Pifast Benchmark

[Fewture]

Originally posted by SAE
Here's my effort for the Barton party ;)

Oh man..another XP faster than me... :mad: SAE, I'll beat you :stick:

Nice clocks my friend ;) Maybe you should putt it on Ministry.

[SAE]

Originally posted by Fewture
Oh man..another XP faster than me... :mad: SAE, I'll beat you :stick:

Nice clocks my friend ;) Maybe you should putt it on Ministry.

Done :thumbsup:

Already have one at 47.13 :D

Gonna get better :) LOL Fewture's a$$ 's gonna be kicked ;)

[SAE]

Here's my new one :)

[Fewture]

argh!

:p:

Insane time my man. Very nice!! I have a 3GHz Mobile now and 270Mhz BH-5.. Only need a mobo so you better start cranking now ;)

:toast:

[umekami10]

I am not sure… this might be fastest result with Barton chip…??



http://www.vr-zone.com/ocdb/amd_screenshots/181iii.pjpeg


http://www.vr-zone.com/ocdb/amd_screenshots/181ii.pjpeg




Mobil Barton 2400+ AQYHA0413VPKM
2X256MB TwinMos TMD7608F8E50B
Abit nf2-s rev 2 Bios D10
Vcore:2.15 v
VDDR:3.1V
VDD :2.2V
Zelman 400W
Cooling:LN2

[macci]

Crazy stuff umekami! :toast:
Just Crazy :D

That CPU speed with a bit higher FSB would be a total killer!

[bias_hjorth]

Originally posted by umekami10
I am not sure… this might be fastest result with Barton chip…??

Mobil Barton 2400+ AQYHA0413VPKM
2X256MB TwinMos TMD7608F8E50B
Abit nf2-s rev 2 Bios D10
Vcore:2.15 v
VDDR:3.1V
VDD :2.2V
Zelman 400W
Cooling:LN2


that speed.......:eek: :eek: :eek: :eek: :slobber:

[Fewture]

Originally posted by umekami10
I am not sure… this might be fastest result with Barton chip…??



http://www.vr-zone.com/ocdb/amd_screenshots/181iii.pjpeg


http://www.vr-zone.com/ocdb/amd_screenshots/181ii.pjpeg




Mobil Barton 2400+ AQYHA0413VPKM
2X256MB TwinMos TMD7608F8E50B
Abit nf2-s rev 2 Bios D10
Vcore:2.15 v
VDDR:3.1V
VDD :2.2V
Zelman 400W
Cooling:LN2

Not highest Mhz, but fastest PiFast I think. Very xtreme result my man :toast:

[SAE]

Originally posted by Fewture
Not highest Mhz, but fastest PiFast I think. Very xtreme result my man :toast:

Hey Fewture :D ...But it's no 24/7 rig there ;) Ours are :cool:

@umekami10

Sick clocks there :thumbsup: but with LN2 it's not that problem, isn't it ;) ?

[umekami10]

Thanks everyone:)

Macci

There is no way to achieve higher FSB in this ABIT board…Multiplier 13.5 and 14 do not work…over 220 FSB… I can of course run 250MHz low multiplier(under 10)…but no use...



Originally posted by SAE
.....But it's no 24/7 rig there ....

@umekami10

....... but with LN2 it's not that problem, isn't it ;) ?

@SAE

I got that chip a few weeks ago and tried to test it with every possible “cooling means” I got.....

I found the following results:

2550-2600 MHz Air cool
2650-2700 MHz H20
3100-3150 MHz (modified prometiea)
3200-3300 MHZ Dry Ice
3400-3500 MHz LN2


By the way You are absolutely right about 24/7 :)


BUT:

First was testing then arose knowledge…

The best way to find out if it is problematical or not to use LN2 is to test it. I recommend you to try LN2 and tell us later what you finding…. :) :toast:


If you like the results of Dry Ice and Prometiea look at this page...

http://forum.sweclockers.com/showthread.php?threadid=277902&highlight=umekami10

[SAE]

Nice results anyway as I already said :D

What are your 24/7 settings and cooling (prom I assume?!)?

It's a shame this board cannot supply you with higher fsb... :(

(did you already try tictacs latest bioses, L12 mod etc?)

[Fewture]

Originally posted by umekami10
Thanks everyone:)

Macci

There is no way to achieve higher FSB in this ABIT board…Multiplier 13.5 and 14 do not work…over 220 FSB… I can of course run 250MHz low multiplier(under 10)…but no use...





@SAE

I got that chip a few weeks ago and tried to test it with every possible “cooling means” I got.....

I found the following results:

2550-2600 MHz Air cool
2650-2700 MHz H20
3100-3150 MHz (modified prometiea)
3200-3300 MHZ Dry Ice
3400-3500 MHz LN2


By the way You are absolutely right about 24/7 :)


BUT:

First was testing then arose knowledge…

The best way to find out if it is problematical or not to use LN2 is to test it. I recommend you to try LN2 and tell us later what you finding…. :) :toast:


If you like the results of Dry Ice and Prometiea look at this page...

http://forum.sweclockers.com/showthread.php?threadid=277902&highlight=umekami10

Mod the hell out of the board! Do the 3 in 1 mod. 240 is easily doable :)

[rude]

Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG

[bias_hjorth]

rude


seems a bit low score for the overall speed! Slow memory timings?

[rude]

Originally posted by rude
Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG
Memory is running at 2-2-2-5-11-16, if I put it like 2-2-2-5-7-16, it wont run above 240 mhz :mad:
This is slow, I think that is just the new stepping, it goes higher, but performance is poor. LDT is 2X and tREF is 2x3120, I dont know about tREF, which one is fastest of those many options:confused:

[Endre]

I just tested PiFast a little for the first time, I have only tested with SuperPI before. I like it. :)

Tested with "low" CPU speed, I'll see if I can get any higher later. Will see if I can get sub-50s. :)

http://home.no.net/endreke/bilder/PC/PiFast_51.31.JPG

Setup in sig, that's air cooled 2400 35W, NF7 and TwinMOS BH-5@2-2-2-11.

I just looked at the ranking list... is this really the fastest air cooled Barton? Extreme air people, wake up! :D

Edit: From what I can see there is no one with none chilled water that's faster either. Hm... I'm not impressed by the water and air OC'ers. :)

[Fewture]

Originally posted by Endre
I just tested PiFast a little for the first time, I have only tested with SuperPI before. I like it. :)

Tested with "low" CPU speed, I'll see if I can get any higher later. Will see if I can get sub-50s. :)

http://home.no.net/endreke/bilder/PC/PiFast_51.31.JPG

Setup in sig, that's air cooled 2400 35W, NF7 and TwinMOS BH-5@2-2-2-11.

I just looked at the ranking list... is this really the fastest air cooled Barton? Extreme air people, wake up! :D

Edit: From what I can see there is no one with none chilled water that's faster either. Hm... I'm not impressed by the water and air OC'ers. :)
Lookin'good m8. Crank it up and show us some 49ers :cool:

[Endre]

Originally posted by Fewture
Lookin'good m8. Crank it up and show us some 49ers :cool:
I'll see what I can do, although I only have an MCX462-V to cool with, and it's getting hot here now.

Which program do you guys get the higher CPU speed in, SuperPI or Pifast? I could do SupePI 1M up to 2815 or so last night... hope to get something like that later today in Pifast.

Saw at Ministry that HaLDoL has 50.43 with aircooled M2500. I'll try to beat that first. :)

[zyx]

:p: with 3-2-2-8

[bias_hjorth]

OCz EB stuff?

[Endre]

Improved a little... not 49 though, I need higher FSB. :(

http://home.no.net/endreke/bilder/PC/PiFast_50.50.JPG

[zyx]

Originally posted by zyx
:p: with 3-2-2-8

yea but i dont have no means good unbuffering bandwidth.

[Fewture]

Originally posted by Endre
Improved a little... not 49 though, I need higher FSB. :(

http://home.no.net/endreke/bilder/PC/PiFast_50.50.JPG
Just 2 more Mhz on FSB should do it.. Maybe talk nice to your rig? :p:

[Endre]

Originally posted by Fewture
Just 2 more Mhz on FSB should do it.. Maybe talk nice to your rig? :p:
LOL, well, I guess I'll try everything. :D

[Garrett]

OMG :slobber: on air 2.8Ghz, I gotta have me one of those :stick:
http://home.planet.nl/~dikke332/5158.jpg
I think I can reach 250 on the memory which is holding me back, but I'll need more than 3.5v on it... Maybe I will try 3.6 :D

Just have to turn up the VR on the 3.3 sense line I guess ;)

[SAE]

:D :thumbsup:

[Garrett]

Fastest Socket A @ PiFast, eh 'Kumpel'? ;)
Whoops... seems not: umekami10 45.75 sec 3368 mhz memory 448 mhz Mobile Barton XP-M 2400+
Du hast noch was zu tun :D ;)

Still quite impressive... damn :slobber:

[Endre]

267x11.5 :slobber:

Very nice!

