View Full Version : LanParty B + Mach1 ?
Hi, I have the Lanparty B mobo and I want to buy a Mach1, anyone has this combo running ? I'm asking because I just saw there's not much space around the cpu socket.
BTW what do you think of 425euro inc. shipping for a mach1 unit inc. sealstring and xp-kit ?
WannaOC
05-20-2004, 11:02 AM
I had one on my Infinity before the MachI died and it fits fine. Its a tight fit but since its the same board I wouldn't see why yours wouldn't.
Why did it die and don't you repair it ? :eek:
IamAnoobieCheez
05-20-2004, 11:12 AM
yea it should fit fine.. If i remember correctly, SAE had his Mach I on his Infinity board.. now he's got Mach II...
Man I can't await to get this thing :))))
Noobie 999 posts ;)
My Tbred did 2,6ghz on good water, what you think it'll do under prommy (r134a/r507)
IamAnoobieCheez
05-20-2004, 11:28 AM
Originally posted by sai
Man I can't await to get this thing :))))
Noobie 999 posts ;)
My Tbred did 2,6ghz on good water, what you think it'll do under prommy (r134a/r507)
Is that with a chilled water or on plain water?
IamAnoobieCheez
05-20-2004, 11:36 AM
You might be able to get to somewhere in the 2.85~ 2.95ghz range stable.. with your DFI board. :)
niiiiiice I wanna have it now :D :toast:
Endre
05-20-2004, 12:42 PM
Me too!! :D
I'm getting a Mach 1 with 2 CPU kits for 275€ brought home to me. :D (It has a minor fault though.)
I can't wait. :)
Fits. No probs. All proms are the same... btw. downwards-compatible ;)
You just have to keep an eye on the screw/standoff the most upper left side... Leave the standoff out, otherwise you could not fit the backplate there. It's in the way. And try to not bend the hose too much as the mach1 are really weak directly at the head's joint and they easily break because of the mis-seated socket on the LP/Infinicky... The mach2's hose is much more flexible though.
sai, I wish you best luck with it. You'll enjoy it, sorry I could not give you mine. Hope it gets repaired soon enough for me.
HawainPanda
05-20-2004, 09:15 PM
im sure u could touch around 3ghz easily...have fun!
Prokopek
05-20-2004, 09:27 PM
Originally posted by Endre
Me too!! :D
I'm getting a Mach 1 with 2 CPU kits for 275€ brought home to me. :D (It has a minor fault though.)
I can't wait. :)
wow only for 275? where?
Originally posted by SAE
Fits. No probs. All proms are the same... btw. downwards-compatible ;)
You just have to keep an eye on the screw/standoff the most upper left side... Leave the standoff out, otherwise you could not fit the backplate there. It's in the way. And try to not bend the hose too much as the mach1 are really weak directly at the head's joint and they easily break because of the mis-seated socket on the LP/Infinicky... The mach2's hose is much more flexible though.
sai, I wish you best luck with it. You'll enjoy it, sorry I could not give you mine. Hope it gets repaired soon enough for me.
Hm you mean because of the resistors around the upper left mounting hole ? I already noticed them .. shame on you DFI ! Hm why should I bend it more then needed or do you mean because of the 90° degrees rotated cpu socket ?
Originally posted by sai
Hm you mean because of the resistors around the upper left mounting hole ? I already noticed them .. shame on you DFI ! Hm why should I bend it more then needed or do you mean because of the 90° degrees rotated cpu socket ?
No. I did not mean the resistors but the standoff you screw into the mobo tray. That's the one to let off. Cause the backplate of the prom would not be aligned well according to the upper mobo bracket of the prom...
The hose should be bend as less as possible. The socket position on dfi boards is definately worse than on abits nf-7! That's why I said not to bend the hose too much (socket is moved more to the right... and there's a slight twist in the hose when attaching it to the cpu.
Be careful then :thumbsup:
Hm I already see the hose breaking .. omg :rolleyes:
Originally posted by sai
Hm I already see the hose breaking .. omg :rolleyes:
No. It does not break immediately then, but over time (like for me ;) )... you would first notice a drop in evap temps, then later off it would suddenly rise dramatically and fall again. (for me it was a process of 2 or 3 weeks - the leaking I mean)
Then you definately know what's going on. 'Just be careful and you don't have to bother with these problems' IS what I wanted to say :D
Just be careful... so that nothing can break your happiness with it ;)
Originally posted by SAE
No. It does not break immediately then, but over time (like for me ;) )... you would first notice a drop in evap temps, then later off it would suddenly rise dramatically and fall again. (for me it was a process of 2 or 3 weeks - the leaking I mean)
Then you definately know what's going on. 'Just be careful and you don't have to bother with these problems' IS what I wanted to say :D
Just be careful... so that nothing can break your happiness with it ;)
Ah then I'm satisified ... takes 3 weeks that's ok :p:
Originally posted by sai
Ah then I'm satisified ... takes 3 weeks that's ok :p:
Hehehehe. Yeah, then you'll have fun at least for 3 weeks :lol: ;)
I never liked hoses anyway :shakes:
Endre
05-21-2004, 04:32 AM
Originally posted by Prokopek
wow only for 275? where?
2nd hand ;)
SAE does the Prommy start-automatic work with the Infinity/LP B ?
Originally posted by sai
SAE does the Prommy start-automatic work with the Infinity/LP B ?
Yupp. Works fine :D
No probs here. Neither with the mach1 nor with the mach2 gt.
Nice, I already thought I had to jumpstart and :banana: :banana: :banana: :banana: ...
btw fast reply :D
Originally posted by sai
Nice, I already thought I had to jumpstart and :banana: :banana: :banana: :banana: ...
btw fast reply :D
Hehe. I am always in my email folder :D
And xtreme notification works xtremely fast :D
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.