PDA

View Full Version : OCZ pcXX EB vs EL?


o27
05-18-2004, 04:52 AM
Heya.
I´ve been reading up on these "EB" threads the past few days and I must admit I´m very tempeted by them.
At the moment I have Mushkin special 2-2-2 that can bench at 240fsb 1:1 with 2.8v!! Pretty amazing!
My problem is that I need one gig of ram.
My question is what´s the diff between "ordinarey" EL optimized kit from OCZ and the new EB stuff?
I can see that the price diff. is almost 90$!
So please enlighten me:p:

bias_hjorth
05-18-2004, 04:55 AM
would go for the EB stuff.. seems to pack out some punches.. although I dont know how the onb. memory controller would act with these different chips..

o27
05-18-2004, 05:13 AM
takker bias:) It´s just that the price diff. is pretty stiff i believe but from what I´m hearing the way to go is EB! right?
A second qustion - is the EB3200 so much lousier than the EB3700? it seems like everybodies is aiming for the 3700EB?!

saaya
05-18-2004, 07:07 AM
eb > el

eb runs 3-2-2 wich is almost as fast as 2-2-2 because of some tweaks

el runs 2-3-2 afaik. i think the eb is faster than the el at the same mhz

o27
05-18-2004, 07:40 AM
right-on seems i´ve overlooked the diff in Trc - guess i´ll try out 1gb of pc3200EB - hopefully they´ll give me around 240-250 1:1 - right?

Spec3
05-18-2004, 07:43 AM
You should go with the pc3500EB if your looking for 250Mhz

o27
05-18-2004, 09:08 AM
yeah well it´s cause i can get the 3200EB for at reasonable price

DEVIL_DK
05-25-2004, 07:15 AM
Hi all
first sorry for the bad english

i just got some Mushkin 3200 Special 2-2-2 Dual Channel 2x512

1 of the bloks had a defekt.

Now i will send them back and get other ram
my mothermoard is the asus K8V Deluxe my cpu is af amd 64 3200+

will the bedst be to get the
1024MB kit DDR PC-3500 Platinum EB - OCZ

or a new set of
1Gb kit DDR PC-3200 Special 2-2-2 Dual Channel - Mushkin

p4z1f1st
05-25-2004, 07:20 AM
Originally posted by Spec3
You should go with the pc3500EB if your looking for 250Mhz

y not the 3700EB ?

or do you mean, they are good for people who want >250MHz and he would save some money by buying 3500EB ?

Evil_Spork
05-25-2004, 07:54 AM
price.. the 3700 got VERY expensive.

i got 512 for 164, then a week later it was over 180 for that same 2*256 kit. $195 for 2*256 is a little high. and its about double that for a gig.... nearly 400? neg.

o27
05-25-2004, 08:25 AM
yeah ram prices have sky-rocket lately - unfortunately!!

xsky
05-25-2004, 10:05 AM
i just received my PC 3500 Dual Kit 1024MB today for P4C800E

250MHz 3-2-2-5-4 prime stable with only 3,0V !

More seems to be unlikely because of memory controller

Geforce4ti4200
05-25-2004, 11:59 AM
another thing I want to clear is, ras to cas on the EB ram doesnt matter? because I was sure as heck that it does matter. pc3700eb does about 250fsb average but 3-2-3-6 and the 3 in ras-cas hurts performance bad over it being a 2, is that correct?

enzoR
05-25-2004, 12:05 PM
yes but CAS doesnt matter

eva2000
05-25-2004, 12:05 PM
personally i'd go for the PC3700EB for potential to go >250mhz 2.5-2-2-6/8 to 3-2-2-8

Crankster
05-25-2004, 12:13 PM
If you look in local forums you get BH-5 cheaper than PC3700 EB

Geforce4ti4200
05-25-2004, 12:15 PM
thats what I told him. he thinks none of the timings matter, I told him it being cas3 doesnt matter but the ras-cas of 3 hurts it bad but he keeps saying it dont matter! sandra shows little bandwith difference but youll lose big performance in 3dmark and games though

Spec3
05-25-2004, 12:18 PM
The OCZ EB will run with trcd of 2 on 95%+ of the sticks so what are you complaining about?