[SAE]

Originally posted by Garrett
Fastest Socket A @ PiFast, eh 'Kumpel'? ;)
Whoops... seems not: umekami10 45.75 sec 3368 mhz memory 448 mhz Mobile Barton XP-M 2400+
Du hast noch was zu tun :D ;)

Still quite impressive... damn :slobber:

Maybe I'll g(e)t him, hehe ;)

If I only could do 268 now. Maybe I'll go higher vdimm, am at 3.45V now... (but I am afraid the board won't do more)

P.S. Umekami has 300MHz more cpu clocks with the help of dryice :D

[Garrett]

I've had the vdimm @ 3.5v... on EPoX 8RDA+ :D

You should definitely try higher!!
Stable or not, the scores count!!!

[SAE]

Originally posted by Garrett
I've had the vdimm @ 3.5v... on EPoX 8RDA+ :D

You should definitely try higher!!
Stable or not, the scores count!!!

It's not that I didn't have the voltages this high, I would run 3.5V 24/7 if it would gain me something... but it seems not with those nforce2 boards as they're limited by heat and other chipset internal features...

P.S. Due to a short in vdimm mod I had aleady 3.88V there and it did not load windows (bluescreen) :D

[umekami10]

Originally posted by SAE




Good job :):toast:

[SAE]

Originally posted by umekami10
Good job :):toast:

Thanks umekami.

P.S. YGM :D

[nutcase]

Ok.. I will post this one...

Asus P4C800-E Dlx (all mods)
P4C 2.8C M0 stepping
OCZ PC4200 EL (2x256Mb) @ 2.5-4-4-7 (3.25v Vdimm)
Cpu Cooled with Prometia Mach I (completely stock).

[Fewture]

Originally posted by SAE
:D :thumbsup:

Enough is enough m8.. you make me look noobish :mad:

[CodeRed]

Got a small update :)

http://users.tpg.com.au/spark69/an50r/pifast41.20.jpg

gotta try a few more runs and see if I can crack that 41 sec barrier

[YoupY]

Also a small update:

http://members.home.nl/youpy/a64prom6_small.jpg (http://members.home.nl/youpy/a64prom6.jpg)

[eva2000]

nice one hag6br

mines close spec wise to your setup

2.8C SL6Z5 MO with SP94 + 92x38mm Sunon 120cfm fan
Asus P4C800-E rev1.02 1016 bios stock NO mods
2x 512MB OCZ PC4400 Performance Series DC kit @ 280mhz 3-4-4-7 at 2.85v vdimm

Win2k PRO SP4 OS

http://www.fileshosts.com/pentium4/D1/asus/p4c800e_results/SP94/2.8C_SL6Z5_B558/SP94/OCZ/PC4400/2x512/HToff/280-280-3447-8-1.875-2.85-1.7-PAM-Turbo_72-36/pifast.jpg

[SAE]

Originally posted by Fewture
Enough is enough m8.. you make me look noobish :mad:

Hehe. Did not wanna make you sad ;) I like you Fewture and we have very similar systems... :thumbsup:

I can go higher too :D

But it's not always stable, cr*p DFI LP :rolleyes:

[SAE]

Update :D

[HaLDoL]

Originally posted by Endre
I'll see what I can do, although I only have an MCX462-V to cool with, and it's getting hot here now.

Which program do you guys get the higher CPU speed in, SuperPI or Pifast? I could do SupePI 1M up to 2815 or so last night... hope to get something like that later today in Pifast.

Saw at Ministry that HaLDoL has 50.43 with aircooled M2500. I'll try to beat that first. :)

Try me :)
nice cpu overclock, a bit more fsb and you'll go sub 50 in no time.

[Endre]

I did some tweaking, and I would at least have got you... but then, dead NF7. :(

But I'll get a Mach 1 now (around June 10), then I hope sub 50 won't be a problem. :) It's getting too hot for good results with air now, it will be a relieve.

[CodeRed]

A few more tweaks and I cracked that 41 sec barrrier :banana:

http://users.tpg.com.au/spark69/an50r/pifast40.80.jpg


Now whats it gonna take to break 40 sec with non-FX chip :D

[Tom Holck]

Originally posted by cpulloverclock
I have a job for u
try a

- 1M digits of PI and u'll get a 26s like Hideo
http://www012.upp.so-net.ne.jp/ohij2/2350-26.gif

- 8M digits (05'04 to beat) http://www.geocities.co.jp/SiliconV...fx/504-3199.gif

- cpumark (376 to beat)
http://www.coolaler.com/~coolale/3010_32mtop.gif

many challenges

Hi Cpulloverclock,

now I have finaly done 24 sek i M1 as you can see in the SuperPi sektion.:banana:

What is the CPUmark record now?

Just done this:

3402 Mhz

[Tom Holck]

Fast CPU speed but slow mem timings.
The SK8V sometimes make "jump" in multi/FSB

[SAE]

Nice, Tom :D

7.5sec faster than me, but I am the no.1 AXP in pifast, hehe...

I wonder what you're able to get with those S939 in the near future ;) (mem can go way faster then and that's what rocks pifast)

[rude]

Originally posted by rude
Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG
Little bit improvement with bios settings :p:
http://koti.mbnet.fi/rude1/Kuvat/A64/A64_43.94.PNG

[pkrew]

Here's my best attempt thus far.

[oc-rookie]

Originally posted by pkrew
Here's my best attempt thus far.

Very nice, Pkrew!

[pkrew]

Thanks bud, looks like you're kicking some major butt there. Sweet scores :toast:

[DMylonas]

My score with my signature machine....

[cpulloverclock]

Originally posted by Tom Holck
Hi Cpulloverclock,

now I have finaly done 24 sek i M1 as you can see in the SuperPi sektion.:banana:

What is the CPUmark record now?

Just done this:

3402 Mhz hi, yes now you've got the world record :toast:


congratulations

[Endre]

432 CPUmarks... wow... and I think this result is pretty good...

http://home.no.net/endreke/bilder/PC/CPUMark_274.JPG

Hehe... could have got more with 246 or 247x11.5 though, but when I had modded the board I couldn't get that CPU speed (warm weather... air cooling sucks).

Anyways... great benching Tom. :toast:

[zyx]

:)

[CodeRed]

zyx,
what mobo, bios and mem timings you running?

[zyx]

shuttle an50r bios for this fast pi 00 and timings is 3-2-2-10

[umekami10]

Originally posted by SAE
Update :D




Excellent done… 45.53 is just amazing with Barton/Prometiea :)

[SAE]

Originally posted by umekami10
Excellent done… 45.53 is just amazing with Barton/Prometiea :)

Thanks :D

Clocked the fsb like hell :D

FSB gains more than cpu, best is to up them together ;)

[Fewture]

Originally posted by SAE
Hehe. Did not wanna make you sad ;) I like you Fewture and we have very similar systems... :thumbsup:

I can go higher too :D

But it's not always stable, cr*p DFI LP :rolleyes:

:D ;)

Ok...I have a 2600+ M coming soon and if I have time tomorrow I will get a new Infinity (saved up change :p:) . I have to go to the shop and pick it up, so gotta find some time. If I let them send it it will take ages (weeks).
If I don't kick yer a** then I will go to DaBit's and shove his cascade on it :mad: LOL :D

Happy tweakin' m8! :toast:

[SAE]

Originally posted by Fewture
:D ;)

Ok...I have a 2600+ M coming soon and if I have time tomorrow I will get a new Infinity (saved up change :p:) . I have to go to the shop and pick it up, so gotta find some time. If I let them send it it will take ages (weeks).
If I don't kick yer a** then I will go to DaBit's and shove his cascade on it :mad: LOL :D

Happy tweakin' m8! :toast:

That's unfair... same conditions pal :D

Try to beat me with tweaking since my LP B is dead (accident :rolleyes: ) and I only have a crappy infinity here ;)

[Fewture]

Originally posted by SAE
That's unfair... same conditions pal :D

Try to beat me with tweaking since my LP B is dead (accident :rolleyes: ) and I only have a crappy infinity here ;)

Well..you have a GT and I have a M1 507.. dunno about that.. We'll see.. Probably pick a board up tomorrow morning. Dunno when I'll get the 2600's. Hope next week. In the meantime I putt my 3GHz mobile in it, but I doubt that will be fast enough.. On the other hand..my other Mobile didn't go as fast in my NF7.. Got 2850 out of it with 2.2V and it did 2960 with 2.12 in the DFI. So maybe my 3Ghz chip will go a bit faster on the DFI :D Time will tell..

