Water Cooled Case Gallery

[Sveinbra]

@ Sveinbra
I like. I want to mount my dual120mm rad in the top of my stacker like you have your triple but I'm not sure how I'd go about doing it.

Cover the top with masking-tape, measure out where you need to cut the hole, take out your Dremel multitool and cut away! :)

Of course you need to remove everything inside the case first.. :) And you might have to put the PSU in the bottom of the case if you dont have room for it at the top, after you install the dualrad, but that is easy too..
You just drill out the "ribbits" that is holding the "PSU cover/frame" in place and remove it..

Hope this helps a little... ;)

[A Scream]

My first WC job! The WC is complete but I'm missing some black zips, my 4pin molex's, and a UV light. Otherwise the case is finished.

http://img446.imageshack.us/img446/3350/sany00242ex.th.jpg (http://img446.imageshack.us/my.php?image=sany00242ex.jpg)http://img407.imageshack.us/img407/1382/sany00256ww.th.jpg (http://img407.imageshack.us/my.php?image=sany00256ww.jpg)http://img116.imageshack.us/img116/2570/sany00277ry.th.jpg (http://img116.imageshack.us/my.php?image=sany00277ry.jpg)http://img306.imageshack.us/img306/6401/sany00289gm.th.jpg (http://img306.imageshack.us/my.php?image=sany00289gm.jpg)

[creidiki]

Bet you 10$ your temps wont shift for worse if you take off that single at the back. ;p

[A Scream]

probably, but I like to turn off the other fans and leave that one on low. Plus the tension from the cpu to GPU card was kinda high, so I opted to put that pressure somewhere else.

[J-Pepper]

Mine! :cool: :D

http://img213.imageshack.us/img213/5453/s4000934be.jpg

http://img209.imageshack.us/img209/6854/s40001070or.jpg

http://img209.imageshack.us/img209/5803/s40001295tn.jpg

Full Project Log http://forums.bit-tech.net/showthread.php?t=95854

[skaktuss]

two different ID tubes?? :eek:

[Nicksterr]

Maybe two different loops?

[J-Pepper]

yesh two different loops... 1 for the CPU cooled by a TC HE120.2mm rad and the other loop cools everything-else inside the rig on an evo360

[lv_dicedealer]

yesh two different loops... 1 for the CPU cooled by a TC HE120.2mm rad and the other loop cools everything-else inside the rig on an evo360

Talk about over kill!!

And I thought I was nuts building a rig with a PA120.3 and a PA160.... The closer to ambient, the better.

[Amd-man]

Here's my baby,Just need to gt some UV dye and hopefully soon a 320W peltier is to be fitted,For super sub zero temps.....:banana:


Here's my WaterChill Xtreme CPU/VGA/Chipset Cooling Kit Dual 120mm Radiator/Quad Fans.This rig keeps my AMD X2 4600+ Idle at 28-30c and my xfx 7800 gtx idle at about the same.


http://i34.photobucket.com/albums/d145/G-J-T/cpu-block.jpg
http://i34.photobucket.com/albums/d145/G-J-T/watercooling.jpg
http://i34.photobucket.com/albums/d145/G-J-T/watercooling2.jpg

And here are the temps:

Temp 1 refers to my cpu:
Temp 2 refers to my gpu:

http://i34.photobucket.com/albums/d145/G-J-T/waterchill-readings.jpg

[dnottis]

I know this is the WC gallery - but since you guys liked the CM 210 and 220s so much - here is a pic of mine from a few years ago. I think it was my p4 3.0 ES on a Asus board.

http://www.3dxtreme.net/other/DSC01995.JPG

[MadMikeSS]

Well, I can finally post pics of my system in here... :) Just got the V2000-B yesterday and I love this case. A couple issues with the rad that I'm using, but it's sufficient for what I need it to do.

http://www.thepengellys.com/stuff/case pics/DSCN2570.jpg

http://www.thepengellys.com/stuff/case pics/DSCN2571.jpg

http://www.thepengellys.com/stuff/case pics/DSCN2573.jpg

http://www.thepengellys.com/stuff/case pics/DSCN2575.jpg

http://www.thepengellys.com/stuff/case pics/DSCN2577.jpg

http://www.thepengellys.com/stuff/case pics/DSCN2578.jpg

[McLata]

Xaser III
http://img.photobucket.com/albums/v295/McLata/Xaser/XaserIII007.jpg

http://img.photobucket.com/albums/v295/McLata/Xaser/XaserIII013.jpg

http://img.photobucket.com/albums/v295/McLata/Xaser/XaserIII001.jpg

http://img.photobucket.com/albums/v295/McLata/Xaser/XaserIII058.jpg

http://img.photobucket.com/albums/v295/McLata/Xaser/XaserIII082.jpg

[maratus]

MadMikeSS, why are you using MCW60 istead of MP-1 (in your siG) ?

[MadMikeSS]

MadMikeSS, why are you using MCW60 istead of MP-1 (in your siG) ?

cuz I just tested it, the mp-1 and maze 4 and I felt like using the MCW-60. :)

[mad mikee]

Reverse the fan/shroud to pull air from casefront -> rad ->into case, will exhaust throught bottom back just FINE :D (I speak from personal experience :fact: (pats V2000 w/PA160)) And if you think that is fun, try doing the same setup in a v1000 :eek:

[MadMikeSS]

Reverse the fan/shroud to pull air from casefront -> rad ->into case, will exhaust throught bottom back just FINE :D (I speak from personal experience :fact: (pats V2000 w/PA160)) And if you think that is fun, try doing the same setup in a v1000 :eek:

Did you mount the rad? Or did you just have it sitting there?

[nugzo]

This is my first attemt at water cooling. I guess it does ok. 1000mhz OC on CPU with load temps of 38-40c.
Exos 2, DD MAZE4GPU x2, DD TDX.
I'm up for suggestions.
Is anybody modding the Exos 2?
I'd like a better pump!



http://img107.imageshack.us/img107/736/water0018hj.jpg

http://img240.imageshack.us/img240/4492/water0020nc.jpg

http://img107.imageshack.us/img107/8258/water007orig0xe.jpg

http://img240.imageshack.us/img240/5268/water0064st.jpg

[Leeum]

Nice setup nugzo :toast:

Any chance you can resize those pics though? :/

[nugzo]

Nice setup nugzo :toast:

Any chance you can resize those pics though? :/

Thanks. Resized.

[mindwreck]

http://www.thepengellys.com/stuff/case pics/DSCN2578.jpg


might want to push that back in a little bit before it falls off the table:slap:

[MaxxxRacer]

Timber!

[MadMikeSS]

might want to push that back in a little bit before it falls off the table:slap:

Don't worry, the wheels are locked and there is no imminent danger.

[Jokester_wild]

This was the system till three days ago i sold the case to a friend am now working on my Lian-Li case atm.

http://img81.imageshack.us/img81/9633/watercooling6ts.jpg

http://img66.imageshack.us/img66/8450/topmod3iq.jpg

http://img216.imageshack.us/img216/6775/comp0uk.jpg

http://img216.imageshack.us/img216/7162/x800xtwced29gw.jpg

[Mogge_]

My system:
AMD Opteron 165 @ 2.6GHz
ASUS A8N SLI DELUXE
OCZ 2GB GOLD XTC pc4000 @ 3-3-3-5 ; 236.5MHz
Gainward Geforce 7800GT 256MB Golden Sample @ 450/1100 MHZ

My watercooling parts:
DangerDen TDX CPU Block 1/2" ID
DangerDen Maze4 GPU Block 1/2" ID
AquaComputer Chipsett Block 1/2" ID
AquaComputer Memory Block 1/2" ID
Swiftech MCP655 1/2" ID
HW Black Ice Pro dual rad 1/2" ID
Cooltek single rad 1/2" ID
DangerDen Fillport 1/2" ID
Primoflex 1/2" ID tubing

[Sc4mpi]

My new one. fresh off the press :)

http://i7.photobucket.com/albums/y266/Sc4mpi2/pc-07/pc-07.jpg

http://i7.photobucket.com/albums/y266/Sc4mpi2/pc-07/07-atnight.jpg

ddc ultra
tdx
maze 4 lp
2xbix
bip2
3/8th r3603
4x papst 4212ngn's on a aquaero

[scream]

My new one. fresh off the press :)

http://i7.photobucket.com/albums/y266/Sc4mpi2/pc-07/pc-07.jpg

http://i7.photobucket.com/albums/y266/Sc4mpi2/pc-07/07-atnight.jpg

ddc ultra
tdx
maze 4 lp
2xbix
bip2
3/8th r3603
4x papst 4212ngn's on a aquaero

awesome rig dude... the neatness is superb... :toast:

[scream]

this was my rig.. before i went back to air...

http://i30.photobucket.com/albums/c338/timpal/DSC00009.jpg

http://i30.photobucket.com/albums/c338/timpal/DSC00010.jpg

http://i30.photobucket.com/albums/c338/timpal/DSC00011.jpg

was my first water setup and my first heart attack too.. while fixing this hoe up... one tube came loose and spilled coolant all over the board... thankfully nothing happened cause its wasn't powered up.. used a hairdryer to clean the mess up and everything was fine... =)

[D_o_S]

this was my rig.. before i went back to air...

http://i30.photobucket.com/albums/c338/timpal/DSC00009.jpg

http://i30.photobucket.com/albums/c338/timpal/DSC00010.jpg

http://i30.photobucket.com/albums/c338/timpal/DSC00011.jpg

was my first water setup and my first heart attack too.. while fixing this hoe up... one tube came loose and spilled coolant all over the board... thankfully nothing happened cause its wasn't powered up.. used a hairdryer to clean the mess up and everything was fine... =)

Maybe you should have bought a decent WC setup in the first place... TT Bigwater has been a no-no for a long time :nono:

[pissboy]

http://img216.imageshack.us/img216/7162/x800xtwced29gw.jpg

Love those heatsinks. :)

[scream]

Maybe you should have bought a decent WC setup in the first place... TT Bigwater has been a no-no for a long time :nono:

yeah.. i realised that after the lousy preformance.. my fatality is giving me similar temps.. =) if not better... :banana:

[mad mikee]

There's a pic back in here somewherehttp://www.xtremesystems.org/forums/showpost.php?p=1224291&postcount=888, but yeah cut out the bottom to match PA160 fin area and put some foam weatherstripping @ hole border, then just put rad on top.

