Pifast Benchmark

[hipro5]

I wonder where's the Pi-fast page with the resaults???? :confused:

[Caprid]

Originally posted by hipro5
I wonder where's the Pi-fast page with the resaults???? :confused:

Last update 10/06/03. Somebody is napping on the job :D Great job guys, those new motherboards are kickin' some tail :cool:

[hipro5]

Originally posted by Caprid
Last update 10/06/03. Somebody is napping on the job :D Great job guys, those new motherboards are kickin' some tail :cool:

Thanks M8...... :toast:

About the Pi-fast page , I ment that the site is "down" .....

[Caprid]

Try this...

http://pifast.hexus.net/pifast.php

Works from here.

[hipro5]

No....This one is the one I've got and unfortunatelly it doesn't work.... :( Thanks anyways..... :toast:

[sysfailur]

Originally posted by hipro5
No....This one is the one I've got and unfortunatelly it doesn't work.... :( Thanks anyways..... :toast:

Probably just a dead server hop.

[Tom Holck]

Originally posted by hipro5
No....This one is the one I've got and unfortunatelly it doesn't work.... :( Thanks anyways..... :toast:

Give me some time to beat you:D :D

Nice job on vr-zone:

http://www.vr-zone.com/guides/Intel/Northwood/

I done 4366 over your old 4322, and then you manage to do

4474 :slobber:


But mine 4366 is made by booting to the desktop!! My softfsb work, but do'nt upgrade the clock and the wcpuid ?

:toast:

[hipro5]

Originally posted by Tom Holck
Give me some time to beat you:D :D

Nice job on vr-zone:

http://www.vr-zone.com/guides/Intel/Northwood/

I done 4366 over your old 4322, and then you manage to do

4474 :slobber:


But mine 4366 is made by booting to the desktop!! My softfsb work, but do'nt upgrade the clock and the wcpuid ?

:toast:

Thanks..... :toast:

DON'T forget that ALL these(of mine) are made thanks to you....... ;) :D :toast:

[Zeus]

The site is "up"again but hasn't been updated for over a week.
With my 61.87 sec. score i feel a kinda small.
Keep up the challange guys!

[PMM]

Hay some of us are busy ya know ;) Hexus has been down
due to a host move DNS has only just resolved on my slowdem
connection.

Pifast will be updated in a bit give us an hour or some to weed
out the cheaters and dodgy results then I'll put it up.

Regards
PMM

[PMM]

Done :)

[hipro5]

Thank you..... :D :toast:

[macci]

Playing with P4C800 + 2.4C:
http://www.solidhardware.com/macci/p4c800/hex_pi_s_332fsb.gif (http://www.solidhardware.com/macci/p4c800/p4c_hex_pi332fsb.gif)
Vcore = 1.52V :D

[hipro5]

That's a PERFECT 2.4GHz CPU macci.....You are SO lucky man...... :D :toast:

[ctgilles]

http://www.born2oc.be/~ctgilles/images/pifast.JPG
ehr?
ah §§§§... 0.04 behind :D

[Zeus]

Nice score ctgilles! :toast:
Are you gonna submit it, or will you wait till you beat the no1 score?

[ctgilles]

Submitting it atm :)
I know I can already be thankful for such score at such "low" clocks... I'll retry tomorrow ;) for now, my Prommy is nearly dead, needs to regain strenght :D

Hmmm... gonna retry tomorrow tho' at a higher frequency, must be possible :D

[ctgilles]

*notices that back fan wasn't blowing*
*reaches into prommy*
*touches one of the 230V cables*

Guess you know what happened ;) Some pieces of my hand got burnt... Well, I'll still go for the sub-48 tomorrow, but will be hard with these BH5's. Guess Mushkin uses BH5 too?

[hipro5]

Way to go ctgilles..........You're doing good......... :toast:

[ctgilles]

Noticing -3°C idle at 1.71V and 4009MHz... Think I'll refit that evaporator ;)

[hipro5]

That's not good.....-3*C in Idle???........Take care of your Prommie M8..... :)

[ctgilles]

I know, it's nearly dead :D I'm gonna R404a it's ass and buy a new outtake fan cause this one's dead :stick:
Also, the Prometeia hose is bend really weird thanks to the AMD systems :) so I have to try to bend it good :D OMG, I'll start saving for a new prommy ;)

PS: -3°C on a IC7 is like -20°C IRL if I'm correctly?

[hipro5]

Originally posted by ctgilles
I know, it's nearly dead :D I'm gonna R404a it's ass and buy a new outtake fan cause this one's dead :stick:
Also, the Prometeia hose is bend really weird thanks to the AMD systems :) so I have to try to bend it good :D OMG, I'll start saving for a new prommy ;)

PS: -3°C on a IC7 is like -20°C IRL if I'm correctly?

No it's about -13*C..... ;)

[ctgilles]

Good nuff :)

[Dagalidis]

A BIG HELLO to Hipro5.... :toast:
Just continue your GOOD JOB my friend.... ;)

[hipro5]

Originally posted by Dagalidis
A BIG HELLO to Hipro5.... :toast:
Just continue your GOOD JOB my friend.... ;)

Thank you M8.............. :D :toast:

.....and WELCOME to the Xtremes........ :toast:

[ctgilles]

Hey Hipro5... What'd you say, R404 mach1 or mach2?

[hipro5]

Originally posted by ctgilles
Hey Hipro5... What'd you say, R404 mach1 or mach2?

Mach II of corse.....Better "head" design........ ;)

[Tom Holck]

Originally posted by hipro5
Mach II of corse.....Better "head" design........ ;)


But the cooling performance is the same..:toast:

[Vatt]

Originally posted by Tom Holck
Give me some time to beat you:D :D

But mine 4366 is made by booting to the desktop!! My softfsb work, but do'nt upgrade the clock and the wcpuid ?


If in System Properties you set the computer to ACPI instead of 'multiprocessor .....' then WCPUID should update frequency.
However this also disables HTT.
For nice looking screenshot this is just fine ofcourse.. :D

[Dagalidis]

Please tell me how can run PI Fast when overclocked because it dont let me start the bech due to Overclocked CPU.....
This is not a fault from an unstable system but a warning from the app....

:mad: :mad:

[hipro5]

You just "clik" on pi-fast(.bat) which is 1K and the bench starts itself......

[sysfailur]

Well, I've been on a benchmarking hiatus recently heh, but I'm back and this is just the start :P

My 2.4C, P4P800 DLX, and new XMS3500. Everything is stock thus far.

1.600v on the core, aircooled. This would make the 3rd best aircooled score I believe on the pifast scoreboards.

I LIKE THIS BOARD! :) It seems to be giving me 5mhz fsb more stability than my 8KNXP @ stock. Another thing I'm noticing bout my setup, this chip doesn't like voltages over 1.600 on aircooling. It refuses to boot into windows @ 1.675, almost makes it @ 1.65 and 1.6250 works (but it gives me like 1.6v actually).

Anyway, I'm happy. I will be hooking up better cooling later ;)

http://www.maximumoc.com/img/hardware/asus_p4p800_deluxe/294mhz_pifast.png

Also, yeah it's not stable but oo it's purdy to look at.

http://www.maximumoc.com/img/hardware/asus_p4p800_deluxe/303mhz_setfsb.png

[NoStra]

Here my personal best....57.30secs with 4.1 ...NOT v4.2

It does Superpi 1M in 40secs...