[SAE]

Originally posted by Fewture
Well..you have a GT and I have a M1 507.. dunno about that.. We'll see.. Probably pick a board up tomorrow morning. Dunno when I'll get the 2600's. Hope next week. In the meantime I putt my 3GHz mobile in it, but I doubt that will be fast enough.. On the other hand..my other Mobile didn't go as fast in my NF7.. Got 2850 out of it with 2.2V and it did 2960 with 2.12 in the DFI. So maybe my 3Ghz chip will go a bit faster on the DFI :D Time will tell..

I have to fight with a lame infinity :(

Chances are good :thumbsup:

[derbis]

Start : Fri Jun 04 21:18:48 2004
End : Fri Jun 04 21:20:00 2004
Duration : 71.67 seconds
================================================== ==========
Total computation time : 71.67 seconds (~ 0.02 hours)
================================================== ==========

Intel Celeron 2GHz @ 3.2GHz (FSB160)
2x256 MB Infineon 6A @ 200MHz CL2-2-2-5
Asus P4C800 Rev.2

[JacobHansen]

HARDiNFO Power :O

( www.hardinfo.dk / www.hardinfo.com )

http://www.tweak.dk/forum/attachment.php?attachmentid=1514&sid=

[derbis]

Not fast, but a little faster than my last one ;)

[Tom Holck]

Originally posted by JacobHansen
[B]HARDiNFO Power :O

( www.hardinfo.dk / www.hardinfo.com )



Nice Jacob,
:toast:

what corevolt?

[JacobHansen]

Max at the SK8N - Can´t remember how much exactly..But around 1.7-1.8. maybe

[hipro5]

Here's a new one of mine...Still testing.......

Pentium4 3.4GHz EE....AT 1:1 CPU:RAM....

[zyx]

hipro :toast: :toast: :toast: :toast:

[hipro5]

Way to go zyx...... :D :toast:

[bias_hjorth]

very impressive both of ya :D :)

[hipro5]

Thank you bias_hjorth :D :toast:

[Fewture]

Originally posted by SAE
I have to fight with a lame infinity :(

Chances are good :thumbsup:

Well, my new cpu is up to it I think.. there's still some room to go up.

http://www.fewture.cistron.nl/147_31192.09Vsmall.JPG

Tomorrow I maybe have a board that can pull some nice fsb's. Got some better mem too. Shooting again for #1 prom/XP @ pifast. ;)

Edit:

Oh..cpu is a 2600+ M 0351 MPMW. Tested 3 of them..all 3Ghz prime stable :eek:

[Endre]

Originally posted by SAE
Thanks :D

Clocked the fsb like hell :D

FSB gains more than cpu, best is to up them together ;)
Mhm... PiFast really likes high FSB, more than Super PI.

Got a new NF7. My... um... fourth. Does at least 238 for PiFast completely stock. I'm hoping it will do 250 with mods. But I doubt it's the 255+ wonder board I was hoping for. :D

[SAE]

Good luck with the boards, both of ya :thumbsup:

Mine is crappola again... :rolleyes:

[bias_hjorth]

ahh clash of the titans :D
looking sweet fewture.. I´ll bet you´ll have it by the end of the day :-)

[Endre]

Can't wait to get that prommy... but it may take a little while. I doubt I'll have a chance against you SAE and Fewture but at least I can try to be the 2nd fastest with NF7 (behind umakemi). If the the board will will do decent FSB speed, that is (245+).

[Fewture]

Originally posted by bias_hjorth
ahh clash of the titans :D
looking sweet fewture.. I´ll bet you´ll have it by the end of the day :-)

Lets hope so.. SAE is picking up some nasty clocks lately :eek: Would be nice to beat him. Give the bugger some work to do ;) hehe

[Mongoose420]

best so far on retail cooling async

http://www.mechwarrior.tv/pictures/SS/260x10pifast.jpg

[derbis]

Yesterday i changed my Celeron 2GHz @ 3.3GHz with a Pentium4 3.0GHz (NW)

Here my new score, the CPU is able to run faster but my cooler is too bad for it. Also my memory is too bad, this crapy Infineon 6A only do 220MHz 1:1 so i must use the 5:4...

[Yorky]

35s At most

2.4G A64+K8T800 with Micron DDR400@DDR480 5-2-2-2.5

[hipro5]

UPDATE......

1:1 CPU:RAM with a P4 3.4GHz EE......

[bias_hjorth]

damn you´re on a roll :)
I was wondering if you changed to cascade like you mentioned or is it still the good´old prommy?

[hipro5]

Originally posted by bias_hjorth
damn you´re on a roll :)
I was wondering if you changed to cascade like you mentioned or is it still the good´old prommy?

It's a "hi-pro-mie" ......Moded with R410 gas........NO cascade..........yet...... :D

[bias_hjorth]

hehe very impressive.. Performance wise how´s the r410 compared to r507 and r404?

[hipro5]

Originally posted by bias_hjorth
hehe very impressive.. Performance wise how´s the r410 compared to r507 and r404?

I got about 7-9*C in full load colder than the R404........But I've moded more the Promie......

[Dani]

Just under 52s. with my Abit NF7-S, Barton 2500+ (non mobile) and HOT WATER..(26ºC)
Need some DI or LN2 :stick:

http://muljas2.mine.nu/dani/Tietokone/Abit%20NF7-S%20ver2.0/Abit%20NF7-S%20ver2.0%20Hexus%20Barton2500+%202663MHz%20253FS B%2051.99.gif

[CodeRed]

A few tweaks, a few more MHz and a new score :D

http://users.tpg.com.au/spark69/an50r/pifast40.63.jpg

[.OverclockMan.]

SUPER PI
35S MY MACHINE IS GOOD?

[SAE]

Originally posted by .OverclockMan.
SUPER PI
35S MY MACHINE IS GOOD?

Wrong thread :D ;)

[shidokanjohn]

Originally posted by CodeRed
A few tweaks, a few more MHz and a new score :D

http://users.tpg.com.au/spark69/an50r/pifast40.63.jpg

Very nice score :toast:

[Nikita]

Update, new CPU new score!!

XP-M 2400+
NF7-S v2.0

http://www.hpautoelectrics.com/OverClocker73/XP-M%202400+/12.5x225%20pifast.jpg

Still testing!!

[CodeRed]

Originally posted by shidokanjohn
Very nice score :toast:

thanks man, I am still a bit short of my 40 sec goal with this chip. Need to find another 50 Mhz from somewhere :)

[Tom Holck]

Originally posted by CodeRed
thanks man, I am still a bit short of my 40 sec goal with this chip. Need to find another 50 Mhz from somewhere :)

The difference 32 bit OS kontra 64 bit OS is about 40 mhz at your speed.

That meens if you was going 64 bit the time will be as if you was going 40 mhz faster in 32 bit.

I found 2003 64 bit a tad faster than XP 64 bit;)

[CodeRed]

Originally posted by Tom Holck
The difference 32 bit OS kontra 64 bit OS is about 40 mhz at your speed.

That meens if you was going 64 bit the time will be as if you was going 40 mhz faster in 32 bit.

I found 2003 64 bit a tad faster than XP 64 bit;)

Ive tried Win2003 server (32 bit version) and got the same result. I must be doing something wrong with my OS tweaks, tried every common trick :(

I'll give the 64 bit 2003 a try next week.

[Nikita]

Update ;)

http://www.hpautoelectrics.com/OverClocker73/XP-M%202400+/13x225%20pifast.jpg

[derbis]

AthlonXP 1700+ (DLT3C) @ 2.42GHz (FSB220)
Abit NF7 Rev1.2
2x256 MB Samsung PC3200 @ 220MHz CL2.5-3-3-11
WinXP Pro SP1

[aoc007]

Heres mine:
I need volt mods :(

[HaLDoL]

World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg

49.86sec/NF7/BH5/XPM

[SAE]

Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg

49.86sec/NF7/BH5/XPM

Wow, congrats :thumbsup:

Nice one :)

[Endre]

Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg

49.86sec/NF7/BH5/XPM
Very nice. :toast:

I could've had that WR... well, atleast for a while. :)

BTW, whats your Super PI, 35 or 34s?

[Nikita]

Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg

49.86sec/NF7/BH5/XPM
Did you have to do the L12 mod to get that FSB?
And if you did, what was your highest FSB before the mod?

