World rekord on Àbit otes fx 5600 u

[ZETT FX]

i spend many days to kicked record Diablo
and i get it
ASUS P4C800 DELUXE|P4 2.6@3.34|2*256 KINGSTON|& OF COURSE MY ABIT
OTES FX 5600 ULTRA 400/800@535/943|
all in aur

voltmod coming soon

www.overclockers.ru

4362

http://service.futuremark.com/compare?2k3=2567569

[althes]

not bad

[zakelwe]

Nice work !

That was probably as difficult as it was me trying to find my way around your forum the other day to post a reply !!!! :)

Good luck with the volt mod, that is a nice gpu speed if not yet modded.

Regards

Andy

[r3b0rN]

Nice work man!

Originally posted by zakelwe
That was probably as difficult as it was me trying to find my way around your forum the other day to post a reply !!!! :) ROFL

[ZETT FX]

not modded not additional coolling
zakelwe -what do you do on Russian forum?and how you register!

ps Russia forever!

[ZETT FX]

interesting-with voltmod i get 4700-4800 or no?

[ZETT FX]

dx 9c add nothing!

[Sphinx]

ZETT FX It added me 20 marks! Nice!

zakelwe and what about you in 03?

[zakelwe]

Originally posted by Sphinx
ZETT FX It added me 20 marks! Nice!

zakelwe and what about you in 03?

My 03 score is pretty low now it seems thanks to these guys :) , I'll have to have another try when my new motherboard and cpu arrive in June.

Dr Jay almost got my 2001 score as well .. maybe he has , I have not checked recently .. everybody gangs up on me :D

Regards

Andy

[DrJay]

Andy,
I've regarded your '01 score as motivation / inspiration,.....but I don't think you are in any danger of me catching that score. I've done everything I can think of...stil 40 to 45 points off. Maybe its time to ditch my d@mn 512k cache A64.:D

[zakelwe]

Originally posted by DrJay
Andy,
I've regarded your '01 score as motivation / inspiration,.....but I don't think you are in any danger of me catching that score. I've done everything I can think of...stil 40 to 45 points off. Maybe its time to ditch my d@mn 512k cache A64.:D

Well that would certainly get the required points if you went 1MB :)

I had a look at my 5600U that has been sitting on the side for a while to see if it needed to put it's battle kit back on, only to find the volt mod had dropped off and the chip looked a bit cracked.

It's 3rd in line behind testing my 5800 and the 6800U when it ever turns up. I'm still awaiting 3700+ to appear on the scene, though the $$ seems a lot.

Regards

Andy

[ZETT FX]

up!

[r3b0rN]

uh... explain ur actions... that wasnt needed, uve already been congratulated, let the thread die.

[zakelwe]

Originally posted by r3b0rN
uh... explain ur actions... that wasnt needed, uve already been congratulated, let the thread die.

Yeah let it die until I up it by beating his score :D

LOL

Regards

Andy

Small print. Note Andy's rash claims for future scores can go down as well as up, take with a pinch of salt

[zakelwe]

Originally posted by r3b0rN
uh... explain ur actions... that wasnt needed, uve already been congratulated, let the thread die.

By the way, has your XT arrived yet ?

Are you going to mod it ?

Regards

Andy

[DrJay]

Thought I would re-use this thread since it deals with 5600Us.....
Just took the #1 spot on the ORB for 5600U overall -----18,267 3dmarks.
http://service.futuremark.com/compare?2k1=7893393 (http://)
Kudos to Zakelwe for holding the top spot for six months.

More to come......
new cpu (1mb l2 cache a64) soon.
new mobo on the way
I believe there is quite a bit left in this gpu. Was able to run lobby test at 555mhz core on ducted air cooling......may try water or pelt/water.

[zakelwe]

Originally posted by DrJay
Thought I would re-use this thread since it deals with 5600Us.....
Just took the #1 spot on the ORB for 5600U overall -----18,267 3dmarks.
http://service.futuremark.com/compare?2k1=7893393 (http://)
Kudos to Zakelwe for holding the top spot for six months.

