View Full Version : Pifast Benchmark
Pages :
1
2
3
[
4]
5
6
7
8
hipro5
10-14-2003, 02:39 AM
Dark side for ever Dag............. :D
hipro5
10-16-2003, 12:02 AM
Thanks M8...........I think that with the FX51 and a modded Prommie you can do it.......... ;)
JCviggen
10-16-2003, 05:49 AM
Here's the number one spot for a phase changed AMD :D
http://users.pandora.be/JCviggen/pifast227.JPG
I also made a 41.6 but error in computation there...
super pi goes in 29 secs
http://users.pandora.be/JCviggen/superpi29.JPG
speed is a bit lower, it was 29s at higher speed as well.
Corsair 3200 reg at 228 2-6-3-2 dual channel on an SK8N, nVENTIV Mach II cooling of course
:)
ctgilles
10-16-2003, 06:17 AM
:slobber:
"JC, look behind you!"
*yoinks*
Bet I'd run fast with that rig on my back :D
That's some very nice speed with that FX setup. JC. :toast:
Now I'm definitrely lookin forward to the 939 pin variety.
Ragnarok
10-16-2003, 07:12 AM
well cant afford A64 right now, so I guess 244 2-2-2-11 with Interface on is the next best thing
http://members.iinet.net.au/~zzhang/5043.jpg
this pifast is some addictive §§§§
update:
http://members.iinet.net.au/~zzhang/4999.jpg
JCviggen
10-16-2003, 10:16 AM
talk about system speed :eek: http://service.futuremark.com/compare?2k1=7117467
142.5 FPS car hi, 171.6 lobby hi.... and still wayyy limited by gfx card.... 480/380 clocks... this rig would pull 28K with one of the big 3D guys cards.
JCviggen
10-16-2003, 10:28 AM
yeah you know my lobby high went from 168 to 172 just by going from 440/360 to 480/380 ... I reckon it will be 175+ qt those speeds... 440/360 gave me 24K exactly, 480/380 gives me 25.5K already...thats 1500 pts for a small increase in card
JCviggen
10-16-2003, 12:34 PM
heh ya know to get to 480 - with huge artifacts - I am already using 1,90 Vgpu and an MCW50-T 80W pelt, this card sucks
ctgilles
10-16-2003, 12:41 PM
JC, where are you atm? PM meh :) I'd send you my card if I can use the POS until mine gets back :)
macci
10-16-2003, 01:04 PM
I wonder if A64 single channel at 2.9GHz could beat that :D
I've ran my mobo up to 300FSB now SuperPi stable.. so 290x10 with RAM at 241 would be more than possible if the CPU just could do it ;)
and JC do the Vmem mod there FFS (use micro grabbers.. no one will ever know you did it..)!! :D
JCviggen
10-16-2003, 01:08 PM
Denmark, and although the idea of a good radeon is appealing, maybe better not ;)
:banana:
Anyway results up :)
ctgilles
10-16-2003, 01:14 PM
Yes, you already FUBAR'ed one of my cards :D
I don't forget ;)
Anyway, nice score mate :)
JCviggen
10-16-2003, 01:17 PM
Originally posted by macci
and JC do the Vmem mod there FFS (use micro grabbers.. no one will ever know you did it..)!! :D
Well i have some more mem volts now but the board doesnt really want to go any higher... well at 228 its the CPU that is on its end... the mem could go a tad higher still. But i guess if i could run multi 12 at this speed it could go sub 40 secs in this bench...but you cant have it all.... its already screemingly fast at 225 1:1 DC ,,, sandra gives me 6,8 GB/s buffered, and the lobby scores speak for themselves. 240-250 1:1 oh man,,,
I dont know if the 3200 A64 has the bandwidth needed to go fast in pifast... and the 5:4 divider isnt exactly as fast as the one on the Canterwood :(
JCviggen
10-16-2003, 01:51 PM
well your lobby hi is with huge card clocks... and from what ive seen lobby high even goes up quite a lot with increasing card clocks,
i think we might be getting a tad OT here though ;)
zakelwe
10-16-2003, 11:48 PM
Nice score on the pifast JC. :thumbsup:
Nice that you are now talking about the 40 second barrier. I am hoping to go under the 50 second barrier soon on aircooled, but we will see.
How things progress.
Nice game scores for car and lobby as well.
Regards
Andy
mkleingeld
10-18-2003, 08:29 AM
40 second barrier yea, but for me it's still the 50 second one I'm trying to reach :)
Scaved another tenth of my time.
A 52.33 score.
Done with 1.725v and just after the computer started up so with still a nice and cool compressor in the prommie, but with outside temps still around 20 degrees.
I'm slowly getting out of this thing what might be hidden.
Mem is at 440mhz 2.2.2.5 and all stuff in my sig is used.
tombman
10-20-2003, 03:09 PM
this is mine...
tombman
10-21-2003, 11:00 AM
Originally posted by MickeyMouse
TOMB> ownage there M8 :):):)
not really, actually pretty bad for an fx-51..
But my temps are bad, up to +5°C under full load.. default mach I is not strong enough :(
So it is only fully stable at 2750mhz :(
(tested many times with 100Million digits pifast41 ;))
But in games it kills the p4 ;)
In Gothic II on certain places i get with p4 @3900mhz under 20fps --> the fx-51 will give me 30fps ;)
Same in morrowind, p4 on some places 25fps, fx-51 wil give over 40fps ;)
So the Fx-51 is a real gaming cpu and wiill kill any p4 ;)
Just to illustrate a bit of good ol' socket A potency. It's a bit behind the FX's and others but what can ya do. :D
http://www.bigbutton.com.au/~lord/HPifastWcpu_232x13_3024-4871[1].jpg
Wow! amazing score, Lord! :toast:
Originally posted by MickeyMouse
LORD veryveryvery nice :) barton or tbred my man??
512Kb L2 cache must be a Barton.... ;)
It's a Barton, Jason. I'm still holding the torch for Socket A. :D
Also thanks for the encouragement guys. :)
I might be able to shave off a little more from the total time.
mkleingeld
10-21-2003, 02:29 PM
Wow! What specs are you using there?
What cooling?
This is the best score of a barton/xp by far I've ever seen!
CodeRed
10-21-2003, 03:42 PM
Originally posted by LORD
Just to illustrate a bit of good ol' socket A potency. It's a bit behind the FX's and others but what can ya do. :D
Nice going there buddy.
Keep that torch burning brightly :)
mkleingeld,
My trusty Abit nForce2 +OCZ 3500 with special Barton XP. Of course R404 Vapor phase cooled. :)
CodeRed,
Thanks buddy. I'll try and turn up the brightness or is that voltages a little more. Still have a fair bit to play with actually. :D
LORD:)
gabbax
10-22-2003, 01:38 AM
Do i dare to post my result here:rolleyes: 54 sec´s.....course not with my M2 just cooled with CircleFlow(Water) max is 3600+......Prommy will PiFast in 4040:D , just have to w8 to get it back from Denmark
Caprid
10-22-2003, 05:55 PM
Originally posted by LORD
I'm still holding the torch for Socket A. :D
And holding it quite high I see!!
Outstanding job, thats most impressive :toast:
Now that I have my board and CPU both running at the same time:rolleyes: I should have a socket 940 score soon....just need to shave of a few more 1/100ths.
