;)

zakelwe

01-22-2005, 05:08 AM

I managed sub 40 with just under 3Ghz

http://www.aocb77.dsl.pipex.com/air3993pi.jpg

Regards

Andy

Jaan

01-22-2005, 06:08 AM

Hey maybe you guys can help me out...
i was wondering how many mhz i would need for a sub 40s pifast score?

2950Mhz is adequate for winchester+BH5/well tuned system. :)
For you FX55 even little-bit less, I think.
My result was 40.44sec@2925Mhz aircooled winchester :p:
screen (http://www.hot.ee/winchester/40.44-2925MHz.PNG)

Msi K8N Neo2 Vmem/Vcore modded
2x256MB BH5@3,8V
a64 3200+@1,8V IHS removed
CoolerMaster Hyper6@ 0-5°C ambient :D

Jack

01-22-2005, 12:29 PM

Jaan, I saw youre score on Ministry of OC.
very impressive :toast:

youre the only guy on air above my in the list.
But ill get you ;)
Just need some cold weather here...

zakelwe

01-23-2005, 02:39 AM

Jaan, I saw youre score on Ministry of OC.
very impressive :toast:

youre the only guy on air above my in the list.
But ill get you ;)
Just need some cold weather here...

There's a high moving in from Greenland, though temps will be 0 to -1C in UK, might get to Holland ?

http://www.metoffice.gov.uk/weather/charts/index.html

Regards

Andy

NoStra

01-23-2005, 03:45 AM

That would be nice :) I can bench here with water of 10 degrees @ 2880mhz with a newcastle.... I hope it will freeze 4 or 5 degrees....then a will have a watertemp of 0 degrees! maybe 2930 ~2950 will be possible...

Jack

01-24-2005, 05:10 AM

There's a high moving in from Greenland, though temps will be 0 to -1C in UK, might get to Holland ?

http://www.metoffice.gov.uk/weather/charts/index.html

Regards

Andy
cool :D
it was snowing last night...
let's hope it will stay cold, but dry so i can set up the pc outside :D

Garrett

01-24-2005, 07:03 AM

cool :D
it was snowing last night...
let's hope it will stay cold, but dry so i can set up the pc outside :D
Just put it in the door opening :D

eva2000

01-28-2005, 08:30 AM

best i've done with new rig 3500+ 90nm and A8N-E

http://fileshosts.com/AMD/Asus/A8NE_Deluxe/results/3500_90nm/kingston/KHX3200K2/3_17/LDT3x/11x/250-250-2226-8-12-2212-1T-1.6-3.6rail-1.67/pifast_43-33.jpg

Zeus

01-29-2005, 04:55 AM

Phase change speeds with plain watercooling :D :

http://img.photobucket.com/albums/v620/Z3us/PiFast4267.jpg

SAE

01-29-2005, 05:07 AM

Phase change speeds with plain watercooling :D :

http://img.photobucket.com/albums/v620/Z3us/PiFast4267.jpg
But that ain't the 2x512mb OCZ EL Plat.rev2, huh?! :D

Zeus

01-29-2005, 05:10 AM

LOL, no.
That's just 1x256mb HyperX BH-5 ;)

SynGroW

01-29-2005, 08:54 AM

New score:
http://www.hardwaredome.nl/images/syngrow/pifast/3984.JPG

Athlon64 3500+ NC CBAXC 0433TPBW @ 3020MHz
MSI K8N Neo2 (vcore + cap modded)
G.Skill PC4800LA @ DDR604 CL2,5-3-3-5 2.9v
OCZ DDR-Booster
Prometeia Mach II r507

@ Zeus: is that the stick (http://www.hardwaredome.nl/images/syngrow/4298.JPG) I think it is? ;)

funkflix

01-29-2005, 10:51 AM

Finally broken the magic 40 Sek. with watercooling! :D Under 3000MHz! :D

http://weber-steuerungstechnik.de/overclock/under40.jpg :

Zeus

01-29-2005, 04:01 PM

@ Zeus: is that the stick (http://www.hardwaredome.nl/images/syngrow/4298.JPG) I think it is? ;)

Wow, didn't realize the potential of this stick... :eek:

LOL, yeah man, that's the one.

At the moment i just don't have the ability to feed it more than a lousy 3.4V but seeing your pic a booster might be in order... :D

My other stick of HyperX 3200 only does 255 with 3.4V :(

Jupiler

01-30-2005, 03:05 PM

My new 3000+ Winnie :

http://users.skynet.be/MetalHead/3000+/pifast4394.jpg

missme

02-03-2005, 08:14 AM

Thx

SynGroW

02-06-2005, 02:35 PM

A_X

02-08-2005, 02:09 PM

http://www.silent-simon.nl/hop/forum/upload/AX/images/2005-02-07_182746_46.09_klein.JPG (http://www.silent-simon.nl/hop/forum/upload/AX/images/2005-02-08_231337_45.89_.JPG)

Hmm, not much compared to those two posts on top of me... :rolleyes:

bachus_anonym

02-08-2005, 02:13 PM

my new achievement ;) ---> 42.39s

http://www.xtremesystems.org/forums/attachment.php?attachmentid=24252&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/outside/30s29s_42s39_LOW.png)

cpulloverclock

02-08-2005, 02:21 PM

my score with a 3000+

http://membres.lycos.fr/cpulloverclock79/Informatique/41.45.gif

A_X

02-08-2005, 02:23 PM

It seems like everybody's AMD64 does 2800+Mhz over here...