Did you mount the rad? Or did you just have it sitting there?

[Gimmpy224]

>_< i would still put on the barbs, why risk it :P

[Manuel C]

here is mine, not complete by now, but it will be very soon:) :)

http://countermalucos.com.sapo.pt/corte_topo_2.jpg
http://countermalucos.com.sapo.pt/topo_corte_1.jpg
http://countermalucos.com.sapo.pt/tpo_semfita.jpg
http://countermalucos.com.sapo.pt/topo_fans%2Bgrelha.jpg
http://countermalucos.com.sapo.pt/tudo.jpg
http://countermalucos.com.sapo.pt/cima.jpg
http://countermalucos.com.sapo.pt/conjunto_1.jpg
http://countermalucos.com.sapo.pt/traseira.jpg
http://countermalucos.com.sapo.pt/tudo_1.jpg
http://countermalucos.com.sapo.pt/bomba.jpg
http://countermalucos.com.sapo.pt/bomba_2.jpg
http://countermalucos.com.sapo.pt/closeup_rad.jpg
http://countermalucos.com.sapo.pt/exterior.jpg

=)

[bullit]

Maneliiiii,isso tá uma maravilhaaaa,por acaso podes me dar as medidas??são iguais para todos os 240,sabes?

[afireinside]

Sick job on that top radiator mount man :toast:

I'm not liking the eheim pump or bay res though.

[Manuel C]

nao faço ideia se sao iguais pa todas.(id dont know if they are the same) pra que rad tavas a pensar?(for wich rad were you thinking?) .by the way who are you? (outro nick:D )

[MadMikeSS]

There's a pic back in here somewherehttp://www.xtremesystems.org/forums/showpost.php?p=1224291&postcount=888, but yeah cut out the bottom to match PA160 fin area and put some foam weatherstripping @ hole border, then just put rad on top.

Yeah, that was nicely done, but it's a V1000, not hte V2000 that I have. I could probably do the same, but I need the HD racks in the bottom. It'll have to stay the wya I have it for now.

[Manuel C]

Sick job on that top radiator mount man :toast:

I'm not liking the eheim pump or bay res though.
THANKS it gave me a hell of a job to do it, but it is done=)
the bay res, and the eheim i have to keep with them because there is no money for other pump ou Res.
tomorrow i may put some pics with th WC system mounted, on cpu only, because the mcw55 will come only when money arrives:slapass:

[generics_user]

I recently got my new tubing so it´s time for a post:D

http://img463.imageshack.us/img463/7554/imgp29298un.jpg
http://img458.imageshack.us/img458/7428/imgp29344io.jpg
http://img458.imageshack.us/img458/2620/imgp29203mz.jpg
http://img211.imageshack.us/img211/6184/imgp29233ab.jpg

http://img211.imageshack.us/img211/940/imgp29226rv.jpg

only have to fix this long tube between mobo and graphics

what do you think about it/what shall I change:confused:

PS:most of this systems here look COOOOOOOOL :slobber: :clap:

[generics_user]

Some macros from my system. :)

http://213.202.211.105/gravedigga/pcbilder/waku1.jpg


i bet that there is air inside this cooler as you used the out houle for intake:stick:

would fix that is i where you:rolleyes:

[MaxxxRacer]

Manuel C, looking good, but you might want to get some black screws for the fan grill.

[Manuel C]

Manuel C, looking good, but you might want to get some black screws for the fan grill.
you are completely right. a friend of mine who have a pc component shop, have already those screws =).
today i have already put the DD conectors on the reservoir, and the 3/8 to 1/2 on the Rad. i am just waiting now for the Tygon tube. mcw55 will come later because money , dont grows form the floor :slapass:
Thanks Maxxx, and everyone

[creidiki]

Another thing: the DDC gets a nice kick in performance if you use the top barb in the plexi-top as inlet. No-cost performance upgrade for you :)

[jrw]

Another thing: the DDC gets a nice kick in performance if you use the top barb in the plexi-top as inlet. No-cost performance upgrade for you :)

Thats how i run mine. Makes top-mounted rad easier as well :)

Ill have pics up very soon, of my very first water-cooled rig.

Lian Li PC-7B / BIP2 top mount :)

[generics_user]

thanks will fix that when my triple-rad will come onto top (inside, only have to turn the power-supply by 90 degree so it´s flat:rolleyes: )

but where to take the water-tank i can´t find any place for it (i don´t like that mounting in front of my graphics card)

PS: don´t want to have anything external as i go very often to lanpartys:(

[creidiki]

...just use a t-line. makes it lighter as well, every little helps if youre lugging it to lans :)

[funkflix]

i bet that there is air inside this cooler as you used the out houle for intake:stick:

would fix that is i where you:rolleyes:

How du think it is wrong? :confused:

http://www.techpowerup.com/gallery/23/7.jpg

Just as it must be ... In = In / Out = Out!

[generics_user]

How du think it is wrong? :confused:

http://www.techpowerup.com/gallery/23/7.jpg

Just as it must be ... In = In / Out = Out!
:rolleyes: lol on the other image it wasn´t clear wich hole you used:p:

with the new one everything is a bit clearer:D

PS: how many did you pay for your htf3?

[funkflix]

I think it was about 55€. :)

[generics_user]

...just use a t-line. makes it lighter as well, every little helps if youre lugging it to lans :)
i don´t like this t-lines:stick: , they simply don´t look as good as a tank:(

and 1/2 kilo more or less doesn´t matter:p:

but where to put my tank, i thought between motherboard and drive-bay but that would be a bit sticky there:confused:

[creidiki]

Could just get the Alphacool Res for the DDC, that would give you the same performance increase as using the top barb for inlet...

[Thomas FJ]

#1163 Nope, using the top mouting hole is the best :)
http://h2okoeling.dk/?site=show&id=379&s=13

http://h2okoeling.dk/?site=show&id=379
/Thomas

[creidiki]

Well, there u go. And the Plus is even better than the Pro, no? If i had cash to spare, id buy one just to see how good it is...

[Thomas FJ]

DDC Plus/Ultra/Rev2 is the best :)
Pro is just the normal version with the plexitop...
http://coolercasesuk.co.uk/showthread.php?t=15

Actually the test I linked to before shows that when you are using the front hole as inlet on the DDC Pro it's performance DECREASE compared to the normal version :)
/Thomas

[el rolio]

I accidentally brke off the screw head to one of my Storm's mounting screws, so i devised a new system. So far it works great and is much better for a bare core cuz it forces you to come straight down on it.

http://thecowsaysmoo.org/budwise/pics/Personal/Rebuild-Mount2.jpg

hey homie, can i see more pics of how you ended up mounting it?

and what about contact? the cpu shim isnt getting in yer way?

[el rolio]

Heres my next rig, is a lian li v1000 classic, has a thermochill 120.3 rad in the top, just the cpu and gfx are cooled, but when i get into some money, i will be adding, hopefullly 2 single rads (front and back) and watercooling the FETs, the memory, and the NB! the pump i'm using is an hpps v2.0 (1046 chasis)

lets hope i can get some money together so finish the monster off, anywho, heres the pics :) enjoy:

wow dude, i cant believe im seeing what my case will look like. i just bought a 120.3..... i have the silver classic v1000.... i am about to make a tinted window (and mesh lower area).... i did mod my sunbeam fan controller into a front panel....

just wow. well at least i know it looks GREAT! thanks! :toast:

[generics_user]

DDC Plus/Ultra/Rev2 is the best :)
Pro is just the normal version with the plexitop...
http://coolercasesuk.co.uk/showthread.php?t=15

Actually the test I linked to before shows that when you are using the front hole as inlet on the DDC Pro it's performance DECREASE compared to the normal version :)
/Thomas
mime is a ddc pro-ultra:rolleyes:

the ultra gives you another 180 l/h more with optimal tubing

[Thomas FJ]

mime is a ddc pro-ultra:rolleyes:

the ultra gives you another 180 l/h more with optimal tubing

I wasn't commenting your setup directly ;)
/Thomas

[creidiki]

Well, thats nice then, START USING THE TOP BARB! ;p

Btw, l/h doesent really matter v much, its max head that matters.

[generics_user]

Well, thats nice then, START USING THE TOP BARB! ;p

Btw, l/h doesent really matter v much, its max head that matters.
but litres are the only thing wich stay in this data-sheet what i had, have got no flow-meter here

PS: i´ll start it using when i put a stainless steel plate onto top and a triple-rad inside this case;)

@i saw it later cut i was too lazy to edit my posting

[creidiki]

its good that you dont have a flow-meter. sub-1000$ flowmeters kill your flow.

[el rolio]

its good that you dont have a flow-meter. sub-1000$ flowmeters kill your flow.

hahahahahah! :clap:

[creidiki]

's not really that funny, even the swissflow - the best of the "cheap" flowmeters - will kill 16ft of head at 2gpm :/

http://www.xtremesystems.org/forums/showpost.php?p=1324868&postcount=73

[Turok]

Finally got off my lazy arse and uploaded my pics.