More to come......
new cpu (1mb l2 cache a64) soon.
new mobo on the way
I believe there is quite a bit left in this gpu. Was able to run lobby test at 555mhz core on ducted air cooling......may try water or pelt/water.

:toast:

I knew you'd get it, it was just to close not to, and with a 512KB cpu as well, even better .

Nice gpu core Mhz, I am awaiting a 6800U at present and then I want to mod my 5800, but after that I'll see if i can catch you up and make it interesting, I expect you to be nearer / over 19k by then though so might be out of reach.

good luck with the new kit.

Regards

Andy

[r3b0rN]

Originally posted by DrJay
Thought I would re-use this thread since it deals with 5600Us.....
Just took the #1 spot on the ORB for 5600U overall -----18,267 3dmarks.
http://service.futuremark.com/compare?2k1=7893393 (http://)
Kudos to Zakelwe for holding the top spot for six months.

More to come......
new cpu (1mb l2 cache a64) soon.
new mobo on the way
I believe there is quite a bit left in this gpu. Was able to run lobby test at 555mhz core on ducted air cooling......may try water or pelt/water. congrats man thats an awesome score for a card with 4 pipes and 128 bit mem, especially considering its a 5600u. :toast:

[DrJay]

Thanks Zakelwe. Yep, I'll be pushing for 19K!:) Hopefully, I'll be able to make it while staying with a socket 754 system. Think I'll see what I can get for an '03 score. I've been hesitant to try as I've been thinking installing DX9 would hose my '01 scores.
Good luck in your benching endeavors as well! Should be sweet benching a 6800U in your new benching palace!!:D

Thanks for the congrats guys!


Jay

[zakelwe]

Originally posted by DrJay
Thanks Zakelwe. Yep, I'll be pushing for 19K!:) Hopefully, I'll be able to make it while staying with a socket 754 system. Think I'll see what I can get for an '03 score. I've been hesitant to try as I've been thinking installing DX9 would hose my '01 scores.
Good luck in your benching endeavors as well! Should be sweet benching a 6800U in your new benching palace!!:D

Thanks for the congrats guys!


Jay


Hi Jay,

I know what you mean about the DX9 / DX8 thing, but I think you have the gpu power not to worry too much. With that gpu speed I think a very nice 03 score will result also. I think a move to 1MB cache would allow you close on 754, what RAM timings did you have for the 280Mhz and what type of memory was it ?

I have had news today that my 6800U is likely to arrive Monday so I am like a little kid again :) Shame the benching Palace still needs electricity ( and no sign of the girls in bikini's ), I'll have to do it in the house for the moment .. oh well.

Regards

Andy

[DrJay]

Andy,

Maybe you could use a heavy duty extension cord as a temp. solution for the palace.
The memory I used for 280mhz was A-data pc4000. Cr@ppy 3-4-4-8 timings though:( . Sandra '04 reports mem bandwidth of 42xx / 42xx, and benchmarks seem to be better that other ram that I have been running at 210mhz 2-2-2-11-10-16 timings. The real problem is my mobo's (Leadtek NF3-150) Vdimm being limited to 2.8v and even that is undervolted to approx. 2.77.
Do you think you will be able to break the top 10 on the ORB for either '01 or '03 with your 6800U???


Jay

[zakelwe]

Originally posted by DrJay
Andy,

Maybe you could use a heavy duty extension cord as a temp. solution for the palace.
The memory I used for 280mhz was A-data pc4000. Cr@ppy 3-4-4-8 timings though:( . Sandra '04 reports mem bandwidth of 42xx / 42xx, and benchmarks seem to be better that other ram that I have been running at 210mhz 2-2-2-11-10-16 timings. The real problem is my mobo's (Leadtek NF3-150) Vdimm being limited to 2.8v and even that is undervolted to approx. 2.77.
Do you think you will be able to break the top 10 on the ORB for either '01 or '03 with your 6800U???