Epox 8RDA vdd modded
A Tbred @ 2480Mhz 11x225Mhz DC 2.0 2-2-11

Not bad for under 2.5Ghz ;)

http://129.125.103.64/pifast5730.JPG

[muzz]

Well I just got my prommy, and the 1700+ 0319 is doing ok so far...

http://home.comcast.net/~gpl08/Pifast_55.78.bmp

2736 mhz... 210 x 13

[muzz]

Ok a little better after some more fiddling.....
2792 214x13
http://home.comcast.net/~gpl08/54.22_Pifast__2792_13_x214.77.bmp

[muzz]

Movin' on up.........:D
2823 mhz 13x217 @ 7-2-2-2
http://home.comcast.net/~gpl08/53.80_pifast_2823_mhz_217_x13__7-2-2-2.bmp

[Jeff]

Great work muzz!!! :thumbsup:

[muzz]

Thanks brother Jeff.
Alot more to do yet, but I'm working on it...:D

BTW You didn't get yours yet?

[NoStra]

Muzz can you give this 2.0 11-2-2 memory timing a try? Should be faster......

It's less intensive for the memory, but better scores?! Don't know why....but it works for me!

[Jeff]

Originally posted by muzz
Thanks brother Jeff.
Alot more to do yet, but I'm working on it...:D

BTW You didn't get yours yet?

Nope... at the last second I just couldn't pull the trigger. :) Instead I bought a crap load of water stuff(which I still need for GPU/chipsets if/when I get a Prometeia) and a few other non-computer related things.

I did however pick up a nice little chiller unit... for free... :D
http://forums.teamphoenixrising.net/showthread.php?s=&threadid=15748

Again muzz... great job on the PiFast score... that just looks awesome!!! :toast:

[muzz]

That looks to me like you are going to have some fun Jeff!!
220v , I take it your using the clothes dryer plug..... heheh
GL with it mang, it'll make a great gpu chiller when your finished.

New score, but I'm running into the high fsb/high vcore problem on this NF7-S
2850 13x219 7-2-2-2
http://home.comcast.net/~gpl08/53.47_pifast_2850_13x219_7-2-2-2.bmp

Thanks Again Jeff

[Zeus]

Originally posted by NoStra
Muzz can you give this 2.0 11-2-2 memory timing a try? Should be faster......

It's less intensive for the memory, but better scores?! Don't know why....but it works for me!

Setting memory timings to 2.0-11-2-2 didn't improve my score.
Changing from 2.0-5-2-2 to 2.0-6-2-2 got my score just a tad better.
Best so far is 60.90 sec. @ 208*11,5= 2400Mhz
I'll pick up an slk800 saturday, hoping to get some speed out of my Xp2100. :)
By the way, nice score you got there NoStra :toast:

[muzz]

Originally posted by NoStra
Muzz can you give this 2.0 11-2-2 memory timing a try? Should be faster......

It's less intensive for the memory, but better scores?! Don't know why....but it works for me!

I did 11-2-2-2 on that first score, but for the score above 7 worked a bit better.
I'm obviously not done experimenting.........:D

[JCviggen]

still playing with it... I reckon if I get my cooling performance the way it should be, the 48 sec barrier can go. But I'm leaving on holiday so well... by the time I get back maybe the barrier is 47 :D

[cpulloverclock]

pifast 4.3 is out :)

http://numbers.computation.free.fr/Constants/PiProgram/pifast.zip

[Gleep]

version 4.3 makes a big difference


Last night I made this with version 4.1 nothing special by any stretch.

http://www34.pair.com/gleep/64.86.jpg

And this is today with the new version, same computer settings.

http://www34.pair.com/gleep/50.42.jpg

[muzz]

WTG JC !
Keep up the good work man, and have a good time on the holiday!

Pifast 4.1 is what everyone uses for the challenge, but thx for the heads up Gleep :toast:

[ctgilles]

I am still faster JC, with a higher multiplier. But I do reckon today's the last day and I think JC will be posting some great scores. JC, if you'd like you can borrow my vapo for that 9800 :) Let me know

[hipro5]

Good work JC.......AND have a "cool" vacations......... ;) :D :toast:

[JCviggen]

Originally posted by ctgilles
I am still faster JC, with a higher multiplier. But I do reckon today's the last day and I think JC will be posting some great scores. JC, if you'd like you can borrow my vapo for that 9800 :) Let me know

Not in 3D its not faster ;)

and the thing is the new IC7 BIOS-es are better suited for low FSB. You can make the timings real right. But if you'd try to equal this with a 2.8C on an IC7 I think you'll find you have a lot of trouble even breaking 49 secs. Hell, chances arent that good that you can even do 294 5:4 :(

[ctgilles]

Yeah, I need to make sure it's gonna work, but I have a buyer for my IC7-G so :D

[Gamer]

my personal best.
had a 50 sec flat, but didn't save it :D

[JCviggen]

well.... getting closer ... ;) The IC7 boards are faster in pifast than my P4C800 :( but on the good side the ASUS does kick ABIT ass in 3D (at least going by the IC7 I had)

If only my prom was working the way it should... but i'll worry about that when I get back from holidays :)

http://users.pandora.be/JCviggen/pifastrecord.JPG

[Tom Holck]

Originally posted by JCviggen
still playing with it... I reckon if I get my cooling performance the way it should be, the 48 sec barrier can go. But I'm leaving on holiday so well... by the time I get back maybe the barrier is 47 :D

Or 46:D ;)

I think its time to do something before Oppainter gets his Prommy back from Bowman

Here you are:: Prommy R404 caskade with Vapochill.

I put extra cooling agent on the Prommy, almost going to explode:D :rolleyes: very hot.

Then caskademounting the old Vapochill. At full load on the P4@3.2 at 1.85 volt the Vapochill can't go under +14 degree:flame:

[Tom Holck]

Beat that.

when I come back from holiday it's time to do some serius 3D bench at that speed...:banana: :banana: :banana:

[Tom Holck]

:banana: :banana: :banana:

[Vatt]

Great Pi score , and even more impressive clock speeds on the 3.2

Are those 3.2 all from Costa Rica, or from several plants just as all the other chips?

[Tom Holck]

Originally posted by Vatt
Great Pi score , and even more impressive clock speeds on the 3.2

Are those 3.2 all from Costa Rica, or from several plants just as all the other chips?

The 3.2 is from malaisia batch L317A892 pack date: 6/13/2003

Just mount it last night. The temp was jumping op and down. This morning the AS3 has stabilized. I think a few days more vill improve the contact to the CPU.

[ctgilles]

Nice :)

[Tom Holck]

Originally posted by ctgilles
Nice :)

It might bee to soon to sell your IC7 and the Prommy Mark I:explode:

[ctgilles]

The IC7 is staying if she does 300FSB, the prommy is getting 404 in his ass :D
I'm happy with my 4.2G 2.8C chip :)

[PMM]

\update done chaps :)

PMM

[Caprid]

Most outstanding work guys :cool:

[hipro5]

What the f(l)uck is that??????????..............Shi(f)t............ :D

WELDONE Tom..............To be honest , I expected something like that from you sooner or later..........BUT not 46sec........ ;) :toast:

[hipro5]

Originally posted by ctgilles
The IC7 is staying if she does 300FSB, the prommy is getting 404 in his ass :D
I'm happy with my 4.2G 2.8C chip :)

IC7 can do this fsb unmodded...........Stable fsb is about 318MHz(depends on each chipset of course)..........

