Water Cooled Case Gallery

[skaktuss]

it would be great to get ww with 432 pins, just like mp-05 pro le!

[kiwi]

Cool, where did you get that rad?

I know a guy who is selling custom made wc kits, no idea where he got it :)

[PRJ]

So here's my setup...

DFI Lanparty UT SLI-D ( 406 BTA Bios )
AMD 4800+ X2 Toledo @ 2 x 2.9 GHz
2 x 1024 MB XMS 4400 Pro
2 x BFG 7900GTX OC 512 MB ( SLI )
2 x 36 GB Western Digital Raptor
Tagan TG900 Turbojet 900 Watt PSU
Creative X-Fi 64mb X-Ram "FATAL1TY"
Alphacool watercooling

[mikenam]

I dunno, i like the WW, its still a great block... just shorten the double tubing between the WW and Y, and you should be able to go with tube instead of the 90 degree.


the angle of the y makes it so that i can't make it short with out a harsh bend. but its not needed any more since i just got a storm. got it pretty cheap on ebay. its rev 1 though.

[Pied]

http://i20.photobucket.com/albums/b244/bart122580/wc%20aurora/IMG_1223.jpg

http://i20.photobucket.com/albums/b244/bart122580/wc%20aurora/c84373d2.jpg

http://i20.photobucket.com/albums/b244/bart122580/wc%20aurora/382c2c75.jpg

Going to change the Bip to PA120.1 next month, bill is too high right now :).

[Staucher]

http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-4-thumb.jpg (http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-4.jpg) http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-3-thumb.jpg (http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-3.jpg) http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-7-thumb.jpg (http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-7.jpg) http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-9-thumb.jpg (http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-9.jpg) http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-5-thumb.jpg (http://www.forumdeluxx.de/gallery/data/3553/39511LianLiPC61-5.jpg)

[el rolio]

uhm, wow. nice modders mesh there. oh and everytime i see a nice grill on the top of the case im jealous i cant use one sinnce my rad is external. booooo!

[BlueAqua]

http://img.photobucket.com/albums/v297/BlueAqua/IMG_0291.jpg

[bandit788]

47452

47453

47454

47455

47456

[ReD.SkY]

heres one more grill for ya :P

http://img164.imageshack.us/img164/4671/computerpics0076nn.jpg
http://img88.imageshack.us/img88/958/computerpics0033cu.jpg
http://img240.imageshack.us/img240/8159/computerpics0050hj.jpg

[Mankz_91]

not finished, as there is no hardware installed in this piceey, and no bay res or EK 7900 Waterblock.

http://i49.photobucket.com/albums/f266/Mankz_91/5.jpg

And during primary leak test.

http://i49.photobucket.com/albums/f266/Mankz_91/5eadc80a.jpg

[el rolio]

heres one more grill for ya :P

KTHX! :D

[Hystrix^]

This is my case
http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT00013.jpg
Maybe you noticed the paint allready, but her you get a close-up

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT0004.jpg

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT0009.jpg

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT00014.jpg

In Europe/Belgium some cars have this paint, but I think it's more popular in the US :woot:.

Now a close up on the H20 setup with UV-blue fluid additive;)

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT0007.jpg

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT0003.jpg

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT0005.jpg

The paint is called Chromalusion, but it's very expensive :slapass:, but the effect is great.
another time

http://i49.photobucket.com/albums/f260/hysttrix/H2O%20cooling/PICT00015.jpg

Enjoy,

[SaFrOuT]

why w/cing ur vga and not the cpu ?

btw it is a very very cool colour indeed

[Amplified]

Here is my new setup - tada!

http://img340.imageshack.us/img340/4671/p10100212lm.jpg
http://img340.imageshack.us/img340/1800/p10100189td.jpg

[Brandon_Tyler]

... Wheres the external parts? pump, rad n such?
- Brandon

[JoeBar]

Very nice! :up:

[Amplified]

All in the old DEC Alpha server case below ;). It is my "secret weapon" :D
I'll post pics of the enclosure in a bit.

[daven1986]

here is my first loop, thanks to everyone on here that helped with it

http://img53.imageshack.us/img53/6360/img13787zk.jpg (http://imageshack.us)

http://img53.imageshack.us/img53/1271/img13807me.jpg (http://imageshack.us)

thanks

daven

[creidiki]

Maze 4 and 6002?

Kicking it old-skool!

*attempts hip-hop pose and fails*

[daven1986]

yup :) gives me good temps (gpu says 49 degrees but that is wrong cos it has been sticking at 49 degrees since stock cooler, zalman and now water!!) cpu is about 5 degrees above ambient with rad fans at 7v :)

daven

[Shakermaker]

Short update of my rig:

http://home.arcor.de/skywalker_oasis/Kiste7.jpg

http://home.arcor.de/skywalker_oasis/Kiste8.jpg

http://home.arcor.de/skywalker_oasis/Kiste9.jpg

http://home.arcor.de/skywalker_oasis/Kiste10.jpg

[[KM]Sven]

This is my watercooling rig.
CPU Cooler selfmade (Copper/Stainless Steel)
Mainboard Cooler selfmade (Copper/Stainless Steel)
GPU Cooler: EK waterblock
Case: selfmade (Alu/Stainless Steel) [not finished yet]

http://img271.imageshack.us/img271/120/bild291057yo.jpg
http://img287.imageshack.us/img287/8526/bild290975kr.jpg
http://img257.echo.cx/img257/1788/bild0292yu.jpg

older pic:
http://img168.imageshack.us/img168/5775/bild290813uf.jpg


what do you think?

[creidiki]

Thats a big case :o

[Shakermaker]

Yeah the case is really big. I saw it already in some german hardware-forums.

[Hystrix^]

why w/cing ur vga and not the cpu ?

btw it is a very very cool colour indeed
Because I ordered a phasechange

[eXa]

wow i liked that case! nice

[Tepabajo]

Had fun. Didn't bring temps down much at idle but made a hugh difference under load. Now I can play FarCry at the Very High video settings available and the card temp never goes over 42c, where as before the settings were at High and I would hit over 70c. I'm gonna replace all the worm drive clamps with the same black plastic reusable ones that came with the water blocks, they are pretty sturdy. Very pleased with the performance of my choice of components: CPU WB - Swiftech Storm, GPU WB Swift MCW60, Pump-Swiftech MCP 655, Radiator-Thermochill PA120.3 w Panaflo U1 Ultra Performance fans x 3.
Benchmarks so far:
Item Idle Load
CPU 40c 49c Prime95
GPU 35c 42c FarCry

[JoeBar]

Man that's BIG! :eek2:

[vexvegaz]

heres mine
http://i81.photobucket.com/albums/j213/vexvegaz/mine.gif

[SaFrOuT]

i think u need to update ur sig vexvegas

[vexvegaz]

i think u need to update ur sig vexvegas


lol oops..done

[Visioneer]

My newest project (http://forums.firingsquad.com/firingsquad/board/message?board.id=hardware&thread.id=82786)

Sry but I dont want to post all pics twice

[Hystrix^]

Nice:clap:

[B$TIStalin]

My Liquid cooled LinaLI PC70 :wave:

dark:
http://img54.imageshack.us/img54/3179/case19ju.jpg

light:
http://img87.imageshack.us/img87/9777/case22ie.jpg

front:
http://img87.imageshack.us/img87/4029/case33or.jpg

[ludeboy12]

whats the point in having two floppy drives??