Garrett

02-08-2005, 03:01 PM

I've been ashamed for a long time :D

SAE had a faster PiFast score with his Socket A Athlon XP-M... but now I've finally beaten him with my watercooled A64 :)
It was very cold outside and the open door certainly helped ;) :thumbsup:
http://home.planet.nl/~dikke332/4373.png

cpulloverclock

02-09-2005, 11:41 AM

http://membres.lycos.fr/cpulloverclock79/Informatique/40.42.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/40.59.gif

YoupY

02-10-2005, 10:52 AM

New score with BH-5 instead of TCCD

http://www.hardwaredome.nl/images/syngrow/pifast/3955.JPG
39.55s

Specs:

A64 3500+ NC @ 3008MHz
MSI K8N Neo2 (vcore + cap modded)
Corsair TWINX512-3200LLPT v1.1 (BH-5) @ DDR547 3,8v CL1,5-2-2-4
Prometeia Mach II r507
OCZ DDR-Booster

I've made a picture of the screen because Windows XP lite doesn't contain paint :p:

Sorry m8, couldn't resist to beat ya.... :D

http://members.home.nl/youpy/a64prom12.jpg

A64 3500+ NC wk 38
TCCD PC4800 440 chips
Msi Neo2
Cooled by mach2 :D
WinXP

Still want a little more... :D

Can someone tell me if taisaku's result @ 39.45 still is worlds fastest 512kb cache proc. Checked Hexus and Ministry's listings. Are there rankings I should check on??

cpulloverclock

02-15-2005, 02:23 PM

39"75s at 2975MHz with my 3000+

soon I think to break 37"4x at 3150MHz and improve the WR with a 0448SPMW

A_X

02-15-2005, 04:44 PM

AMD64 3200+ @ 2575Mhz

http://www.silent-simon.nl/hop/forum/upload/AX/images/2005-02-16_012340_45.53_B.JPG (http://www.silent-simon.nl/hop/forum/upload/AX/images/2005-02-16_012330_45.53_A.JPG)
45.53sec

Fastest time at this processor speed I think :). Hope my new 3000+ will do 2700Mhz.

LardArse

02-24-2005, 09:06 AM

Dothan 1.8A @ 3.23G:

37.59@ Pifast
http://www.vr-zone.com.sg/Shamino/dothan/pif1.JPG

Cooled at -103C
:)

Zeus

02-24-2005, 12:25 PM

The weak memorycontroller on my CPU didn't allow me to run my 2x512mb sticks of Gskill to take advantage of bank interleave.

So i had to make do with a single stick of 256mb BH-5.

2.95GHz is pretty nice for a watercooled CPU i'd say. :D

http://img.photobucket.com/albums/v620/Z3us/PiFast4223.jpg

The BH-5 is running 1:1 with only 3.39V :slobber:

I wonder if ther is any left--the heatspreader is still on and i'm only running a rather small BI micro II with a rather weak Eheim 1048.

I have a very nice Weapon heatercore + shroud and an Eheim 1250 waiting to be installed. :)
If only time was on my side....

Tom Holck

02-25-2005, 07:12 AM

Dothan 1.8A @ 3.23G:

37.59@ Pifast
http://www.vr-zone.com.sg/Shamino/dothan/pif1.JPG

Cooled at -103C
:)

Nice LardArse,
I alwais wanted to try a Dothan myselfs :cool:
Great potential

LardArse

02-27-2005, 11:27 PM

Thx. Yeah it would be damn cool to run 01 on these :)

cpulloverclock

03-01-2005, 03:01 PM

http://membres.lycos.fr/cpulloverclock79/Informatique/pifast.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/pifast..gif
http://membres.lycos.fr/cpulloverclock79/Informatique/cpumark.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/cpumark..gif

Waus-mod

03-02-2005, 03:02 AM

Really nice cpull! great oc :D :banana:

cpulloverclock

03-02-2005, 02:04 PM

improvement

I dont know if it's a WR with a winchester and a single dod
http://membres.lycos.fr/cpulloverclock79/Informatique/10m.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/10m..gif

YoupY

03-03-2005, 06:39 AM

cpulloverclock

03-03-2005, 07:58 AM

Damn nice pi scores :toast:

Looks like I have work to do this weekend... :D
at 3137.5MHz I'll get 37.7s

at 3.7GHz it's easily possible to break 33s with some optimizations with a FX, I dont know what time makes a FX at the same frequency (3075MHz-3087MHz than my 3000+)

zakelwe

03-03-2005, 10:45 AM

at 3137.5MHz I'll get 37.7s

at 3.7GHz it's easily possible to break 33s with some optimizations with a FX, I dont know what time makes a FX at the same frequency (3075MHz-3087MHz than my 3000+)

Nice scores.

You need to get a video card and do some 3dmark benching cpulloverclock.

Regards

Andy

cpulloverclock

03-03-2005, 11:59 AM

Nice scores.

You need to get a video card and do some 3dmark benching cpulloverclock.

Regards

Andy
no, but it would be funny to bench with vc...

improvement :)

http://membres.lycos.fr/cpulloverclock79/Informatique/10m...gif

I could have a better screen but BSOD with the keyboard and mouse driver (I8042***.sys), a big bug :( :mad:

I think around 3365-3370MHz
http://membres.lycos.fr/cpulloverclock79/Informatique/3306.gif

bad ass