Caprid
10-22-2003, 08:06 PM
Not quite there yet...but getting closer :D
http://caprid.homestead.com/files/pi42.36.jpg
FX-51
13X226
2947Mhz
Not quite there yet...but getting closer :D
Same here....:D
Nicely done btw :toast:
Originally posted by MickeyMouse
still my 2590mhz A64 is more impressive that that guys ;)
nice CAP no wait outstanding and LORD well you know your the sh*t I dont have to rub your head every time you bench at 3040mhz do I? hehe :)
Yep those new Athlons sure work fast. After having a look I saw that your results were pretty impressive Mickey M. So I'll give you a nice rub on your head as well....;) :D
When 939 pin finally gets released it should make for very interesting times. :p:
JCviggen
10-23-2003, 05:42 AM
i doubt we're going to see 260 DC... its like with the NF2 boards you know...how many did you see bench at 260 ??
I think we can be lucky to bench DC 240-245...but that should be fast enough at 2-5-2-2 ! You've seen my 3D scores at 225 DC but timings were 2-6-3-2, if you can run RAS to CAS at 2 thats going to fly especially at another 20 MHz extra... 200 FPS lobby high anyone??
faruquehabib
10-23-2003, 07:57 AM
wow, those scores are super old school!!!
Originally posted by MickeyMouse
LORD I just noticed you ahve always been following me ;) hehe J/K thought this was funny as its so old :)
BTW Im qwerty57 ;)
<SNIP>
What, you were Querty57!? No you couldn't be....... LOL J/K Jason. Actually, I knew you were. I remember about the time you changed your nic. :D
The screenie though, it's from another era as far as hardware goes. That 15.3K score was done on an 8K3A+v1.2 at a 220 fsb with Win XP and all the bloat services running. I remember because a format had been done and I just tested it out. I don't think I saved any of those old ones but I'll have a look. Because a short while later a score of 16947 had been done. ;)
BTW finally got the 3Dmark publishing probs solved with the Barton 3Ghz system.
Paul :D
zakelwe
10-23-2003, 01:41 PM
There is a AMD64 entry at position 15 at 2Ghz and 200FSB doing a 49.22 !
Jason, can you pifast at default 2Ghz and see what you get ???
This seems too high.
Regards
Andy
Ok folks
Currently in middle of an update...
But Just to mention the next update will not be until Tueday
next week.
**Fugger can you please post a screenshot m8y :)
thx
PMM
Fewture
10-23-2003, 03:00 PM
Improved my score:
http://www.fewture.cistron.nl/nf7-s2/untitled.JPG
Barton 2500+ 0324 TPLV "9"
Plain watercooling
KHX3500 CH-5 @ 3.18V @ 11-2-2-2
Vdd @ 1.85
3.3V @ 3.40V
Vcore @ 2.2V
Caprid
10-23-2003, 03:10 PM
Originally posted by zakelwe
There is a AMD64 entry at position 15 at 2Ghz and 200FSB doing a 49.22 !
That's way out of line :confused: It should be around 54.00-56.00. My FX-51 on air running @2450 - 223X11 goes about 49.50
What's up with that PMM???
Nice clock Fewture :cool:
Think that was one of the earlier results rec!!!
I'll strip it and look through my Email for the Database
submission.
Prob is lads at this early stage until I get lots of results from
the trusted ones I do not have a clear STD to compare against.
However if you trusted chaps could do some comparisons at
different clock speeds it would be a big help for validating
future A64 results :)
esp those below yourselves ;)
zakelwe
10-23-2003, 04:42 PM
Originally posted by PMM
Think that was one of the earlier results rec!!!
I'll strip it and look through my Email for the Database
submission.
Prob is lads at this early stage until I get lots of results from
the trusted ones I do not have a clear STD to compare against.
However if you trusted chaps could do some comparisons at
different clock speeds it would be a big help for validating
future A64 results :)
esp those below yourselves ;)
Yeah, the bogus ones will get weaseled out as we are too competitive to let dodgy ones not be questioned :)
This is me at the moment at 2300Mhz with an AMD64 3200
http://www.aocb77.dsl.pipex.com/screen.jpg
I'll put the details on hexus for you to fill in the details.
Regards
Andy
PS How is Bowman doing with youe AMD Jason ?
Originally posted by MickeyMouse
yum lets see 3040mhz 2k1 action :)
Sort of off topic but this one was done the other day.. Once going higher the Car bug seemed to rear it's ugly head.. Then to make up for it we'd have to find out how to do the nature 200fps bug..;)
Originally posted by MickeyMouse
you know BOWMAN he got the stuff wend mornig but he's a busy man and has to adapt a evap mont for the mobo so he said by the weekend sat/sun... I might also send a VIA K8V his way if the chaintech is too much mobo for him, hehe.. J/K benches soon IM sure.
He should do really well. If only there was a way to unlock the higher multi's on these A64's. I would have already had one. :)
Seeing as you found some old stuff from MO here's one for you. Does it jog the memory....
zakelwe
10-24-2003, 02:07 PM
Originally posted by MickeyMouse
you know BOWMAN he got the stuff wend mornig but he's a busy man and has to adapt a evap mont for the mobo so he said by the weekend sat/sun... I might also send a VIA K8V his way if the chaintech is too much mobo for him, hehe.. J/K benches soon IM sure.
LOL :) I'm sure he'll manage. Just blown the gentlemans class GF4 4400 score apart with this AMD. You know it's too easy when instead of sweating over watching it thjrough the tests you are in the kitchen doing the washing up ;)
It's not even that cold in England at present for us air cooled boys.
How did I doubt yours and quads words in the AMD64 Jason ? :)
Regards
Andy
Dagalidis
10-25-2003, 02:12 PM
Ok here is my updated Scores with AMD STOCK COOLING YET.....
FAST PI at 2410 MHZ
Dagalidis
10-25-2003, 02:14 PM
Also here is my new Super PI.......
I Cant wait to Watercool this baby with MY EXOS......
Still waiting the new Waterblock clip for A64 Socket.....
NoStra
10-26-2003, 03:17 AM
Here a pifast bench of my Duron1400 (l2 modded)
http://129.125.103.64/pifastduron.jpg
IamAnoobieCheez
10-26-2003, 09:53 AM
Originally posted by JCviggen
i doubt we're going to see 260 DC... its like with the NF2 boards you know...how many did you see bench at 260 ??
I think we can be lucky to bench DC 240-245...but that should be fast enough at 2-5-2-2 ! You've seen my 3D scores at 225 DC but timings were 2-6-3-2, if you can run RAS to CAS at 2 thats going to fly especially at another 20 MHz extra... 200 FPS lobby high anyone??
yep.. that's what I love.. tight timings at high FSBs. I used to do 230mhzFSB DC FastCPU decode, Ram timing at 5-2-2-2.0 for 3dmark and gaming. CorsairXMS3500, good sticks..
zakelwe
10-26-2003, 01:30 PM
Originally posted by MickeyMouse
the same way i million others did, lol.. I know I sold some serious A64 setups with the bragging I did over the many 100 forums on the net, lmao :)
:)
Just did a 51.42s pifast at 240x10 1:1 2-6-3-3 on air .. not bad at all, still some to go, just found out how to get past this 232Mhz Abit limit.
Regards
Andy
macci
10-26-2003, 10:40 PM
just found out how to get past this 232Mhz Abit limit
excellent news :)
can you use 1/7 divider now?
zakelwe
10-26-2003, 11:31 PM
Originally posted by macci
excellent news :)
can you use 1/7 divider now?