[HaLDoL]

Have not tried superpi 1M. Did 2M and it was 1m21s.
Yes I did the L12 mod, otherwise it was no go above 240 FSB.
But I'm into DFI benching now and I'm sure I can do better ;)

[CodeRed]

Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg

49.86sec/NF7/BH5/XPM

HaLDoL,

I hate you (j/k) :D

it took me 7 CPUs and an R404a mod to my prommy to break 50 sec with the XPs and you go and do it on AIR !!!!!



excellent job :toast:

[Nikita]

Hey guys, do you mind telling me what the tweaks are for WinXP and Win2K, if there’s any!!

Thanks.

[hipro5]

WELL DONE on AIR...........Air counts first........ ;) :toast:

[LikwidKool]

Here's my best so far with my 3200+ and K8Npro on water. Still can't get down to this score with my K8NSpro:rolleyes: Off by a half second.

[yuri]

No vmodds / stock mach 1 / in a closed case


http://24.158.154.102/images/42.42pifast.jpg

[bias_hjorth]

impressive that stock mach I is able to oc the processor that high :)

[yuri]

Originally posted by bias_hjorth
impressive that stock mach I is able to oc the processor that high :)

:D

http://24.158.154.102/images/42.30pifast.jpg

ok, thats all i got, 1 more fsb was like pulling teeth :p:

[Jeff]

Just playing with some new hardware...
http://www.myfavoritehacker.com/somepictures/PiFast-44.72b.png
(A64 3200+ NewCastle, Corsair XMS3500, Epox 8KDA3J, and an R507'd Mach1)
http://www.myfavoritehacker.com/somepictures/258MHz-FSB.png

[SAE]

Originally posted by Jeff
Just playing with some new hardware...
http://www.myfavoritehacker.com/somepictures/PiFast-44.72b.png
(A64 3200+ NewCastle, Corsair XMS3500, Epox 8KDA3J, and an R507'd Mach1)
http://www.myfavoritehacker.com/somepictures/258MHz-FSB.png

:lol:

Jeff, did you give up these un-nerving AXPs??? :D

BTW, looking good :thumbsup:

[Jeff]

You can say that. I'm still using them in the farm but my "fun" rig is staying A64 from here on out. :)

[YoupY]

Originally posted by Jeff
Just playing with some new hardware...
http://www.myfavoritehacker.com/somepictures/PiFast-44.72b.png
(A64 3200+ NewCastle, Corsair XMS3500, Epox 8KDA3J, and an R507'd Mach1)
http://www.myfavoritehacker.com/somepictures/258MHz-FSB.png

Nice one :toast:

You beat me by 0.06s :( ;)

[SAE]

New record :D

[Riverna]

My Score. Is it ok?

http://www.forumdeluxx.de/gallery/data/500/8886cmd.JPG

[YoupY]

Originally posted by SAE
New record :D

Wow, that's sick man :slobber:

Can you squeeze more out of it ??

[SAE]

Originally posted by YoupY
Wow, that's sick man :slobber:

Can you squeeze more out of it ??

Maybe, with timings... maybe lower fsb and higher clocks? Dunno... maybe 0.1s! :D

[Jeff]

That's very nice SAE. :up:

[CodeRed]

Originally posted by SAE
New record :D

man thats nice :toast: :toast:

you're putting a lot of A64 owners to shame there :)

[Learn]

Originally posted by SAE
New record :D

congrats, nice... for sure

[SAE]

Thx to all of ya, pals :D

It's quite a bit of work to further improve that ;) (I decreased my former phasechange record time by nearly 1second)

[Jeff]

Originally posted by CodeRed
you're putting a lot of A64 owners to shame there :)

I resemble that remark. ;) I had a 44.52 but it had the dreaded ***ERROR***.

Man... the more I look at your time SAE the more in awe I am. Really nice work! :toast:

[SAE]

Hehe. I know that ***Error*** too well ;)

I did not have it today, but sometimes when vcore was too low, or something like that. I also can do 12x270 (I was stunned seeing that), but it would never complete or throw that error :(

[yuri]

Here is my new high score no vmodds in a closed case stock mach1 promme. :D i believe its #14 overall

http://24.158.154.102/images/41.97.jpg

[kakaroto]

EPoX 8KDAJ fully modded / Stock Mach 1 / 1.68v-1.7v

http://www.xs4all.nl/~famchow/A64_3400/Pifast_2.84GHz.PNG

playing further ... :cool:

[YoupY]

Kicked your ass ...

Let's see your reply to this...

http://members.home.nl/youpy/a64prom7_small.jpg (http://members.home.nl/youpy/a64prom7.jpg)

I need some EB's though :| to go harder, mem doesn't coorperate very well.

[kakaroto]

yes indeed you did it, good job :toast:

[bias_hjorth]

Originally posted by SAE
Hehe. I know that ***Error*** too well ;)

I did not have it today, but sometimes when vcore was too low, or something like that. I also can do 12x270 (I was stunned seeing that), but it would never complete or throw that error :(

very nice.. was that a 2k3 run?

[SAE]

Originally posted by bias_hjorth
very nice.. was that a 2k3 run?

No (win2k), and the DFI is sooooo finicky, it sometimes runs this high, and another try results in a lockup :(

But 12x268 runs fine :D

[bias_hjorth]

hehe I think we can both agree on that.. G8 job buddy :toast:

[SAE]

Thx :D

Anywhere in these clocks are the limits of the AXP platform... :(

[YoupY]

Score update :D

http://members.home.nl/youpy/a64prom9.jpg

Vcore @ 1.85
Vddr @ 3.1V

Still want to go faster

[derbis]

Today i queeze some more out of my XP :)

Here ya go....

[kakaroto]

i already have tread posted with the results: http://www.xtremesystems.org/forums/showthread.php?s=&threadid=39307

Stock mach I / full modded EpoX

http://www.xs4all.nl/~famchow/A64_3400/Pifast_2.98GHz.PNG

soo close to the 3GHz :D

[Garrett]

Netjes Kakaroto ;)

Any way you can reach the magic marker of 3 ghz? ;)

[Fewture]

Some nice dutch luvin' here! :D Great work guys ;)

[YoupY]

Thanx Few

Couldn't resist the temptation, and the fact I still had another dutchy with a faster score than me :

http://members.home.nl/youpy/a64prom11.jpg

8th place on ministry (www.ministryofoverclocking.net/contests) is mine :D

Waiting for Kakaroto's reply........

[kakaroto]

Try to run it one more time 2996MHz. Then i should hit the 42.1x.

Tried 290x10, but my BH-5 maxed out to 288MHz 2-2-2-5 @3.8v. The board maybe holding back my mem, but im not sure.
I do 280Mhz @3.4v...:confused:

Next week think i will refill my Mach1 with R507. Then 3GHz has to be easy to hit. I like your -40C idle :D

[PMM]

Well done all esp SAE ;)

Just posting to say i'm still around just finished updating the tables its upto date as of 2 mins ago.


Just so people are aware daily / weekly updates went out the
window as i needed to spend less time on PC stuff and more
time on RL stuff.

But I'm still commited to updating, but it may be a month apart
between updates i'll never let it span more than month though.

I'm in the need to revise how the system work's as the file size
is over 600K now and on dialup thats an issue for me so thats
another reason for doing less frequent updates.

anyway keep up the good work folks :)

[SAE]

Originally posted by PMM
Well done all esp SAE ;)

Just posting to say i'm still around just finished updating the tables its upto date as of 2 mins ago.


Just so people are aware daily / weekly updates went out the
window as i needed to spend less time on PC stuff and more
time on RL stuff.

But I'm still commited to updating, but it may be a month apart
between updates i'll never let it span more than month though.

I'm in the need to revise how the system work's as the file size
is over 600K now and on dialup thats an issue for me so thats
another reason for doing less frequent updates.

anyway keep up the good work folks :)

Thx, that's gr8, pal :)

I see there now are two more a64 in front of me ;) Rank 29 for only an outdated XP ain't that bad ;)

[sysfailur]

Been a while since I've last put a score up here but hey, why not?

Got a new A64 3500+, Asus A8V and gig of HyperX PC4000....

Voltage mods are in order of course but I just got the board today. Aircooled btw w/ Zalman chunk of copper on it.

First up... as I didn't really know how to decipher the mem settings.. as there seems to be ALOT more than what I'm used to, I haven't changed anything but cas to 2.5.... And w/ that change and leaving the rest the same.. voltage @ 2.8v I got 263mhz.

http://www.maximumoc.com/img/hardware/a64_3500+/4938_hexus_pifast.jpg


And this score was a smidget faster.. my fastest I've hit thus far aircooled.

http://www.maximumoc.com/img/hardware/a64_3500+/4927_hexus_pifast.jpg

It really seems that the A64 loves more mhz rather than FSB. At least on this particular bench. When I have more time tomorrow I will be sure to run 3dmark and other benches. I also have a 6800 128mb (until the ultra comes out) to hold me over.