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Max_Abit_fsb_png.png

Unfortunatelly at 5:4 can do MAX mem frequency about 233MHz and NO go over than that...........

[Jeff]

46.25? :confused:

/Jeff falls over and knocks himself out...

;) Incredible work Tom!!! :toast:

[Vatt]

Originally posted by hipro5
Unfortunatelly at 5:4 can do MAX mem frequency about 233MHz and NO go over than that...........

So, you are saying that for IC7 with 5:4 divider max FSB is 291 ?

What errors do you get above mem frequency of 233Mhz? Complete system freeze, or no POST or no BOOT?

And that is only vmem modded board?
I don't understand why my IC7 will stop working already at FSB 282(5:4)...

[muzz]

Excellent work Tom !!!:toast:

[hipro5]

Originally posted by Vatt
So, you are saying that for IC7 with 5:4 divider max FSB is 291 ?

What errors do you get above mem frequency of 233Mhz? Complete system freeze, or no POST or no BOOT?

And that is only vmem modded board?
I don't understand why my IC7 will stop working already at FSB 282(5:4)...

Yes ...... between 280MHz+ to 290MHz , you may have random reboots or freezes on a benchmark.........Above 292MHz with 5:4 Ram , no go.......It boots , goes into Windows(not all the time) and reboots,freezes,e.t.c........I just got an EPOX Canterwood Mobo to test it today..........

[bias_hjorth]

Originally posted by Tom Holck
It might bee to soon to sell your IC7 and the Prommy Mark I:explode:


Prommy mark 1 sound very interesting!:banana:

[RootX]

'Ere's mine, :toast:

[bias_hjorth]

ups forgot:

56.34 (231x11)

xp2800

A little bit slow..:rolleyes:

[hipro5]

Way to go RootX.......... :D :toast:

[RootX]

Originally posted by hipro5
Way to go RootX.......... :D :toast:

Thanx Man.....
And a little update,

[Garrett]

AMD Athlon XP Tbred B 1700+ @ 2469Mhz
EPoX 8RDA+ 1.1
Dane-Elec 256MB PC3200
If you need more info then say so :P
http://home.planet.nl/~dikke332/6186.gif
http://home.planet.nl/~dikke332/2469.gif

[Tom Holck]

Originally posted by RootX
Thanx Man.....
And a little update,

Now you only need a few sekunds RootX:D


(only kidding)
Keep op the fine work:toast:

[RootX]

Originally posted by Tom Holck
Now you only need a few sekunds RootX:D


(only kidding)
Keep op the fine work:toast:

Ah, what's the http://www.xtremesystems.org/forums/images/icons/icon13.gif for ?

Don't make me feel bad, man, i'm tryin'... :D
One Mhz more and the damn thing will explode, :toast:

[ctgilles]

Hmmm, I got my ASUS :D

[hipro5]

A little beter here too........ :D

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_47.52_png.png

[PMM]

PMM pulls his finger out..

Update done folks :)

[macci]

I wonder what kinda PiFast result would this kind of speed give you:
http://www.geocities.co.jp/SiliconValley/5883/result/32c/28-5040.gif
By TAM, The First SuperPi 1M run at over 5GHz and obviously new World Record....CRAZY! :toast:

[bias_hjorth]

wooooot sick result!!!:slobber: :cool:

[macci]

nope its not the first sub 30sec.. both TAM and OMEGA have done 29secs couple weeks ago

Offical SuperPi 1M ranking (http://www16.big.or.jp/~bunnywk/cgi-bin/superpi.cgi)

[hipro5]

Those guys are crazy......... :D

[Fewture]

http://www.fewture.cistron.nl/img/59.06_11x219_2412.JPG

1800+ JIUHB0304@ 2412Mhz 2.22V (11x219
Corsair TwinX 2x256 @ 438 6-2-2-2 DC
NF7-S Rev 2.0 Vdd mod @ 1.8 (I think.. no multimeter right now so playing it safe)

Cooling:
Custom block (Maze3 clone)
BI2 xtreme

There's more fsb in it..but when going to MP 10.5 the system gets very unstable :( To make things worse my 2100+ @ 2537 had to lose some cache and live its life as a Duron :rolleyes: I'll be getting a new one this week (RMA) I think.. (I hope :D ) Fingers crossed it wil fly :toast:

[Tom Holck]

Originally posted by MickeyMouse
wow hold sh*t... and to think a 34s PI at 3ghz+ barton or 4ghz P4 is fast..

BTW macci is that the first sub 30s PI ever??

Just tried that test.

Is 33s OK?

It's 33 sek on 4260 and also 33s at 4353 ?

funni test.:rolleyes:

[Tom Holck]

Just registred on the list on place nr 11

I can se Macci is nr 15 with 34sek:D

The test in hole sekunds is to ruff. You can't see difference on 4260 and 4353
:mad:


I think Pifast is more fun:D

[bias_hjorth]

I prefer superPI.. anyway nice speed there tom!!

[PMM]

Hi

Sorry chaps :( Hexus got hacked so at this time the PIfast
Challenge is not available.

Luckerly nothing is lost, and as soon as I get the all clear
I shall FTP everything up to the site.

Hopefully Normality shall resume ASAP.

Thanks

(PMM)

[Zeus]

Very sad to see that some ppl who cannot make a decent Pifast run just hack the site...very sad!

PMM, keep up yhe good work, this Pifast challenge is very competitive and keeps me busy for a while. :)

[PMM]

lol, the pifast is a sub domain or Hexus, they provide our
hosting for the pifast challenge, while myself & m@tt do
the updates time permitting.

I doubt they hacked it for the Pifast but well ya never know :D

The main Hexus got hacked and resulted in problems for
the sub domains.

David is on hols at the mo so I lost to whats happening,
looks like either the sub domains are defaulting or everything
got lost.

Either way I can't get into my part of the site :(

But everything is intact Pifast wise, just have to do a FTP
and any result missing in the database are in the auto
Emails it sends me when new results are submitted.

So Keep pushing I want some new records set my the time its
back up and running :D

[Zeus]

Well oke, i improved my score, got 58.14 sec. now.
11x222=2442MHz mem.444MHz

[Jupiler]

Update :

finally under 50 sec :banana:

http://users.skynet.be/MetalHead/Pifast/4931sec.jpg

[nik.dk]

Barton 2500@2300mhz 11,5x200 = 62,73 secs in hexus_pifast.

[Dagalidis]

Here is my best PI from my BARTON 2500+ @ 2555(232x11.5)
Not much ..... but GOOD enough :D
http://users.in.gr/dagalidis/assets/barton_pi39b.jpg

[Zeus]

Originally posted by Dagalidis
Here is my best PI from my BARTON 2500+ @ 2555(232x11.5)
Not much ..... but GOOD enough :D
http://users.in.gr/dagalidis/assets/barton_pi39b.jpg

That's SuperPi you got there, we're talking PIfast here (v4.1)
but 39 sec is a nice score for SuperPi, that's for sure. :)

[Fewture]

Got me a new Barton 2500+ today... I hurt it a little bit and this is what she said:

http://www.fewture.cistron.nl/img/54.90_11x231_2549.JPG

:banana:

Barton 2500+ @ 2549Mhz AQXEA 0324 (forgot the rest of the code :D TLPV or something..not sure )
NF7-S 2.0 @ 231MHz 2.1V
Corsair Twinx XMS3200LL @ 462 11-2-2-2 3.15V (V modded)
plain water

My 12V line goes down when @ high fsb + high Vcore.. WOuld you guys thing there's any gain in modding it back to 12V? Wouldn't hurt offcourse..

