KODE
05-08-2004, 05:32 PM
Hi fellas,
I just fried my brand new NF7-S 2.0 that I receiver from RMA. I was upping the DDR voltage (VDIMM mod) to 3.05 and when I pressed the power button the mobo died. I was extremely careful when I was turning the POT, by this I mean: PC shutted down and 1/4 turns each time. This was exactly what hapened with the previous NF7-S, besides I was attempting 3.4V DDR and 3.3 Rail was at 3.6V or something. I´m starting to think there´s something wrong with my PSU, it is a TRONI 450W that I modded the 5/12V (they act togheter) and the 3.3V rail. The curious thing here is that if I turn on the PSU shorting the green and black wire the multimeter reads 5V and 9.98V on the 5 and +12V rail. To set the +12V rail to 12V I have to set the 5V rail to 5.7V!!! WTF is going on here fellas?
Regards,
KODE.
I just fried my brand new NF7-S 2.0 that I receiver from RMA. I was upping the DDR voltage (VDIMM mod) to 3.05 and when I pressed the power button the mobo died. I was extremely careful when I was turning the POT, by this I mean: PC shutted down and 1/4 turns each time. This was exactly what hapened with the previous NF7-S, besides I was attempting 3.4V DDR and 3.3 Rail was at 3.6V or something. I´m starting to think there´s something wrong with my PSU, it is a TRONI 450W that I modded the 5/12V (they act togheter) and the 3.3V rail. The curious thing here is that if I turn on the PSU shorting the green and black wire the multimeter reads 5V and 9.98V on the 5 and +12V rail. To set the +12V rail to 12V I have to set the 5V rail to 5.7V!!! WTF is going on here fellas?
Regards,
KODE.