Also if interested...

3500+ ADA 3500DEP4AW
CBAVC 0420RPMW

Malaysia

A8V -- Rev 1.02, 0418CD

[GomerPyle]

FX-53 939 running 11 x 265 :)

http://www.overclocking.dk/img/users/23219_09.jpg

[Tom Holck]

Originally posted by GomerPyle
FX-53 939 running 11 x 265 :)

http://www.overclocking.dk/img/users/23219_09.jpg

Well GomerPyle, it's not faster than SK8V at the same CPU speed:rolleyes:

whats your timings at 265?

[GomerPyle]

Tom the timings are 2-2-2-6. Will try for 268-269 x 11 soon I hope.

[Blergo]

ok, if this is the same version of pifast that we use over at www.ministryofoverclocking.net then my best so far is 72.00 seconds :) thats on my XP2400+ with 256mb of ram, haveing problems geting a stable enough overclock to run at any decent overclock atm, think its due to my 5V rail being at 4.7V, hopefully that time will improve soon though :)
owen

[Tom Holck]

Originally posted by GomerPyle
Tom the timings are 2-2-2-6. Will try for 268-269 x 11 soon I hope.

Well not bad:toast:

One day I think You must come to my place with that mob,
We will put it unter the Cascade -120c and do x13 :banana:

Btw I have another cascade at -112c for the ATI with a standard Prommy heat, just to mount on it..

:D

[GomerPyle]

Can I have a cascade or do I have one build myself? :D

Sure I can come visit you some day.....could get quite interesting with some good cooling.

[Pejsen]

Nice :)

[The Doctor]

DFI Infinity + XP-M 2600+ @ DI

My 1st DI run im going to run in again soon with ethanol or acetone instead of denaturalised alcohol (ethanol should give much better temps than the dena alcohol).

The second problem i had was that the board had problems on mp 12/12,5 the cpu didnt get above 3050 on those multis (sill don’t know what the problem was).

http://home.kabelfoon.nl/~vnrswk/4643.jpg

[RocKer]

Hi guy's at Xtreme,my first posting on this board will bi my fastest pifast with my not yet modded Epox(working on it)mobo+xp-m-2600+.

Am here to learn more(at my age:p:) about oc'n en cooling my rig,i have also a beercooler,but am yet not confidant with insulating of my mobo+cpu,cus its hard to find the proper stuff to do it with arond here,and not a lot help to,so shoot guys am hungry.
Here it is (http://users.pandora.be/RocKer/PIfast/Nieuw%20PiFast%204.1/52.92sec.bmp)
pic of my beercooler (http://users.pandora.be/RocKer/Bierkoeler/Binnenkant%20bierkoeler.jpg)

Don't mind my english,its not so good;) .

A see a lot of guys from GoT to here:cool: .

[kakaroto]

http://www.xs4all.nl/~famchow/A64_3400/Pifast_3.0GHz.PNG

3GHz reached at last :toast:

With Mach 1 R507 , Vcore 1.88v, Vddr 3.38V, Vchip 1.6v on a 8KDAJ fully modded!:toast:

[InsaneMan]

Originally posted by RocKer
Hi guy's at Xtreme,my first posting on this board will bi my fastest pifast with my not yet modded Epox(working on it)mobo+xp-m-2600+.

Am here to learn more(at my age:p:) about oc'n en cooling my rig,i have also a beercooler,but am yet not confidant with insulating of my mobo+cpu,cus its hard to find the proper stuff to do it with arond here,and not a lot help to,so shoot guys am hungry.
Here it is (http://users.pandora.be/RocKer/PIfast/Nieuw%20PiFast%204.1/52.92sec.bmp)
pic of my beercooler (http://users.pandora.be/RocKer/Bierkoeler/Binnenkant%20bierkoeler.jpg)

Don't mind my english,its not so good;) .

A see a lot of guys from GoT to here:cool: .

Your '' KI '' is PowerFull
See Ya .. KamehameHaaa :smileysex

[SAE]

New top one from me for Athlon XP platform :D

[saaya]

ohhhhhhhhh woooooowwww :slobber:
congrats man! very nice! :toast:



still gotta work on the desktop background though ,stefan ;)
hehehe:D


btw, theres a 5mm thick layer of snow/ice on the cold plate of the tec now! hehe, will try it with 12 now.

[SAE]

Originally posted by saaya
ohhhhhhhhh woooooowwww :slobber:
congrats man! very nice! :toast:



still gotta work on the desktop background though ,stefan ;)
hehehe:D


btw, theres a 5mm thick layer of snow/ice on the cold plate of the tec now! hehe, will try it with 12 now.

Thanks, my friend :D

The background is a macro shot from desert... :p:

[kakaroto]

Insane result SAE. Thnx for posting on MoFOC. :)

Making lot of A64 users embarrising. ;)

[SAE]

Originally posted by kakaroto
Insane result SAE. Thnx for posting on MoFOC. :)

Making lot of A64 users embarrising. ;)

:lol:

Yeah... I thought, I update all the sites at once :D Hexus.net too.

I think Fewture will luv it ;).
I don't wanna make him angry though. He's a good man, you know.

[SAE]

Hmm... what should I say ??? :D

[YoupY]

Originally posted by SAE
:lol:

Yeah... I thought, I update all the sites at once :D Hexus.net too.

I think Fewture will luv it ;).
I don't wanna make him angry though. He's a good man, you know.

ROFL. He will get over it, don't worry ;) I believe he gets his hands on a new dfi today.


Congrats on a totally insane score :toast: How the hell did you manage to achieve this, this is just plane sick :D

[Garrett]

He'll be scoring 43.xx mark my words :thumbsup: :toast:

[SAE]

Originally posted by YoupY
ROFL. He will get over it, don't worry ;) I believe he gets his hands on a new dfi today.


Congrats on a totally insane score :toast: How the hell did you manage to achieve this, this is just plane sick :D

Thanks, pal. Hope you update it on Mofoc!? ;)

How I managed it? Hmm... :idea: I 've been blessed by the OC-god ;)

(many mods, good ram, great cpu, good cooling, humm... anything else??)

[Mongoose420]

http://www.mechwarrior.tv/pictures/SS/45.05pifast.jpg

not bad for air cooling. fastest air cooled score afaik.

[YoupY]

Your score has been checked and passed of course

:off:
Can you give me the number of your god. I can use his blessings too ;)

[kakaroto]

Another push on my 3400+ Newcastle. :D

Fastest Newcastle core on Hexus. (Macci got a clawhammer 3000+? )

Soon i will buy a DFI, hopefully doing 3.1GHz.

http://www.xs4all.nl/~famchow/A64_3400/Pifast_3.04GHz.PNG

[SAE]

Originally posted by YoupY
Your score has been checked and passed of course

:off:
Can you give me the number of your god. I can use his blessings too ;)

Thx.

Ermm... the number of my god? It's not my god BUT ours :D So you have to pray to him periodically, and may get blessed too, later ;)


/edit.

Kakaroto, great score, pal :thumbsup:

[Fewture]

Originally posted by SAE
Hmm... what should I say ??? :D

OOOoooowww dude... I don't think I can beat that..

New mobo arrived, I'll give it my best, but this...man..this is insane.

:toast:

3250..yeah, in my dreams! Holy shh..

[SAE]

Originally posted by Fewture
OOOoooowww dude... I don't think I can beat that..

New mobo arrived, I'll give it my best, but this...man..this is insane.

:toast:

3250..yeah, in my dreams! Holy shh..

:lol:

Pal, you know we'll stay friends, even when you get me ;) :D

[The Doctor]

1st of all verry verry nice score SAE :toast:

http://home.kabelfoon.nl/~vnrswk/4577.jpg

Fastest score i could get out of my infinity and 2600+ MPMW 51 on DI :( .
On multi's 12 and 12,5 my cpu wouldn’t go above 3060 and on 13 it only did 3166 the same cpu does 3120 under fewture’s prom.
Definitely something wrong with the board or cpu but i just cant figure it out :mad:

Pic of the setup:
http://home.kabelfoon.nl/~vnrswk/setup.jpg

top meter displays nb and sb temps (both -) the other meter displays the temprature of the baseplate and the min base temp.

[Fewture]

Originally posted by SAE
:lol:

Pal, you know we'll stay friends, even when you get me ;) :D

Well, maybe with a cascade.. My cpu just won't run those speeds. And since you're running about the max fsb on K7 possible..I don't see a real chance..

[SAE]

Originally posted by Fewture
Well, maybe with a cascade.. My cpu just won't run those speeds. And since you're running about the max fsb on K7 possible..I don't see a real chance..