Here she is in all her glory :rolleyes:

http://home.earthlink.net/~g0nz0/sitebuildercontent/sitebuilderpictures/img_3852.jpg



Wow, that looks a lot like my PC :P
Did you copy from me? lol
you can check mine on my sig below

Nice job :up:
Only difference is that my case is smaller, and the tubeings are thinner (1/2")

What a coincidence, Im also getting the same Saitek Red Special Edition keyboard in a few days.
A long time ago I had a Red Deck keybard, but I RMAed it because it was having some issues. When I holded several keys in a series, others would stop working :rolleyes: They said it was unlucky to get a keyboard with a bad driver and that the newer keyboards wouldnt have this problem.

Im also probably going to take off my cr@#$y red CCFL cover and wrap the bulb with red candy wrapping paper so it looks more red. :D

Im thinking about adding the following to my PC:
- Red Saytek keybard $50
- x1900xtx $450 (There was a offer like this in NewEgg. Ill be hunting for another one)
- Maze4 block $50
- New 1/2" tubeing ~$20
- 2x1Gb of a nice, OCable DDR500 Cas 3 RAM for ~$200
- Iwaki MD20RLZ $180 (If I can pull out the money afther all the above :p: )

[generics_user]

's not really that funny, even the swissflow - the best of the "cheap" flowmeters - will kill 16ft of head at 2gpm :/

http://www.xtremesystems.org/forums/showpost.php?p=1324868&postcount=73


i´ve always been a bit skeptic about these fms:)

but when i get 80 euros i´ll buy a t-balancer KTC|edition with some inlines, then i can read out my watertemp the first time:rolleyes:

i also can skip the crappy smartguardian fan-regulation with that thing

i´ve got one more question:

which is the best cooler for an x1800 (gto, when it is avaiable)

i´m thinking of getting a 2nd cpu-cooler and drill out the mounting, then it would fit onto graphics cards (mounting will look so (http://img.clubic.com/photo/00123526.jpg), only newer cooler rev. with finer canals and a better looking top (looks like this internally (http://www.hartware.de/media/reviews/500/4.jpg))

are there any other watercoolers wich are as flat as this one and performs better?

i only know core-temp of my opty 170 which stay at 31 degree under full load, i am too poor for a water-sensor:(

[creidiki]

Ive got a t-balancer. I cut a thin slit into some tubing and slid in a thin thermal probe. I get H2O temps on samurize now ^^"

http://www.xtremesystems.org/forums/showthread.php?t=92628

Do you mean waterblock? MCW60 or MP-1. That doesent look like it has the power to cool an X1800.

[generics_user]

Ive got a t-balancer. I cut a thin slit into some tubing and slid in a thin thermal probe. I get H2O temps on samurize now ^^"

http://www.xtremesystems.org/forums/showthread.php?t=92628

Do you mean waterblock? MCW60 or MP-1. That doesent look like it has the power to cool an X1800.
hmm if it has the power to keep a opty 170 @ 2.6 gig /1.45 volts at 32 ° under full load it should have enough for an x 1800 won´t you think?

it´s not very vood visible on this images but it has a lot of fins (hmm i´ll make some pics when i get it out but it´s as powerful as a nexxos xp and has nearly no flow reduction (well it´s nearly the most powerful cooler which is produced in europe:))


i like that sensor inside this tube :D

[creidiki]

Ah, it looks flat from here. Well, if you can mod it so it fits, i guess itll work well. :)

[generics_user]

Ah, it looks flat from here. Well, if you can mod it so it fits, i guess itll work well. :)
it is pretty flat about 1.5 cm but the cooling-space is huge due to it´s 46 parallel fins that´s why i want to use it on graphics-cards, with 90 ° fittings it will only take 1 extra slot;)

[generics_user]

try to put those cables into your drive-bay;)

[-.-PhanTom-.-]

Which cables?--the ones at the top by the PSU?... no room in drive bays.. all filled up ;)
And besides, they would be long enough to be able to stay in there I think... but might give it a try...

[Gimmpy224]

I got that same case :D

I too need to work on my wiring >_<

But I plan to do that next month when I change out my water.

[Jupiler]

PhanTom :

What temps are you getting with your setup?
I have the Nexxxos XP bold, along with the GP2X-A and HTF2X rad, board is the Expert too, with an X2 3800+ at 2850Mhz, 1.392V.

[-.-PhanTom-.-]

Jupiler>well, I am currently at 2800 (vcore 1.475) with my opty170, idle temp is 24-26, full dual load temp is 37-39

[4Qman]

Thermal Take Armour *Roof MOD*
Pa160 Rad - Thermochill 120.2.
DD TDX - D5 Pump - Maize 4 Chipset & GPU
DD 1/2 Tubing - Thermochill Temp Monitor

http://img101.imageshack.us/img101/6494/dscf13247gt.jpg
http://img95.imageshack.us/img95/4967/dscf13386od.jpg
http://img101.imageshack.us/img101/6152/dscf13259lv.jpg
http://img101.imageshack.us/img101/874/dscf13260zv.jpg
http://img82.imageshack.us/img82/8372/dscf13277pj.jpg
http://img53.imageshack.us/img53/2936/dscf13398vt.jpg

[generics_user]

@ 4Qman: try to put this thermochill onto top (the dual!), that will give you back 5 drive bays and put this single to the backside, you´ll need one fan less and will have nearly no temp growings (you can fit the dual internally too!)

i´ll get a new triple on monday and i´ve got plans to fit it internally on top ba turning the power supply 90° and put the power cord onto the right side (will also make it moreeasy to plug in this damn modular power cords (i´m starting to hate them:( )

the front metal guard looks very good but how about dust?:confused:

[el rolio]

Personally, I like my swiftech better, but that's on my board that's on my autocascade:

http://img74.imageshack.us/img74/958/swifty4su.jpg

oh wait, i was planning on doing this, but supn just occurred to me....

is this a sli-dr or the EXPERT?!!! :eek:

[4Qman]

@ 4Qman: try to put this thermochill onto top (the dual!), that will give you back 5 drive bays and put this single to the backside, you´ll need one fan less and will have nearly no temp growings (you can fit the dual internally too!)

i´ll get a new triple on monday and i´ve got plans to fit it internally on top ba turning the power supply 90° and put the power cord onto the right side (will also make it moreeasy to plug in this damn modular power cords (i´m starting to hate them:( )

the front metal guard looks very good but how about dust?:confused:

Well the PA160 ontop is nicley fitted now, I dont use the Drive mabys mate and i have 2 spare anyway now. :D

I like the mod idea u mention, sounds good and cant wait for the pics. If u have the Armour Case PM me with the pics when u get it done dude.

Also mate the fans are set to blow and the front and suck in from the rear, I have the window open and get good temps like 18-20oC idle on this water setup. So dust is ok. U like the Yellow?

[generics_user]

Well the PA160 ontop is nicley fitted now, I dont use the Drive mabys mate and i have 2 spare anyway now. :D

I like the mod idea u mention, sounds good and cant wait for the pics. If u have the Armour Case PM me with the pics when u get it done dude.

Also mate the fans are set to blow and the front and suck in from the rear, I have the window open and get good temps like 18-20oC idle on this water setup. So dust is ok. U like the Yellow?
yeh i like it, it´s done with an airbrush?

hopely my dad packs out his for brushing my case front black (this silver looks ugly:mad: ). i also have to buy a stainless steel plate for my case top :D

u think power cord to top, right or left is the best?

first i thought right would be the best, but with a bit more modding i could hang it onto top what would look cooler. furthermore i´m a bit afraid of this thin aluminium walls so top mounting into a steel-plate would be much better:rolleyes:

what do you think about?

PS: i love this armor you can do a lot of modding with it, muc better than my old chieftech mesh:p:

[SaFrOuT]

oh wait, i was planning on doing this, but supn just occurred to me....

is this a sli-dr or the EXPERT?!!! :eek:


very clear that it is not the Expert since he got the jumpers needed to switch to SLi

[4Qman]

yeh i like it, it´s done with an airbrush?

hopely my dad packs out his for brushing my case front black (this silver looks ugly:mad: ). i also have to buy a stainless steel plate for my case top :D

u think power cord to top, right or left is the best?

first i thought right would be the best, but with a bit more modding i could hang it onto top what would look cooler. furthermore i´m a bit afraid of this thin aluminium walls so top mounting into a steel-plate would be much better:rolleyes:

what do you think about?

PS: i love this armor you can do a lot of modding with it, much better than my old chieftech mesh:p:

I done the yellow from Tin mate. LMAO, looks good then again it took 2 atemps.:D I used Clear lacker on it after so gives the smooth effect.

Also u mean having the PSU on its side up top. If so i think the Leads would be best R/Hand side mate. Also put the colour UV on the Leads as it makes a big diference.

[generics_user]

mmmh will think over night:(

tomorrow i´ll take my rig to my dad where i´ll mod for 2 days as i havent got a lot of tools at my home;) , so pics will follow monday or so;)

well i think that the heat should exhaust to the top and the ps-fan shzould suck cold air from the back, that should be the best i think and then i don´t have to cut my doors wich are much harder to replace than a top:rolleyes:

[el rolio]

very clear that it is not the Expert since he got the jumpers needed to switch to SLi


hahah thanks, silly me.
i had just really felt like i was TOO excited that i could finally have a GOOD passive solution that didnt require an ugly implementation and massive modding.... i thought it may have been too good to be true... so i wanted to make sure ha

[SaFrOuT]

ya me also

i am searchign for this h/s right now :)

[el rolio]

well post it when you find it homie. im thinkin it IS the swiftie sink they recently released with the fan taken off the top

[s7e9h3n]

well post it when you find it homie. im thinkin it IS the swiftie sink they recently released with the fan taken off the top
Actually, that's the older revision chipset cooler. This is the recent revision one:

http://img506.imageshack.us/img506/5821/expertchiptcooler8jn.jpg

That's on my Expert ;) Here's another one I came up with on my Ultra-D :D :

http://img122.imageshack.us/img122/8982/chipside6na.jpg

http://img238.imageshack.us/img238/9945/back9da.jpg

http://img160.imageshack.us/img160/2182/clearance6ck.jpg

It was made from a passive aerocool vga cooler.