[k0nsl]

Maybe he's raiding them :hrhr: :hrhr:

-k0nsl

whats the point in having two floppy drives??

[B$TIStalin]

one is in the ass and i´m too lacy to change it :D

[gianni-gt]

by night...
http://www.2wire.ch/ripping/bg/watercool_forumdeluxx/PICT0116.jpg

http://www.2wire.ch/ripping/bg/watercool_forumdeluxx/PICT0124.jpg

http://www.2wire.ch/ripping/bg/watercool_forumdeluxx/PICT0130.jpg

http://www.2wire.ch/ripping/bg/watercool_forumdeluxx/PICT0192.jpg


for a hot summer... but realy loud and uncool....
http://www.2wire.ch/ripping/bg/watercool_forumdeluxx/reserator_cool2_klein.jpg

new idea! openair with 3x120mm YS-Tech Fans @ 4000rpm
http://octs.ripping.org/nexxxos1.jpg

http://octs.ripping.org/radi-montage2.jpg

http://octs.ripping.org/radi-openair_klein.jpg

realy cool...
http://octs.ripping.org/wassertemp15.3.jpg

[eXa]

lol @ the reserator!

edit: if you take a tube that the reserator just fit in, and put a sanyo denki 120x38mm fan on topp sucking air trough the reserator. that would cool it enough!

still loud but very effective, and much simplier!

[ReD.SkY]

ROFL (no offence)

you covered that reserator like no other ...

[mindwreck]

that triple radiator cleaned things up a lot. might want to shorten the tubing though. its just killer your flow even more

[Vice]

My cruddy mid-tower case with air cooling
http://img.photobucket.com/albums/v603/MrMage/P5120842.jpg
Swiftech Storm Rev 2 Cpu Block
http://img.photobucket.com/albums/v603/MrMage/P5170875.jpg
Maze 4 Gpu Block
http://img.photobucket.com/albums/v603/MrMage/P5170879.jpg
Maze 4 after being cleaned with ketchup
http://img.photobucket.com/albums/v603/MrMage/P5210904.jpg
Storm after being cleaned with ketchup
http://img.photobucket.com/albums/v603/MrMage/P5210919.jpg
Can these really win the battle against heat?...ofcourse !
http://img.photobucket.com/albums/v603/MrMage/P5160861.jpg
My Trip Radiator..not exactly straight...dont even know how it got that way O_o
http://img.photobucket.com/albums/v603/MrMage/P5290944.jpg

Additional Comment:
Case w/ water
http://img.photobucket.com/albums/v603/MrMage/P5290942.jpg
Case w/ uv cathodes
http://img.photobucket.com/albums/v603/MrMage/P5290941.jpg
I also hit this little problem which caused for me to wait another week to set everything up...
http://img.photobucket.com/albums/v603/MrMage/P5270938.jpg

/Cpu/ Intel P4 3.06 @ 3.7
/Mobo/ Abit IC7-G
/Gpu/ Sapphire x800 Pro 475/450(900) @ 571/613(1226)
/Ram/ Corsair XMS 2gb's ddr400 2-3-3-6
Cooled via:
/Radiator/ BIPIII
/Cpu/ Swiftech Storm Rev 2
/Gpu/ Danger Den Maze 4 Low-Profile Acetal
/Pump/ Danger Den D-5

[Zeus]

Ouch, that barb!! :(

You're very lucky you could get the threaded part out.
How did that happen?

[Vice]

It would seem I have a problem with over tightening things O_o

[JoeBar]

Seems like... :)

[Shakermaker]

The Storm is just awesome. Very sad that it is impossible to get in europe.

[creidiki]

Plenty possible, order from over-clock.com in the UK.

[Shakermaker]

Thanks a lot creidiki !
I´m going to order it soon.

[MaXThReAT]

Well I finally got around to taking some pics of the new "RiG". First water setup I've done. Performs pretty good so far. All black drives. Custom 80mm blowhole and fillport, I wish I would have got some better photos of the two and the custom MaXThReAT LED name plate. Two black lights on the bottom, they heat up the case more than I thought. I keep en off unless I'm showing off.
http://img.photobucket.com/albums/v684/MaXThREaT/DSC00687.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/DSC00688.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/DSC00691.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/DSC00693.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/DSC00694.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/case01.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/blowhole.jpg
http://img.photobucket.com/albums/v684/MaXThREaT/Picture003.jpg

And my old setup R.I.P. She served well.
http://img.photobucket.com/albums/v684/MaXThREaT/DSCN4415.jpg

[Kano]

Why does no one have died water? Blue UV FTW!

[dnottis]

Why does no one have died water? Blue UV FTW!


cause it plugs the blocks, easier to use UV tubing :)

[Kayin]

http://img.photobucket.com/albums/v310/KayinStorm/Picture025.jpg

My old Lian-Li, currently saving to redo it.

RBX w/custom plate, Acetal Maze4 GPU, Danner Mag5, BIX w/panaflo L1A controlled by hacked BIOS, ran almost silent 90% of the time, with a decent overclock...

http://img.photobucket.com/albums/v310/KayinStorm/8x325.jpg

Twas a decent rig...

[JME F1delity]

http://img67.imageshack.us/img67/55/dsc020923ka.jpg

http://img163.imageshack.us/img163/8423/inside2hy.jpg

http://jmefidelity.squarespace.com/display/ShowPicture?moduleId=346732&galleryId=29935&pictureId=368123&originalSize=true

http://img47.imageshack.us/img47/2026/rearradiatorsmall4kt.jpg

Detail shots:

http://img226.imageshack.us/img226/8232/fandetailsmall5ir.jpg

http://img218.imageshack.us/img218/5695/custom80small7ty.jpg

http://img47.imageshack.us/img47/6088/nicefinishsmall9ei.jpg

http://img47.imageshack.us/img47/5197/wormdrivefittingssmall0ah.jpg

Check out the worklog here (http://jmefidelity.squarespace.com/jmebox)

Let me know what you think :)

Benchies:
http://img102.imageshack.us/img102/9851/superpi1m8nf.jpg

Since these pics ive added Delta fans on top and a Zalman VF900 GPU cooler :)

[creidiki]

condenser-style radiator :( :slap: :stick: :slapass: :nono:

[nettwerk2006]

My setup.

I wanted to get a pair of those SHE 3 Blade delta fans, but can't find them in stock anywhere. Everything is dead silent, and performing as well as It can since this motherboard has issues overclocking any further due to chipset limitation.

[SaFrOuT]

is running the 200watt psu only for a couple of fans and the pump won't blow it ?

[JoeBar]

condenser-style radiator :( :slap: :stick: :slapass: :nono:
It reminds me of Tt's rads... :sick:

[yngndrw]

Currently a rackmount case, untill I get a Lian-Li PC-71 and Phase on my CPU.

http://yngndrw.hostilezone.net/Computer/Computer%20Outside.jpg
http://yngndrw.hostilezone.net/Computer/Computer%20Inside.jpg

[krueml]

Some shots of my rig :)

http://www.4eweb.de/pc/yellowmaster/59.jpg

http://www.4eweb.de/pc/yellowmaster/60.jpg

http://www.4eweb.de/pc/yellowmaster/61.jpg

http://www.4eweb.de/pc/yellowmaster/62.jpg

http://www.4eweb.de/pc/yellowmaster/64.jpg

http://www.4eweb.de/pc/yellowmaster/65.jpg

[L'enFer]

JME F1delity, beautiful case. do u use 2 pumps? or one of that is reservoir?

