Water Cooled Case Gallery

[Pedalmonkey]

Got EK??

[Ric2L]

Here's a quick picture I took of my rig I finally finished. Maybe I'll make a thread with more pictures of the process and all. I had everything prepared for a second loop too, but I'll likely be replacing the GX2 soon, so it will have to wait until I get a new video card.

EVGA 9800 GX2
C2D E6700
Asus Blitz Formula
2x1GB Crucial Ballistix PC8500
WD6400AAKS
Corsair HX620
Lian Li PC-A70B

D-Tek FuZion
Swiftech MCW30
Thermochill PA120.3
D-Tek dB-1
Swiftech Micro res

http://i38.photobucket.com/albums/e119/LordBrona/b56473bd.jpg

Raxxath, where did you get the side panel for your Lian Li PC-A70B, I really like the look of that, but not really into the look of the factory panel here
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=103_204&products_id=22439

I,m thinking about new case for watercooling setup, & I really like yours.

[mrmaigo]

Mjhieu, why not just change the fittings?
Great looking pump top

[keepaf1]

Finally finished my custom rig which i am in the process of changing yet again - lol
i have since sold my 500w waterchiller and am waiting for my new custom built SS phasechange unit to arrive.the new cards that i will be getting will be watercooled.

[BigJoe]

@keepaf1
More pic pleasw :wave:

[keepaf1]

this is a link to my worklog if anyone is interested

http://forums.overclockers.co.nz/showthread.php?t=27295

here is a pic of the case - she is a big sucker - lol

[Janno]

it looks like a mini-fridge :o
awesome rig!

[Astratuner]

i'll take one beer please :D

nice build mate!

[MomijiTMO]

lol the case is huge. HUGE!!!

Nice build :up:

[BigJoe]

this is a link to my worklog if anyone is interested

http://forums.overclockers.co.nz/showthread.php?t=27295

here is a pic of the case - she is a big sucker - lol

Thx for link man :wave:

[Mjhieu]

No, My friend's just take off the lid and change another new lid. Yeah the flowrate increase from 500 to 820l/hour. Of course it's more powerful than the old one from thermaltake. :D

http://i184.photobucket.com/albums/x201/nhenhophach/P1000281.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000282.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000283.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000292.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000300.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000305.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000311.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000327.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000343.jpg

http://i184.photobucket.com/albums/x201/nhenhophach/P1000359.jpg

Let me show you how it works.

Before mod!
http://i184.photobucket.com/albums/x201/nhenhophach/DSC03244-1.jpg

After Mod!
http://i184.photobucket.com/albums/x201/nhenhophach/P1000376.jpg
http://i184.photobucket.com/albums/x201/nhenhophach/P1000378.jpg

Oh ok, so you just remove their pump and replace it with a better one. Thanks for the info. :)

[mrmaigo]

Is that all it takes to make the P500 work? I need one, I need one now

[GbrilliantQ]

http://img176.imageshack.us/img176/6782/dsci0301ev5.jpg
http://img167.imageshack.us/img167/5574/dsci0312dx6.jpg
http://img409.imageshack.us/img409/7043/dsci0315bg1.jpg
http://img255.imageshack.us/img255/8365/dsci0318vh6.jpg

QX9650 @ 4.42ghz
Asus Rampage Formula
LG GGW-H20L Blu-ray Burner/HD-DVD drive
4gb Crucial Ballistix Tracer PC2-8500
2x WD Raptor X's in raid0
1 TB Seagate Barracuda 7200.11
eVGA 8800GT (until 4870x2's arrive)
X-Fi Platinum Fatal1ty Champion Series
CM Stacker 830 Evo2
Realpower pro 1000w psu
Hanns-G 28" 1080p-1920x1200 LCD
MS Vista Ultimate 64

Dtek fuzion (lapped, bowed with quad nozzle)
EK 250mm rev2 res
Thermochill PA120.3 (two shrouds push-pull)
Swiftech MCP655
6 Panaflo 120mm Ultra 115CFM fans
Masterkleer Tubing 7/16"

MX-2 all around.