[Zeus]

Lucky bastard, where'd you get that CPU from? :)

[bias_hjorth]

wow nice pi_fast..

what cpu speed is that at?

[CodeRed]

Woot!

Finally cracked the big 50

http://users.tpg.com.au/spark69/b2/pifast49.99.jpg




getting this chip over 2.9gig was like passing a stone :eek:

[bias_hjorth]

real nice.. what cooling? and what chip?

[ctgilles]

Originally posted by bias_hjorth
real nice.. what cooling? and what chip?
I'm guessing a Prometeia and a Barton (2500+?)

[Fewture]

Originally posted by bias_hjorth
wow nice pi_fast..

what cpu speed is that at?

It's right there in the post :D 2549Mhz.. barton 2500+ on plain water :)

[bias_hjorth]

ahh I must be blind :-D

anyway real nice oc!

[CodeRed]

Originally posted by ctgilles
I'm guessing a Prometeia and a Barton (2500+?)

Yeap, its a R404a modded prom and a 2500+ AQXDA 0317 MPM

[Fewture]

Originally posted by CodeRed
Yeap, its a R404a modded prom and a 2500+ AQXDA 0317 MPM
2900Mhz is pretty good even for a R404a prom. I know another guy that can do 2800 w/ an R404a prom. Also a 2500+.

[CodeRed]

Has the pifast page moved or something?

[PMM]

Nope

Its posted up the page somewhere, but anyway Hexus
our host got hacked :( Awaiting for the owner to retern
off his hols to sort the damage to the sub domains at the
mo everything reverts to the hexus forums.

It will be back up as soon as possible and i'll let you know
as soon as it is.

[PMM]

All systems go again :banana:

http://pifast.hexus.net

[Fewture]

The fastest I could get it to run..

http://www.fewture.cistron.nl/img/53.93_11x236_2598.JPG

Barton 2500+ AQXEA0324 TLPW 2.28V
11 x 236
Watercooled CPU + NB
Vdd modded
Vddr modded
etc etc

[Bhairav]

With an AXP 2400+ @ 2.2 Ghz, 147*15

[Zeus]

Originally posted by Bhairav
With an AXP 2400+ @ 2.2 Ghz, 147*15

Increase on FSB and drop multi, you'll be amazed. ;)

[Learn]

hi

my best hexus pifast
it's with my waterchiller, water 18°c room 27°c

http://membres.lycos.fr/ftpad/images/P42.6C/HexusPifast52.80.png

[Caprid]

Nice shot, Learn...:) :toast:

I'm lookin for under 50....got a new chip????

CodeReD: Congrayz dude!! :toast: That's a tough nut to crack :up:

[PMM]

You'll have to bare with me until Monday for a update chaps
Currently typing this from a Pubs bar computer at a LAN I'm
at :)

So bare with me till Mondat to see any new result.

Regards
PMM

[Learn]

Thx Caprid :)

[DeadHeart]

Could someone please provide me this file in the zip, tar, tar.gz or tar.bz2 format so that I can open it in linux and run it? I can't open rar files. :stick:

[hipro5]

Originally posted by DeadHeart
Could someone please provide me this file in the zip, tar, tar.gz or tar.bz2 format so that I can open it in linux and run it? I can't open rar files. :stick:

Here you are at zip format.........

Pi-fast V4.1 in zip format HERE....... (http://www.pctech.gr/hipro5/downloads/hexus_pifast.zip)

[PMM]

The download on the http://pifast.hexus.net site is in zip format

.. http://pifast.hexus.net/hexus_pifast.zip or just click the
download button off the frontage of the site.

[DeadHeart]

Ops! My mistake! :rolleyes: Thanks for the link.

[IamAnoobieCheez]

Here is my old bench. xp1700 tbred@ 2784mhz wattachilled.

53.48 sec.





http://portfolio.iu.edu/skrska/2784mhz_piFast.png




http://portfolio.iu.edu/skrska/piFast_data_53.48.png

[Liquid3D]

I downloaded PiFast 43
And enteretd the following parameters;
0
0
10000000
1024
0
Is this the correct input? Hers my results but I'm not sure if I'm doing this right. I looked all over the Internet tpo discover HOW exactly to run the benchmark to no avail.

The specs below were attained at 225FSB, 2706MHz. Another thing how the heck do you take a screen-shot without it dissapearing? I lucked out below, by snaping it as the final figures were tallying. But I don't know If I'd have time to run WCPUID and take the snapshot"

[Caprid]

Originally posted by Liquid3D
I looked all over the Internet tpo discover HOW exactly to run the benchmark to no avail.


http://pifast.hexus.net/instructions.htm


:)

[Liquid3D]

I should be ashamed at myself. Studying Neurophilosphy, which is replete with philosophical essays about Connectionism, Physicalism, Mathematical Methods in Linguistics, Semantics , even Panpsychism. And I go and use a universal quantifier like all, for shame. Obviously I did not "look all over the Internet..." or i would have found that instruction page.

Someone ought to beat me with a copy of Aristotle's Doctrine of the mean. (but it's so heavy ouchy).
:p:

Thank you for that link.

[Liquid3D]

OK here's the real deal. And it's not a pretty site (at least I don't think it is). I think I had everything disabled during this one, such as DSl etc.

[PMM]

*** Remember If you attempt to submit that to my
PIfast site I'll Reject it ;) ***

We use Pifast version 4.1 as a standard ;)

The Download in my site uses a batchfile with all the settings
pre-defined.

[Liquid3D]

The one above your reply is your's, it needed no values to be entered and pauses for the user to take a screenshot.

[PMM]

Sorry if i'm being a bit OTT ;) just like to make sure
the correct version is used I get a lot of submissions
where people either quote the series computing time
by mistake or attempt to slip a 4.3ver in though it does
show up, as the time difference is rather different to
the expected norm.

Luckerly most of the cheaters are 99% hotmail users :D
so its even easier to tell :lol:

[Garrett]

I finally got below the 60 second mark :D
http://home.planet.nl/~dikke332/5980.jpg (http://home.planet.nl/~dikke332/5980.jpg)
Somehow it's not very stable above 2400mhz

2500+ 0330 XPMW and epox 8rda+ 1.1 vdd@1.74
Corsair TwinX LL 2x256

[Liquid3D]

Originally posted by PMM
Sorry if i'm being a bit OTT ;) just like to make sure
the correct version is used I get a lot of submissions
where people either quote the series computing time
by mistake or attempt to slip a 4.3ver in.. I totally see where your coming from. And I want to ensure i have the right version. In fact I knew 41.23 seconds was too good to be true. (by the way is 50. seconds good?)
What I still don't understand is cheating? Why the Hell would people cheat on a practically random system? I mean it's really for the individual to look at and say, "Oh wow, doing this, and adjusting that, produced such and such a result..." It's amazing when people lie to themselves? If you were giving away Porsche's maybe I could see the motivation for the cheaters to come out? It's almost lke those people cheating on the Folding results? What in God's green earth were they thinking? Cheating cancer fighting effort. I can't even be mean enough to say; "Karma will get their arse, and they'll end up expiring from the very same disease. Had they not cheated, perhaps one more legitimate cycle would have broke the code."
Anyway I do appreciate your setting up this whole thing so we can enjoy it, and measuere our success. Thanx ;)

[CarNabY]

New score with 2.4c.
I need DDR for 5:4 :shrug:

http://space.virgilio.it/tiziano.guglielmi@tin.it/PIF/PIF%2048.86.gif

[Tom Holck]

[QUOTE]Originally posted by CarNabY
[B]New score with 2.4c.
I need DDR for 5:4 :shrug:

Nice CarNababY:toast:

I have THE record, you now. But also worked with the P4@2.4
at that time I only manage to do 49.25
I think you can pusch the men a little more
;)

[sysfailur]

Well this is not spectacular or anything, but it is a bench!