[geep®]

WC update, testing Swiftech parts:

http://img337.imageshack.us/img337/5779/44ug.th.jpg (http://img337.imageshack.us/my.php?image=44ug.jpg)
http://img310.imageshack.us/img310/3590/84vj.th.jpg (http://img310.imageshack.us/my.php?image=84vj.jpg)
http://img266.imageshack.us/img266/2623/98yd.th.jpg (http://img266.imageshack.us/my.php?image=98yd.jpg)
http://img441.imageshack.us/img441/1585/119vu.th.jpg (http://img441.imageshack.us/my.php?image=119vu.jpg)
http://img266.imageshack.us/img266/2055/123ni.th.jpg (http://img266.imageshack.us/my.php?image=123ni.jpg)

:toast:

[JoeBar]

Krueml. What vga wb is this?

[creidiki]

Looks like an innovatek (lots of alu)

[JoeBar]

OMG! :eek2:

[Amiteriver]

Have 3 Koolace and storm waterblocks. One thing I discovered about the storm is the system has to be extra clean - I didn't have enough Antifreeze and throw in some junk in my rad and the little holes will gunk up. Hydrogen Peroxide works pretty good cleaning out the gummie stuff.:)

[krueml]

Looks like an innovatek (lots of alu)
Yep, it is.. never had any problems with their coolers..
But I'll buy a Watercool GPU-X soon..

[creidiki]

Good man, i dont have to take the spank squad out of their training room then.

[JME F1delity]

JME F1delity, beautiful case. do u use 2 pumps? or one of that is reservoir?

Thank you :D

I do use 2 pumps, yes.

[L'enFer]

JME F1delity, and 1 rad?

[JME F1delity]

JME F1delity, and 1 rad?

2 Rads..One on top and one on back

[Shpoon]

Sexy cases guys :p

[L'enFer]

JME F1delity, thanx (i could not understand: how cuold it work with 2 pumps and 1 rad...:))

[phelan1777]

krueml Very clean tubing and wiring.:clap:

[krueml]

Thanks you! :)

[ahpaul82]

Just assembled the Gigabyte 3D Galaxy WC Kit this afternoon,
here is the pic :
http://img419.imageshack.us/img419/1704/3dgalaxywckit007a3jq.jpg

http://img389.imageshack.us/img389/1634/3dgalaxywckit008a1dj.jpg

waiting the Corsair 2x1GB XMS3500LL PRO RAM :)

*how to take nice pic ?
my camera seem cannot capture nice pic ...
Im using Canon Ixus 40.

[L'enFer]

ahpaul82, beauty, but what does that cooler do?

[ahpaul82]

ahpaul82, beauty, but what does that cooler do?

here is the explaination :D
http://img366.imageshack.us/img366/6418/gigabyte1wz.png

[L'enFer]

ahpaul82, i see, thanx, but i think mosfet isn't so hot to cool it with cooler. problem of heating of mosfet could be coped by some little rads :).

[JoeBar]

The least of its downsides is the "mosfet cooler" or its best feature, if u prefer... :lol:

[jrw]

Rewamped my setup.

1/2" ID T-Line.

Slashed HDbay from old case holding my precious pump :)

[el rolio]

oh very very very nicely done jrw.

very neat and i can imagine its very quiet. nice to see you running the same way i was. 300x10, 166 divider, 250@2-2-2 yay :D

[OCme]

Nice jrw but where is yur HD mounted? I don't see it.

[jrw]

Nice jrw but where is yur HD mounted? I don't see it.

It has some rather nasty mechanical noise (Seagate Barracuda), so it's usually lying on the bottom below the video card on a piece of soft foam rubber.

On another note:
I've found a really clever way to mount memory and mosfet cooling (air). Will take a few pics when I have the time...

[Absolute_0]

WC update, testing Swiftech parts:

:toast:

Very nice, very bright. Which UV lights are those?

[Seufar]

man... everyone's WC looks alot better than mine... I'll see if I can get her looking good before I post pictures

[computerman0416]

Rewamped my setup.

1/2" ID T-Line.

Slashed HDbay from old case holding my precious pump :)

Nice until you get the rest of the system in there. Lets see your cable management skills when you complete the hardware inside.

[jrw]

Nice until you get the rest of the system in there. Lets see your cable management skills when you complete the hardware inside.

Very true. The cable-work is the real challenge packing a 120.2 rad inside a case THIS small.

Im benching quite a bit, so you'll see a lot of fans in there as well :toast:

[creidiki]

/me cries at all the 90-degree barbs, side inlet on ddc, alu tank & stuff :(

[Shakermaker]

There is no need to cry creidiki. ;-)

[YanBooth]

I've made some changes and this is the result.

you know, it hurts so much when i get that email, and I get excited, ya know, lotsa pics to be had, then you go to the page, they dont load, then you go to the actual link to the image and it gives you a loading error, very hard on the soul that is!

Yan

[OCme]

swimming in tears here too...not to mention his use of 3/8" tubing & very restrictive VC water blocks & use of a res. many performance killers! :(

A+ on the bling, bling though! :p:

[creidiki]

Yah I must say it looks really good, even though im pretty much a nihilist when it comes to bling :lol:

[OCme]

shakermaker... ain't we learned you nutten boy!

[Radical_53]

You should really consider different blocks for the cards on the next upgrade, also a different chipset block would give you better results.
You could also use that to upgrade to bigger tubing and mod that plex top on the DDC ;)
It's a huge case, use it! :toast:

[[XC]melymel]

Here's my first attempt at water cooling i have already made a post about it not being powerful enough for my 805 but it's just to wet my appetite for it and i'll be updating this setup very soon. Sorry for the low quality of the pics i took them on my phone. The cpu block is an XSPC X2O which is quite good for a cheap block, 4ft of 1/2" OD tubing, 120mm rad with dual papst ngn 100cfm+ fans, eheim 600lph aquarium pump and i use a bucket for my res :p: . cost <£30

http://i17.photobucket.com/albums/b58/Melymel2789/Photo-0011.jpg

http://i17.photobucket.com/albums/b58/Melymel2789/Photo-0014.jpg

http://i17.photobucket.com/albums/b58/Melymel2789/Photo-0015.jpg

:toast:

[SaFrOuT]

i think if u try to remove one of the 2 fans and run the other one @ 7v u will get the same results with much less noise

[[XC]melymel]

hmm i haven't really tried i followed the philosophy of more is better :D i'll pull a fan off see if it's better, cheers for the advice :toast:

[SaFrOuT]

only saying that cauuse ur rad appears to be one of the quiet series , maybe MCR-120 or something like that so using a high cfm fan on it won't increase its performance

[[XC]melymel]

Seems you were right load temps are still only 64C with one fan, no need to undervolt it as i don't mind noise :D cheers for the advice :toast:

[JoeBar]

@ shakermaker. Apart from the wc stuff that were suggested u need some cable management.

[paco420]

The monster,
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-899F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-896F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-891F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-900F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-901F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-892F.jpg

[ReD.SkY]

Hella Tight...

what case is that?