I'm getting around to taking some better pictures, with my new cannon... I'm kinda lazy now that I got this going.

[CedricFP]

Wow the double sided fans on that TC look heavy duty.

[ls206]

Before mod!
http://i184.photobucket.com/albums/x201/nhenhophach/DSC03244-1.jpg

After Mod!
http://i184.photobucket.com/albums/x201/nhenhophach/P1000376.jpg

Wow, what an improvement! It don't look half bad either.

[MomijiTMO]

Wow the double sided fans on that TC look heavy duty.

I think the rad + fans would make a good weapon for bludgeoning someone to death with. :D

[benniebeeker]

Wow, what an improvement! It don't look half bad either.

lol thats a strange pissing contest....

[Der_KHAN]

MX-2 all around.

I'm getting around to taking some better pictures, with my new cannon... I'm kinda lazy now that I got this going.wow... just wow :eek:

[Mjhieu]

Oh you made me happy man :D

Is that all it takes to make the P500 work? I need one, I need one now

[Mjhieu]

:D yeah that's a extremely pissing contest of pump :rofl:
lol thats a strange pissing contest....

[ShArKo]

Just a new photos...........enjoy


http://img515.imageshack.us/img515/742/dsc00118qs6.jpg (http://imageshack.us)

http://img186.imageshack.us/img186/6282/dsc00126ys6.jpg (http://imageshack.us)

http://img207.imageshack.us/img207/3438/dsc00129js0.jpg (http://imageshack.us)

http://img210.imageshack.us/img210/2212/dsc00140dc0.jpg (http://imageshack.us)

http://img293.imageshack.us/img293/7043/dsc00134uh6.jpg (http://imageshack.us)

[Th3MadScientist]

Little bit of a sneak peak, excuse the dust and the so-so shot using my g/f camera for now, don't want to whip out the D40x.

http://i98.photobucket.com/albums/l244/DaNiceOne87/Mirror.jpg

[mrmaigo]

Oh you made me happy man :D

Does that mean I'm getting one? :bounce::bounce::bounce:

[disruptfam]

looking good :)

[PaRn ssR]

@ShArKo

Raptor X awesome setup , stand it :up:

[adidassler]

nice builds!

[ShArKo]

@ShArKo

Raptor X awesome setup , stand it :up:

thanks men :up::up:

[imapwnu]

no more water cooling for me, idk if you remember me but i am the guy with the crazy single loop, back to air cooling with 3 way sli, looking to possibly go phase later

[amd_hardcore]

my old setup...

sorry lil bit messy... now on air cooling..

http://i219.photobucket.com/albums/cc56/urahara-senpai/wc.jpg

[bundymania]

Tatatataaaa.....here comes the big black one :D ;)

http://www.abload.de/img/img_2549mtk.jpg

[disruptfam]

feser quad

cost the earth?

[bundymania]

soon available for 129 Euro - dunno in dollars yet :)

http://www.abload.de/img/img_2536klt.jpg

http://www.abload.de/img/img_25415qq.jpg

[disruptfam]

so about $200usd and $212aud $212 isn't too bad for a quad rad in AUS seeing how a 120.3 goes for $195 but in u.s thats another story

HW Labs Black Ice GT Xtreme 480 @ $150usd

[Mankz_91]

Thats a very nice rad indeed!

[dubtown]

will it fit in the bottom of a tj-07?

[adidassler]

drooooooooool!

[Hijack]

will it fit in the bottom of a tj-07?

Dimensions are 523 x 120.6 x 60.2 It will fit, but with only fans on one side, else it will conflict with your PSU.