I just got a 1600mhz Pentium-M, 1gig ddr Sony Z1 VAIO notebook and it hit 80.14seconds! This thing is pretty zippy!

EDIT: My overclocking rigs are on hold right now as I'm starting school pretty soon and don't have much time for it--plus I'm hooked on star wars galaxies. :P

I'll be back later with (competitive) results I'm sure! :)

[macci]

http://www.solidhardware.com/macci/3ges/3GES_hexuspi_312x13_4881.gif

3G ES at 13x312 DDR500 2-2-2-5, P4C800 with aircooled NB, R404ed CPU

[Liquid3D]

macci your the King of Xtreme brother. Even if my Prometeia was up and running I'd never come close to that. Great work.

[Garrett]

Durondude (also knows as JCviggen) managed to score 48.41 :)

Check this out:
GoT (Gathering of Tweakers) forum is having the challenge for a while now :)
http://pifast.fewture.net/

[Kunaak]

just playing around with the "Opp" Bios for my MSI.
it certainly helped getting control of my Cas latency again ;)

my ram doesn't seem to wanna go above 225 at cas 2-2-2-5.
time to burn it in for a few days to fix that :)

this is pretty damn fast for a MSI.

[Zeus]

Originally posted by Garrett
Durondude (also knows as JCviggen) managed to score 48.41 :)

Check this out:
GoT (Gathering of Tweakers) forum is having the challenge for a while now :)
http://pifast.fewture.net/

Oh yeah, check out place no 13, i think it's a pretty fast bugger, just on air! :D :D

[CodeRed]

Originally posted by Garrett
Durondude (also knows as JCviggen) managed to score 48.41 :)

Check this out:
GoT (Gathering of Tweakers) forum is having the challenge for a while now :)
http://pifast.fewture.net/

A few of those results seem inconsistent

eg no 4, barton @ 2796 MHz with only 233 FSB getting sub 50:confused: . I would expect 51.5 sec or so.

I ran mine at 12.5x232 with 2-2-2-10 CPU Interface on and only got 49.99 sec :p:

[Garrett]

Originally posted by CodeRed
A few of those results seem inconsistent

eg no 4, barton @ 2796 MHz with only 233 FSB getting sub 50:confused: . I would expect 51.5 sec or so.

I ran mine at 12.5x232 with 2-2-2-10 CPU Interface on and only got 49.99 sec :p: Yeah well, if I run my benchmark on my Abit NF7-S 2.0 at 11.5x200 I get around 63.5 seconds, however a friend of mine has an ASUS A7N8X and gets 61.17 at 11.5x200
(edit: we both have an AMD 2500+ cpu)
The same memory timings and everything :confused:

Anyway, nice fight at the top, although it's still a bit quiet the last few weeks :D

I'm really expecting JCviggen or OPPainter, or even Macci to hit the 47.xx mark :D :) :thumbsup: :stick:

[hipro5]

Ooouuuppppsssss.........I finaly "broke" the 47sec barrier......Watch out Tom.....I'm coming for you my friend........Also you have to update your PCMark2002 Tom...... ;) :toast:

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_46.87_png.png

[CarNabY]

Originally posted by hipro5
Ooouuuppppsssss.........I finaly "broke" the 47sec barrier......Watch out Tom.....I'm coming for you my friend........Also you have to update your PCMark2002 Tom...... ;) :toast:


:eek: :eek: :eek:

[hipro5]

He,he,he........Climbing UP little by little........ :D

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_46.67_png.png

[Tom Holck]

Originally posted by hipro5
Ooouuuppppsssss.........I finaly "broke" the 47sec barrier......Watch out Tom.....I'm coming for you my friend........Also you have to update your PCMark2002 Tom...... ;) :toast:

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_46.87_png.png

Great Hipro5 my friend:toast:

-I have to have a new valve on my Prommy to get some more R404a on. For now only going 4200. Look forward to se the power of your R507 system
Be sure to vakuum well before you fill it up. -And cool the compressor well, its gets hot. Danfoss tells me that it only can work for some time. :rolleyes: But is that minutes, weeks or months? -they can't tell.

And the PCMark2002 :toast:
Its close to D.J 's dry ice run, that must bee the "limit"
Tried once, but not god:(

http://service.futuremark.com/compare?pcm=1418998

only 10554 ....2! more have to gain some more load on the system...

[hipro5]

Originally posted by Tom Holck
Great Hipro5 my friend:toast:

-I have to have a new valve on my Prommy to get some more R404a on. For now only going 4200. Look forward to se the power of your R507 system
Be sure to vakuum well before you fill it up. -And cool the compressor well, its gets hot. Danfoss tells me that it only can work for some time. :rolleyes: But is that minutes, weeks or months? -they can't tell.

Thanks Tom........ :toast:

I will not work the R507 with the Prometeia Compressor.......I have a new biger one........ ;)

[Garrett]

Originally posted by hipro5
He,he,he........Climbing UP little by little........ :D

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_46.67_png.png :slobber: :slobber: OMG... :thumbsup: :thumbsup:
Truly remarkable :thumbsup:

[hipro5]

Originally posted by Garrett
:slobber: :slobber: OMG... :thumbsup: :thumbsup:
Truly remarkable :thumbsup:

Thanks M8...... :toast:

[IamAnoobieCheez]

Looks like I'm one of the very few guys achieving highest clocks and the fastest piFast time with a xp1700 in the waterchilling class, no pelt. ;)

[Garrett]

Originally posted by hipro5
Thanks M8...... :toast:
Correct me if I'm wrong... you still 'must' beat Tom Holck's time of 46.25 right? ;)

Nevertheless :thumbsup: great scores guys :)

Who's gonna be the first to hit 45? OPP? Tom Holck? hipro5?

Place your bets :D

[Tom Holck]

Originally posted by Garrett
Correct me if I'm wrong... you still 'must' beat Tom Holck's time of 46.25 right? ;)

Nevertheless :thumbsup: great scores guys :)

Who's gonna be the first to hit 45? OPP? Tom Holck? hipro5?

Place your bets :D

:rolleyes:
or Macci.. OPP have never been interested in Pifast.

I estimate that to do 45 we will have to do about p4@4500 mhz, its difficult even with better coling than modded-moddet-R507a-R404a-Prommylike something...But the comming Prescott vil sure do it -easy.
Like Bowman and Hipro5, I am also working on a better cooling system, its complicated and it takes time to do.