[el rolio]

yea i figured i was gonna cop the new swifite. i jsut need to make sure it will ffit with both my GT's in there. bu it seems like a WAY better course of action for me than :banana::banana::banana::banana:ing with the zalman (ewww)

the heatpipe one looks nice. i was looking at the thermalright -05 one too hmmmz.

/me thinks i need to see all of your cooling solutions for ideas!

[el rolio]

ok, here is what im sayin: the ends of cards have the long heatsink (the one you have upgraded with the copper fins) + large caps
-
http://mail.kilter.com/ftpclients/matthew/sli_web_pt3/images/IMG_7097.jpg
--

so lookin at some pics i can seee that it wont fit in neatly like yours did :( i would have to cut quite a few more pins out from the swiftie sink :(

http://revo21.com/pc/gfx_caps.jpg
--
http://revo21.com/pc/gfx_interferance.jpg


(by teh way, i will be posting updated shots as i redo my loop and go from a 120x2 to a PA 120.3! --- so its not TOTALLY o/t)

[s7e9h3n]

ok, here is what im sayin: the ends of cards have the long heatsink (the one you have upgraded with the copper fins) + large caps


(by teh way, i will be posting updated shots as i redo my loop and go from a 120x2 to a PA 120.3! --- so its not TOTALLY o/t)
Get yourself one of these (my current chipset cooler). You can find them @ performance-pc's, I think.

http://img104.imageshack.us/img104/9137/chipforce3sp.jpg

http://img411.imageshack.us/img411/8994/surface5xr.jpg

Sorry for the OT guys - now back to the WATER :D :p:

[creidiki]

Oooooo that looks nice :o

[generics_user]

I done the yellow from Tin mate. LMAO, looks good then again it took 2 atemps.:D I used Clear lacker on it after so gives the smooth effect.

Also u mean having the PSU on its side up top. If so i think the Leads would be best R/Hand side mate. Also put the colour UV on the Leads as it makes a big diference.
I DID IT!:woot:

well now look how to mount an triple rad internally in an thermaltake armor:slobber: :

top view:
http://img69.imageshack.us/img69/7392/imgp29375ec.jpg
there is about 2 cm space between the rear fan and the power supply which should be enough for most of the radiators:
http://img69.imageshack.us/img69/2748/imgp29384jl.jpg
the rear will get a fan gurad as it isn´t looking very nice...:
http://img239.imageshack.us/img239/5312/imgp29405ce.jpg

well it´s not visible on the first pic but i did remove the whole color of the top as i made some scratches in it, but for me the blank alu looks much better than this ugly silver color:p:

if there is anything to make better tell it, i´ll fix it:)

PS: older pics on page number 47;), and sorry for crappy images, something is wrong with my camera...

[Nettwerk]

LanLi Pc-75B
OCZ Powerstream 600W
DFI Expert mobo
AMD 3800x2 @ 2.8ghz
2gb Mushkin Redline 4000
2 7800GTs SLI
1 x 36Gb raptor
1 x 250gig WD
2 x 300 gig Seagate sata II drives

Swiftech storm block
BIX3
2 Maze 4 gpu blocks
D5 Pump

http://img231.imageshack.us/img231/9740/waterpc7512dm.th.jpg (http://img231.imageshack.us/my.php?image=waterpc7512dm.jpg)
http://img220.imageshack.us/img220/9103/waterpc7527ku.th.jpg (http://img220.imageshack.us/my.php?image=waterpc7527ku.jpg)
http://img80.imageshack.us/img80/1083/waterpc7535et.th.jpg (http://img80.imageshack.us/my.php?image=waterpc7535et.jpg)

[RekLess]

Here are pics of my first WC rig. It worked pretty well - lowered my CPU temps around 4deg C and was able to fit it all in the case with the single BIX rad.

http://i31.photobucket.com/albums/c383/1MEBCarter/3-2-06NewPC001.jpg
http://i31.photobucket.com/albums/c383/1MEBCarter/3-2-06NewPC004.jpg

I decided to upgrade to a PA120.2 and mount the rad outside the case to improve cooling. I am really happy with the performance of this set-up - 4deg lower CPU temps and much better case air-flow.
(Excuse the messy wiring, I need to pick-up some more sleeving and do some more tucking.)

http://i31.photobucket.com/albums/c383/1MEBCarter/3-20-06NewPC001.jpg
http://i31.photobucket.com/albums/c383/1MEBCarter/3-20-06NewPC002.jpg
http://i31.photobucket.com/albums/c383/1MEBCarter/3-20-06NewPC003.jpg

Cooling Impacts (during load):
...........Air Cooling..........Single BIX..........PA120.2
CPU............54...................50............ ........46
GPU's..........68...................46............ ........42

Air cooling was with XP-90 CPU heatsink and Arctic NV5 Silencers.

[CoNMaN]

Got my new Tt Tai-Chi tower:

http://www.conman.se/PICT0231mellan.JPG

http://www.conman.se/PICT0226mellan.JPG

http://www.conman.se/PICT0229mellan.JPG

http://www.conman.se/PICT0222mellan.JPG

It looks great with my samsung 40" lcd

More pic´s @ www.conman.se @ "datorn"

[Sentential]

Here's my box:

http://img.photobucket.com/albums/v180/Sentential/DSC00143.jpg

http://img.photobucket.com/albums/v180/Sentential/DSC00142.jpg

http://img.photobucket.com/albums/v180/Sentential/DSC00156.jpg

[jrw]

Here's my box

What case is that Sent? Looks nice.

Here's my first ever WC rig, based on Lian Li PC-7B. The OCZ 520ADJ is too long :)

DDC Ultra, BIP2, Nexxxos XP, Maze4, ½" Clearflex

http://www.xtremesystems.org/forums/attachment.php?attachmentid=45240&stc=1&d=1143452614

http://www.xtremesystems.org/forums/attachment.php?attachmentid=45241&stc=1&d=1143452652

http://www.xtremesystems.org/forums/attachment.php?attachmentid=45242&stc=1&d=1143452697

[mindwreck]

wow rekless. thats a complete nest of wires. the split loom is suppose to help your cabling. try shoving some wires into the back of the case.

[RekLess]

I agree, it is a mess. I just purchased an OCZ520 PSU to replace the Antec TPII. I plan to spend a weekend modding the new unit to minimize all of the excess wiring. Hopefully this will neaten-up my rig and help air-flow.

[Manuel C]

http://countermalucos.com.sapo.pt/caixa_1.jpg
http://countermalucos.com.sapo.pt/caixa_watercooling-1.jpg

i take of the reservoir and put a T-line:cool:
how is it looking?
thnks over and out

[KoHaN69]

Damn conman, thats nice and clean

[Manuel C]

http://countermalucos.com.sapo.pt/interior%201.jpg
http://countermalucos.com.sapo.pt/interior%202.jpg
http://countermalucos.com.sapo.pt/interior%205.jpg

some more pics:toast:

[Sentential]

What case is that Sent? Looks nice.
Its a Yeong-Yang Minicube :toast:

[Ad1tya]

What are you using to Block your TLine Samuel?

[Manuel C]

who?? me?? LOL i am Manuel ihih

well i am using a acessorie that i have found on a garden-bricolage/shop.
i do not now how to say the correct name in english:slapass:

[eXa]

ok first of! dont laugh!
its a cheap, too small, and :banana::banana::banana::banana:ty q-tec... and a cheap old watercooling witch im
changing over time. it is a original waterchill! but i have changed the fan and radiator to a yate an procore heatercore.
i only have 2 fans. the yate and the 120mm in the fsp power.
i have a new power on the way btw. (mist 500w, dead silent)
so... i think my next change will be a new cpu block!
and im planning on building a case of wood. it will be alot bigger!
http://www.xtremesystems.org/forums/attachment.php?attachmentid=45384&d=1143826809
http://www.xtremesystems.org/forums/attachment.php?attachmentid=45385&d=1143826809

and i need aplause or something for getting a 8mm id\11mm od on a 1\2 fittings:clap:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=45386&d=1143826809

[viper650]

here is my system. disregard the wiring, no one can see it because my case technically shouldnt even have a window in it but i cut two custom ones.

http://i58.photobucket.com/albums/g245/viper651/computerpicture.jpg

http://i58.photobucket.com/albums/g245/viper651/Picture001.jpg

http://i58.photobucket.com/albums/g245/viper651/Picture002.jpg

http://i58.photobucket.com/albums/g245/viper651/tower.jpg

yes, i realize that the cuts are crappy... i used a cutting wheel and didnt have a lot of time to fix everything up. but i really dont care. function > form

[johnanderson]

viper650- you should go to mcmaster.com and order some Push-on Edge Trim to make those cuts look better. either that or electrical tape, which ive used and actually doesnt look half bad

[generics_user]

viper650- you should go to mcmaster.com and order some Push-on Edge Trim to make those cuts look better. either that or electrical tape, which ive used and actually doesnt look half bad
only take a metal-file and 1 hour and every cut seems perfect, the easiest way:p:

[cl4w]

my one :banana:

http://img380.imageshack.us/img380/795/rimg01069fq.th.jpg (http://img380.imageshack.us/my.php?image=rimg01069fq.jpg)

[bullit]

http://img127.imageshack.us/img127/508/dscn7409medium1un.jpg

http://img153.imageshack.us/img153/6176/dscn7375largelargemedium5cp.jpg

[mindwreck]

ooo. now thats a fancy nightclub of a box you got there bullit :D. I like it. you should ahve the uv lights sound sensitive.