[evil-98]

that looks nice :up: wouldnt mind a few of those

[Garrett]

Hmmm 129 euro isn't too expensive imho... can you say the ultimate rad? :D
Just wondering how it performs compared to the triple version, its smaller "brother"... ;)

[bundymania]

i will test the tfc quad against the Watercool Mora soon - with 5 and 9 YL fans (5, 7 and 12V)

here is my rad review, it´s in german, but you can check the lekker results ;)

http://www.forumdeluxx.de/forum/showthread.php?t=496285

[lyl]

heres a few of my almost finished Lian Li V1000 (theres at least 2 or 3 things in each pic i plan on changing! :P)

worklog here: http://www.xtremesystems.org/forums/showthread.php?t=189797

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0223.jpg
http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0230.jpg
http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/IMG_0375.jpg
http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/rheobus/DSC_0237.jpg

[Th3MadScientist]

individually sleeving that 24pin ATX connector must of been a PITA.

[Mankz_91]

MY everyday school / work PC.

http://i49.photobucket.com/albums/f266/Mankz_91/DSCF2898.jpg

http://i49.photobucket.com/albums/f266/Mankz_91/DSCF2912.jpg

http://i49.photobucket.com/albums/f266/Mankz_91/DSCF2924.jpg

Now with 4Gb o' RAM and 1.6Tb of space. I really do abuse this thing.

[lyl]

individually sleeving that 24pin ATX connector must of been a PITA.

to be honest, i thought it was going to be a lot more of a pain that it really was.

takes a little determination and confidence!

also, i didnt actually sleeve my PSU. I sleeved an ATX extender for multiple reasons
1)didnt have to sleeve a future psu
2)no chance of messing up PSU
3)A LOT easier to know where the pins go back in! (able to use a multimeter)
PM for details :)

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/IMG_0251.jpg
http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0178.jpg

[Unrealer]

to be honest, i thought it was going to be a lot more of a pain that it really was.



Did u paint the ATX molex? :up:

[lyl]

no, just got a black one.

[Th3MadScientist]

oh smart man, way to think outside of the box. :toast:

[bundymania]

Lights off, Spot on :D

http://www.abload.de/img/img_26272ry.jpg

http://www.abload.de/img/img_2631rc0.jpg

http://www.abload.de/img/img_26341m3.jpg

http://www.abload.de/img/img_2642u7d.jpg

http://www.abload.de/img/img_264719t.jpg

http://www.abload.de/img/img_26565ho.jpg

[Malik]

Nice pics Bundymania :)

[disruptfam]

@ lyl sleeve the cpu connector and your sweet

[jay_lee300]

My system as it stand white coolermaster stacker dual loop custom sprayed fans and radiator fully sleeved :-)

[contractk]

jay lee I'm speechless

[BlueAqua]

Incoming Teaser.

http://img.photobucket.com/albums/v297/BlueAqua/IMG_0510.jpg

[xTKxhom3r]

wow you guys have some really really nice cases!

[manyga]

nice bro!

very, very nice!!

Regards!

[skinnee]

Incoming Teaser.


Nice...thats a minnesota build for ya! :up:

[adidassler]

@blue aqua

what gx2 block is that? and how did you fit it? that looks nice!

[disruptfam]

ek block in the original gx2 casing

[Mjhieu]

Oh If you pay me, I will give you one :D

Does that mean I'm getting one? :bounce::bounce::bounce:

[pvtdonuts]

http://i104.photobucket.com/albums/m193/rocerocket505/IMG_1020.jpg
http://i104.photobucket.com/albums/m193/rocerocket505/IMG_1018.jpg

[mrmaigo]

Oh If you pay me, I will give you one :D

I suppose that'd be cheaper than flying out there and supplying sex :rolleyes:

[lichyetan]

Change my Good Old Stacker STC-01 into inverted ATX setup
http://i228.photobucket.com/albums/ee288/lichyetan/DSC01719.jpg
http://i228.photobucket.com/albums/ee288/lichyetan/DSC01721.jpg
http://i228.photobucket.com/albums/ee288/lichyetan/DSC01720.jpg
The setup consists of dual mcr-220QP connect in paralell using y-fittings, D4 pump,D-Tek Fuzion CPU Block with Dual Core Nozzle, Aqua Xtreme MP-01 VGA Block

[emoners]

that look so SWEET pvtdonuts! :up:

[google]

http://i304.photobucket.com/albums/nn161/johann419/DSC_0259.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0260.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0261.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0262.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0264.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0265.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0267.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0269.jpg

without words...