[paco420]

Thanks,
It's an InWin q350
:toast:

[funkflix]

Lol! 4 x 120x120x38.. but not @ 12V, or? :D Are this Vantec, Sunon, or Deltas?

[paco420]

There are 6 120x38mm Sunon's and 2 80x38 Vantek's :cool:
The sunons run about 6-7 volts, just enough to spin them up.
The Vantek's stay off (don't meed them)
Here are more recent pics.

(need to clean the window..sorry)
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-112F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-111F.jpg
:toast:

[SaFrOuT]

show us a pic to ur case's side but remove the side panel first

[ReD.SkY]

Totally OT, but SaFrOuT, Your sig would look way cooler if you made the white area transparent so all tou acould see is the yellow/red border around specs.

[SaFrOuT]

well i wihs i can do that but i am not that pro with PS

i have the source file if u can help me ;)

[ReD.SkY]

well i wihs i can do that but i am not that pro with PS

i have the source file if u can help me ;)

i'd be glad to, just email it to me at omegasli @ gmail.com (i hope u know that u have to remove the spaces ;)

[Seufar]

Totally OT, but SaFrOuT, Your sig would look way cooler if you made the white area transparent so all tou acould see is the yellow/red border around specs.

Agreed!

and NICE setup paco420

[ReD.SkY]

Fixed for u lol http://img155.imageshack.us/img155/6707/safroutsigtrans1zh.png

now ur sig is the pwnage :banana::woot: ;)

[JoeBar]

There are 6 120x38mm Sunon's and 2 80x38 Vantek's :cool:
The sunons run about 6-7 volts, just enough to spin them up.
The Vantek's stay off (don't meed them)

That's some really noisy fans... :)

[Vice]

That's one massive case.

[YanBooth]

That's some really noisy fans... :)
i wonder, will 32+ (quantity) 120mm yate loon fans be less, or more loud than the loud sunons?

thats the rough picture i made based off my drawings, 24" cube, which i am going to have done my mountain mods in the near future. there is room for two 3x120mm rads, and one 2x120mm rad. im only going to have to loops, both on PA120.3's with shrouds and push pull setups on both.

a little crazy? hell yes

[YanBooth]

btw, i dont have photoshop on this laptop (i am overseas, in the UK (picking some thermochill shrouds up direct ;) so yeah...)) so excuse the roughness of the cobbled together image

[JoeBar]

That's xtreme... :D

[black rose]

i wonder, will 32+ (quantity) 120mm yate loon fans be less, or more loud than the loud sunons?

thats the rough picture i made based off my drawings, 24" cube, which i am going to have done my mountain mods in the near future. there is room for two 3x120mm rads, and one 2x120mm rad. im only going to have to loops, both on PA120.3's with shrouds and push pull setups on both.

a little crazy? hell yes

I don't see any brackets to bolt that jet to the damn desk? Freakin crazy :toast:

[paco420]

That's some really noisy fans... :)

LOL, you should have heard it with these on top.....

http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-116F.jpg

[mikey976]

here is my rig before i switched my rad to a 77 bonnevile,

[Pied]

LOL, you should have heard it with these on top.....

http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-116F.jpg

WTH! LOL

[L'enFer]

mikey976 , u've turned your mboard? why?

[VanXylander]

WTH! LOL

lololol

((neighbor)) Hey man, whats that noise?!?! It is really bothering the neighbors... could you maybe turn it down? Oh... and if you don't mind me asking... what the heck is it? A jet engine or something?

((paco420)) Sort of, come check it out...

((neighbor)) Wooahh... what the.... what is that?

((paco420)) Its a fan, jet engine, shredder, disposal, oh... and its part of my water cooling system...

((neighbor)) A disposal? A water cooling system?? For what?

((paco420)) Oh... you know... I can use it for a bunch of stuff.... getting rid of trash, flying to the grocery store, cooling my pc... and.... Nosy Neighbors. {{paco pushes neighbor into the fan}}

((paco420)) Ugh... Now i'm going to have to clean my radiators again... I knew I should have installed fan filters.

[Delirious]

What were u trying to do? Suck your components through the fans and out the case? :D

LOL, you should have heard it with these on top.....

http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-116F.jpg

[Vice]

are those the 220cfm delta fans ? You use those to make your car hover or something ?

[phelan1777]

What? I Can't Hear You!

[JoeBar]

These are some nice fans for my car rad... :p:

[paco420]

lololol

((neighbor)) Hey man, whats that noise?!?! It is really bothering the neighbors... could you maybe turn it down? Oh... and if you don't mind me asking... what the heck is it? A jet engine or something?

((paco420)) Sort of, come check it out...

((neighbor)) Wooahh... what the.... what is that?

((paco420)) Its a fan, jet engine, shredder, disposal, oh... and its part of my water cooling system...

((neighbor)) A disposal? A water cooling system?? For what?

((paco420)) Oh... you know... I can use it for a bunch of stuff.... getting rid of trash, flying to the grocery store, cooling my pc... and.... Nosy Neighbors. {{paco pushes neighbor into the fan}}

((paco420)) Ugh... Now i'm going to have to clean my radiators again... I knew I should have installed fan filters.

LOL, Thats awesome!

SaFrOuT, I am waiting for some new Tygon to fix one of the loops, Once I receive it and open her up I will post a pic of the inside. It's a pain to open it up and I don't want to do it twice.

Vice, Yes they are the 220 cfm delta GHB! No they dont have enough power to move my car, but a few more might!:clap:

JoeBar, These are MORE powerfull than your car! :p:

Thanks for the comments.:toast:

[phelan1777]

lololol

((neighbor)) Hey man, whats that noise?!?! It is really bothering the neighbors... could you maybe turn it down? Oh... and if you don't mind me asking... what the heck is it? A jet engine or something?

((paco420)) Sort of, come check it out...

((neighbor)) Wooahh... what the.... what is that?

((paco420)) Its a fan, jet engine, shredder, disposal, oh... and its part of my water cooling system...

((neighbor)) A disposal? A water cooling system?? For what?

((paco420)) Oh... you know... I can use it for a bunch of stuff.... getting rid of trash, flying to the grocery store, cooling my pc... and.... Nosy Neighbors. {{paco pushes neighbor into the fan}}

((paco420)) Ugh... Now i'm going to have to clean my radiators again... I knew I should have installed fan filters.


hehehee did you ahve to sharpen the blades?

[mad mikee]

The old setup (Bsmt):
http://www.xtremesystems.org/forums/attachment.php?attachmentid=48298&stc=1&d=1150245386

Some MB PREP (Fan was for upstairs Unit, otherwise all alike :D)
http://www.xtremesystems.org/forums/attachment.php?attachmentid=48301&stc=1&d=1150245694
Now the below units have CPU/GPU/Chipset under water :D

MMFDCChaser1:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=48302&stc=1&d=1150245725

MMFDCChaser2:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=48303&stc=1&d=1150245725

[ReD.SkY]

why is your "L" fitting so obese?