[viper650]

viper650- you should go to mcmaster.com and order some Push-on Edge Trim to make those cuts look better. either that or electrical tape, which ive used and actually doesnt look half bad

ive thought about the electrical tape, but im honestly just too lazy to do it. i will soon enough and thanks for the link. ive been wondering where to get the trim

[adeoliver]

Not as purdy as some of the others.

[Hansfragger]

OK here goes!
After a looong time of researching and preparation (1 year on/off researching. 3 month final preparation. 1 month modding and assembly)(yes! I took my sweet, sweet time ;) ) I finally finished my first watercooling setup :) First I would like to thank ALL the people that helped me directly and in-directly to get my rig up and running from here and other forums as well :cool:
All relevant watercooling parts:

- White Water
- MCW20
- MCW50
- 1/2 Clearflex
- 2-342 heater core (2" shroud on both sides)
- 4 Panaflos 120mm L1A push/pull (1 extra for burners)
- Iwaki MD-15RLT (shrouded)
- Lian-Li Pc 70 case (very moded)
- Rest in my sig...

http://img10.imageshack.us/img10/593/2324.jpg
http://img10.imageshack.us/img10/1322/2323.jpg





You did an extremely nice job of routing your tubing. You took your time and it shows.

[Hansfragger]

Hello everybody. This looks like a great forum with a lot of info. Here is my current rig. I have started purchasing components to upgrade to PCI-E. I will post new photos when that is complete.

[JoeBar]

Hello everybody. This looks like a great forum with a lot of info. Here is my current rig. I have started purchasing components to upgrade to PCI-E. I will post new photos when that is complete.
Looks nice! :up:

[el rolio]

EDIT* pics dont work ON MY MAC AT WORK

saw it at home and yea good god man, switch the ports around on the block...

[EnJoY]

work fine.

[Grinch]

thought so maybe his settings are different or perhaps try a different browser? :toast:

[graham_h]

sorry to go off topic but does anyone have a pic of that water block that was on a forklift truck and weighed like half a Ton ?
I can't find it anywhere

[MaxxxRacer]

Grinch for the love of god you ahve the inlet and outlet on the Storm confused.. I even put a special note in several of my guides about that for the storm.. sheehs.. when will ppl start reading..its also in the directions for the storm!

[eXa]

hahaha :clap:

[skaktuss]

:rotf:

[Manuel C]

very nice one bullit :D
it iis a very funny case, and i think it is just perfect ou entao boa cmo marisco:D

[mindwreck]

lol. i just noticed it IS reversed. I looked at the pics several times too. better get that fixed quickly

[OCme]

Dyslexic System...

[Nettwerk]

hehehhe oh no!

[topboy]

Just got her setup - Still need to do cable management. Thinking of getting another PA160.1 in the bottom (Maybe something else...suggestions) to feed the GPU's and maybe a Chipset block to bring noise down. Do you guys think the Lang D5 will do all this or will i be in need of an upgrade......????


http://img.photobucket.com/albums/v614/Topboy/My%20Rig/IMG_0016.jpg

http://img.photobucket.com/albums/v614/Topboy/My%20Rig/IMG_0002.jpg

http://img.photobucket.com/albums/v614/Topboy/My%20Rig/IMG_0005.jpg

http://img.photobucket.com/albums/v614/Topboy/My%20Rig/IMG_0001.jpg

http://img.photobucket.com/albums/v614/Topboy/My%20Rig/IMG_0007.jpg

Enjoy

Topboy

[creidiki]

A 50Z will give better temps with a PA160, because of its much lower heat dump.

If you must cool the NB, get the MCW30 or an Eddy_EK, everything else ive seen is much too restrictive. Not like a NB needs much cooling anyway.

Either pump should do Storm + 2x Maze 4 + MCW30 ok... you can upgrade to 2x 50Z or an iwaki if you want, but if youre that much after performance then i have to question why you want to harm your loop's performance with a NB block in the 1st place.

If silence matters that much to you, just slap another PA160 and the MCWW30 and be done with it, dropping in a bigger pump to counteract the nb block restriction is a bit like saving your breath to cool your soup ;)

[Mankz_91]

for a silent pump go with a Laing DDC- and get a plexi top-

Looking good, but dude, cable management!

[topboy]

for a silent pump go with a Laing DDC- and get a plexi top-

Looking good, but dude, cable management!

LOL...Yeah tell me about it and thats what i do as part of my job...HP Server rack building.

I allways throw things in.....then tweak after....Cable Man is allways last to get done.

OK so NB cooler is out....but i do want to throw another Rad in so i can cool the second GPU down.

Been watching the temps and when in this series... RAD -> Pump -> CPU -> GPU1 -> GPU2 -> RES....I am getting a difference under idle and load of 4 to 6C higher on GPU2.

So my idea is to feed the GPU2 with its own RAD.

How will this affect flow with the D5 in or should i uprate pump. Need to be able to buy in the UK.

Thanks

Topboy

[danstar25]

nice rig topboy......what camera are u using to make those beautiful pics?

[topboy]

nice rig topboy......what camera are u using to make those beautiful pics?

My other new toy....Canon EOS 30D SLR with EFS 17-85 Lens :D

Review here :

http://www.dpreview.com/reviews/canoneos30d/

Topboy

[davidian]

My first WC.

Pump: Laing DDC 1T
CPU: PowerX rev.2
GPU: Abadon PRO
Radiator: BIX2

Innovatek, Camozzi, and reservoir.

http://img439.imageshack.us/img439/4471/16ys.jpg

http://img328.imageshack.us/img328/3200/23dn.jpg

http://img328.imageshack.us/img328/7018/16kb.jpg

http://img328.imageshack.us/img328/3255/32at1.jpg

[Ssilencer]

@itor Vga and DM-11 cpu block
@itor custom radiator



http://img148.imageshack.us/img148/1108/ipodnano0091re.jpg
http://img148.imageshack.us/img148/428/ihs027small25zy.jpg
http://img487.imageshack.us/img487/8213/ipodnano014small6fu.jpg

[OCme]

Se ve muy bien mi amigo! :D

That looks great my friend! :D

[OCme]

:cool: Here are a few pics of my daily driver...

[sTaBZz]

davidian, u got a link to that cpu waterblock of yours? i think it looks sexay :banana:

[Ssilencer]

Se ve muy bien mi amigo! :D

That looks great my friend! :D

LOL, how are you friend!

Nice rig you have there, I love the pc70 in black, my little pc65 is, well, too little :(

[davidian]

davidian, u got a link to that cpu waterblock of yours? i think it looks sexay :banana:

PowerX is a limited series waterblock from Poland.

It is currently unavailable.

But, look at maker's page:
click (http://piter.mily.pl/)

[OCme]

LOL, how are you friend!

Nice rig you have there, I love the pc70 in black, my little pc65 is, well, too little :(

Bien,bien amigo y tu???... me gusta tu caja. Mi caja pasada fui un Lian-li PC65 tambien...

I'm doing well my friend, and you???... I like your case. My last case was a Lian-li PC65 also...

[Ssilencer]

Veo que estas usando una 50z a 13,8v que tanto mejora? no acorta la vida util?
Abandonaste el phase change?
I see you are using a 50z@13.8v, is that not risky for the pump?
Missed you from the vapor forum

[creidiki]

13.8v is fine for it... gives it the best performance. though it probably wont last as long as it will @ 12v, but *shrug*. It'll give you nearly the same temps as an MD-20 like that...

[Ssilencer]

IIRC I saw sometime ago a graph comparing the pump at 12 and at 13.8v, can anyone post that graph?

[creidiki]

This thread?

http://forums.procooling.com/vbb/showthread.php?t=10825

[Grinch]

Grinch for the love of god you ahve the inlet and outlet on the Storm confused.. I even put a special note in several of my guides about that for the storm.. sheehs.. when will ppl start reading..its also in the directions for the storm!


DOH.....will have that fixed this weekend...also changing a couple parts as well...got a thermocill PA120.2 coming as well as some 1/2" tygon tubing

[knob]

those are sexy rigs!

[santica]

http://img107.imageshack.us/img107/7083/p10100097bv.th.jpg (http://img107.imageshack.us/my.php?image=p10100097bv.jpg)

- Above the normal look on my Guitar And PC sanctuary

http://img106.imageshack.us/img106/9335/p10100123xs.th.jpg (http://img106.imageshack.us/my.php?image=p10100123xs.jpg)

- "Must Have" nightly mode

http://img140.imageshack.us/img140/1793/p10100102mu.th.jpg (http://img140.imageshack.us/my.php?image=p10100102mu.jpg)

- Extra Radiator and reserator with 120mm Fan,

[bullit]

A little update:

http://img134.imageshack.us/img134/659/dscn74536bd.jpg



http://img134.imageshack.us/img134/5540/dscn74580ju.jpg

http://img101.imageshack.us/img101/9504/7horasdeprimemedium5pq.jpg

[Thomas FJ]

A little update:

http://img134.imageshack.us/img134/659/dscn74536bd.jpg

Which rad grill are you using?
RadGrillZ?
/Thomas

[bullit]

AC Ryan...you can see it here.

http://www.acryan.com/_radgrillz/index.shtml

[Mrshadow]

first w/c set up

[Alexisferos]

http://img91.imageshack.us/img91/3228/hpim03554dt.th.jpg (http://img91.imageshack.us/my.php?image=hpim03554dt.jpg) http://img520.imageshack.us/img520/595/110yl.th.jpg (http://img520.imageshack.us/my.php?image=110yl.jpg) http://img520.imageshack.us/img520/1470/53cs.th.jpg (http://img520.imageshack.us/my.php?image=53cs.jpg) http://img520.imageshack.us/img520/9816/38wb.th.jpg (http://img520.imageshack.us/my.php?image=38wb.jpg) http://img41.imageshack.us/img41/3417/147wl.th.jpg (http://img41.imageshack.us/my.php?image=147wl.jpg)

radiator ford transit 87 modded 1/2'' ,
hydor l20 (700 l/h) modded 1/2'',
blocks and tank are hand made by eleven (11)
cpu block 11 universal
gpu block 11 universal
res by 11

[damstr]

http://img.photobucket.com/albums/v496/damstr/DSC01500.jpg
http://img.photobucket.com/albums/v496/damstr/DSC01496.jpg
http://img.photobucket.com/albums/v496/damstr/DSC01501.jpg

[EnJoY]

A little update:

http://img134.imageshack.us/img134/659/dscn74536bd.jpg



http://img134.imageshack.us/img134/5540/dscn74580ju.jpg

http://img101.imageshack.us/img101/9504/7horasdeprimemedium5pq.jpg

What DVD Burner is that bullit?