[goramus]

BlueAqua that gx2 mod looks fantastic! cant wait to see your build log! :up:

[DarthBeavis]

http://i304.photobucket.com/albums/nn161/johann419/DSC_0259.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0260.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0261.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0262.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0264.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0265.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0267.jpg


http://i304.photobucket.com/albums/nn161/johann419/DSC_0269.jpg

without words...


Sorry to say but wow . . . .what a mess! Uber low-end components, unsleeved wiring. . . unorganized. . . inefficient water-cooling . . .on the bright side . . . .you have alot of opportunity to improve ;)

[emoners]

ek block in the original gx2 casing

thanks! :) i knew i've seen his worklog before but can't seem to find it anymore :shrug:

[emoners]

Sorry to say but wow . . . .what a mess! Uber low-end components, unsleeved wiring. . . unorganized. . . inefficient water-cooling . . .on the bright side . . . .you have alot of opportunity to improve ;)

well i like his table (what wood is that?) & the view out his window :D

[InsaneOne]

I change my watercooling system in the computer 2. Heres pictures from that.

http://jannheik.daug.net/kuvat/surffikone_18_6_2008/kokonaisuus.jpg
http://jannheik.daug.net/kuvat/surffikone_18_6_2008/kokonaisuus2.jpg
http://jannheik.daug.net/kuvat/surffikone_18_6_2008/kokonaisuus3.jpg
http://jannheik.daug.net/kuvat/surffikone_18_6_2008/nayttis.jpg
http://jannheik.daug.net/kuvat/surffikone_18_6_2008/suunnittelua.jpg

[Fragger]

BlueAqua - Cant wait to see it finished, very very nice.

[b_waggs83]

Alright here it is....I hope all enjoy. Some of the parts are Feser 240 Rad, XSPC Res Top on Laing 3.2 pump, D-TeK Fuzion V2, Tygon 3/8 tubing on 1/2 bitspower fittings.

http://img182.imageshack.us/img182/9287/dsc0100in6.jpg

http://img182.imageshack.us/img182/4232/dsc0098py6.jpg

http://img385.imageshack.us/img385/8061/dsc0102yh5.jpg

http://img180.imageshack.us/img180/4906/dsc0006acr8.jpg

http://img296.imageshack.us/img296/3020/kaitrynandcomputer144oc8.jpg

http://img296.imageshack.us/img296/3020/kaitrynandcomputer144oc8.jpg

http://img296.imageshack.us/img296/7184/kaitrynandcomputer145yz7.jpg

http://img152.imageshack.us/img152/3632/kaitrynandcomputer150wa6.jpg

http://img296.imageshack.us/img296/9751/kaitrynandcomputer151ds0.jpg

[Tile]

I like it - clean, simple and elegant.

[Th3MadScientist]

Using Flash
http://i98.photobucket.com/albums/l244/DaNiceOne87/Nightmare3.jpg

Ambient Light
http://i98.photobucket.com/albums/l244/DaNiceOne87/Nightmare1.jpg

Dark with ISO 100
http://i98.photobucket.com/albums/l244/DaNiceOne87/Nightmare2.jpg

[disruptfam]

what raD?

[Th3MadScientist]

what raD?

M92 GTX Xtreme between CPU and the GPU's and a modded Reserator XT with 2 GT Stealth 240 X-Flows. Not the greatest but it works.

[b_waggs83]

I like it - clean, simple and elegant.

thank you! It's been a little work, next is the NB, SB cooling then i'll work on the video cards.

[xTKxhom3r]

Using Flash
http://i98.photobucket.com/albums/l244/DaNiceOne87/Nightmare3.jpg

Ambient Light
http://i98.photobucket.com/albums/l244/DaNiceOne87/Nightmare1.jpg

Dark with ISO 100
http://i98.photobucket.com/albums/l244/DaNiceOne87/Nightmare2.jpg

its a little to red but i like it nice job bro

[Th3MadScientist]

It not that red in person, the shutter stayed open for so long that it caught all the red light.