[The_NamelessOne]

this was my case some weeks ago...


http://img275.imageshack.us/img275/8312/dscn31913vp.jpg
http://img389.imageshack.us/img389/5428/dscn31718dk.jpg

now my new setup, changed pump and vga card to a 7900gt:D ....

http://img238.imageshack.us/img238/1462/dscn32818jo.th.jpg (http://img238.imageshack.us/my.php?image=dscn32818jo.jpg) http://img240.imageshack.us/img240/4290/dscn31886kb.th.jpg (http://img240.imageshack.us/my.php?image=dscn31886kb.jpg)
http://img238.imageshack.us/img238/2886/dscn32774zz.th.jpg (http://img238.imageshack.us/my.php?image=dscn32774zz.jpg)
http://img108.imageshack.us/img108/7933/dscn32780jr.th.jpg (http://img108.imageshack.us/my.php?image=dscn32780jr.jpg)

[Camo]

may as well post my wc case up

http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0672.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0672.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0673.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0673.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0674.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0674.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0680.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0680.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0681.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0681.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0682.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0682.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0684.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0684.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0685.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0685.jpg)
http://img.photobucket.com/albums/v419/crimson_sunset/Armor/th_DSCN0686.jpg (http://img.photobucket.com/albums/v419/crimson_sunset/Armor/DSCN0686.jpg)


i'll be selling the armor to a mate in a couple weeks, and replacing it with a stacker, should be a nice change

[nop]

looking forward to your stacker Camo :)

[Camo]

me too:D

[mad mikee]

1. Those are 5/8" barbs.

2. Larger 'L' slows water down for a moment so that it releases bubbles, and is VERY smooth 'sweep' inside, so minimal flow issues.

3. looked like good choice @ time (still does :D ) Function over form :hammer:

why is your "L" fitting so obese?

[CompGeek]

http://img220.imageshack.us/img220/9946/rig9vk.jpg


heres my pimped out rig, rofl :toast:

camera phone ftw!

[thunderstruck!]

Compgeek your fuzzy pictures are so hurting on the eyes, enough already!!

[ReD.SkY]

what eyes? i was rubbing my monitor with my fingers trying to feel the picture

[jrw]

Nice until you get the rest of the system in there. Lets see your cable management skills when you complete the hardware inside.

How do you like it?

Dual fanmate on the floppy-cage controls the two 120mm casefans.

Will post images of memory and mosfet cooling later :)

[SaFrOuT]

that place of hdd will produce a lot of noise

put under it something to dump the vibration noise

[jrw]

that place of hdd will produce a lot of noise

put under it something to dump the vibration noise

It lies on a 2" thick sponge rubber pad. Look closer :)

[SaFrOuT]

ops my bad

[OCme]

SaFrOuT you could try mounting your HD in the floppy bay... it hangs out the back a little but is much more secure & will run cooler.

[Defyant]

Not as extreme as some of the awsome WC'd cooled pc here! but more for show...

Defyant WC rigs.



Very first WC'd rig HP-R ..bit embarrasing now :P

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%201/DSCF0002.jpg

My old duel xeon rig

http://i5.photobucket.com/albums/y165/Defyantmods/Gateway%20Rising/WORKLOG/DSCF0350.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/Gateway%20Rising/WORKLOG/DSCF0326.jpg

HP-R rebuilt!

http://i5.photobucket.com/albums/y165/Defyantmods/HP1%20Resurrected/IMG_2515.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HP1%20Resurrected/IMG_2535.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HP1%20Resurrected/IMG_2537.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HP1%20Resurrected/IMG_2544.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HP1%20Resurrected/IMG_2562.jpg

HP-2

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/FINAL%20SHOTS/DSCF1868.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/FINAL%20SHOTS/DSCF1849.jpg


HP-2 rebuilt!

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/HP2%20BLUE/IMG_1556.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/HP2%20BLUE/IMG_1591.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/HP2%20BLUE/IMG_1674.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/HP2%20BLUE/IMG_1635.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/HP2%20BLUE/IMG_1581.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%20II%20Evolution/HP2%20BLUE/IMG_1599.jpg

[Defyant]

Persplexed! a bit of fun this one :)




http://i5.photobucket.com/albums/y165/Defyantmods/PERPLEXED/IMG_7468.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/PERPLEXED/IMG_7712.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/PERPLEXED/IMG_7706.jpg


Hevy plex Superlanboy! my son helped build this one :)

http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1101.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1100.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1099.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1128.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1068.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1087.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/Hevy%20Plex%20SLB/IMG_1084.jpg

[Defyant]

STORM'D also built for my son to replace the above case.


http://i5.photobucket.com/albums/y165/Defyantmods/STORMED/STORMD%20EVO/IMG_0399.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/STORMED/STORMD%20EVO/IMG_0421.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/STORMED/STORMD%20EVO/IMG_0444.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/STORMED/STORMD%20EVO/IMG_0363.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/STORMED/STORMD%20EVO/IMG_0419.jpg


--------------------------------------------------------------------------------------------------


flameD!

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%204/IMG_3188.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%204/IMG_3189.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%204/IMG_3202.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%204/IMG_3193.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%204/IMG_3197.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/HPResurrection%204/IMG_3019.jpg

[Defyant]

HP3- MEGA

http://i5.photobucket.com/albums/y165/Defyantmods/1.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/2.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/9.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/8.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/14.jpg

http://i5.photobucket.com/albums/y165/Defyantmods/12.jpg


http://i5.photobucket.com/albums/y165/Defyantmods/13.jpg

[jrw]

I guess your son really NEEDED that upgrade ;)

Awsome work. Just awsome!

[OCme]

Some of the best mod work I've ever seen...your more like a computer artist!

[yngndrw]

They are some seriously impressive cases .. I'm afraid to mod my case now because there will be no contest .. Just wow.

[JoeBar]

Great cases Defyant! :up:
Although i like to see my hw... :p:

[crookcatchr]

Those are some great looking cases. :clap:

How are the temps of the ones with the montherboards covered?

[gearhead]

my first water cooler:<br>
http://img55.imageshack.us/img55/6474/dscf00249ms.th.jpg (http://img55.imageshack.us/my.php?image=dscf00249ms.jpg)
custom vrm h/s
http://img55.imageshack.us/img55/5713/dscf00230yu.th.jpg (http://img55.imageshack.us/my.php?image=dscf00230yu.jpg)

[Defyant]

Thanx very much guys :)

Some of the best mod work I've ever seen...your more like a computer artist!

TY mate appreciate that :)


Those are some great looking cases. :clap:

How are the temps of the ones with the montherboards covered?


Most of the heat gets carried away from the "hot spots" and a bit smart flow keeps the the hardware cool enuf.

The only pc there that runs above 40 on a hot day is "STORM'D".... but my son runs the 775 P4 and 6600GT overclocked! and the Single BIX does struggle ( have plans to upgrade to a BIX2 like the HP1 mod.


All the mods incorp passive or active flow under the covers! i recently did an aircooled server with cover as well.. this PC with 6 x 250+gig hdds would die without smart cooling.

thanx again guys :) aprreciate the comments.

[ReD.SkY]

holy crap dude, are you adopting :D

[CCUABIDExORxDIE]

Defyant. your work makes me cry tears of joy.

now for a little of my "work" :)

http://www.sourcekills.com/albums/The-Illest-and-Realest-Photos-EVER%21/stuff_002.sized.jpg

http://www.sourcekills.com/albums/The-Illest-and-Realest-Photos-EVER%21/stuff_003.sized.jpg

http://www.sourcekills.com/albums/The-Illest-and-Realest-Photos-EVER%21/stuff_009.sized.jpg

ghetto but i like it.