[vkbms]

http://img.photobucket.com/albums/v496/damstr/DSC01500.jpg

Could you post some inside pics?

[FourDoors]

Could you post some inside pics?
curiosone :D :D :D

[vkbms]

mo vedi che te combino.... :banana:


I'll have some interesting project.... :D

[einCe]

not exactly a case but..
http://img205.imageshack.us/img205/2117/water0036zj.th.jpg (http://img205.imageshack.us/my.php?image=water0036zj.jpg)
http://img205.imageshack.us/img205/550/water0040gd.th.jpg (http://img205.imageshack.us/my.php?image=water0040gd.jpg)
gonna get some wormdrives or mabe some pi-thons soon, those plastic clamps are driving me nuts

[Makubex_GB]

My new setup:

http://img216.imageshack.us/img216/4449/pic0294si.jpg

http://img224.imageshack.us/img224/7241/pic0301ls.jpg

http://img268.imageshack.us/img268/1903/sideview9ep.jpg

http://img224.imageshack.us/img224/4375/pic0319ci.jpg

http://img146.imageshack.us/img146/6093/pic0270ps.jpg

[FourDoors]

excuse me, the mcp655/ dangerden d5 can work also in orizontal without problems?

[maratus]

excuse me, the mcp655/ dangerden d5 can work also in orizontal without problems?
Yes, but inlet shouldn't be below pump

[Makubex_GB]

Yes, but inlet shouldn't be below pump
Exactly. Any position is ok, except the inlet below the pump. :)

[FourDoors]

sure.
thank you very much.

Hi from Italy:)

[bullit]

What DVD Burner is that bullit?It´s a Pioneer 109 XL

[pilota]

sure.
thank you very much.

Hi from Italy:)
ciao ALE
tino;)

[FourDoors]

ciao ALE
tino;)
ciao tino, invasione italiana :toast:

[TEkNØ]

ciao ragazzi!:D

[EnJoY]

It´s a Pioneer 109 XL

Is that a custom faceplate I see on it in your pictures or just a special version of it?

[bullit]

Check this out...http://www.pioneerelectronics.com/pna/product/detail/0,,2076_17573091_207918120,00.html?compName=PNA_Pr oductDetailComponent

or this


http://www.cdrlabs.com/reviews/index.php?reviewid=260&page=Features

or this with the black front lik mine,i´m afraid no longer available this burner with a Lian li face.

http://www.burnworld.com/dvd-burner/pioneer-dvr-a09xlbbk.htm

[damstr]

Could you post some inside pics?
sorry, here you go:
http://img.photobucket.com/albums/v496/damstr/IMG_0181.jpg

[haste]

some nice rigs in this thread...


finished my build last week. i just got some triple blade delta fans to put on my thermochill rad on top and will be changing the sleeve color to black instead of green. other than that its all done.

[vkbms]

thanks damstr.....
i'll upload my pics soon :)

[Shakermaker]

Hey,

okay I've made some changes. Here we go...

http://www.forumdeluxx.de/gallery/uploads/8009/Kiste1.JPG

http://www.forumdeluxx.de/gallery/uploads/8009/Kiste2.JPG

http://www.forumdeluxx.de/gallery/uploads/8009/Kiste3.JPG

http://www.forumdeluxx.de/gallery/uploads/8009/Kiste4.JPG

http://www.forumdeluxx.de/gallery/uploads/8009/Kiste5.JPG

http://www.forumdeluxx.de/gallery/uploads/8009/Kiste6.JPG

[Aldy402]

here it is, specs in sig, sorry for the bad pics (cell phone camera)
http://img145.imageshack.us/img145/6541/dsc002118vk.jpghttp://img252.imageshack.us/img252/2141/dsc002069ys.jpg
http://img252.imageshack.us/img252/983/dsc002098pa.jpghttp://img252.imageshack.us/img252/3739/dsc002108gf.jpg

[Hypno Toad]

Aldy402 what is that for orange fan you and many others use?

Shakermaker does you really need a passive "rad" AND a trippel?

[Aldy402]

Aldy402 what is that for orange fan you and many others use?

Shakermaker does you really need a passive "rad" AND a trippel?

its a cooler master uv reactive 120mm fan, i use it to cool the hot ballistix ram

[Shakermaker]

Well I've tried to get really good temps and so I ordered an Alphacool CORA 442 passive rad too. The temps are quite impressive now and thats what I wanted.
But I'm looking forward to replace my DDC+ with a D5.

[creidiki]

Why? The DDC+ is the better pump... more head, less heat dump, quieter...

[Shakermaker]

Alphacool has new Revision od the D5. So I'd like to test it.
So we will see which pump is the better one, but thanks for your advise.

[creidiki]

Oh, the vario. Well, i guess itll be interesting to see what gives you the best temps, but even if they managed ti give it the same head as a DDC+ with top inlet, i dont see how they can solve the rather high heat dump.

I mean, if its like 5-6W higher than the old D5 itll be nearly as high as an Iwaki RD-30, and thats got 33ft head.

Keep us updated.

[MaxxxRacer]

Shakermaker, adding another rad will decrease your performance.. your system is already insanely restrictive and adding more equipment to it wont help you.

btw, you ned to add ALOT of corrosion inhibitor to your loop if you havnt already done so. You have VERY large surfaces of aluminum and copper intermingling and it will end poorly if you dont prepare for it.

[Shakermaker]

Thanks creidiki.
I'll check it out.
Radical_53 is a friend of mine and together we are going to test some pumps. After that we will have some nice results and based on that I will come to a conclusion.

@Darth Water
I use Water Wetter and I have no problems with corrosion. But thanks for your comment.

[Radical_53]

Maybe you could swap the passive rad for another active one... just a thought. That would also shorten your tubing which looks quite long here and there... maybe there's some room left for optimization.
Still I like the style, looks very clean with the matching silver components and such.

[JoeBar]

Still I like the style, looks very clean with the matching silver components and such.
I agree. At least it looks cool! :)

[situman]

Well I've tried to get really good temps and so I ordered an Alphacool CORA 442 passive rad too. The temps are quite impressive now and thats what I wanted.
But I'm looking forward to replace my DDC+ with a D5.

I suggest you just ADD another DDC+ instead of replace. You are seriously at the limit in terms of pumping power with all those hardware. Adding another one will push this pump or the D5 over its limits. You need TWO pumps to get good temps. Use Pentosin since ur mixing all kinds of metal.

[haste]

finished rig...at least until i get my 165 i ordered from monarch the other day...

[JoeBar]

finished rig...at least until i get my 165 i ordered from monarch the other day...
Looks very nice! :up:

[SiGfever]

This is my first attempt at water cooling. :toast:

http://img279.imageshack.us/img279/4421/img0999medium5ws.jpg

http://img134.imageshack.us/img134/24/img1000medium8rt.jpg

http://img279.imageshack.us/img279/8947/img1001medium9ib.jpg

http://img134.imageshack.us/img134/641/img1002medium9rv.jpg

http://img279.imageshack.us/img279/3871/img1003medium7ds.jpg

http://img279.imageshack.us/img279/7330/img1004medium9cf.jpg

http://img134.imageshack.us/img134/8486/img1005medium6nr.jpg

http://img134.imageshack.us/img134/2887/img1006medium2oe.jpg

[en4cer]

Very nice setup there SIGfever, I have that same case, i think they look great :D

[Alex41290]

Damn :eek: thank god for Tygon, eh?

Here is my current setup, will update when Maze4 GPU top comes in from DD.

http://www.clandfa.clanservers.com/h2opic.JPG

[Aramdin]

This is my first post here @ XS :D

This was my old system, housed in an Yeong Yang 0420. I sold it when I was done with watercooling, then got back to air. Finally water started crawling up my sleeve again & I'm back on water haha!

http://www.xs4all.nl/~ramdinrs/System/System.jpg

This is my new system

http://www.xs4all.nl/~ramdinrs/System/Img_1626.jpg

[blind_ripper]

gone post pics that i have at this momment ;)
setup running on a lan
http://i3.photobucket.com/albums/y90/blind_ripper/Afbeelding020.jpg
the full tower normal what it must be
http://i3.photobucket.com/albums/y90/blind_ripper/DSC07309.jpg
bloks for my x1900xtx ready , but its in rma now ;)
http://i3.photobucket.com/albums/y90/blind_ripper/IMG_0820.jpg
if u have something to ask shoot me :p

[vkbms]

http://img107.imageshack.us/img107/698/img04536on.jpg

http://img107.imageshack.us/img107/8961/img04562cm.jpg

http://img107.imageshack.us/img107/1314/img04601ng.jpg

http://img46.imageshack.us/img46/8632/img04683wh.jpg

http://img46.imageshack.us/img46/2434/img04639gg.jpg

http://img46.imageshack.us/img46/6066/img04619rq.jpg

http://img46.imageshack.us/img46/1655/img04708nb.jpg

[Leon939]

WB made in VN :D

http://img235.imageshack.us/img235/699/dsc03452a6iu.jpg

http://img73.imageshack.us/img73/6779/dsc03478a3bg.jpg

http://img73.imageshack.us/img73/2171/dsc03479a5ag.jpg

[funkflix]

Little update here. :)

Changed to a Laing DDC, from a Eheim 1046 and removed the second hdd case.

http://213.202.211.105/gravedigga/pcbilder/ohneblitz.jpg

[bullit]

Little update here. :)

Changed to a Laing DDC, from a Eheim 1046 and removed the second hdd case.

http://213.202.211.105/gravedigga/pcbilder/ohneblitz.jpg
were's the friggin radiator?