[SimpleTECH]

Woot.. finally got myself registered. Took almost a month to get everything sorted out. :embarrassed:

Anyways, thought I'd use my first post to show off my Rocketfish chassis. I have a worklog thread here (http://www.hardforum.com/showthread.php?t=1310060).

I just ordered some more [better] memory from Newegg. I'm just tired of these high voltage Patriot sticks. :/

Hope you guys enjoy it. :)

http://img175.imageshack.us/img175/707/p1010407jz7.jpg
http://img294.imageshack.us/img294/8981/p1010415rw9.jpg http://img294.imageshack.us/img294/9620/p1010417ub6.jpg

http://img294.imageshack.us/img294/1614/p1010425ha7.jpg

http://img514.imageshack.us/img514/5462/p1010445qi7.jpg

[moogle]

Two more snappies

http://img372.imageshack.us/img372/3225/wooo091ls1.jpg (http://img170.imageshack.us/img170/5681/wooo091yc6.jpg)

http://img397.imageshack.us/img397/4123/wooo092xn6.jpg (http://img397.imageshack.us/img397/4461/wooo092dv3.jpg)


Seems like we all like the OCZ XTC :D

[disruptfam]

simpletech thats nice what case?

[MINIz guy]

That's a Bestbuy Rocketfish that he custom painted. He has a few worklogs of it's progress and it's sick!

[xTKxhom3r]

dang that rocket fish is real nice!

[antho]

Hi Guys,

Here is my 343b

http://img112.imageshack.us/img112/8298/controleurpompelc3.jpg


http://img99.imageshack.us/img99/5540/p1000121dn2.jpg



http://img112.imageshack.us/img112/3789/34arcopyyd4.jpg




Antho

[Sagart]

Beautiful antho! :D Both pictures and your rig. ;)

[mrmaigo]

antho: So clean! So black! I so need a towel!

[xTKxhom3r]

hey antho what are those things in your first pic?

[ut2k4_eVer]

http://img365.imageshack.us/img365/5776/pcnuitrn2.jpg (http://imageshack.us)

more photos here :
http://tun-pc.clubdiscussion.net/galerie-pc-f1/xaser-5-wc-t169.htm
;)

[antho]

Thx guys,

In the first pic it's the "heart" of the system, in the left it's an automatic rheobus, the mcubed t balancer big ng, at the right the device is call sensor hub, it's allows the connection of two flow meter, some temps sensor and is able to shutdown the system in case of failure. And the two things mounted vertically are called fan amp and control the pump speed.

This is the link to the manufacturer ;)

http://www.t-balancer.com/english/index.htm

[xTKxhom3r]

wow thats pretty cool thats the frist time i see anything like that keep up the good work! btw i love the led's on your case how much did those 500 led's run you?

[HaCKs]

Woot.. finally got myself registered. Took almost a month to get everything sorted out. :embarrassed:

Anyways, thought I'd use my first post to show off my Rocketfish chassis. I have a worklog thread here (http://www.hardforum.com/showthread.php?t=1310060).

I just ordered some more [better] memory from Newegg. I'm just tired of these high voltage Patriot sticks. :/

Hope you guys enjoy it. :)



why the shoe??

[MINIz guy]

To show off that's he's a size 18 shoe, and how big (or small) that case is.

[Anemic]

Hi Guys,

Here is my 343b

Antho

That is one impressive looking computer...Love it!

[MomijiTMO]

Well the case is HUGE so I guess his feet are HUGE too? lol. Size comparison?

Oh and heaps of people have the T-Balancer. It's a great product if you keep on forgetting to crank the fans when playing games/benching. :)

[HaCKs]

To show off that's he's a size 18 shoe, and how big (or small) that case is.

You know what they say about big feet.....

[N3it1]

You know what they say about big feet.....

That they got big feet?:rofl:

[xTKxhom3r]

That they got big feet?:rofl:

no! that they need big socks!!