Jay

That memory timing is not tight however it did allow you to run 1:1 . I did some testing earlier this week with pifast to check the difference between 5:4 and 1:1 on AMD64 K8Pro chipset and found that you have to gain 50MHz in FSB speed to get the memory performance back to 1:1 levels, so 250x8 5:4 did the same score as 200x10 1:1. I expected the 250 gain to outweigh the 5:4 loss.


I am getting some Corsair XL Pro memory this weekend and hope to obtain the claimed 2.5-3-3-7 @ 250 1:1 which will better than my current. In fact I am still fine tuning as this Abit has 3.2v for RAM but the VBT seems low, hence a problem. I will let you know if it is good.

Having just looked at the top 10 scores I doubt it, will have to see. This is going to be my gaming card so no mods, my current gaming card, 5800, which is unmodded will have the fright of it's life soon as I have some chilled water and two vmods prepared for it, I am hoping for near the top in both benches, but we shall see.


Regards

Andy

[r3b0rN]

bah youll make 1 of the top spots with it no probs, all the same, good luck :cool: your gonna have fun playing far cry at an ultra high res with that 6800u :D

[zakelwe]

Originally posted by r3b0rN
bah youll make 1 of the top spots with it no probs, all the same, good luck :cool: your gonna have fun playing far cry at an ultra high res with that 6800u :D

Thanks, if only that was true, the wheels have just come off my wagon, or rather the wings have come off my dragothic dragon, I shall have to ask for help I think.

Regards

Andy

[ZETT FX]

03??

i am first

voltmod on next week!

[ZETT FX]

i am in Team MXS ModLabs/XtremeSystems

where is me to kick atlon 64
i have p42.6@3.34 only))

[DrJay]

Its prolly the different drivers. I have been hesitant to try the 53.30 dets because as I understand it, they are for quadro cards and can cause problems for non-quadros??

[r3b0rN]

if ur talking about the 53.03's - i get my best results with them in 3D03

[DrJay]

I'm currently using the 53.03's. Check out the first page on the orb for 5600u. ZETT FX is far and away ahead of the nearest scores on a P4 3.3 - 3.4ghz. I can only assume its the 53.30 drivers. Never tried them though. Hard to find,....had to run a google search. Guru3d might have them. I think there is a modded version for non-quadro cards.

Jay

[zakelwe]

Originally posted by DrJay
I'm currently using the 53.03's. Check out the first page on the orb for 5600u. ZETT FX is far and away ahead of the nearest scores on a P4 3.3 - 3.4ghz. I can only assume its the 53.30 drivers. Never tried them though. Hard to find,....had to run a google search. Guru3d might have them. I think there is a modded version for non-quadro cards.

Jay

Nice work :toast: No volt mod either yet, mine clocks less than yours with the volt mod :D LOL . Good luck

The Corsair XL Pro memory was poor on the Abit Kv8Pro with a max overclock at 2.5-3-3-7 of less than 230Mhz :( So that is no good.

I am getting rid of this Abit KV8 Pro board and going back to the old Kv8 with the non Pro chipset hoping it gives me back my VTT voltage! I'll live with the lack of fixed PCI bus if it does.

On another bad note my CoolFX 6800 is still not delivered, promsed last Monday so I have cancelled it and have ordered the Extreme Golden Sample 2600 for August. In the meantime with the money saved I might try a cheap video card to bench mod to keep me interested.

Also my dragon is slowly getting better, almost there.

Regards

Andy

I am also slowly getting to

[r3b0rN]

Originally posted by zakelwe
Also my dragon is slowly getting better, almost there.

Regards

Andy

I am also slowly getting to What are u doing to improve your strangely low score? also, what do u mean by "i am also slowly getting to" im thinking unfinished sentence :D

, James.

[zakelwe]

Originally posted by r3b0rN
What are u doing to improve your strangely low score? also, what do u mean by "i am also slowly getting to" im thinking unfinished sentence :D

, James.

