fortron 550-60pln?

[drunkenmaster]

I started a thread ages ago on these, no responses :(

Anyway, does anyone use one, does it have pots inside, i suspect it does. Also, has anyone ever seen a 8 pin to normal 4 pin adaptor. It has no normal p4 style 4 pin atx 2 but a 8 pin only. Its on its own 18amp rail and need a convertor before i could buy one.

[CrashOveride]

Why not just get the 530w ATX one?

[saaya]

just use the 4pin connector from an old psu and solder it to the cables?

it should have pots inside... but im not sure.

[Poki]

You could also depress the little barbs on terminals that catch in the connector and transfer 2 negative and 2 12v lines to a normal 12v 4 pin connector. I've done tons of wire swapping like this on psu's before.

[Hell-Fire]

Have you opened it and looked, or have you purchased it yet?

[saaya]

Originally posted by Hell-Fire
If your PSU still has a warranty sticker, you don't belong here.

http://www.driverheaven.net/images/smilies/smilie.gif

[CrashOveride]

Funny... my Fortron 530w didn't/doesn't have a warrenty sticker at all.

[Siphilon]

Originally posted by CrashOveride
Funny... my Fortron 530w didn't/doesn't have a warrenty sticker at all.

Good! thats one less thing ya gotta remove when ya take the cover off!!!:toast:

[uwackme]

Yes it has pots for 3.3V and 5/12V rails, and fan temp threshold, as well as OVP on 3.3 and 5/12V rails.... 5 pots total.

I wish the Superflower had the 3.3V pot. It is to be used with DFI boards, while the Fortron is used with ABit/Asus because of the need to raise 3.3V rail for Vdimm mods.

[Stelios]

Originally posted by uwackme
Yes it has pots for 3.3V and 5/12V rails, and fan temp threshold, as well as OVP on 3.3 and 5/12V rails.... 5 pots total.

I wish the Superflower had the 3.3V pot. It is to be used with DFI boards, while the Fortron is used with ABit/Asus because of the need to raise 3.3V rail for Vdimm mods.

Are you talking about the 550 ????
Stange coz my 550 has only 2 pots ...