Macci,
I will try tonight. You menitoned clockgen shows the divisor, but when it ran it did not show this, just the cpu multiplier .. is there another version or am I misunderstanding you ?
Without having something to show the divider and because i am using an nvidia card which will do 100Mhz AGP the only way I will be able to tell is to see if the hard disk corrupts. It is a Western Digitial 8MB 7200rpm .. what sort of Mhz do these go to before having problems ? 40? 43 ? 46 ?
As I have just managed to get it stable at 240x10 I will try tonight to see how far the FSB will do at x8 multiplier and also with memory at 5:6.
I'll have OS CD to hand just in case it is a 6 dividier max and my files all disappear :)
Regards
Andy
FUGGER
10-26-2003, 11:39 PM
http://fugger.netfirms.com/pi5.jpg
4.352Ghz 272FSB 5:4 2522
bias_hjorth
10-27-2003, 03:37 AM
WOW fugger ..
4.352GHZ... This must be the fastest pc on earth :-D
anyway nice PI!
JCviggen
10-27-2003, 04:10 AM
Originally posted by bias_hjorth
4.352GHZ... This must be the fastest pc on earth :-D
he put 4.352 not 4,352 ... american notation you know
bias_hjorth
10-27-2003, 04:27 AM
ahh sry then...
zakelwe
10-28-2003, 03:46 AM
Originally posted by macci
excellent news :)
can you use 1/7 divider now?
Still can't seem to test this .. UGURU puts up the speed as much as you want perfectly until your cpu reaches it's limit at 10x but then changing multiplier with clockgen UGURU then allows the speed to be changed but CPU-Z shows the cpu is running at what it was before, so it is a catch 22 situation.
Nice 310FSB speed by the way, what board was that on ?
Regards
Andy
Fewture
10-29-2003, 06:42 AM
Took 0.38 sec off this week. Pretty happy with my time now :)
http://www.fewture.cistron.nl/pifast/53.42pifast.JPG
NF7-S
Barton 2500+ (0324 TPLV)
KHX3500 CH-5 (2x 256)
CWT 380W
Vdimm mod / 3.3V mod
Watercooled (custom Maze3, custom chipset block, blackice xtreme 2)
mkleingeld
10-29-2003, 01:03 PM
Ok, another one for Holland :)
Just installed my new 3.2c
Still testing and the Arctic Silver 5 still needs to settle but it's very promising so far.
a 49.22.
Finally broke the 50s barrier.
mem 209mhz 2.2.2.5 turbo
More to come...
erik9287nl
10-29-2003, 01:18 PM
From Holland too :D :
http://home.planet.nl/~verbe635/pifast6.png
AMD Athlon XP 1800+ @ 2620 MHz
Vdd modded Epox 8RDA+ (rev 1.1) @ 227 MHz fsb
2x 256 MB Twinmos/Winbond CH-5 @ 2-2-2-11 @ 2.9v
mkleingeld
10-30-2003, 08:55 AM
Sorry to bore you people, just have to post again an update :)
I'm getting more and more happy with this new cpu.
so far 4250mhz pifast stable with 1.75v. Mind you, run with a just started up prommie so nice and cool, which makes a difference of I guess some 6 degrees on cpu temp compared to after an hour or so running.
Just the fsb is higher, the rest same as before.
mem 5:4 2.2.2.5 GAT turbo
more to come....
bias_hjorth
10-30-2003, 10:00 AM
looking great... btw. very nice bike!
mkleingeld
10-30-2003, 10:33 AM
Thanx
I like my hobbies
Well, otherwise they wouldn't be hobbies I guess :)
mkleingeld
10-31-2003, 08:49 AM
Noone else posting here in this thead?
Ok, I'll do it then :)
As far as I know the fastest published pifast time for Holland.
See above for specs, just 1mhz more fsb and .025 more vcore although I doubt that made a difference.
Update done, soz for update delay me has lurgy :(
ALT-F13
11-03-2003, 10:00 AM
47.58
P4EE @ 4230 (302x14), 5:4 2-5-2-2, P4P800
Sorry no screenshot for now - pic is left on benching rig;) If somebody need a proof then i'll post it tomorrow.
FUGGER
Hmmm. I think that ~200 MHz have to give you more than 0.5 second... Strange... Maybe due to your lower FSB?
ALT-F13
11-03-2003, 10:05 AM
lol... Just checked - it is #10 in Hexus ranking... Maybe now i HAVE to upload that pic tomorrow:)
mkleingeld
11-03-2003, 10:14 AM
ALT-F13, you need a Canterwood mobo with that EE I think.
Because I think there is much more in that proc of yours. Either that or the extra cache doesn't make too much a difference in Pifast.
:( sorry lads not sure when next update will be
made a bit of a home goal, installing latest
Nforce drives on my shuttle (Developement machine)
the one I use for PIfast.
New drivers have borked it :( even safemode re-boots after
a few seconds :(
P.s ALT-F13 if you could post a screen shot it will save me
time Emailing you for one ;)
Fewture
11-04-2003, 04:59 AM
PMM:
I'm on the list, but no ranking..? Should be 42nd.. :rolleyes:
If it's the pifast version.. It is the same, only a different name of the bat file. We use it on another dutch pifast contest here: http://pifast.tweakers.net/ :)
It is the hexus bat, only renamed..
mkleingeld
11-04-2003, 05:43 AM
Hmmm, there goes my 2nd place now you revealed that :(
:)
BioBlade
11-04-2003, 11:16 AM
Originally posted by FUGGER
http://fugger.netfirms.com/pi5.jpg
4.352Ghz 272FSB 5:4 2522
with what kind or cpu and what kind or volt's ?
and what are your prommy r507 temps ?
Originally posted by Fewture
I'm on the list, but no ranking..? Should be 42nd.. :rolleyes:.. [/B]
LOL sorry flu induced c0[kup on the last upload I forgot to
regenerate the ranking numbers in the spreadsheet.
It will correct itself once I sort out my PC problem:(
Again sorry to all for the lack of updating, but I have only
1 machine with the MS-software on and its that one I
borked installing new NVidia drivers.
Business as normal
Updated :)
Was not drivers after all :banana: turned out to be faulty solder
joints on my ATI card for power connector, just happen to occur
same time as installing latest Nforce drivers spotted by chance
bit of soldering all good again thx god :toast:
mkleingeld
11-04-2003, 01:51 PM
PMM, glad it's ok again.
But no reason to say sorry. You are doing a great job and noone is paying for it so noone can give bad comments either :)
BioBlade
11-04-2003, 01:54 PM
here is my score untill know , still burning in my new stuff ...
49.39sec
http://home.hetnet.nl/~froepie/Pifast%201.JPG
4068mhz @ 1.65v
mushkin level2 pc3500 @ 3v
My ranking seems ok but my new time hasn't been updated.
My new time is 54.48 sec instead of 54.72 sec.
corrected another lurgy induced mistake from last week :(
Good new i'm better now :)
However if you spot any others let us know i'll correct them
quick sharpish.
BioBlade
11-05-2003, 01:20 PM
here is my updated score still burning in thath §§§§ everyday its going fast and faster....