[Camo]

defyant, love seeing your work, i could never be patient enough to do all the stuff you do to make such great cases, good to see some great quality cases coming from australia:toast:

[4Qman]

Defyant,

Complete class mate. RESPECT!!!! :toast:

[flutie98]

Defyant, amazing works

i really like the idea of covered motherboards it almost takes the computer away from the windowed look, makes it look so clean

[JoeBar]

But not like a computer... ;)

[phelan1777]

Defyant. your work makes me cry tears of joy.

now for a little of my "work" :)

http://www.sourcekills.com/albums/The-Illest-and-Realest-Photos-EVER%21/stuff_002.sized.jpg


THAT is a Huge Rad box!

[CCUABIDExORxDIE]

THAT is a Huge Rad box!

yes it is...USPS boxes to the rescue! it eliminates deadspot soo well...and quites the fans really well.

[stone_cold_Jimi]

Last summer's model, I think everything has changed now. Chaintech mobo died, swapped CPU for a Venice, rebuilt 6800 Ultra as air cooled again etc. It was nice while it lasted -

[yngndrw]

Why did you switch your GPU to air cooled ?

[SiGfever]

Defyant,

You are the "Wizard of Wonder"! :toast: :toast: :clap: :clap:

[stone_cold_Jimi]

Why did you switch your GPU to air cooled ?

Heh, I was going to sell it. The big problem I found with the DD NV-68 block was weight - it twisted the card so it's really difficult to set it up so GPU / block contact is always good, even with the thumbscrews tight. I stuck a "prop" between block and case floor which helped, but it wasn't great.

I might put the block back on; the other reason for going back to air was to give the CPU more cooling. As it turns out, the diff is about 2C, so hardly worth the effort. Perhaps a Maze GPU block would work out better?

[yngndrw]

Well I use a Maze 4 GPU and it cools my card fine. I've found that removing the heat from the core cools down the memory anyway, so I doubt a full cover card would do a lot.

Infact my GPU core didn't gain anything from watercooling, but changing the RAM cooler from stock to Swifty RAM sinks and removing the core's heat got me an extra 50-100Mhz on the memory.

I never thought about the weight with them full cover blocks, it's a good point though.

[[KM]Sven]

here´s mine
NB and CPU cooler selfmade
case selfmade, too


http://img375.imageshack.us/img375/3751/bild291421gy.jpg (http://imageshack.us)

[ReD.SkY]

ooh black tubing (i hope vapor see's this :D)

[Grinch]

Sven']here´s mine
NB and CPU cooler selfmade
case selfmade, too


http://img375.imageshack.us/img375/3751/bild291421gy.jpg (http://imageshack.us)



very neat!:toast:

[ReD.SkY]

Well.... i'd just like to say...

:woot::woot::woot:
:toast::toast::toast:
:D:D:D:D:D:D:D:D:D:D:D
:banana: :banana: :banana: :banana: :banana:

1000 Posts!!!!!!

[vexvegaz]

heres an update guys, i was thinking of putting a WB for both 7900gt but with dying issues ive heard i dont really wanna trash my warantee. :(

http://i81.photobucket.com/albums/j213/vexvegaz/mypc.jpg
http://i81.photobucket.com/albums/j213/vexvegaz/IMG_3502.jpg

[SaFrOuT]

i don't like the montir being placed like this

why r u using it in this way? a special reson or only u like it

[eXa]

you dont have to scroll that much....

[vexvegaz]

i don't like the montir being placed like this

why r u using it in this way? a special reson or only u like it

makes reading forums much easier and it automaticly switches back to normal viewing when i turn the monitor

[SaFrOuT]

but tell me that u don't play games like that ;)

[phelan1777]

hmmm having two three monitors turned vertical side by side, talk about wicked, well in theory anyway.

[vexvegaz]

but tell me that u don't play games like that ;)

only tetris...lol j.k.

naw cant think of a reason why i would play that way

[phelan1777]

only tetris...lol j.k.

naw cant think of a reason why i would play that way


One reason and one reason only.

FLIGHT SIMS! I would have a sweet field of vision, with the Head tracking Kit, and one vertical monitor, and two horizntal. except the vert one would have to be the DELL 30"! WOOT! if it supported that use:D

[SaFrOuT]

now that si Xtreme :)

[XFxGeforced]

I just redid my wc because i recently killed my opty 148 with no warranty by taking the ihs off and knocking off an ic, so i have some free time. anyway, i made the tubes alot shorter and the wc box under the case, which i just rushed together, so its notjhing special, anyway, i dont have any ram cpu or video card in it, but its ready for them ;) -dont think ive seen you on eocf in awhile SaFrOuT
http://img152.imageshack.us/img152/5940/wcboxsmalelr3wd.th.jpg (http://img152.imageshack.us/my.php?image=wcboxsmalelr3wd.jpg)

sorry, forgot to give specs. its a mag3 pump, dual heatercore with 2 120x38 panaflo medium speed fans which are mounted to the other side of the small case on the bottum, a dd rbx, maze 4 acetal and mix of tygon tubing and harder home depot stuff, with a 1:1 mix of dex-cool and water. anyone ever use dex-cool?

[jrw]

Is that a T-Line just in front of the CPU block? :nono:

[XFxGeforced]

Is that a T-Line just in front of the CPU block? :nono: yeah:( does it hurt the flow or something? i was going to change it but i didnt for some reason

*it was just the highest point of the loop

[jrw]

yeah:( does it hurt the flow or something? i was going to change it but i didnt for some reason

*it was just the highest point of the loop

A T-Line should ALWAYS be positioned just before the pump.

The purpose of the T-Line is to provide a surplus of water to the pump so that it performs its optimal.

In other words. Change loop order RIGHT NOW. :)

[XFxGeforced]

A T-Line should ALWAYS be positioned just before the pump.

The purpose of the T-Line is to provide a surplus of water to the pump so that it performs its optimal.

In other words. Change loop order RIGHT NOW. :)
well my pump is already a little too powerful for my taste. it tends to squeeze my tubes. and what do you mean by a surplus. if i cap the tline and its a closed circuit, everything will be getting the same air, and if i made my tline at the pump, do you see where it is? i could never get the air out of the line that way

[eXa]

A T-Line should ALWAYS be positioned just before the pump.

The purpose of the T-Line is to provide a surplus of water to the pump so that it performs its optimal.

In other words. Change loop order RIGHT NOW. :)

well it wont be much difference when the loop is full. its only when filling, that the line its better to have in front of the pump. the t-line restriction doesnt change from one position in a setup to another. so just leave it where it is!

[XFxGeforced]

well it wont be much difference when the loop is full. its only when filling, that the line its better to have in front of the pump. the t-line restriction doesnt change from one position in a setup to another. so just leave it where it is!
thanks, that's what I was thinking/hoping. Btw is that avatar cleavage of a butt?

[Vice]

Btw is that avatar cleavage of a butt?

Wow...

[Nettwerk]

hahahha

[Timmay]

thanks, that's what I was thinking/hoping. Btw is that avatar cleavage of a butt?

Hahah owned.

[phelan1777]

that is supposed to be his girlfriend's cleavage.