[funkflix]

Just a klick on my signature! :D

1 x Evo 240 and 1 x HTF3 Dual.

[greatscott68]

This is my machine...

[Chicco85]

This is my solution:

http://img227.imageshack.us/img227/9255/p33000367cq.th.jpg (http://img227.imageshack.us/my.php?image=p33000367cq.jpg)

http://img227.imageshack.us/img227/6914/p33000391at.th.jpg (http://img227.imageshack.us/my.php?image=p33000391at.jpg)

http://img457.imageshack.us/img457/5310/p33000423mq.th.jpg (http://img457.imageshack.us/my.php?image=p33000423mq.jpg)

The radiator, is on the top. ;)

P.s: sorry for the quality..:slap:

[vkbms]

This is my solution:

The radiator, is on the top. ;)

P.s: sorry for the quality..:slap:



Italians do it better


:p:

[Chicco85]

Italians do it better


:p:

Parole sante!:woot:

Italian components, Italian owner... :banana:

:D

[pilota]

Parole sante!:woot:

Italian components, Italian owner... :banana:

:D
quoto
ciao
tino:)

[el rolio]

check it out, i put in the final choice optie of my 3, refined my fan wiring and took some pics. here is the gallery

r3vo+pc ºº Thermochill PA 120.3 Loop Upgrade ºº (http://mail.kilter.com/ftpclients/matthew/PA_web/)

and a few choice pics:

http://img141.imageshack.us/img141/1936/8047inside7kg.th.jpg (http://img141.imageshack.us/my.php?image=8047inside7kg.jpg)
--
http://img519.imageshack.us/img519/9149/8063insideclsd1ej.th.jpg (http://img519.imageshack.us/my.php?image=8063insideclsd1ej.jpg)
--
http://img301.imageshack.us/img301/3710/8065insidecloser1my.th.jpg (http://img301.imageshack.us/my.php?image=8065insidecloser1my.jpg)
--
http://img301.imageshack.us/img301/1369/8072firstrun7lm.th.jpg (http://img301.imageshack.us/my.php?image=8072firstrun7lm.jpg)
--
And finally: the shot on the kitchen table: showing the hot and cold sides of the rad water temps on the aquaero as well as the temps in bios on startup. CABQE for the win!
http://img519.imageshack.us/img519/9353/8073r3vo0js.th.jpg (http://img519.imageshack.us/my.php?image=8073r3vo0js.jpg)

:D !

[Alex41290]

Got my Maze4 GPU block yesterday.

I have it all set up now:

http://img215.imageshack.us/img215/9849/img1525medium7bb.jpg

:cool:

[jaguarking11]

Italians do it better


:p:

True but Americans do it best......:D

[bullit]

Well guys that's all true but i think you're running out of the thread matter.:)

[mika123]

Hello all :)

i'm french :D so excuse my english :s

It's my computer :

http://pix.nofrag.com/bd/b2/38fa3534edc384e9263b123d88a8t.jpg (http://pix.nofrag.com/bd/b2/38fa3534edc384e9263b123d88a8.html)

http://pix.nofrag.com/83/6e/8093e1c06772104acb655aac656ft.jpg (http://pix.nofrag.com/83/6e/8093e1c06772104acb655aac656f.html)

http://pix.nofrag.com/d4/32/5dc8a59d93b1f0db5151e94316abt.jpg (http://pix.nofrag.com/d4/32/5dc8a59d93b1f0db5151e94316ab.html)

http://pix.nofrag.com/a5/29/c4ff8a896f43da1ef5f44f83835ft.jpg (http://pix.nofrag.com/a5/29/c4ff8a896f43da1ef5f44f83835f.html)

http://pix.nofrag.com/3e/b5/f48bd1f43d75ddf7270b9de4b619t.jpg (http://pix.nofrag.com/3e/b5/f48bd1f43d75ddf7270b9de4b619.html)

http://pix.nofrag.com/be/f1/2c9dd90dd7026bf96080a4fc2828t.jpg (http://pix.nofrag.com/be/f1/2c9dd90dd7026bf96080a4fc2828.html)

http://pix.nofrag.com/7a/45/f55ca10d3e42b67e29a33631a47ct.jpg (http://pix.nofrag.com/7a/45/f55ca10d3e42b67e29a33631a47c.html)

http://pix.nofrag.com/bb/73/e81daad0da403476c102db793e81t.jpg (http://pix.nofrag.com/bb/73/e81daad0da403476c102db793e81.html)

http://pix.nofrag.com/f3/dd/cde4b57c7c0958030159d2a59fe7t.jpg (http://pix.nofrag.com/f3/dd/cde4b57c7c0958030159d2a59fe7.html)

http://pix.nofrag.com/6e/ec/441b19b6054c934ad047bef88bd3t.jpg (http://pix.nofrag.com/6e/ec/441b19b6054c934ad047bef88bd3.html)

http://pix.nofrag.com/72/cc/056b279cee3ce53a2bbc07236ab5t.jpg (http://pix.nofrag.com/72/cc/056b279cee3ce53a2bbc07236ab5.html)

-Waterblock CPU 1A-SL3 AMD Socket 754 / 939 / 940 1A-Cooling
-WaterBlock VGA NexXxoS GP2X-N GeForce Alphacool
-Radiateur NexXxos Pro III Alphacool
-Tuyau PVC souple transparent 8mm interne, 10mm externe (Au mètre)
-Embout Métal Droit 1/4" pour tuyau 8mm
-Colorant Réactif aux UV Bleu
-Ultra Quiet Amber Fan 120*120mm AK-183-L2B 18dB, 45 CFM, connect. 3 pins carte mère + Adapt 4 pins + Vis Akasa
-Relais de démarrage pour pompe Eheim

Config :

CPU : A64 3000+ @ 2.7ghz (1.68v)
Mobo : DFI Lan Party Ultra-D
Memory : 512 Xms Xpert XL @ 300mhz (3-4-4-8) change by 2*512 OCZ Platinum Edition PC3500 @ 243mhz : 2.5-3-2-5 1T
CG : 6600GT TDH Leadtek

Temperatures :
Cpu : IDLE : 29° // FULL : 43° by prime95 and UT2004
Gpu : IDLE : 45° :/ // Full : ?

So, that you do think of it?

[Zeus]

Awesome setups guys! :up:

El Rolio, your setup looks very cool but i hate the res hanging all loose.

Alex, very nice setup as well but can't you push the tube a bit further on that T- piece?

[el rolio]

Awesome setups guys! :up:

El Rolio, your setup looks very cool but i hate the res hanging all loose.


yes. the MAIN weakness. i have taken the camera home from work every way this week thinkin i would take another pic if i fix wiring more or i fix the res situation, but i havent yet. so by monday night there will be a fix goddmanit. even if i have to go buy velco strips to do it! (wasnt some to come with it?) i tried using hte intake fan holes but it wasnt worth it hmmmz

[james111]

Mika123, what's up with that blue fan sitting on the harddrive? doesn't look like it's doing much other then providing light :stick:
http://pix.nofrag.com/7a/45/f55ca10d3e42b67e29a33631a47c.html

[[XC]Atomicpineapple]

Mika123, what's up with that blue fan sitting on the harddrive? doesn't look like it's doing much other then providing light :stick:
http://pix.nofrag.com/7a/45/f55ca10d3e42b67e29a33631a47c.html


Extra HDD cooling maybe?

[james111]

Extra HDD cooling maybe?
But I mean, how can it be cooling anything if it's flat against the harddrive :confused:

[creidiki]

Sweet fek all, especially as the top of the hard drive is very thin, and heat in a drive travels through the base, then the sides, and finally the top...

[mika123]

Extra HDD cooling maybe?

Yes it is a fan, but I do not still have him(it) to heighten

[yuckfou]

the blue leds kinda clashes with the ram led.

[Alex41290]

Alex, very nice setup as well but can't you push the tube a bit further on that T- piece?

If I honestly felt like completely obliterating my hands after having trouble getting it over the fittings for the blocks, I would have gladly done so. But putting it on that far was a nice walk in the park, so I chose that route. I will probably push it on a bit more shortly. :slap:

[Sentential]

I kept getting aweful contact with my GPU so I went ahead and re-did my loop and so far its much much better (8C drop in GPU temps)

http://img.photobucket.com/albums/v180/Sentential/DSC00161.jpg

[safan80]

Sentential
those 90 degree bends are bad. temps should improve more if you got rid of them.