Better cooling and Prescott, at the end of the year, will make some damage to the Pifast list I think
;)

[hipro5]

Prescott ALL THE WAY is the solution.....1MB cache..... :slobber:

[Tom Holck]

Originally posted by hipro5
Prescott ALL THE WAY is the solution.....1MB cache..... :slobber:

And the 1 MB at 5GHz++ :slobber: :slobber:

[hipro5]

Originally posted by Tom Holck
And the 1 MB at 5GHz++ :slobber: :slobber:

Double drolling Tom....... :slobber: :slobber: :D

[RootX]

A taste of 1MB cache, straight from a Dell laptop with crappy pc2100 memory...

[hipro5]

Shi(f)t........Laptop with this pi-fast time???......and at 1600MHz only???.......and crap Ram...???? :D

1. This laptom MUST be overclocked........ :D
2. Bring it here to me........ :D

[RootX]

No, hipro5 m8, no way to fit ur promie into this thing, :p:

[macci]

When there is will there is always a way :D
Isnt that like a super P3 basically (P3 with bigger L2 and better bandwidth)?

I'm at 47.19 so far with 3.2@4333MHz (1.70V on P4C800). Next task is to put this on MAX3 and see if its even faster ;)

[hipro5]

Originally posted by macci

I'm at 47.19 so far with 3.2@4333MHz (1.70V on P4C800). Next task is to put this on MAX3 and see if its even faster ;)

Here we go again........ :D

Way to go macci........ :toast:

[macci]

Thanks m8 :)
your my next target btw :D

[BioBlade]

offtopic:

macci would you like to help me with my fx5900ultra to get the best out of the card ?

please contact me @ Bio_Blade@hotmail.com


thank you verry much:p:

[macci]

man the MAX3 is prolly the worst 875/865 mobo I've ever tested. Using pretty much slowest bios settings I can not go any higher than 252FSB (5:4 divider)!? In 1:1 mode maxes at 220ish (Vdimm 3.2V.. does about 245 on p4c800 with similar volts/settings). Also Vdimm jumps up and down.. from 3.02 to 3.35V when bios set to 3.2V
So P4C800 is going back in and wont be takin it off until ASUS releases a new one :D

bioblade, just OC the hell out of it using either powerstrip or nvidia control panel coolbits, if you want 3dmarks set d3d settings to 'best performance' from nvidia control panel. When you OC go up like 5MHz a time and run 3dmark03 and see that you are not getting artifacting and that the score actually improves. Once the score starts to get worse you've OCed it too far.

[hipro5]

Originally posted by macci
Thanks m8 :)
your my next target btw :D

You have to be fast cos I'm about to break the 46 sec barrier........ :D

[Caprid]

Here's my latest endevor


http://caprid.homestead.com/files/piopt53.89.JPG


Thats with Registered PC2700 @7-3-3-2.5 I think running 193Mhz
Air cooled on the CPU, once I get the prommie head on there somehow and some PC3200 it might improve the time alittle :)

[hipro5]

Originally posted by Caprid
Here's my latest endevor
Thats with Registered PC2700 @7-3-3-2.5 I think running 193Mhz
Air cooled on the CPU, once I get the prommie head on there somehow and some PC3200 it might improve the time alittle :)

What???......At only almost 2300MHz????,.......Shi(f)t.......... :eek:

[CodeRed]

Originally posted by Caprid
Here's my latest endevor

Thats with Registered PC2700 @7-3-3-2.5 I think running 193Mhz
Air cooled on the CPU, once I get the prommie head on there somehow and some PC3200 it might improve the time alittle :)

Cant wait to see the prommie results :D

[Caprid]

Unfortunately, that won't be for a while yet, the board fried and took my PSU along with it, I just hope the CPU is 0K. Only had it running 40 or so hours :(

[hipro5]

Originally posted by Caprid
Unfortunately, that won't be for a while yet, the board fried and took my PSU along with it, I just hope the CPU is 0K. Only had it running 40 or so hours :(

Shi(f)t again.........These things shouldn't have happen.......Sorry to hear(read) this M8..... :(

[Caprid]

Thanks for the condolences hipro :) Like I said didn't get much time with yet, but though you might like to know it runs SETI better than PiFast ;) :D

[macci]

Originally posted by macci
I'm at 47.19 so far with 3.2@4333MHz (1.70V on P4C800).

Here is the screenshot of that run:
http://www.solidhardware.com/macci/32c/32c_4333_hexpi_4719.gif

[zakelwe]

The times have really come down since the last time I looked .. nice work all.

I'm wondering what we'll be looking at come December with either Athlon 64 or Prescott.

Regards

Andy

[hipro5]

Geting a bit closer to 46 sec......Still with R404 gas...... ;) :D

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_46.53_png.png

[macci]

Very nice :toast:

what multi x FSB was that at?

[hipro5]

Thanks........ :toast:

This was with multi x 15 and 288MHz fsb at 5:4 ........ Today I benched with 1:1 CPU:RAM at 262MHz and Cas 2-5-2-2 with x 16 multi and I got 46.50 sec........One of my Ram sticks is errorfree at 269MHz(538MHz DDR) at Cas 2-5-2-2 and the other is errorfree at 263MHz........Both of them are errorfree at 261MHz(in Dual Channel)......IF my second one was as good as my first one , I think I could bench at least at 266MHz and 1:1, which means sub46 sec........I'll try to find a better Ram stick......... ;)

[Tom Holck]

Originally posted by hipro5
Thanks........ :toast:

This was with multi x 15 and 288MHz fsb at 5:4 ........ Today I benched with 1:1 CPU:RAM at 262MHz and Cas 2-5-2-2 with x 16 multi and I got 46.50 sec........One of my Ram sticks is errorfree at 269MHz(538MHz DDR) at Cas 2-5-2-2 and the other is errorfree at 263MHz........Both of them are errorfree at 261MHz(in Dual Channel)......IF my second one was as good as my first one , I think I could bench at least at 266MHz and 1:1, which means sub46 sec........I'll try to find a better Ram stick......... ;)

Nice:toast:

You are closing in.. hope Prescott comming soon. I can't improve the 46.25. Same problem 1:1 unstable over 272-273 at Cas 2,5-6-4-3 ? (corsair4000). cas 2 won't work.
working on the cooling, it will be 2 high pressure cascade compressors. Cold side at -90 degree. Cooling-power 700w at
-50 and 130w at -90, with a Prommy head. (hope it can take it). The cooling is warm side R404 and cold side etan, R170a it can explode :flame:

Just ruin my gainward5900ultra:(
The best radeon9800 pro is also dead.
Now only a first realise Radeon going max 525/418 sad.

Call me if you get a Prescott ES ... I might get you a -90 cascade.
:D

Macci, same results on IC7Max3 here back to my IC7 G !