49.19 sec
http://www.tutti-frutti.demon.nl/Pifast%202.JPG
Mikael
11-06-2003, 02:00 PM
I might as well post this one:
http://upl.mine.nu/uplfolders/upload1/pifast_59s.gif
zakelwe
11-07-2003, 05:00 PM
This may or may not be the top air cooled result, Caprid I think had one better on an air cooled FX51 but he did not post it as he was onto bigger and better things :)
Shame I did not get below 50s but still I am happy with this
http://www.aocb77.dsl.pipex.com/pifastnew.jpg
that's 1:1 at 256 with the memory and the memory was at 2-5-2-2 !!!!!!!! It only did 220 in my 875i at 2.85v ..good old Corsair XMS PC3500 ..beats Mushkin level 2 into a :banana::banana::banana::banana:ed hat...
Regards
Andy
macci
11-08-2003, 04:17 AM
The new BIOS for K8V seemed to improve performance a bit, so far I've got 45.95sec at 263x10 1:1 2-2-2-6 1T
macci
11-08-2003, 04:46 AM
Yea ldt only makes difference in dragos =)
btw this junk 9800xt cant take AGP bus speed at all?? Wont even post at 235FSB on K8V
jagare
11-12-2003, 05:49 AM
The highest I've been able to get 1M so far is 40s.
2.4c @ 3.42ghz
Liquid3D
11-12-2003, 03:25 PM
Originally posted by zteve
Hi everybody,
this is using 2400+@2400(201*12)
edit: change a new picture, with better result
This has noting to do with nothing but why did ths person take my P4 picture and place it here (page 2) (http://www.xtremesystems.org/forums/showthread.php?postid=43206#post43206) way back when?
Next issue, where do i find the Pifast benchie where the creen freezes so you can the snapshot?
ALT-F13
11-13-2003, 07:49 AM
http://alt.modlabs.net/pifast-4758.gif
Uploaded it at last... Hope Hexus will update me too...
JCviggen
11-14-2003, 05:26 AM
im on the move again...1.70V and not quite good CPU contact
zakelwe
11-14-2003, 05:57 AM
Ncie score JC, approaching half a second off your last score.
Have you topped 3Ghz yet at any point?
Regards
Andy
JCviggen
11-14-2003, 06:02 AM
i can run 3Dmark car test at 3010 but not a whole run...1.70V just isnt enough hehe..CPU temp in BIOS was +3C which is not quite right...on the SK8V it should be -5 under load at least. It reads 10C higher than the SK8N :rolleyes:
I had a 41.48 which completed just fine but froze after that at 3006 MHz
JCviggen
11-14-2003, 10:24 AM
http://users.pandora.be/JCviggen/pifast3009.JPG
Fewture
11-14-2003, 04:55 PM
Originally posted by JCviggen
http://users.pandora.be/JCviggen/pifast3009.JPG
Damn JC..dat zijn zieke Mhzen!!
Pure Athlon power there! :toast: Whoah :slobber:
charlie
11-15-2003, 01:23 AM
I need some tips on optimization for PiFast!!!!!!!!!!!!!!!
I should be doing better than this, right??
FUGGER
11-15-2003, 01:34 AM
Thats great charlie, might as well stop there. ;)
FUGGER
11-15-2003, 01:35 AM
You running dry ice again?
charlie
11-15-2003, 01:40 AM
Originally posted by FUGGER
You running dry ice again?
Yes, dry ice on the CPU and a new Baker18 R22 GPU rig....but 9800XT crashed and burned doing the green stripes and dots and dashes disease! SO I bench Pifast, lol
C
hipro5
11-15-2003, 05:13 AM
WAY TO GO JC............That's coooooolllll......... :D :toast:
hipro5
11-15-2003, 05:14 AM
charlie you're doing GOOD to M8.......Keep on.......... ;) :toast:
zakelwe
11-16-2003, 07:47 AM
Originally posted by charlie
I need some tips on optimization for PiFast!!!!!!!!!!!!!!!
I should be doing better than this, right??
When you run the pifast benchmark do you run at realtime priority or whatever it gives you ?
What happens of you run realtime ? You should knocks a couple of tenths off.
Regards
Andy
**** PIFAST ANNOUCEMENT ****
I ask this here before making my decision
I'm looking at taking a break from updating the PIfast
tables and I'm looking to see if anyone would be interested
in maintaining the PIFAST table?
When I started out it was Myself & M@TT for sometime now
it has been just me and i'm now at the stage where I'd like
to come home and not have to update the tables.
Plus I do not get the time to promote the Pifast Challenge as
I would like or even look into improving and converting over
to a more automated php system.
*The tables are just an MS-Excel file so you would need Excel
*Hexus supply the hosting for free as we use there Batch file as
the Standard settings for the PIfast Run as per how it was in the
days when Kain used to do the tables.
*You would Validate the submission prior to entry by making sure
it fits in the results allready received for the type of specs
supplied and to make sure the submission supplied is not created
with a newer version of PIfast I.e. 4.3 or incorrectly submitted
Series Computation time instead of Final Computation.
So anybody up for it?
JCviggen
11-21-2003, 12:24 AM
I can understand that PMM :)
I hope someone can take over, not too many takers yet so far i see :(
To cheer you up, im finally getting close to 40s
http://users.pandora.be/JCviggen/pifast3032.JPG
Can't see it being long now till that 40sec barrier
is defeated.
Keep pushing JC
I must get myself one of those A64s soon :slobber:
mkleingeld
11-21-2003, 08:53 AM
Wow JC!
I just broke the 48 second barrier myself and that allready made me happy :)
Tom Holck
11-22-2003, 07:51 AM
first run on my new FX51 on ASUS SK8V
2941 mhz Ram at 235 have to work on it:D
Nice results Boys. Still holding out for the 939 pin variants here. It's getting harder though.
Tom Holck
11-22-2003, 03:49 PM
Better:
2977 Mhz Ram 238 cas 2-3-5-2 :D
shortcircuit
11-23-2003, 02:58 AM
This is with my new A64 and a gigabyte k8nnxp.
Tom Holck
11-23-2003, 11:16 AM
still improving:
2983 Mhz ram 477 cas 2-3-6-2
thats nr 2.
Go on JC push :D
Update in 5mins....
[edit] ok update done :)
mkleingeld
11-23-2003, 01:05 PM
And scaved another few hundreds off :)
I need better cooling to get much more though.
Still not bad for a stock prommie mk1 I think.
mkleingeld
11-24-2003, 06:52 AM
Thanx, yea. I'm 2nd in the r9700pro catagory behind the 6 months old score of JC. But my vc is bottlenecking me big time.
mkleingeld
11-24-2003, 09:15 AM
Hmm when I edit my post I can't attach files so another entry of me.
Again a bit faster :)
Gamer
11-24-2003, 11:26 AM
personal best :
http://users.pandora.be/gamer/PIV3/49.56.JPG
shortcircuit
11-24-2003, 03:42 PM
I knocked almost a second off my time using my old "dead' A64 which clocks 100mhz+ higher.
bias_hjorth
11-24-2003, 03:45 PM
dang those A64 and FX´ are fast in PiFast.. Beats the living **** out of the P4´s
JCviggen
11-25-2003, 07:42 AM
better increase the buffer a bit between Tom and myself..had to change multi and use slower mem :( I hate unmodded boards...
cpulloverclock
11-25-2003, 11:21 AM
Opp would have to try pifast with his FX-51@3100MHz = 40s
I know, he doesnt like pifast, just like 3dmark... :( :p: :banana:
congrats JC !!!!!!!:slobber:
shortcircuit
11-25-2003, 11:33 AM
Finally broke into the 45's...