[krylon]

Thought I would add my system to the thread. You guys have great systems. My components are in my sig. Spacing was a bit tight and I had to modify my old school Antec case a bit like moving the power supply down in front. The front bezel does fit nicely since I cut a hole for the power cord run, but the PSU overheats with it on. The airflow for the case has been completely reversed as well with air coming in from the rear and exhust through the front and top.

http://img76.imageshack.us/img76/8730/sspx01474lv.th.jpg (http://img76.imageshack.us/my.php?image=sspx01474lv.jpg)

http://img221.imageshack.us/img221/5781/sspx01488yx.th.jpg (http://img221.imageshack.us/my.php?image=sspx01488yx.jpg)

http://img76.imageshack.us/img76/1289/sspx01508vp.th.jpg (http://img76.imageshack.us/my.php?image=sspx01508vp.jpg)

[Bail_w]

Elbows are killing the flow of your loop. get rip of them

[JoeBar]

Here's my setup.

http://img124.imageshack.us/img124/6520/dsc002195uk.th.jpg (http://img124.imageshack.us/my.php?image=dsc002195uk.jpg)

http://img135.imageshack.us/img135/6248/dsc002215wp.th.jpg (http://img135.imageshack.us/my.php?image=dsc002215wp.jpg)

http://img135.imageshack.us/img135/2240/dsc001900th.th.jpg (http://img135.imageshack.us/my.php?image=dsc001900th.jpg)

http://img124.imageshack.us/img124/2463/dsc001840ku.th.jpg (http://img124.imageshack.us/my.php?image=dsc001840ku.jpg)

[Thomas FJ]

Here's my setup.


Nice system!

How are your temps?
/Thomas

[JoeBar]

Nice system!

How are your temps?
/Thomas
I'm getting 33'C idle 43'C load with 24'C room temp. 940 @ 4.52ghz with 1.45v.
7900GTX's temp is 34'C idle, 41'C load but still on stock, hadn't time to oc it. ;)

[cool_dude]

Latest addition to the gallery :) Many thanks to creidiki very supportive and answered all my questions without making a fuss and helped me alot! thanks! :) :toast:

Pic 1:
http://img283.imageshack.us/img283/8563/29om2.jpg

Pic 2:
http://img337.imageshack.us/img337/3002/50pt.jpg

Pic 3:
http://img337.imageshack.us/img337/5092/64qz.jpg


Temps:
5v fan on BIX 120.1 - 29 Idle, 38 Load (Prime/Games)
12v fan on BIX 120.1 - 29 idle, 36/37 Load.

Prefer it on 5v ovbiously, lol dont fancy hearing 125fm 24/7, however i expected it to be better than 1-2c....(i have it pulling air thru the rad)]



thx,

c_d

Will add a night shot when i get sime time too :)


Thanks,
c_d

[creidiki]

heh, yw.

1-2c, huh. that quite low. interesting. well, i wouldnt bother with anything but 5v then, i doubt those 2c will give you better OCs.

[badhabit]

Here's my setup.

http://img124.imageshack.us/img124/6520/dsc002195uk.th.jpg (http://img124.imageshack.us/my.php?image=dsc002195uk.jpg)

That is a really bright green - but I can't tell, are the tubes UV or is it just the liquid?

[haste]

Here's my setup.


Nice setup joe! :toast:

[JoeBar]

That is a really bright green - but I can't tell, are the tubes UV or is it just the liquid?
The liquid.

Thanks haste! :toast:

[Mayk-Freak]

This is my LIANLI watercooled

http://img520.imageshack.us/img520/638/pict04659hv.jpg (http://imageshack.us)

http://img199.imageshack.us/img199/5827/pict04772ek.jpg (http://imageshack.us)

http://img447.imageshack.us/img447/2694/pict04663tj.jpg (http://imageshack.us)

http://img199.imageshack.us/img199/7299/pict04720tr.jpg (http://imageshack.us)

[turok_t]

So here are some pics from a few of my rigs. Im still revising my current rig right now but ill post pics when im done.

http://i64.photobucket.com/albums/h167/turok_t/IMG_6557.jpg

http://i64.photobucket.com/albums/h167/turok_t/DSC01512.jpg

http://i64.photobucket.com/albums/h167/turok_t/IMG_1404.jpg

http://i64.photobucket.com/albums/h167/turok_t/CA4F0B27.jpg

http://i64.photobucket.com/albums/h167/turok_t/DSC01510.jpg

http://i64.photobucket.com/albums/h167/turok_t/IMG_1454.jpg

http://i64.photobucket.com/albums/h167/turok_t/7900GT28.jpg

http://i64.photobucket.com/albums/h167/turok_t/7900GT34.jpg

http://i64.photobucket.com/albums/h167/turok_t/IMG_6554.jpg


AMD 64+ 3700 San Diego (0515 SPMW) @ 2860mhz
DFI nF4 LanParty UT SLI-DR
OCZ EL DDR PC-3200 Dual Channel Platinum Rev 2 (2x512 MB) 2.5-3-3-7 @ 1T
2 x eVGA 7900GT CO Superclocked @ 577/907 with OCZ Copper ram sinks
OCZ GameXstream 700W
Hauppage WinTV-GO-FM
2 x Hyundai L90D+ 19" 8ms
Western Digital 200GB 7200RPM SATA
Western Digital 34GB 10000RPM Raptor SATA
Sony DRU-500A
Toshiba SD-M 1712
Swiftech MCR220 Black (2x120mm SilenX)
Swiftech #676 1/2" Dual 120mm High Flow Radiator (2x120mm SilenX)
Swiftech MCP600 v2.0 Inline 12v 160GPH Pump
Swiftech Apogee
2 x Swiftech MCW60 GPU Waterblock
VANTEC ICEBERQ COPPER CHIPSET
VL System L.I.S. 2
Coolermaster Musketeer 2 (LLC-U03)
Antec P160 with Clear Side Panel

Idle/Load = 30C-33C/38C-39C

[kiwi]

I have all my hardware on the table :D

Average pump + swiftech MCW6000 (cpu) + DD Maze4 Acetal (gpu). 5C better than big typhoon and around 50C! better than stock x1900xtx cooler. With triple rad and better pump there would be bigger difference obviously

http://www.xtremesystems.org/forums/attachment.php?attachmentid=47215&stc=1&d=1147784854
http://www.xtremesystems.org/forums/attachment.php?attachmentid=47216&stc=1&d=1147784854

[vkbms]

turok_t very very nice setup...

the tubing in the last pics is beautiful....is an uv additive or simply an uv tubing?

[=ACID RAIN=]

Might as well add mine :D
http://gallery.arsr-clan.com/albums/userpics/10001/a64_1.jpg

http://gallery.arsr-clan.com/albums/userpics/10001/x850xt_vmod2.jpg
edit: host is screwing up dns so I rerouted.

[Brandon_Tyler]

Very clean AR. my old setup was almost identical.

[turok_t]

turok_t very very nice setup...

the tubing in the last pics is beautiful....is an uv additive or simply an uv tubing?


Thanks for your compliments, appreciate it. Its a UV blue dye.. If no UV source is present, the water looks simply clear. IF u look at the bottom left corner of the pic, u can see that the tube gradually goes back to clear.

[delas52]

http://img227.imageshack.us/img227/97/mypc238wc.jpg

http://img326.imageshack.us/img326/4843/mypc216lr.jpg

http://img179.imageshack.us/img179/2400/mp45rm.jpg

http://img513.imageshack.us/img513/7577/mp30me.jpg

http://img513.imageshack.us/img513/9850/mp29ke.jpg

http://img179.imageshack.us/img179/4315/mp14yw.jpg

[Leeum]

=ACID RAIN=: The T-Line should be before the inlet of the pump ;)

[Alexisferos]

=ACID RAIN=: The T-Line should be before the inlet of the pump ;)
yes but if you think it well it is before the inlet of the pump :p:

[npk]

I have all my hardware on the table :D

Average pump + swiftech MCW6000 (cpu) + DD Maze4 Acetal (gpu). 5C better than big typhoon and around 50C! better than stock x1900xtx cooler. With triple rad and better pump there would be bigger difference obviously

http://www.xtremesystems.org/forums/attachment.php?attachmentid=47215&stc=1&d=1147784854
http://www.xtremesystems.org/forums/attachment.php?attachmentid=47216&stc=1&d=1147784854

Cool, where did you get that rad?

[aca]

Any way I could make a picture of my rig under UV light without colors becoming messed up?

[MaxxxRacer]

Mayk-Freak that is one hell of a case mod.

[aca]

here's mine:
http://img469.imageshack.us/img469/3609/imgp103327oz.th.jpg (http://img469.imageshack.us/my.php?image=imgp103327oz.jpg)
more pics here:
http://www.xtremesystems.org/forums/showthread.php?t=98975

[npk]

Next time can you use the flash? Can´t see anything inside there, and it looks interesting.

[skaktuss]

Kiwi, why didnt you buy my tripple rad, when you had a chance? that aluminium rad is real piece of :banana::banana::banana::banana:.

[kiwi]

I know :slapass: :D

I thought I wouldn't use WC anymore

[2cpu]

Lets show my poor w/c pc me too.:)
Is not finish yet, few details left wich the most
important is the bios flash.
http://img115.imageshack.us/img115/196/p32100771xf.th.jpg (http://img115.imageshack.us/my.php?image=p32100771xf.jpg)

http://img468.imageshack.us/img468/9647/p32100798lp.th.jpg (http://img468.imageshack.us/my.php?image=p32100798lp.jpg)

[vkbms]

Thanks for your compliments, appreciate it. Its a UV blue dye.. If no UV source is present, the water looks simply clear. IF u look at the bottom left corner of the pic, u can see that the tube gradually goes back to clear.


could you tell me ehat uv dye is? In italy i can't find anything like this.... only uv stuff that get dirty the tube....

[creidiki]

I dunno, i like the WW, its still a great block... just shorten the double tubing between the WW and Y, and you should be able to go with tube instead of the 90 degree.