Well I got it better on my P4 machine after it was low on that as well, so I think it is the Rivatuner settings now as i defaulted them all. However it might be something else, got to test it tonight. Slowly getting better in that it is faster now, but on the wrong motherboard :)

I wish I could say I am slowly getting the 5800 #1 but, alas not yet :D

This little 5600U thread makes a nice change to all those big X800 and 6800 threads .. this one only has 4 pipes ;)

Regards

Andy

[ZETT FX]

)))))))))))

i download whql 53.03 and i get....what do you think???!!!
result èóååóê 4362

i put on orb toomorrow

[ZETT FX]

better

[DrJay]

Gentlemen, the bar has been raised by another 131pts. on '01!
http://service.futuremark.com/compare?2k1=7910608 (http://)

:hehe:
Gave up on '03 though (for now anyway). Can't seem to catch a p4 @ 3.34ghz with my a64 at 2.52ghz and mem at 280mhz!?!.

[r3b0rN]

congrats zett for 03 and drjay for 01... drjay, how the heck dosnt ur a64 beat a p4 when the fsb is so high :confused:

edit: whoops, just remembered how much better p4's are in 03.

[DrJay]

P4, huh? I've got a 2.4c and pressie 2.4a, both will do 3.6 on air maybe I'll give '03 another run. What p4 will score higher at 3.6ghz???

Jay

[r3b0rN]

id imagine clock for clock the prescott would be better, but id double check with a p4 guru ;)

[DrJay]

Okay. Tried the 5600u with a p4 2.4c at 3.6ghz(300x12). 4/5 mem ratio, 865pe mobo, same 53.03 driver. It was so bad, I stopped game test 3 right as it started,....wasn't even worth finishing. Of the 2 tests completed, I lost 20 fps on test 1 and approx. 10 fps on test 2. Either something is wrong with my system, or the p4 isn't really better at '03 than A64.

[zakelwe]

Originally posted by DrJay
Okay. Tried the 5600u with a p4 2.4c at 3.6ghz(300x12). 4/5 mem ratio, 865pe mobo, same 53.03 driver. It was so bad, I stopped game test 3 right as it started,....wasn't even worth finishing. Of the 2 tests completed, I lost 20 fps on test 1 and approx. 10 fps on test 2. Either something is wrong with my system, or the p4 isn't really better at '03 than A64.

Congrats on the higher scoring ! :)

In 03 you should not lose anything on GT2 at all with changing the cpu as it is video card capped on a 5600U, so that is strange.

Something up I think.

Regards

Andy

[ZETT FX]

http://service.futuremark.com/compare?2k3=2665760

4408 on 540/945& 53.03 whql and p4 3.34!

studys sons!

[DrJay]

Thread resurrected again! :hehe:

I've been trying '03 with my 5600u on a p4 system. Scored 4,542 but couldn't publish it as stupid 3dmark detects my cpu as ' 0 mhz unknown'. Still working on it though.....:cord:

[DrJay]

Oh yeah, forgot. The cpu is a 2.4c @ 3.6 ghz on a 865pe mobo. Anyone have any clues as to why 3dmark can't detect that? Ant help would be appreciated.

Thanks,

Jay

[r3b0rN]

latest chipset drivers installed? are u choosing not to publish it or is it forcing u not to? if ur choosing to, publish it and include the cpu details in the description.

[DrJay]

r3bOrN: It won't let me publish my scores. You mentioned latest chipset drivers....... come to think of it, this problem seemed to have started after I updated them to the latest. Hmmmmm. Guess I'll go back to the previous.....
Thanks for the idea.

[ZETT FX]

hyperthreading on?
if off switch on!


Musiaka voltmoded me my 5600
amd i give 600/1000!
results coming soon

[ZETT FX]

3.34 vs 3.6
260 Mhz!)))

[Sphinx]

ZETT FX Waiting for result! Hope that they'll be awesome for this type of cards!

r3b0rN BTW nice woman! Adriana Lima?

[r3b0rN]

yep :D

[zakelwe]

Originally posted by ZETT FX
hyperthreading on?
if off switch on!


Musiaka voltmoded me my 5600
amd i give 600/1000!
results coming soon

600/1000 .. maybe the bog 20k falling soon ?:cool:

Good luck Jay !