I have done a faster one :D

[Garrett]

Not even 43..... pfff ;) :thumbsup: just kidding: good job man

[SAE]

Originally posted by Garrett
Not even 43..... pfff ;) :thumbsup: just kidding: good job man

I definately will get 43.xx :D I guarantee ya! :thumbsup:

[Fewture]

Could someone please explain this? Look at the speeds and then the time..

http://www.fewture.cistron.nl/toofast.JPG

Now I ran this 3 times and all 3 runs gave a 46.XX. wtf? If I run it now it gives 47.XX (which is normal btw)

Edit:

Another one..

http://www.fewture.cistron.nl/toofast2.JPG

Just keep in mind I ran 47.45 on my previous DFI and that one was runnng 2912Mhz with 265MHz fsb..

[sierra_bound]

Here's my time

http://img.photobucket.com/albums/v38/ds7510/Pifast231X13tweaked3.jpg

[Garrett]

Previous record 51.58... making some progress today with the DFI Infinity...
http://home.planet.nl/~dikke332/5111.jpg

[SAE]

Originally posted by Garrett
Previous record 51.58... making some progress today with the DFI Infinity...
http://home.planet.nl/~dikke332/5111.jpg

Didn't I tell ya you will break that lousy record?!?!! :D :thumbsup:

[Electroid]

49.78s (http://www.kanetti.fi/~electroid/screenshotit/pifast/Dfi%20Ultra%20Infinity/hexpi_4978s.JPG)

AXP-M 2500+ @ 2779MHz (11*252) ~ 2.05V
DFI Ultra Infinity, Vcore, Vdimm, Vdd Nb & Sb
2*256MB BH5, 5-2-2-2-2-13-15
WinXP SP2
Water cooled cpu (18 - 20C)

Just testing... more coming soon (wcpuid shot: 2871MHz @ 2.15 - 2.2V) (http://www.kanetti.fi/~electroid/screenshotit/wcpuid/2871.JPG) ;)

[YoupY]

Originally posted by SAE
I have done a faster one :D

:toast:

WE WANT MORE...

WE WANT MORE .... :D


;)

[Learn]

old cpu, new mobo

1600+ agoia 41B 2.3v
21°c liquid
nf7s c1
22210 3.5v
http://membres.lycos.fr/ftpad/images/NF7S-C1/hexus%2067'69''.png

[SAE]

Originally posted by YoupY
:toast:

WE WANT MORE...

WE WANT MORE .... :D


;)

When I finish folding for this protein I will go for more... I promise ya I'll get a 43.xx :D

[eva2000]

Originally posted by sierra_bound
Here's my time

very nice

here's my latest offering

AMD64 3400+ Newcastle cooled with Thermaltake Venus12 heatsink/fan
Shuttle AN50R rev1.3 vdimm modded
Albatron MX480EL
1x 256MB KHX3200K2/512 BH-5 @264mhz 2-2-2-6 1T

http://fileshosts.com/AMD/boards/Shuttle/AN50R/3400_2/Kingston/KHX3200K2/2x256/13_14/LDT2/10x/264-264-2226-1T-1.7-3.6-1.6-1.5/pifast.jpg

[Fewture]

Ok, I'm right on track now.. Still dunno why the times where so superfast though. At one stage I got a 45.XX with under 3GHz proc speed.. real strange..

2600+ XPM @ 1.95V
DFI Infinity unmodded
Mushkin BH-5
crappy 360W PSU
M1 507 @ -40

http://www.fewture.cistron.nl/3044mhz_12x253_46.71.JPG

Next step is Vmods and a PSU so I can crank the fsb to 260+ and run my CPU at it's max (which is 3166 @ pifast).

[sierra_bound]

New personal best

http://img.photobucket.com/albums/v38/ds7510/hexus251X12.jpg

[CodeRed]

Originally posted by sierra_bound
New personal best



Damn, now I have to break out my backup score when I get home :D

Very nice BTW

:toast:

[sierra_bound]

Originally posted by CodeRed
Damn, now I have to break out my backup score when I get home :D

Very nice BTW

:toast:
Actually I have you to thank. I was using your tweaker.:D Timings weren't that great (3-3-2-8-11-16). Relied mostly on raw cpu power. ;)

[CodeRed]

Originally posted by sierra_bound
Actually I have you to thank. I was using your tweaker.:D Timings weren't that great (3-3-2-8-11-16). Relied mostly on raw cpu power. ;)

Id like to see that CPU with 2-7-12-2-2-5-2-2-1-1 timings :eek:
Easy sub-39 sec.

Here my backup score, but I noticed it was in vain (saw your sig, very nice :D )

http://users.tpg.com.au/spark69/an50r/pifast40.55.jpg

One day I'll get off my backside and install win2003-64 and go for that 40 sec barrier.

[ultron5]

Originally posted by SAE
When I finish folding for this protein I will go for more... I promise ya I'll get a 43.xx :D

OMFG!!! :slobber:


Keep it up!!!
This AXP System is NOT JUST AMAZING ... its like an old Ford Mustang ore something with a little tweaked engine or so LOL :toast: :D

[SAE]

Originally posted by ultron5
OMFG!!! :slobber:


Keep it up!!!
This AXP System is NOT JUST AMAZING ... its like an old Ford Mustang ore something with a little tweaked engine or so LOL :toast: :D

Thanks, my fellow German ;)

I will improve, but there's not much room left... 12x272 is not benching stable, as was 12x270 two weeks before ;)

May get some speed out of that old car :p:

[sierra_bound]

Originally posted by CodeRed
Id like to see that CPU with 2-7-12-2-2-5-2-2-1-1 timings :eek:
Easy sub-39 sec.

Here my backup score, but I noticed it was in vain (saw your sig, very nice :D
Thanks.:D Don't think I can run with those timings. But if I could do 255X12, I might have a shot at sub-40. Wish my RAM could run at 274.5 like yours.

[LardArse]

Thats a great score Sierra! :toast:

[sierra_bound]

Thanks LardArse. Still tweaking.

http://img.photobucket.com/albums/v38/ds7510/Pifast40.jpg

[kakaroto]

Nice score siera :D damn those FX-53 :toast:

I stuck at 3042MHz now with my Newcastle ... i miss 1024KB cache :D

Haven't used A64tweaker @2-7-12-2-2-5-2-2-1-1
This is still 3-12-2-2-5-3-2-3 :) try tommorow with the new settings, should be around 0.5Sec lower ..

http://www.xs4all.nl/~famchow/A64_3400/Pifast_3.04GHz.PNG

I need this benchable to beat Codered his A64 :D

http://www.xs4all.nl/~famchow/A64_3400/3.1GHz.PNG

[kakaroto]

holy s#$#t!! :slobber:

http://www.xs4all.nl/~famchow/A64_3400/Pifast_242x12.JPG

With A64 tweaker... without 44.45 YOU ROCK CODERED!! THNX :D

[CodeRed]

Originally posted by kakaroto
holy s#$#t!! :slobber:

With A64 tweaker... without 44.45 YOU ROCK CODERED!! THNX :D

Glad A64 Tweaker has helped :toast:

Did you just set the mem timings or did you also adjust the other "good" parameters

Max Async Latency = 6 ns (5ns is even better)
Read Preamble = 5 ns
Read Write Q Bypass = 16x
Bypass Max = 7x

[kakaroto]

Originally posted by CodeRed
Glad A64 Tweaker has helped :toast:

Did you just set the mem timings or did you also adjust the other "good" parameters

Max Async Latency = 6 ns (5ns is even better)
Read Preamble = 5 ns
Read Write Q Bypass = 16x
Bypass Max = 7x

Yup i saw the screenshot of the A64 tweaker topic.
Tryed 276x11 with your settings...damnz my mem craps out :mad:
I got series computing time: 33.17 and before 33.48..
Think around 41.22s..

have to make it stable, makes me the fastest newcastle and beated Lardarse P4EE :D :p:

[derbis]

New try with Barton....

[SAE]

Originally posted by derbis
New try with Barton....

Nice :thumbsup: ... but the timings kill ya :(

What a pity you cannot tighten them...