[eXa]

hm maybe ill shave my but and use that instead... :moon:

[XFxGeforced]

hm maybe ill shave my but and use that instead... :moon:
didnt mean as an insult, just asked that because I've seen pictures online where people make their butts look like cleavage :slap:

*you guys got me crackin' up. I had no idea :(

[eXa]

no offence taken! ;)

[phelan1777]

I think all this talk is just boosting his ego, cause if that is his girl, he has a right to brag, hell my gf would not let me do that, and I would have to put up a avatar that would turn her bright red :fact:

[JME F1delity]

added a few cathodes twords the back. Side panels arriving tomorrow :D

http://img88.imageshack.us/img88/2694/gutz9oq.jpg

[eXa]

@ Phelan:

yeah something like that :D

@ JME

wow dual AquaComputer pumps (1046) thats... youd be better of with an ddc+

[phelan1777]

Holy crowded case batman!

[YanBooth]

more pics, less chatter

[JME F1delity]

@ Phelan:

yeah something like that :D

@ JME

wow dual AquaComputer pumps (1046) thats... youd be better of with an ddc+

Theyre running the same as 1048's :\

[SaFrOuT]

this is a temp placment for the rad till i find a way to get more tubes from the US :(

http://img361.imageshack.us/img361/9089/watercooling3uu.jpg

[postman]

Im going to show the blocks i make, very known in spain.
The vga block.

http://i6.photobucket.com/albums/y210/p0stman/vga_universal.jpg

Later, Im showing the cpu one and nb one.

Saludos.

[geep®]

postman, es aluminio anodizado ó Delrin?

Se vé muy bien tu bloque, tiene cierto parecido al Maze4 y la base del espesor del MCW60, muestra imagenes del interior del bloque.

Saludos.

[EnJoY]

Im going to show the blocks i make, very known in spain.
The vga block.

Later, Im showing the cpu one and nb one.

Saludos.


Any pics of the internals?

[[XC] Angstrom]

Hmm WB pr0n, take it off!

[Kain XS]

postman, es aluminio anodizado ó Delrin?

Se vé muy bien tu bloque, tiene cierto parecido al Maze4 y la base del espesor del MCW60, muestra imagenes del interior del bloque.

Saludos.
Hi Geep.
Why in Spanish? Do you personally know him?

Well, it seems to be a little bit similar to the Maze 4 I own.

If he could dissamble it to get some images it could be great.

Postman... just remember to be carefull in that way and check the seals before installing it again (for leaks).

[Big D]

http://img.photobucket.com/albums/v226/shootingblanks/14a.jpg

http://img.photobucket.com/albums/v226/shootingblanks/15a.jpg

[ReD.SkY]

really sweet setup D,

the water is so watery :D u used zerex only right?

[Big D]

yeap I only used zerex racing super coolant and distilled water:cool:

[postman]

postman, es aluminio anodizado ó Delrin?

Se vé muy bien tu bloque, tiene cierto parecido al Maze4 y la base del espesor del MCW60, muestra imagenes del interior del bloque.

Saludos.

Hola.
Es Delrin, a ver si le hago fotos al interior a alguno de los bloques que tengo sin ensamblar, y las pongo.




Any pics of the internals?


Ok, i will show the internal when i arrive to my house.

Hi Geep.
Why in Spanish? Do you personally know him?

Well, it seems to be a little bit similar to the Maze 4 I own.

If he could dissamble it to get some images it could be great.

Postman... just remember to be carefull in that way and check the seals before installing it again (for leaks).

You are right, this is a english talking forum, then, we could to speak in english.
No problem with leaks, the top and base plate are sealed with a piece of rubber sheet, you will see it when i show pics of the internals.
In addition, i have done hundreds of blocks for the people, and no problem with leaks.

Greetings.

[fpompert]

Here's my pocket Dual Opteron SLI powerhouse :)

http://tweakers.net/ext/f/5dd550c384253c92dab0929fb213c2d9/thumb.jpg (http://tweakers.net/ext/f/5dd550c384253c92dab0929fb213c2d9/full.jpg)
All clean and interior watercooling (CPU's that is, the SLI cards are cooled with air)

http://tweakers.net/ext/f/cf0e4ca7c968d5e1f0c55e0426fd4e47/thumb.jpg (http://tweakers.net/ext/f/cf0e4ca7c968d5e1f0c55e0426fd4e47/full.jpg)
This case is small, so I'll really have to think were to put all those cables :)

http://tweakers.net/ext/f/8eb8eed5250ffb453d7bb7cef94e976e/thumb.jpg (http://tweakers.net/ext/f/8eb8eed5250ffb453d7bb7cef94e976e/full.jpg)
A push-pull setup with SilenX 14dB fans (which are noisier than 14dB on 12V ! ;) comparing them to the stock Lian Li fans...), the radiator is a Black Ice GT Stealth 120

[4Qman]

fpompert,

Mate love it, clean looking. What display in the top bay is that mate.

[GordonFreemanLP]

A little liquid system for dayly use...

http://i73.imagethrust.com/i/500653/dscn0866.jpg

http://i73.imagethrust.com/i/500652/dscn0865.jpg

[fpompert]

fpompert,

Mate love it, clean looking. What display in the top bay is that mate.

Thats a MatrixOrbital MX620 PLED screen (aluminium bezel) with a black bezel installed, so actually it should be called MX630 :)

Its a lot brighter than on the picture but I have to use the sports setting on the camera to get a decent shot...

You can get it in the UK at kustompcs.co.uk if you are interested:
http://kustompcs.co.uk/acatalog/Displays.html

[Kain XS]

Hola.
Es Delrin, a ver si le hago fotos al interior a alguno de los bloques que tengo sin ensamblar, y las pongo.




Ok, i will show the internal when i arrive to my house.



You are right, this is a english talking forum, then, we could to speak in english.
No problem with leaks, the top and base plate are sealed with a piece of rubber sheet, you will see it when i show pics of the internals.
In addition, i have done hundreds of blocks for the people, and no problem with leaks.

Greetings.
Ok, there is no problem, Yo entiendo completamente ;)

I just was wondering if you personally know Geep.

[Makubex_GB]

Later, Im showing the cpu one and nb one.

Saludos.
Bueno, y los bloque del CPU y del NB?
(Well, and the CPU and NB blocks?)

You said later, it's been a day! Don't play with us!! :nono:

[postman]

Bueno, y los bloque del CPU y del NB?
(Well, and the CPU and NB blocks?)

You said later, it's been a day! Don't play with us!! :nono:


mmmm, sorry.
Here is the NB block, the internals are the same in the VGA block.

http://i6.photobucket.com/albums/y210/p0stman/web.jpg

The internal design may seems very simple, but the performance is very good (I have compared directly PostmanVGA and Maze4, and get the same performance), and the restriction is very low.

Greetings.

[sephiroth8748]

http://i72.imagethrust.com/t/101143/picture007.jpg (http://i72.imagethrust.com/images/qjl/view-image/picture-007.html)

http://i72.imagethrust.com/t/101144/picture009.jpg (http://i72.imagethrust.com/images/qjm/view-image/picture-009.html)

http://i72.imagethrust.com/t/101145/picture010.jpg (http://i72.imagethrust.com/images/qjn/view-image/picture-010.html)

specs: D5, Swiftech micro res, storm, silverprop cyclone fusion, bip2, masterklear 7/16 tubing.

[daze]

The monster,
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-899F.jpg
http://i63.photobucket.com/albums/h135/paco4207_photos/MVC-896F.jpg


curios..how many radiator u have there??
one 3x120mm & one 2x120mm??
How many pumps, waterblock?