Regards

Andy

[Gothic]

pretty nice job... hope u get 5200+ with all volt and cooling mods!

[ZETT FX]

Jay

you cheater!

non whql non fm
53.06!
where do you get them?!!!

[zakelwe]

Originally posted by ZETT FX
Jay

you cheater!

non whql non fm
53.06!
where do you get them?!!!

I've been drinking heavily but this post makes no sense wahtsoever.

Are you calling yourself a cheater ? I think you need to back those words up or you will have to call yourself out and have a single person duel !

Eh ? :confused:

Regards

Andy

[ZETT FX]

what 53.06?!

setup 53.03 to get truth

[DrJay]

Well put Andy! Firstly, I thought I was using 53.03 until early last week, when I noticed I had actually installed the 53.06 drivers. I didn't even realize there were 53.06 drivers. I have since rolled back to 53.03 and there is no difference in performance. I believe I downloaded those drivers from either Nvidia or Guru3d,......have at them. However, I think what Andy was saying is that as far as Futuremark is concerned, if 53.06 is cheating, then so is 53.03.

Jay

[DrJay]

Just to put the issue ( even though there really isn't one) to rest, I ran '03 again with the 53.03 drivers. My score improved by 21 pts. with no change to the hardware.
http://service.futuremark.com/compare?2k3=2730651 (http://)
Hope that works.....

Anyway, the cpu is normally stable above 3.6ghz but lately, it's been having issues with warmer summer temps. Time for water cooling. I still have not volt modded the 5600 yet.

[DrJay]

Oh, I forgot to mention. I left my old score on the ORB. If anyone is interested, you can compare 53.03 to 53.06. They are #2 and #3 on 5600U page.
Not much difference really.

Jay

[ZETT FX]

strainth why in 1 test you win.....
200 mgz cpu....

[DrJay]

And your point is what??? I thought you were all concerned with the drivers!?!?
One other thing Zett; it was very inappropriate for you to call me a cheater.....


Jay

[ZETT FX]

well wellyou not cheater!

[DrJay]

new #1 for 5600U! Just barely though...... 4,571 3dmarks.

This never seems to work for me but I'll try to put the link here:
http://service.futuremark.com/compare?2k3=2752643 (http://) :hehe:

[zakelwe]

Golly I must have been drunk that day, I thought ZETT FX was Jay .. :rolleyes:

There's no cheating going on here, you can use whatever drivers you want, whichever give the best score, as all users are in the same catagory as they have the same card and therefore they can use the same drivers.

Nice score Jay, I am still waiting for my shed to have electricity to be put out to it so i can start benching again, also waiting for some good memory.

Regards

Andy

[DrJay]

Thanks Andy. I think that once your 3DMark benching palace has power we may see some top scores fall. Did you decide to get a 6800??
The things I'm currently working on are:
1. volt modding an IC7 mobo as my current benching is limited by a 865pe without PAT.
2. watercooling for a A64 rig I've been using. Once I get that ready, I'll volt-mod my 5600U and make a run for 20k.


Jay

[ZETT FX]

1 mark

hehehe

i get nore than 4600 at next week
you win in first test only...

[DrJay]

Hey Zett: Over 4600? Really?? You mean, like.......
this? http://service.futuremark.com/compare?2k3=2754325 (http://) :D

You're behind by about 11 fps in GT1!
We're tied in GT3
You're lead in GT2 and GT4 is a combined total of 1.1fps

Just thought I'd mention those figures as you like to point out that you are ahead every time you post....

[DrJay]

Okay, sorry. The link didn't work again. The score is 4,602.

[ZETT FX]

in first test you win with 300*12
i have 257*13

win in 4 test!

[DrJay]

I don't quite get your point. My score is higher because my computer is faster?!? This thread has run it's course (more than onceI might add) and I think I'm done with it, unless someone has something intelligent to post.....

[zakelwe]

Can I see a nice little rivalry starting here :D

Reminds me of mine and walldows .. walldow always beating me though ..heh.

Regards

Andy