Caprid
11-25-2003, 07:33 PM
Tightened up the timings and got a little more clock on 'er :)
http://caprid.homestead.com/files/pi41.91.jpg
macci
11-27-2003, 12:46 AM
Some A64 action:
http://www.solidhardware.com/macci/a64/hex_3015_4242.gif
Vcore 1.95V, evap -90C
Very nice Macci. :toast:
So it takes this sort of temp to pull those numbers with the A64. I've got to find me one of those cryo-freezers. Good point to start with hopefully.
JCviggen
11-27-2003, 01:19 AM
amazing...now get running some 3Dmark slacker!! ;) I want to see the lobby scores at 300+ :eek:
I managed a 40.1s with error in computation, this was the next best thing..also broke 3100 MHz for super pi, and highest screenie is above 3200 :)
http://users.pandora.be/JCviggen/pifast3080.JPG
http://users.pandora.be/JCviggen/superpi27.JPG
macci
11-27-2003, 01:25 AM
Man that's second fastest SuperPi 1M in the world! :toast:
Top stuff JC :)
QuadDamage
11-27-2003, 03:58 AM
you guys are mad:D holy crap, i thought you're on Duron chip macci! what are you waiting for, bench 3D! :) dang, your cooling is just too friggin amazing if you ask me:)
zakelwe
11-27-2003, 03:58 AM
Very good benching by everyone, 40 seconds soon to be broken ?
It's a shame Superpi does not do tenths to give more granularity, but 27s is very very good :D
Is there a 26 then ? Was it a 5Ghz Japan score with Ln2 ( my guess, not been keeping up with it ).
Regards
Andy
QuadDamage
11-27-2003, 04:12 AM
26s run belongs to one of the Japanese tweakers with an FX-51 at just over 3.3Ghz. Can't remember if that was done by Mr. New Beetle or someone else though.
Hallowed
11-27-2003, 04:14 AM
This is too much. :)
Awesome to watch though. A neverending race.
JCviggen
11-27-2003, 04:36 AM
Originally posted by MickeyMouse
JC damm dont you ever quit wiht that fx51? ;) everytime I see ya getting those clocks higher and higher you making the phare "HITTING A WALL" less and less true eevryday..
She just needs some love :D ;)
QuadDamage
11-27-2003, 08:46 AM
like everything does:D
time to get a video card JC, 30K would fall sooner or later:)
hipro5
11-28-2003, 04:31 PM
Still fighting with my "old" P4 3.2GHz ES with 335MHz fsb , 3:2 CPU:Ram and x13 multi........ :)
Tom Holck
11-28-2003, 05:10 PM
Originally posted by hipro5
Still fighting with my "old" P4 3.2GHz ES with 335MHz fsb , 3:2 CPU:Ram and x13 multi........ :)
Nice to se you are still fighting;)
Follow this tread in the next week, and se what happend:D
You will now:toast:
Kunaak
11-28-2003, 05:21 PM
uh oh-looks like the hulks about to do some damage ;)
hipro5
11-28-2003, 05:36 PM
Originally posted by Tom Holck
Nice to se you are still fighting;)
Follow this tread in the next week, and se what happend:D
You will now:toast:
He,he,he......I'll be around here my friend.......I'm glad you're doing GOOD............ ;) :toast:
Nikita
11-30-2003, 05:35 AM
Personal best:
Barton 2500@11.5x230
NF7-S v2.0
Bit slow when compared to the 50 and under boy's :(
http://www.hpautoelectrics.com/OverClocker73/Barton%202500/11.5x230%20pifast.jpg
Tom Holck
12-06-2003, 06:29 AM
Pifast at 39.64:D
Yes its the right version.
3241 Mhz mem 480 at 2-5-2-2
Can you beat that JC?
Tom Holck
12-06-2003, 06:29 AM
Notice the Corevolt:slobber:
Tom Holck
12-06-2003, 06:31 AM
77 Kg
bias_hjorth
12-06-2003, 06:42 AM
Is that not the WR?
macci
12-06-2003, 06:43 AM
Outstanding speeds there Tom! :toast:
tried SuperPi 1M yet? might get close to world record!
:slobber: That is a nice time and one very nice lookin' rig! :up:
Tom Holck
12-06-2003, 07:16 AM
Originally posted by macci
Outstanding speeds there Tom! :toast:
tried SuperPi 1M yet? might get close to world record!
Have some trouble with the volt on SK8V its not stable, fligger past 2.03-2.11 I will like to have 2.05-2.15 stable
JCviggen
12-06-2003, 07:37 AM
Originally posted by Tom Holck
Can you beat that JC?
nope i cant... its like trying to beat a prom with a heatsink :(
Although my best is 40.30, that is only 0.6s slower but with 200 MHz less CPU and a lot slower mem too. You shouls score better than that...
macci
12-06-2003, 07:41 AM
Maybe it requires a droop voltage mod.. ;)
Caprid
12-06-2003, 08:04 AM
WOW!!
Very impressive indeed :toast:
Learn
12-06-2003, 10:45 AM
incredible cpu mhz clock Tom Holck ! :eek: :D
hipro5
12-07-2003, 02:01 AM
You little devil............You DID IT at last...........I knew you could make it Tom.......This is on me my friend........ :toast: :toast: :toast: :D :banana:
Soltani
12-07-2003, 08:49 AM
Very Nice Tom Holck! :toast::slobber:
petervandamned
12-07-2003, 10:05 AM
impressive man :)
what will happen when the 939 comes out :)
Epsilon
12-07-2003, 10:12 AM
Incredible :)
Syzzer
12-07-2003, 11:17 AM
Damn, that's fast :slobber:
I'm curious what it does when you fix that Vcore :D
Edit:
While I'm here anyway I'll post my bench too:
http://home.tiscali.nl/syzwarez/pifast_55.02_crop_t.jpg
55.02 sec (http://home.tiscali.nl/syzwarez/pifast_55.02_crop.jpg)
Specs:
Abit NF7-S rev. 2.0 fully modded
AMD AthlonXP 2500+ @ 243 * 10,5 @ 2.1V
2*256MB Infineon PC2700 USA @ 487 MHz 11-2-2-2 @ 3.2V
CPU Interface off :(
Tom Holck
12-07-2003, 12:38 PM
Originally posted by petervandamned
impressive man :)
what will happen when the 939 comes out :)
I'll tell you:cool:
I just change the Mob and CPU.
Turn on the cooling, and we have a new record about 35 sek later
:slobber: :D
Tom Holck
12-07-2003, 12:43 PM
Originally posted by MickeyMouse
Hipro now are you finaly going to jump on the AMD bandwagon ;)
I think hipro with his ES3.2 and an extra mem-tweak can do it on this rig. Here IC7-G v 1.0
The FSB on 296 is limiting the OC:rolleyes:
Fewture
12-07-2003, 04:25 PM
Originally posted by Tom Holck
Pifast at 39.64:D
Yes its the right version.
3241 Mhz mem 480 at 2-5-2-2
Can you beat that JC?