Cause i'm curious whether a G5 pump is sufficient enough to power
An Apogee, MCW60, MCW30, BI GT240 + BI Gt120...
Need advice and comment from pro here...
still in process building my own set...
reason i get a GT240 & Gt120 to able squeeze all in a midle tower case.wit mod of course.

[daze]

mmmm, sorry.
Here is the NB block, the internals are the same in the VGA block.
http://i6.photobucket.com/albums/y210/p0stman/web.jpg


Nice... and i spotted a Hidden Mickey..

[postman]

Nice... and i spotted a Hidden Mickey..

Oh, mickey, its true, maybe that block should be called "Postman MickeyBlock".

Greetings.

[Makubex_GB]

mmmm, sorry.
Here is the NB block, the internals are the same in the VGA block.

http://i6.photobucket.com/albums/y210/p0stman/web.jpg

The internal design may seems very simple, but the performance is very good (I have compared directly PostmanVGA and Maze4, and get the same performance), and the restriction is very low.

Greetings.
oohhhhh :slobber: , I can see the insides... just leave me alone with it for a minute...

:p: Very cool, thanks man.

[ShoNuff]

Nice block Postman. Very nice!

[delas52]

Re-did the loop and all my case wiring. The tubing is much better now too.

http://img512.imageshack.us/img512/489/656462624rk.jpg

http://img74.imageshack.us/img74/6084/1212212128wp.jpg

http://img522.imageshack.us/img522/9275/23233232321vv.jpg

http://img343.imageshack.us/img343/2215/45454545454543qt.jpg

http://img360.imageshack.us/img360/4903/5656556564yd.jpg

[Got Chow]

Some very nice work on here. I just realized there was a thread just for WC'd cases... This was posted earlier in the Computer Cases gallery... It's probably just as fitting here.

Voodoo PC MESA case, drilled for blowholes up top, everything inside has been upgraded from what Voodoo originally put in it. Not quite as creative and not as much effort as some of the cases on here though!

http://www.got-chow.com/pics/geek/rage_05.jpg
http://www.got-chow.com/pics/geek/rage_10.jpg
http://www.got-chow.com/pics/geek/rage_06.jpg
http://www.got-chow.com/pics/geek/rage_08.jpg

[eLw00d]

I do not like the tubes but the rest is fantastic !

[paco420]

curios..how many radiator u have there??
one 3x120mm & one 2x120mm??
How many pumps, waterblock?

Cause i'm curious whether a G5 pump is sufficient enough to power
An Apogee, MCW60, MCW30, BI GT240 + BI Gt120...
Need advice and comment from pro here...
still in process building my own set...
reason i get a GT240 & Gt120 to able squeeze all in a midle tower case.wit mod of course.

There are 2 radiators, 1 3x120 and 1 2x80, The cpu is on the 3x120, the NB and VGA are on the 2x80, 2 loops drawing from the same resivor.
This system could easily run with just the 3x120, I just like to go overboard!

As far as the pump, I have no experience with the g5. hopefully someone else can answer that one.

:toast:

[Got Chow]

Hee hee, my foggy tubes in Coolsleeves... Had to use them on 1 tube, so I had to put them on all of them for consistency. Foggy tubes is well... simply not cleaning it out correctly. I'm flushing the system and redoing it when my new block arrives.

[funkflix]

Cleaned it up a bit and did some wiremanagment. :)

http://img466.imageshack.us/img466/2033/pcaufraeumhell1ij.jpg

http://img466.imageshack.us/img466/8512/pcaufraeumdunkelan3yh.jpg

[ReD.SkY]

delas, is that a 2405 monitor ??

[el rolio]

Cleaned it up a bit and did some wiremanagment. :)


PRE-TTEH! ya, i like alot

[delas52]

delas, is that a 2405 monitor ??

I wish... it's a 2005fpw, still very nice though.

[krueml]

http://www.4eweb.de/pc/tj07/11.jpg

My rig.. :)

[daze]

cool..nice n clean..
may i know hows ur WC setup is??
parts n hows d flow go?

[L'enFer]

postman, nice blocks, but what is the material of the head of wb? is it copper?

[eXa]

Theyre running the same as 1048's :\

no the ac ones is 1046.....

[Sentential]

http://img.photobucket.com/albums/v180/Sentential/DSC00379.jpg

http://img.photobucket.com/albums/v180/Sentential/DSC00378.jpg

[SaFrOuT]

what liquid r u using ?

[funkflix]

PRE-TTEH! ya, i like alot

Thx. :)

Two more shots -

http://www.funkflix.de/pcseite/11.jpg

http://www.funkflix.de/pcseite/12.jpg

[postman]

postman, nice blocks, but what is the material of the head of wb? is it copper?

Hello.
The head of the blocks are made of black delrin, and the base are made of copper.
Greetings.

[Staucher]

http://img415.imageshack.us/img415/8248/lianlipc6143rn.jpg

[ghent915]

I <3 Voodoo cases. I know they are based on Lian-Li's...but they are still the sex.

I also like the meshing at the top of your case Staucher, that is quite cool. What did you use for it?

-Ghent

[Staucher]

Perforated plate

for example (http://www.perforated-metal.org/?gclid=CIrW06Lh9YUCFTBWQgoduXgkkw)

[L'enFer]

black delrin
hmmmm... didn't heard, but beauty. the most of that blocks that i've seen (i mean the heads of wbs) were made from plexiglas (and i did the same :)).

[daze]

Staucher:
wat rad u using..
was planing mine. same casing. n same placement of rad. but not sure will my PSU obstruct mine rad or not..

[rapty]

http://img223.imageshack.us/img223/9770/wcrig20if.th.jpg (http://img223.imageshack.us/my.php?image=wcrig20if.jpg)

http://img101.imageshack.us/img101/3001/wcrig38yr.th.jpg (http://img101.imageshack.us/my.php?image=wcrig38yr.jpg)

http://img101.imageshack.us/img101/1373/wcrig7iu.th.jpg (http://img101.imageshack.us/my.php?image=wcrig7iu.jpg)

http://img147.imageshack.us/img147/9053/case20hf.th.jpg (http://img147.imageshack.us/my.php?image=case20hf.jpg)

http://img100.imageshack.us/img100/3910/case10aq.th.jpg (http://img100.imageshack.us/my.php?image=case10aq.jpg)

http://img138.imageshack.us/img138/152/geil3uf.th.jpg (http://img138.imageshack.us/my.php?image=geil3uf.jpg)

Temperature Sensors on the Rad / CPU Core / Ram Sticks

Also Two Vantec Tornadoes for Ram Duct Cooling and Top Exhaust

Picture of the Ram Duct in Setup : http://img88.imageshack.us/img88/8174/mycomputer22bf.th.jpg (http://img88.imageshack.us/my.php?image=mycomputer22bf.jpg)

[tiborrr]

Pictures half a year old:

http://img219.imageshack.us/img219/6821/dscn27188tj.jpg

http://www.shrani.si/pics/dscn2991wcl84.jpg

http://www.shrani.si/pics/dscn2992qaw80.jpg

http://www.shrani.si/pics/dscn2993lhl82.jpg

[berknip]

*rapty* where did you pick up the RAM duct?

[Delirious]

*rapty* where did you pick up the RAM duct?

It comes with some lian-li cases.