[kakaroto]

Small update! Tighten some timings!!

http://www.xs4all.nl/~famchow/A64_3400/Pifast_3.0GHz.JPG

[ojdr2001]

Need a link to download Pifast...thanks

[Learn]

http://pifast.hexus.net/pifast.php

[ojdr2001]

Thanks

[eva2000]

managed to shave a bit off my previous best time

AMD64 3400+ Newcastle with MCW6002/MCP650 cooled (http://www.fileshosts.com/watercooling/DIY/6002_MCP650/)
AN50R rev1.3
Albatron MX480EL
2x 256MB KHX3200K2/512 BH-5 @ 263mhz 2-2-2-6 1T at 3.61v

http://fileshosts.com/AMD/boards/Shuttle/AN50R/3400_2/6002_MCP650/Kingston/KHX3200K2/2x256/10_11/LDT2/10x/263-263-2226-1T-1.65-3.6-1.6-1.5_201/pifast_46-44.jpg

Just need more vcore to go higher heh

[SAE]

Finally broke the 44sec limit...

[Garrett]

:thumbsup: finally :toast:

[Zeus]

Damn nice SAE!!!
You're putting plenty of A64 systems to shame. :eek:

[RocKer]

Very nice score SAE you :rocker: .

I have notist that we have extact the same cpu i have also a xp-m-2600+ IQYHA 0352 RPMW;) ,no i dont have a prom,but in a few months(dec)am gone try it with dryice or with a mate of me his selfmade prom,i hope i can challeng you;).

Now with my beercooler a hit max at 2863mhz @ 2.0v 12.5/229,mem @ 2.9v 11-3-2 cl2,thats with 4°c water and no vmods yet,so as you can see my mem needs more vdimm,then a will sure hit more fsb,and a few vmods offcors

Mem at 11-2-2 cl2/2.9v hit max @ 12.5/216.


Sorry for my english.

[SAE]

Originally posted by RocKer
Very nice score SAE you :rocker: .

I have notist that we have extact the same cpu i have also a xp-m-2600+ IQYHA 0352 RPMW;) ,no i dont have a prom,but in a few months(dec)am gone try it with dryice or with a mate of me his selfmade prom,i hope i can challeng you;).

Now with my beercooler a hit max at 2863mhz @ 2.0v 12.5/229,mem @ 2.9v 11-3-2 cl2,thats with 4°c water and no vmods yet,so as you can see my mem needs more vdimm,then a will sure hit more fsb,and a few vmods offcors

Mem at 11-2-2 cl2/2.9v hit max @ 12.5/216.


Sorry for my english.

Yeah, cpu is a diamond :D (but the board got so much work units... it's no matter of course that boards do allow these kindsa vcores and ram clocks!)

Happy clocking :thumbsup:

[sierra_bound]

Finally got it under 40 secs.:D

http://img.photobucket.com/albums/v38/ds7510/Pifast39-98.jpg

[Fewture]

Chasing my m8 SAE ;)

http://www.fewture.cistron.nl/45.73_3044_264.JPG

Not quite fast enough yet, but then again, I'm not done yet :D

Specs:

2600+ M 51 MPMW
Infinity NF2 (china)
Twinmos BH-5
Prom M1 507.

Prom has to be refilled to cope with the load on 3166MHz (it's what the cpu can do on another board). Vcore has to be modded still. I have little trust in catching SAE, but I'll sure as hell try ;)

Number 2 on AXP for now

Nice to see XS back up again..

[Garrett]

I've got that 0351 MPMW too, NexXxoS HP Pro watercooled
2.0v 49.78 PiFast :)
http://home.planet.nl/~dikke332/4978.jpg

[dav]

Just triedd this hexus_pifast...

3500@2520MHz, 48.70 s

[Kunaak]

crappy dry ice run.
maybe get alittle better next dry ice run ;)

[Zeus]

"Crappy" Dry ice run, Kunaak? :eek:
Man, i really wonder what a good run will bring.

What does that 3700+ do with regular cooling?

[fxr91]

My FX53 and some Geil PC4000 @ 2.5-4-3-6 :slobber: Gimme some BH5 to have a play :banana:

[Electroid]

44.69s (http://www.kanetti.fi/~electroid/team_skootterit/LN2_25_26_9_2004/hexus_pifast_4469.JPG)

AXP-M 2500+ @ 3244MHz (13*249)
DFI Ultra Infinity
2*256MB BH5
LN2
WinXP SP2

[Kunaak]

"Crappy" Dry ice run, Kunaak? :eek:
Man, i really wonder what a good run will bring.

What does that 3700+ do with regular cooling?

2750 stable.
2800 unstable.

air cooled with a Zalman 7000 CU

[Fewture]

44.69s (http://www.kanetti.fi/~electroid/team_skootterit/LN2_25_26_9_2004/hexus_pifast_4469.JPG)

AXP-M 2500+ @ 3244MHz (13*249)
DFI Ultra Infinity
2*256MB BH5
LN2
WinXP SP2
Oh nice.. You stole my Nr2 spot! :stick: :D

Congrats!

My new score:
http://www.fewture.cistron.nl/45.25_11.5x269.JPG
DFI Ultra Infinity
2x 256MB BH-5
Prom 1 507
2600+ M MPMW51

Still room for more.

[CodeRed]

crappy dry ice run.
maybe get alittle better next dry ice run ;)

Wow, thats very very nice.

Can you do that with the 11x multi ... should be around 39.4 sec if your mem will take 282 MHz.

[Pedro Rocha]

This was just a test run :)

http://home.kqnet.pt/wo034892/pifast3598.jpg

35.98 Secs
AMD Athlon 64 FX-53 - 12,5x274,5=3.430Mhz
512 MB 549Mhz 2-5-2-2
Win 2000
Gigabyte 939
Cascade -100C

:toast:

[Tom Holck]

Nice Pedro,

That I can't beat with the SK8V

I'll change MOB to race you....

:toast:

[Pedro Rocha]

Nice Pedro,

That I can't beat with the SK8V

I'll change MOB to race you....

:toast:

opps ..sorry wrong button :rolleyes:


Thank you Tom :D

It is a pleasure to race you my friend, your are one of the nicest guys in the OC'rs community

:toast:

[PMM]

nice one Pedro Rocha :)

Just finalising the results and they will be up in 5 to mins from this post.

Oi Tom your in 3rd now ;) better pull your finger out :D

congratts to all, some nice score increases this month :)

[Tom Holck]

nice one Pedro Rocha :)

Just finalising the results and they will be up in 5 to mins from this post.

Oi Tom your in 3rd now ;) better pull your finger out :D

congratts to all, some nice score increases this month :)

Backupscore:

New record
35.51

Asus A8V mobo at 2.112 volt 270 x 13 = 3512 mhz :D
Cascade -120 C

[Tom Holck]

Dual cascade at -120 C and grafik -112 C ;)

Giga mobo is the best, but I need corevolt for my FX.
Its an old GForce4 grafik to handle the higt AGP. :rolleyes:

[Waus-mod]

I dont have a super pifast, but i just want to post it :D

Pifast: 53.59
Cpu: Amd mobile 2600+ MPMW 0352 (11.5x228)
motherboard: DFI lanparty NFII ultra b
mem: Corsair XMS3500 2x256 (XMS3502.v1.1 bh5)

screenshot:

http://img.photobucket.com/albums/v233/waussie/pifast-2629mhz.jpg

The highest fsb to get out of this mobile is 250x10 (255 will boot but after 1 minute he is frozen or reboots)

I have the problem that my mobile wont get any further than 2649mhz :( im cooling it with water!

[Pedro Rocha]

Backupscore:

New record
35.51

Asus A8V mobo at 2.112 volt 270 x 13 = 3512 mhz :D
Cascade -120 C

Congratulations Tom :toast:

If the cascade alows you can expect a reply in this weekend :D

Despite the 1.85v limit, I'm going to try it with the Gygabite mobo (full 3dmark benchable setup) since my FX-53 dont nedd to many voltage (3.600 was done with only at 1.9v idle)

The previous record was done with just 512MB RAM on the GB, this time I'm gonna try it with 1024MB RAM - I suspect that will help ;)

The race for 35sec begins ;)

[hipro5]

Backupscore:

New record
35.51

Asus A8V mobo at 2.112 volt 270 x 13 = 3512 mhz :D
Cascade -120 C


:D :toast:

[Tom Holck]

Congratulations Tom :toast:

If the cascade alows you can expect a reply in this weekend :D

Despite the 1.85v limit, I'm going to try it with the Gygabite mobo (full 3dmark benchable setup) since my FX-53 dont nedd to many voltage (3.600 was done with only at 1.9v idle)

The previous record was done with just 512MB RAM on the GB, this time I'm gonna try it with 1024MB RAM - I suspect that will help ;)

The race for 35sec begins ;)

Sorry to hear about the broken cascade, hope you get it running soon :toast:
Right My FX53/939 is an erly sample, need lots of volt. Your's is better to run on the Giga mobo.

[blinky]

tom howd u get 270 on the A8V?

u use high speed ram, or have super special BH5, or use a DDR booster?
or u used a mem divider?