He's using a normal prommy.. But I think he can beat the score with your setup ;) (joke)
Iridium192_217
12-07-2003, 04:26 PM
I think his prommy is modded fewture
JCviggen
12-07-2003, 11:40 PM
Originally posted by Iridium192_217
I think his prommy is modded fewture
still theres a difference between -40C and -100C dont you think lol
hipro5
12-07-2003, 11:50 PM
Originally posted by MickeyMouse
Hipro now are you finaly going to jump on the AMD bandwagon ;)
Nooooopppp..........I'll "stay" with INTEL........... :D
My Prommie is a Modded R507 one with some "extras".........I'll use it for a VGA card SOOOONNNN...........I'm now building an R410 freezer with a 1hp compressor and a CPU "head" of silver designed by myself.........We'll see......... ;) :D
BioBlade
12-09-2003, 10:48 AM
Originally posted by Tom Holck
I think hipro with his ES3.2 and an extra mem-tweak can do it on this rig. Here IC7-G v 1.0
The FSB on 296 is limiting the OC:rolleyes:
what kind a cooling did you used for that because my 3.2 is maxed out @ 4430mhz:slobber:
macci
12-09-2003, 12:42 PM
I guess he used the same -100C cascade that got his FX to +3.2G ;)
Fewture
12-09-2003, 01:12 PM
Originally posted by Iridium192_217
I think his prommy is modded fewture
Modded or not..thats only a small difference. Nevertheless, both scores are insane imo :D Great work from both.
BioBlade
12-10-2003, 01:03 PM
here is my new pifast score with my new 3.2 :P
45.56 seconds @ 4430Mhz :cool:
@ -57stressed prommy r507
http://home.hetnet.nl/~froepie/Pifast%20@%204430mhz%20!!!!b.jpg
is post a link because the picture is 1600x1200
Very nice job Tom. :slobber: :toast:
Tom Holck
12-11-2003, 05:37 AM
Originally posted by DEEF
Very nice job Tom. :slobber: :toast:
Thanks:toast:
Originally posted by macci
I guess he used the same -100C cascade that got his FX to +3.2G ;)
Right,
Fun to see, that my best before (bench 4354 mhz) was
not the best at all, now it can bench at 4460-4570 Mhz:D
BioBlade
12-11-2003, 11:28 AM
this is my max oc now 4470mhz @ 1.85v @ -58 r507
45.33sec
http://home.hetnet.nl/~froepie/New%20Pifast%204470Mhz.jpg
thats the max of my cpu 3.2 :P i am glad with it
Nikita
12-11-2003, 10:20 PM
Way to go Tom :toast:
I did bit better my self, but not as good as I thought going from 230fsb to 250fsb :(
Looks like clock speed affects more than fsb :rolleyes:
http://www.hpautoelectrics.com/OverClocker73/Barton%202500/10.5x250%20pifast.jpg
Tom Holck
12-12-2003, 05:23 AM
Originally posted by Nikita
[B]Way to go Tom :toast:
I did bit better my self, but not as good as I thought going from 230fsb to 250fsb :(
Looks like clock speed affects more than fsb :rolleyes:
I notice that too. Nice memspeed Btw:toast:
Nikita
12-12-2003, 02:32 PM
Originally posted by Tom Holck
I notice that too. Nice memspeed Btw:toast:
Not bad for 2*Kingston ValueRam PC3200 (BH-5) :)
http://www.adventurevision.com/somepictures/PiFast-49.91s.gif
A64 3200+ running 10x250@1.7v under a Swiftech MCW5000-64(and some "winter-cooled" water). :)
http://www.adventurevision.com/somepictures/A64/PiFast-48.98s.gif
Increased memory to 277(DDR554). ;)
hipro5
12-15-2003, 03:09 AM
He,he..........Here's my new one........Made with 3:2 CPU Ram.......Not bad....... :D
JCviggen
12-15-2003, 03:13 AM
holy front side bus speed batman! ;)
hipro5
12-15-2003, 03:24 AM
Yeap.......I WISH I had an EE ES chip right now.......... :D
Tom Holck
12-15-2003, 04:10 AM
Originally posted by hipro5
Yeap.......I WISH I had an EE ES chip right now.......... :D
Just tried to compair your score to more ordinary bus speed.
Here you se an P4@4476 standard cas 2-5-2-2
You gain over 100 Mhz CPU speed by raise that FSB. :toast:
hipro5
12-15-2003, 04:23 AM
Originally posted by Tom Holck
Just tried to compair your score to more ordinary bus speed.
Here you se an P4@4476 standard cas 2-5-2-2
You gain over 100 Mhz CPU speed by raise that FSB. :toast:
Yes you're right Tom........BUT on 3DMark is a LOT better.......I wish(again) I had a good VGA........ ;)
hipro5
12-17-2003, 01:09 AM
Originally posted by MickeyMouse
holy sh*t HIP!!!!!! why does your fsb state 360+ ?? that must be a bug ;)
nice stuff my man as always :)
Thanks M8...........I'm trying..... ;)
http://www.adventurevision.com/somepictures/A64/PiFast-48.64s.gif
Increased memory to 297(DDR594) with sloppy timings just for fun. ;) Wish I could get more than 2.5GHz out of her. :D
zakelwe
12-19-2003, 09:04 AM
Originally posted by Jeff
http://www.adventurevision.com/somepictures/A64/PiFast-48.64s.gif
Increased memory to 297(DDR594) with sloppy timings just for fun. ;) Wish I could get more than 2.5GHz out of her. :D
Nice work Jeff. you used to beat me with the AthlonXp's and now you are beating me with the Athlon64's ?!
How is your 9500 going with the Athlon64? Or are you still concentrating on non 3d benching ?
Regards
Andy
Non-3DMark really. I have a 9500np(inline memory) that I play a few games with but for the most part, I still just run these "number" benchmarks.
Don't know how people are getting cas 2(or even cas 2.5) to work with these chips 'cause I'm stuck with cas 3. I've tried four different sticks of memory and can't get a good boot.
Happy Holidays! :toast:
Kunaak
12-20-2003, 04:27 PM
my little try at some Pifast work :D
HungryForHertz
12-20-2003, 04:40 PM
I wish I wasn't such a failure at life...
Series computing time : 104.80
Division time : 11.86
InvSqrt time : 8.02
Final huge multiplication time : 5.66
------------------------------------------------------
Total computation time : 131.33 seconds(~ 0.04 hours)
Writing informations into file pi.txt
The computation seems OK
Appending result to file pi.txt ...
Jot down your results or take a screenshot :)
Press any key to continue . . .
Caprid
12-20-2003, 05:27 PM
Shaved a half a second off :)
http://caprid.homestead.com/files/pi41.77.jpg
FUGGER
12-20-2003, 05:57 PM
Nice Caprid.
Can I get pifast for OS X? I can compile
pi_CSS5 on 2Ghz G5 can do pi to the millionth place in 12 seconds
Playing with 1.85v on the A64 3200+...
http://www.adventurevision.com/somepictures/A64/PiFast-47.84s.gif
(287x9 1:1 carp timings)
Caprid
12-20-2003, 06:57 PM
Nice one Jeff :toast:
Can see I'm not the only one enjoying the nice cool evening in the NE tonight :D
Originally posted by Caprid
Nice one Jeff :toast:
Can see I'm not the only one enjoying the nice cool evening in the NE tonight :D
Thanks. :toast: And yepper... the radiator is outside and a dryer duct is hanging out the window. :D
Pretty funny when you run out of FSB and have to raise your multiplier back up a 1/2 notch. Never thought I'd see 300MHz but this OCZ PC4000 Gold Edition (http://www.newegg.com/app/ViewProductDesc.asp?description=20-146-931&catalog=147&manufactory=BROWSE&depa=1) didn't even swet it with 2.8v(granted that's at cas3 and the ram is just about frozen but I'm still impressed).
Now if I could just grow a set and mount the cpu block without the IHS. :rolleyes: It's actually already "removed" but I just can't get myself to take the chance... yet. :devil:
You've got that right. ;) I really wanted to try and pass you 'cause you have the Prometeia and all I have is water... albeit cold water.