[macci]

...BOOM!

sorry boys but I just had to do it! couldn't help myself..

the ugly LN2 score:
http://www.solidhardware.com/macci/32c/32c_hexpi_4278.gif
:D

3.2C@4810MHz (Vcore 1.82V)
P4C800 (1008 BIOS)
2x256MB HyperX PC3000
LN2

[Amoeba Assassin]

:slobber:

you should clockgen instead of setfsb, it is far better

[Zeus]

OMG!!!!! :slobber:
That'll be a hard nut to crack!!!
Congrats! :toast:

[macci]

Thanks :)

still have maybe 2L left so if I'm very lucky I might be able to improve that tomorrow
but more than anything I want to hit the 5GHz mark (even if it is just screenshot stable)! I'm at 4954MHz (http://www.solidhardware.com/macci/32c/4954_id.gif) now.. had it at 4997 which rebooted quite quickly

[cpulloverclock]

Originally posted by macci
Thanks :)

still have maybe 2L left so if I'm very lucky I might be able to improve that tomorrow
but more than anything I want to hit the 5GHz mark (even if it is just screenshot stable)! I'm at 4954MHz (http://www.solidhardware.com/macci/32c/4954_id.gif) now.. had it at 4997 which rebooted quite quickly impressive but clockgen is better for a screenie

[hipro5]

You CRAZY macci........... :D :toast:



Sorry to hear about your VGA Tom......... :(

On Saturday I'll bench with my Prommie cascaded with RootX's Mach II .........I'll see what can I do........ :D

[RootX]

Pure madness.... hell.....
:slobber:

[macci]

thanks :)

some pics from the test rig:
1 (http://www.solidhardware.com/macci/32c/cooling/ln2_setup1.jpg)
2 (http://www.solidhardware.com/macci/32c/cooling/ln2_base_temp.jpg)

[CarNabY]

Originally posted by macci
thanks :)

some pics from the test rig:
1 (http://www.solidhardware.com/macci/32c/cooling/ln2_setup1.jpg)
2 (http://www.solidhardware.com/macci/32c/cooling/ln2_base_temp.jpg)

Congrats !!!! :banana:

In Italy it says itself :
The class is not water !! :thumbsup:

[macci]

impressive but clockgen is better for a screenie
so it seems..
..ROCK ON 5GHz! :D
http://www.solidhardware.com/macci/32c/5ghz_id_s.gif (http://www.solidhardware.com/macci/32c/5ghz_id.gif)

[FUGGER]

Nice, grats!!

[cpulloverclock]

Originally posted by macci
so it seems..
..ROCK ON 5GHz! :D
http://www.solidhardware.com/macci/32c/5ghz_id_s.gif (http://www.solidhardware.com/macci/32c/5ghz_id.gif) ouch :eek: :slobber:

[Mad Overclocker]

Very nice overclocking !!

[Liquid3D]

What else is there to say? Macci, no one touches you. Your the best.

[Intronic]

MACCI!! Omfg thats great :D

nice ln2 ocing !! :slobber:

[Chriviper]

HEY IS PIFAST A FREE PROGRAM AND IF SO DO U KNOW WHERE I CAN GET IT?

[macci]

Hexus PiFast Download (http://pifast.hexus.net/hexus_pifast.zip)

[Chriviper]

Thank you very much Macci!!!:toast:

[Fewture]

Somehow I'n not surprised Macci... :D Thats...uhmm... Xtreme!!!

[Tom Holck]

Originally posted by hipro5
Prescott ALL THE WAY is the solution.....1MB cache..... :slobber:

Just found this:

http://www.theinquirer.net/?article=11576

P4 3.2 EE with 2Mb cache:slobber:

[macci]

L2=512k + L3=2MB = total 2.5MB!
Another article (http://www.anandtech.com/IT/showdoc.html?i=1870)

[hipro5]

Guys.....I think that with this CPU, we will not nead the Prescotts.........Imagine 2.5MB cache runing at 1:1 at 4GHz+ ....... :D ;)


BTW.....I forgot to upload my new score......I did a bit "vacum" this weekend and I'm very close.......If I can bench 1MHz more I think I'll be at 46.26 sec ......... :D

http://www.pctech.gr/hipro5/photos/P4%20ES/png/Pi-fast_46.36_png.png

[Creative]

Originally posted by macci
so it seems..
..ROCK ON 5GHz! :D

Now that is just amazing Macci :) Congrats and my hat off to oyu sir :thumbsup:

Hipro, another fine result my friend :) I just got a 2.4C L321 today and she does 3.4 at 1.48vcore on default stock cooler so cant wait to get her into the mach 2 and improve my score for the thread :)

....maybe a 4ghz chip??!! :banana:

[hipro5]

Thanks M8....If it's a good L321 piece,you'll do 4GHz.....My friends here , do about 3.9 to 4.05GHz with those L321 2.4 and 2.6 .........Have luck....... :toast:

[Tom Holck]

I like that you keep going

:toast:

[hipro5]

Originally posted by Tom Holck
I like that you keep going

:toast:

Thanks my friend........ :toast:

[Fewture]

Guys, JC has an FX...and a prommy... :eek: :eek:

44.73!! @ 2833MHz

:banana:

Some Belgian grazyness for ya :D :D I'm sure he will post the screen later..

[JCviggen]

:)

http://users.pandora.be/JCviggen/pifast13x218.JPG

[Jeff]

Nice! :slobber:

[PMM]

Result up :)

[zakelwe]

Nice score JC, I see you beat that guy with top AMD score 3Ghz XP by 3 seconds ;)

:toast:

Any details on FSB, memory, whether you had 600 rather than 800 hyperlink ?

I see you will be going faster soon :)

Can you beat Intel ?

Regards

Andy

[JCviggen]

i dont think i can get maccis LN2 score... thats a bit of another league anyway... if i could VDDR mod the SK8N maybe i could do something though ! but unfortunately i cant. I reckon the HL is 600 because its on the NF3 ? FSB was 218 , memory 218 at 2,70V, 2-5-3-2. difficult to find better registered DDR than that i think but of course I did disable ECC.

[Caprid]

Originally posted by JCviggen
:)

http://users.pandora.be/JCviggen/pifast13x218.JPG

Yikes!! Nice job :toast:

There wouldn't be anyway you could share that BIOS would there? I might be able to help with the volt mods :)

[JCviggen]

no can do m8 but to be honest i think the latest ASUS BIOS - or the beta ones - do offer multi control and voltage its just not visible until you plug the unlocked FX into it... with an operon in it all these options dissapeared from the BIOS

[PMM]

Wonder if there are bridges under those heatplates ?

Go on take it off :stick: :D

J/Kidding :p:

Too be honest an increase in FSB and slightly tighter timings
(board allowing) i'm sure top is possible there is a 1.95 sec gap
at least 1sec could be knocked off with FSB alone I suspect
more with the A64 as my initial impression is it scales quicker
to increases compared to currect XP range.

[bias_hjorth]

mickeymouse --

nice one.. using new 64 or your "old" barton?
either way its very impressive.! gratz.

[bias_hjorth]

nice one.. man these new ones really gives high performance for low mhz´

[Caprid]

Originally posted by JCviggen
with an operon in it all these options dissapeared from the BIOS

That would explain why the voltage options disapear on me with all the betas, it has a 246 in it. Did you try it with a Opteron in? And did you by chance try the 200Mhz for the RAM with an Opteron? My don't work, I'm starting to think it might not be the BIOS but the Opterons memory controller can't take 200Mhz.

[Caprid]

Originally posted by MickeyMouse
http://jason57.iwarp.com/a64pit.GIF


Nice one Mickey :cool:

[ctgilles]

Nice one Mickey :)
Seems those new AMD's are just what I want :D
Gonna get me a FX when they come out with decent chipsets. :)

[bias_hjorth]

Originally posted by MickeyMouse
#6 overall moving up the ladder ;)



hehe nice... go get em tiger -- or mouse..:toast:

[JCviggen]

http://users.pandora.be/JCviggen/pifastfast.JPG

i just need more memory speed...