[Tom Holck]

tom howd u get 270 on the A8V?

u use high speed ram, or have super special BH5, or use a DDR booster?
or u used a mem divider?

Booster, Rammod, PSU mod ;)

Ramvolt = 3.9 volt

The mobo has better performance than Giga, and better corevolt. but its a hell, poor stability at that speed.
But it was stabil in 35.5 sek :D

[PMM]

:D updated

If only I had a cascade to play with.......

I don't know why, considering we void our motherboards anyway in making a direct
off board supply, remove Power Mostfets and solder connections to a beefier off
board power source and do away with the power stability a 8 phase souce could
be very handy rather than 3/4/6 way per current designs on boards.

Something for someone to think about...

[yuri]

Tom how did you get past the overvolt protection on the asus ?

Please post pics if your able to also :)

[Tom Holck]

Tom how did you get past the overvolt protection on the asus ?

Please post pics if your able to also :)

:D
You alwais wants pictures yuri

I'll give you a clue:

http://www.xtremesystems.org/forums/showthread.php?p=508287#post508287

Sometimes when you give the MOB extra volt again and again, it migth die, og it might handle it for some time.

Here a picture of some of the asus board.(SK8V).I have more.
Btw A8V is a pain to work with.

[Fewture]

:D
You alwais wants pictures yuri

I'll give you a clue:

http://www.xtremesystems.org/forums/showthread.php?p=508287#post508287

Sometimes when you give the MOB extra volt again and again, it migth die, og it might handle it for some time.

Here a picture of some of the asus board.(SK8V).I have more.
Btw A8V is a pain to work with.
Whats it called?? The hard way? :D That is sick my man!

[cpulloverclock]

:D
You alwais wants pictures yuri

I'll give you a clue:

http://www.xtremesystems.org/forums/showthread.php?p=508287#post508287

Sometimes when you give the MOB extra volt again and again, it migth die, og it might handle it for some time.

Here a picture of some of the asus board.(SK8V).I have more.
Btw A8V is a pain to work with.What's the best frequency u get on a screenshot at 2.11-2.12v? 3.6GHz and more?

[yuri]

:D
You alwais wants pictures yuri

I'll give you a clue:

http://www.xtremesystems.org/forums/showthread.php?p=508287#post508287

Sometimes when you give the MOB extra volt again and again, it migth die, og it might handle it for some time.

Here a picture of some of the asus board.(SK8V).I have more.
Btw A8V is a pain to work with.

The A8v is the asus i was talking about, please let us know how you got past the overvolt protection with that board please sir, and pics of the A8V would be great :)

[Tom Holck]

The A8v is the asus i was talking about, please let us know how you got past the overvolt protection with that board please sir, and pics of the A8V would be great :)

I don't have a safe, tested OVP-mod for the A8V. If I had, I had posted in the mod sektion. But some of the resistance is the same on SK8N SK8V and A8V.
The card died the next day, but it was doing 2.112 for 5 hours.
I only needed 35.5 sek!
The mem is easy, mod give you 3.05 volt, then ram-booster op to 3.9-4.0 volt.

What's the best frequency u get on a screenshot at 2.11-2.12v? 3.6GHz and more?

I have not tested the max schreenshot. Been bussy doing 3DMark2001 :D
finaly got me a x800xt, its doing 600/620 default volt on air. Now it's voltmodded and mounted on the -112 C cascade. Testbench no oc was 35771 :banana:

[cpulloverclock]

I don't have a safe, tested OVP-mod for the A8V. If I had, I had posted in the mod sektion. But some of the resistance is the same on SK8N SK8V and A8V.
The card died the next day, but it was doing 2.112 for 5 hours.
I only needed 35.5 sek!
The mem is easy, mod give you 3.05 volt, then ram-booster op to 3.9-4.0 volt.



I have not tested the max schreenshot. Been bussy doing 3DMark2001 :D
finaly got me a x800xt, its doing 600/620 default volt on air. Now it's voltmodded and mounted on the -112 C cascade. Testbench no oc was 35771 :banana:
go to the 3700MHz :D

[yuri]

Tom how did you get 3.9v to ram on the a8v asus when ovp kicks in on the ddr over 3.05v?

I'm just having trouble understanding how your the only person I've seen past 3.05vdimm on a ASUS A8V. Even with a booster the motherboards OVP will hold memory voltage at or below 3.05vdimm.


And also where are you getting this vdimm number at, in the bios or in windows ?

[blinky]

I don't have a safe, tested OVP-mod for the A8V. If I had, I had posted in the mod sektion. But some of the resistance is the same on SK8N SK8V and A8V.
The card died the next day, but it was doing 2.112 for 5 hours.
I only needed 35.5 sek!
The mem is easy, mod give you 3.05 volt, then ram-booster op to 3.9-4.0 volt.



I have not tested the max schreenshot. Been bussy doing 3DMark2001 :D
finaly got me a x800xt, its doing 600/620 default volt on air. Now it's voltmodded and mounted on the -112 C cascade. Testbench no oc was 35771 :banana:
have you tried your insane setup with 3dmark05 yet?

:D

[Mauri Antero]

Seems like FX-52 rocks even with CH-5 memory, third run with my rig. Still trying to find optimal settings. Cooled with MachII r404


http://netti.nic.fi/~jhermune/3963.gif

[|RickY|]

this board is realy bad on v-core :S this cpu can do 3.5 easy on superpi on asus a8v becouse it goes nice to 1.95v, with gigabyte its hard to get better than 3.45 @ the best of 1.8v :S

on pifast the best for today is 3.4
http://ricky.home.sapo.pt/fx53/pifast3550.JPG

:)

[Mauri Antero]

Well got add this one too, some improvement with Kingston KHX3000 and GB K8NSXP-939 modded, cooled with Prometia machII r404 mod.

[Pedro Rocha]

Well, we are Numero Uno again (for 0.01sec) :D

We do a better score, but Win2K crashed at the easy part : save the screen capture :mad:

The comparison with our friend Tom is quite demonstrative of the importance of very low and well tweaked memory timmings (thanks CodeRed's A64 Tweaker ;) )

1 - Ricky & Pedro Rocha - 35.50sec - CPU@3.405 - 512 DDR@ 275 1,5-4-2-1
2 - Tom Holck - 35.51sec - 3.512 - CPU@3.512 - 1024@DDR 270 2-5-2-2

This means that better memory timmings are equivalent to more than 100Mhz in FX-53, which is quite amazing :slobber:

C'mon my friend Tom, turn on your -120ºC fantastic cascade, it is time to bench again :toast:

[CCC]

"#1 Tom H. was not running 270mhz fsb with 1gig at 2-2-5-2 on and "ASUS A8V" tom said he got 3.9v on the vdimm on this board kinda funny as OVP kicks in around 2.97v, knowone else in the world can get over 3.1v vdimm even tam+macci or other but TOM H. can -- HMM.."

"next and Ill only say this once 1gig is about 1s faster on pifast with same cpu clocks and same ddr timinggs within a 20mhz fsb meaning 3500mhz with 2x512, at 2-2-5-2 at 270mhz fsb will be slower than 3500mhz with 1gig at 250mhz fsb"

"this is a fact!!"

This is a quote from a friend of mine and i just thought yall would like to read it...

[Pedro Rocha]

"#1 Tom H. was not running 270mhz fsb with 1gig at 2-2-5-2 on and "ASUS A8V" tom said he got 3.9v on the vdimm on this board kinda funny as OVP kicks in around 2.97v, knowone else in the world can get over 3.1v vdimm even tam+macci or other but TOM H. can -- HMM.."

"next and Ill only say this once 1gig is about 1s faster on pifast with same cpu clocks and same ddr timinggs within a 20mhz fsb meaning 3500mhz with 2x512, at 2-2-5-2 at 270mhz fsb will be slower than 3500mhz with 1gig at 250mhz fsb"

"this is a fact!!"

This is a quote from a friend of mine and i just thought yall would like to read it...

:mad: :mad: :mad:

CCC, this is not fair and polite at all :mad:

see : http://pifast.hexus.net/pifast.php

I belive Tom Holck is very nice guy and a top class overclocker :)

Please do not write calumnious statements quoting anonymous "friends" of yours again <- First warning !

[CCC]

well first of all like i said i just thought yall would like to hear it.. I never said its my opinion... The forums are all about opinions and i just figured some people would wanna read it..

sorry :(

I also have an A8V and no matter what i do i cant get the ddr voltage over 3v or so.. It seems that noone can except Tom.. I just wish he would share the OVP mod with the rest of us ;)

[yuri]

LOL, thats what i was asking CCC, but i got brushed off also. :mad:

[aoc007]

cas 1.5 :slobber: nice work :)