I'm sure you've got some left and I really don't think I'm going to break 47s... if I do, it'll be by a hair so I think your safe. :bows: ;)
zakelwe
12-21-2003, 02:27 AM
Originally posted by Jeff
You've got that right. ;) I really wanted to try and pass you 'cause you have the Prometeia and all I have is water... albeit cold water.
Technically speaking would that not be better termed "liquid ice " :D
I bet it's around the -20C mark or less :)
Jeff, I run a stick of Corsair XMS 3500 C2 at 256Mhz 2-5-2-2, but I am not sure how much further it will go until I move away from this Via board to nforce3 ( Gigabyte ) which is sitting in the corner.
Regards
Andy
Hi guys, first entry for me. Finally got my board running nice, as it should ;)
Can't really compete with the AFX/Prom scores, but what the hell...
Old week 10 ( :( ) Barton 2800+
Asus A7N8X Vdd/Vddr mod
2x 256MB Winbond BH-5
http://members.home.nl/dj.boeren/oc/pi242-10.png
StormPC
12-21-2003, 02:54 PM
WoooooHooooo! #24 on Hexus PiFast Challenge overall and #1 aircooled. Didn't I read in CPU magazine that the FX would only overclock 150MHz or so? LOL...I must have gotten an FX-53 by mistake!:D
SmokeyTheBandit
12-27-2003, 03:56 PM
Well thougt it share this with you :)
Nr. 10 overall :D
http://home.quicknet.nl/qn/prive/pjm.honselaar/Pifast/pifast45.94.JPG
Nice goin' Smokey! :toast:
SmokeyTheBandit
12-28-2003, 12:25 AM
Thx guys :toast:
The difference between the 512/1mb is 1.5 seconds in pifast fewture said 2 me so mickey it is just the way it should be ;) :)
Hopefully some better scores 2 day :D :banana:
HO HO Ho
Hope you all had a Merry Xmas - sorry for the lack of
updates decided to have a nice rest without worrying
about anything :D
Updated now though :D
Have a good 2004 folks :)
Happy New Years to you too Paul, and keep up the great work over at the PiFast page! :toast:
macci
12-28-2003, 10:16 AM
it only took me 2600mhz on the 1meg cache 3200+ to match that and that also was only at 260 1:! no super fsb's
Yea 260x10 1:1 indeed (and you were 1sec slower!), smokey's RAM is at 233MHz only. So he could hit the same result at lower CPU MHz if he used higher RAM speed. So the difference between 512k and 1MB versions seems to be VERY little as far as PiFast goes.
Smokey did you try with 9x multi and higher FSB and RAM speed yet?
SmokeyTheBandit
12-28-2003, 01:19 PM
Originally posted by macci
Yea 260x10 1:1 indeed (and you were 1sec slower!), smokey's RAM is at 233MHz only. So he could hit the same result at lower CPU MHz if he used higher RAM speed. So the difference between 512k and 1MB versions seems to be VERY little as far as PiFast goes.
Smokey did you try with 9x multi and higher FSB and RAM speed yet?
Nope but will do ;)
Let you guys know what the results where :D :)
hipro5
12-29-2003, 04:55 AM
My newer bench at 1:1 CPU:RAM and 269MHz fsb with Ram at Cas 2-5-2-2........ :D
Marquzz
12-30-2003, 05:43 AM
This is with A64 3200+ @ 2700, ram @ 1:1 2-2-5-2, AN50R.
http://www.techsweden.org/bilder/marquzz_pifast.png
Chriviper
12-30-2003, 05:52 AM
Now if i have this right the P4 runnin at 4G+ has same times as A64 at 2.7G's???wow..talk about bang for you Mhz!!!
hipro5
01-03-2004, 05:51 AM
I wonder why I can't upload my new bench???.......... :(
QuadDamage
01-03-2004, 08:12 AM
does 40.66s look any good? too bad i've lost that screenie. took me FX-51 at 3037mhz to do that.
JacobHansen
01-03-2004, 08:43 AM
Why haven´t you posted your result?
Originally posted by hipro5
I wonder why I can't upload my new bench???.......... :(
I was going to say its because I've not updated the tables yet
since I last did on the 28th Dec'03
But your not in the database :confused:
Think I have enough info from the above to make the change.:)
hipro5
01-05-2004, 01:38 AM
Thanks for the update..........but you wrote down wrong time........Anyways I just submited my resaults.......Thank you and happy new year...... :toast:
Tom Holck
01-05-2004, 08:18 AM
Originally posted by hipro5
My newer bench at 1:1 CPU:RAM and 269MHz fsb with Ram at Cas 2-5-2-2........ :D
very impressive Hipro5, you are still tweaking that poor Ram:toast:
Done some ram-tweak myself.
New WR: 39.53
and the corevolt is stabil at 2.096 volt. I can make that results 15 times in 10 minutes..:D
bias_hjorth
01-05-2004, 09:15 AM
looking good tom. The cascade rig really does pack out some punches!
Tom Holck
01-06-2004, 01:28 AM
still some improvement left there
:banana:
Pejsen
01-06-2004, 01:43 AM
:banana::worship:
Tom Holck
01-06-2004, 04:23 AM
Had 39.39error at 3202 think the ram need more volt to pass 250:cool:
But still improving:
39.44
:slobber: :banana:
cpulloverclock
01-06-2004, 05:08 AM
Originally posted by Tom Holck
Had 39.39error at 3202 think the ram need more volt to pass 250:cool:
But still improving:
39.44
:slobber: :banana: wowwwwww
impressive
:eek:
cpulloverclock
01-06-2004, 05:14 AM
Originally posted by Tom Holck
Had 39.39error at 3202 think the ram need more volt to pass 250:cool:
But still improving:
39.44
:slobber: :banana:
I have a job for u
try a
- 1M digits of PI and u'll get a 26s like Hideo
http://www012.upp.so-net.ne.jp/ohij2/2350-26.gif
- 8M digits (05'04 to beat) http://www.geocities.co.jp/SiliconV...fx/504-3199.gif
- cpumark (376 to beat)
http://www.coolaler.com/~coolale/3010_32mtop.gif
many challenges
Well done to all that have improved :toast:
Update done :)
Caprid
01-06-2004, 04:04 PM
Most impresive Tom.. :banana:
Hipro, When you getting a P4EE?? Those are the best clocks yet!!
Rock on d00d! :toast:
Originally posted by Tom Holck
Had 39.39error at 3202 think the ram need more volt to pass 250:cool:
But still improving:
39.44
:slobber: :banana:
nice cpu speed and bench
:D
BTW this is the 1000 reply to this thread:eek:
hipro5
01-07-2004, 06:26 AM
Originally posted by Caprid
Most impresive Tom.. :banana:
Hipro, When you getting a P4EE?? Those are the best clocks yet!!
Rock on d00d! :toast:
WAY TO GO TOM........Keep on my friend....... :toast:
Caprid thanks........I'm just waiting for the 3.4 ES EE to "hit" my country to get one........I hope soon......Nice work you do there too M8..... ;)
Tom Holck
01-07-2004, 08:44 AM
Originally posted by cpulloverclock
I have a job for u
try a
- 1M digits of PI and u'll get a 26s like Hideo
http://www012.upp.so-net.ne.jp/ohij2/2350-26.gif
- 8M digits (05'04 to beat) http://www.geocities.co.jp/SiliconV...fx/504-3199.gif
- cpumark (376 to beat)
http://www.coolaler.com/~coolale/3010_32mtop.gif
many challenges
Here you are, cpulloverclock
1. work done: Cpumark 406 at 3195, havent tried higher, done 400 at bootingspeed 3152
The M1 SuperPi test I now, "only" 27 sek, but VERY close to 26..