[Tom Holck]

Nice :slobber:

Do you think its the mem that limiting the OC. Will the CPU pass 3000/3100 if better cooled?
Thinking on my Prommy cascade :D

44.78 at 2833
43.33 at 2925
It will pass Macci at about 2980 !!

That will bring the Pifast back on track, its better witout LN2

[JCviggen]

The CPU wont load at 3G even if I raise multi and drop mem speed to 100 MHz... but if i could run lower multi and 140 FSB oh boy :)
although I am sure i could run and bench 3G with 1.85V

[PMM]

Updated .. & request carried out ;)

[JCviggen]

Originally posted by PMM
Updated .. & request carried out ;)

cheers ! just a tiny detail you know no big deal but still looks more familiar like this :toast: :)

[PMM]

No Probs I aim to please :)

[Tom Holck]

Originally posted by JCviggen
The CPU wont load at 3G even if I raise multi and drop mem speed to 100 MHz... but if i could run lower multi and 140 FSB oh boy :)
although I am sure i could run and bench 3G with 1.85V


Have you seen this:

http://www.vr-zone.com/?i=131&s=1&61408

:eek:

[JCviggen]

Well i have a max of 3013 MHz with a prom so I find 3020 MHz super pi with dry ice kinda low

[ctgilles]

Yeah, JC's rig is even more :slobber:

[macci]

Well i have a max of 3013 MHz with a prom so I find 3020 MHz super pi with dry ice kinda low
He did SuperPi 8M (about 6mins) at 3024MHz and SuperPi 1M at 3050MHz which - as far as I can see - is over 100MHz higher than you max PiFast speed. And dryice ain't much colder than ur prommy so I wouldn't call that result 'kinda low' ;)

[JCviggen]

Originally posted by macci
He did SuperPi 8M (about 6mins) at 3024MHz and SuperPi 1M at 3050MHz which - as far as I can see - is over 100MHz higher than you max PiFast speed. And dryice ain't much colder than ur prommy so I wouldn't call that result 'kinda low' ;)

dry ice is close to -80C i thought... which is twice as cold as a prom :)

[hipro5]

Weldone you guys..........Keep on the good work there......... :toast:

[Chriviper]

Absolutely incredible PI scores everyone...now stop fighting, kiss and make up:toast: .....just state the facts not opinions!...keep up the good wrk!!!!:stick:

[isp]

I don't see any fighting :confused:

[hipro5]

That's pretty cool M8........You are a strong player....... :D :toast:

[hipro5]

Originally posted by MickeyMouse
thanks HIPRO.. I figure I need 264-265 1:1 to get down to you and tom so your safe for now I think ;) it seems like an easy bench, but going .1 seems like alot of extra HW

You're welcome........I've got ONE 256MB Kingston Value Ram PC2700(DDR333) with BH-6 chips onboard which can do errorfree in Memtest-86 and Windows 269MHz(538MHz DDR) at Cas 2-5-2-2 and everything else in full speed......I wish you where somewhere near here so as to borrow it to you for benchies....... :toast:

[Tom Holck]

Originally posted by hipro5
You're welcome........I've got ONE 256MB Kingston Value Ram PC2700(DDR333) with BH-6 chips onboard which can do errorfree in Memtest-86 and Windows 269MHz(538MHz DDR) at Cas 2-5-2-2 and everything else in full speed......I wish you where somewhere near here so as to borrow it to you for benchies....... :toast:

Yes, we are the last P4 "Dinosauer" The A64 and FX-51 are soon all over in Pifast.

Do you now any Internet-store in europa that can get the new Corsair-twin R 3200c2.. Can't get any in Denmark. can you recommend any Ram that can do the job with FX-51?

Have you seen my new cooling projekt at "Bowmans Shop"

310W -70
200W -80 degree
120W -90
100W -100

:toast:

[mkleingeld]

Ok, not very happy with my new 2.8c (yet) but did a pifast anyway.
Done at 3802mhz 271.5 fsb
mem 5-4 2.2.2.5

[[NH]Woxxman]

Hi guys!

I know this is little OT but I think this is the right place to ask my question.
We are working on a major data base for pifast results and I'm only wondering what version of the program to use. The newest to my knowledge is 4.3 but I remember hearing bad things about the 4.2 version and thought it was worth to check up on.
Were building this result data base from the ground so it would be quite sad if we went for the ”wrong” version of pifast.
Which should we use, the 4.1 or 4.3 version?
And why? :)

[PMM]

Nah you get everyone to submit to my Pifast keep a
standard that way just click download ..extract..
run the Hexus batch file;).......

http://pifast.hexus.net

[mkleingeld]

Ok, starting to see a little bit more performance out of this 2.8c. I hope there is more to come though.

Done at 3838mhz mem 5-4 2.2.2.5

[mkleingeld]

Ok, in danger of becoming boring with posting small aprovements :)

DOne with my pc in front of an open window and about 7 degrees outside temperature and about -15 on the cpu full load.

274.43 x 14 = 3842mhz. mem 439mhz

I wonder what's keeping me back. If the computer fails it just blocks. Is this the dreaded 5-4 isue with the Max 3? Any owners with this mobo that can tell me what happens when the take theirs a bit too far?

[[NH]Woxxman]

Originally posted by PMM
Nah you get everyone to submit to my Pifast keep a
standard that way just click download ..extract..
run the Hexus batch file;).......

http://pifast.hexus.net

:)
Well we are going to use some sort of batch file to get inexperienced users to commit to pifast but first we need to decide what version to use as I said before. :)
Hexus pifast list is one thing that is favourable to the 4.1 version as there are a lot of users that use this version and probably will continue to do so.
Are there any concrete pros or cons with the different versions that you guys could share with me?

[Rys]

Let me know what you guys decide, the Pifast benchy is my baby over at HEXUS, I'm happy to move over to a new version if the concensus is there.

Rys

[[NH]Woxxman]

Sounds good Rys, now let's hope we can get some input from the users also.
C'mon guys, can't you give us some of your thoughts about the different pifast versions? ;)
I have started to see some of you using the 4.3 version and it would be nice to know if there are any problems with the new version.

[hipro5]

He,he,he............Here I'm again........... :D

This is my new bench BUT with HIGH fsb and 3:2 CPU:Ram.........I think it's better this way......... ;) :D

[hipro5]

Here is the way and the fsb I did it........

[hipro5]

.....and with this Memory bandwidth........

[mkleingeld]

Wow, very impressive Hipro5!
What motherboard do you use and what cooling on the nb?

[hipro5]

Originally posted by mkleingeld
Wow, very impressive Hipro5!
What motherboard do you use and what cooling on the nb?

Mobo is ABIT IC7-G with : Vdimm,VTT,Vdd,Vagp,Vpll..... :D
Northbridge cooling is a Thermaltake Tiger heatsink.. ;)

BTW.here's my new one...

[hipro5]

..and MAX benchable fsb is 349MHz for "low" benchies and 344MHz for 3DMark...

[macci]

Your the man Hipro :D

what kind of 3dmark lobby hi scores does that FSB give you?

[hipro5]

Originally posted by macci
Your the man Hipro :D

what kind of 3dmark lobby hi scores does that FSB give you?

You'll see macci.........you'll see................ ;) :D

[Dagalidis]

Hipro ....
Nice work my friend......;)

Btw will be your next Setup based on A64 / A64 FX ??? or you will continue on the Dark Side ??? :D :D