Tom Holck
01-07-2004, 09:40 AM
Its 5.05 at 3120 to 3176 mhz
then its 5.04 from 3182-3189-3195 -??
Nice marks Tom!!! :toast:
cpulloverclock
01-07-2004, 01:05 PM
WOWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
very good and Awesomeeeeeeeeeeee Tom
406 is the WR and for SuperPi the same time
YOU ARE THE BEST
:toast: :eek: :eek: :eek: :eek: :banana: :banana: :slobber: :slobber: :slobber:
U can send ur 8M here : yok@mx.biwa.ne.jp
the link http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
http://www.geocities.co.jp/SiliconValley/5883/result/fx/504-3199.gif
cpulloverclock
01-07-2004, 01:06 PM
Great job MM but soon 3GHz?
bias_hjorth
01-08-2004, 08:17 AM
HOLY §§§§ -
Damn that CPU rocks.. And one more for the AMD :-)
Very nice MM
bias_hjorth
01-08-2004, 10:37 AM
Maybe the Gigabyte k8nnxp with the enhanced power supply?
Tom Holck
01-09-2004, 02:21 AM
Originally posted by MickeyMouse
looking right now around for a retiler that has an NF3 A64 mobo :) diing to know if i can hit 3ghz+ and sub 42s in pifats and I want that damm 30s-29s superpi 1m soooo baddd
Nice MM,
Can't you push the timings a little:toast:
hipro5
01-09-2004, 04:47 AM
Good work there MM............I told you to keep on M8 and don't get dissapointed......... ;) :toast:
Troll
01-09-2004, 04:50 AM
Hi all
Interesting article concerning the question of timings (2-2-2-11):
http://www.madshrimps.be/?action=getarticle&articID=133
my shuttle AN50R only allows 1.7V Vcore... so im restricted to 2360MHz with Zalman 7000A-Cu, even with LDT-Speed set to 2.5 or 2 (boots into Windows with 2500, but reboots immediately) - have to mod... :rolleyes:
Tom Holck
01-10-2004, 05:12 AM
Originally posted by Troll
Hi all
Interesting article concerning the question of timings (2-2-2-11):
http://www.madshrimps.be/?action=getarticle&articID=133
my shuttle AN50R only allows 1.7V Vcore... so im restricted to 2360MHz with Zalman 7000A-Cu, even with LDT-Speed set to 2.5 or 2 (boots into Windows with 2500, but reboots immediately) - have to mod... :rolleyes:
Welkome to Extreme Troll
Yes give a little more volt, then you might see 2500:toast:
Tom Holck
01-10-2004, 07:35 AM
Originally posted by cpulloverclock
[B]WOWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
very good and Awesomeeeeeeeeeeee Tom
406 is the WR and for SuperPi the same time
YOU ARE THE BEST
:toast: :eek: :eek: :eek: :eek: :banana: :banana: :slobber: :slobber: :slobber:
U can send ur 8M here : yok@mx.biwa.ne.jp
the link http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
Tweaked XP a little:
Now 5:03
:banana:
well 42.38 is my best so far, the cpu will go higher but the ram needs more voltage to run higher than 265mhz 1:1... Im already putting 3.44v in it so im not sure if im going to try more or not..
QuadDamage
01-10-2004, 04:23 PM
thought i would contribute to this thread:)
QuadDamage
01-10-2004, 04:27 PM
and one more.
Hallowed
01-10-2004, 04:33 PM
Awesome scores QD. :toast:
QuadDamage
01-10-2004, 04:41 PM
-17C load, cooled by modded prommie at its max. Someone donate a cascade cooling solution, please:D
Thanks, H.
Tom Holck
01-10-2004, 04:50 PM
Nice results QD:toast:
Originally posted by MickeyMouse
damam you all I have to take down CCC tommorow I just have 2 :)
may be tough to beat with that via board, i guess i should try and run some with high fsb using 5:4... Im new to the hexus pifast bench so i dont know if that would help or not
Great scores there Quad:)
Originally posted by MickeyMouse
sat I had a shuttle #2 delivered my man ;) so 270 1:1 now is a joke for me and my ram ;)
quad very nice also "AS ALWAYS"
ahh, sweet:) , i may have to wait on the kingston ram to be delivered for the 270 1:1... i know my chip is stable at 271mhz so i can do that for sure... I think 271 is going to be my limit though unless i can get it colder...
get you an XT and we can all battle it out to the top:D , hopefully be able to get up there with the rest of Team Puss once i get my vga chiller(hopefully in 2 weeks):)
VERY NICE:D , what vdimm for 276 1:1??? your using the kingston right???
just got your PM, i guess its safe to assume you have the vdimm mod working now??
QuadDamage
01-12-2004, 10:05 AM
awesome scores Jason "AS ALWAYS":D
Looks like these 3400+'s are very powerful. wouldn't be surprised to see one of those taking down an FX-51, it's just a matter of having some -50C or better cooling. The problem with FX board is that they can't do better than 295FSB 6:5 and even that is not stable enough for 3D run... i wouldn't mind having a board that can do 320fsb+ with ram at 260-270mhz at most aggressive timeings plus over 3Ghz total mhz.
btw, this Corsair "RE" registered ram can do 270mhz easy even though it's 2x512 and it's ECC:)
http://www.xs4all.nl/~jvlk/43.63.JPG
Sold the 3200+ and Gigapos mobo with his overvolt protection:mad:
The chip seems to be maxed out..also removed heatspreader but that helped nothing..it seems to hit a brick wall at 2880:confused:
Oh well:)
Going for a 3400+ and shuttle next week:toast:
QuadDamage
01-14-2004, 08:05 AM
look at your volts, you need 2.0V+ but then your cooling will prolly be at its max. i would say 50mhz+ is possible at slightly higher v-core.
Originally posted by QuadDamage
look at your volts, you need 2.0V+ but then your cooling will prolly be at its max. i would say 50mhz+ is possible at slightly higher v-core.
I could also bench at that speed with 1.9v on chip
Temps were -58 full load on display..so i had some headroom left...but chip is already sold;)
just snuck in a little 41.66s in hexus_pifast, here is a screenie
Tom Holck
01-14-2004, 02:45 PM
Nice CCC
Thats nr 3:toast:
QuadDamage
01-14-2004, 03:18 PM
So Tom, how can i get my score uploaded? that would be number 3 i guess.
Tom Holck
01-14-2004, 03:44 PM
Originally posted by QuadDamage
So Tom, how can i get my score uploaded? that would be number 3 i guess.
Yes;) 40.67 --nice, close to JCViggen, but he said he don't bench anymore :(
Fill out the opload form:
http://pifast.hexus.net/pifast.php?do=add_form&page=1
And then make a picture of the run here in this forum
I think you already done that here:
http://www.xtremesystems.org/forums/showthread.php?postid=322216#post322216
PMM will upload then.:toast:
QuadDamage
01-14-2004, 03:53 PM
Alrighty Tom. Thanks my man.
vBulletin® v3.7.0, Copyright ©2000-2009, Jelsoft Enterprises Ltd.