[ownage]

You know what they say about big feet.....

That they have beautiful long and strong...........graphics cards?

[xTKxhom3r]

That they have beautiful long and strong...........graphics cards?

uhhh no....

[Pudi]

Haha :rofl: I love you guys :ROTF:

[dubtown]

Haha :rofl: I love you guys :ROTF:

:hm:

you love guys?













http://guigo666.free.fr/comic/conneries/you%27re%20a%20homo.jpg

[twwen2]

Haha :rofl::ROTF: Great pic. Nice builds too guys, keep up the good work everyone:cool:

[emoners]

nice setup antho! :up:

[SimpleTECH]

That's a Bestbuy Rocketfish that he custom painted. He has a few worklogs of it's progress and it's sick!
Thanks. Took quite a while to modify everything but luckily everything turned out alright. :)
dang that rocket fish is real nice!
Only if it comes in black. J/K.
why the shoe??

To show off that's he's a size 18 shoe, and how big (or small) that case is.
Exactly. I also had a few members on another forum request me to compare my case to my gigantic feet. As you can see.. well.. err.. I'm abnormal. :rofl:
You know what they say about big feet.....

That they got big feet?:rofl:

That they have beautiful long and strong...........graphics cards?

no! that they need big socks!!
But it takes quite a man to fill those socks. :ROTF:

Anyways. Thanks for the small support.

I just added my new Mushkin sticks and boy I'm loving them! 1.8V and I still get to keep my overclock. :up:

[antho]

To xTKxhom3r , in fact the led's don't cost me that much around 80 $, me girlfriend bring them back directly to the Chinese manufacturer ;)

[imapwnu]

to be honest, i thought it was going to be a lot more of a pain that it really was.

takes a little determination and confidence!

also, i didnt actually sleeve my PSU. I sleeved an ATX extender for multiple reasons
1)didnt have to sleeve a future psu
2)no chance of messing up PSU
3)A LOT easier to know where the pins go back in! (able to use a multimeter)
PM for details :)

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/IMG_0251.jpg
http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0178.jpg

I've always wondered how this was done, i really like that style of wire sleeving nice man!

[emoners]

@antho: where'd you get the T-balancer?

@lyl: just occurred to me...do you also put heatshrinks on the other end of the 1/8" sleeves (the ones closest to the bigger sleeve)?

[antho]

To emoners http://www.aquatuning.de/ ;)

[benniebeeker]

To emoners http://www.aquatuning.de/ ;)

god that stuff's expensive!!!

[emoners]

antho thanks...found out that it's also available at Performance-PC

[generics_user]

god that stuff's expensive!!!

actually they're cheaper than the EK store, however parts from the US (well most of them) are very expensive (shipping?!)

[lyl]

@lyl: just occurred to me...do you also put heatshrinks on the other end of the 1/8" sleeves (the ones closest to the bigger sleeve)?

Well, I dont individually shrink all 24 on both sides. I just used 1" shrink over the whole thing. Shrink is tight enough, im not worried about it unraveling.

The first picture of course was incomplete (didnt have a black connector), but you can see the 1" shrink in the 2nd picture

[xTKxhom3r]

that type of sleeving reminds me of the sentinels in the matrix haha and i think you would have to put tie straps to keep them all together wouldnt you?

[BlackHouse]

http://images.imagup.com/03/1213996369_1.JPG (http://www.imagup.com/imgs/1213996369.html)

http://images.imagup.com/03/1213996415_1 (1).JPG (http://www.imagup.com/imgs/1213996415.html)

http://images.imagup.com/03/1213996476_1 (2).JPG (http://www.imagup.com/imgs/1213996476.html)

http://images.imagup.com/03/1213996511_1 (3).JPG (http://www.imagup.com/imgs/1213996511.html)

http://images.imagup.com/03/1213996532_1 (4).JPG (http://www.imagup.com/imgs/1213996532.html)

http://images.imagup.com/03/1213996555_1 (5).JPG (http://www.imagup.com/imgs/1213996555.html)


http://images.imagup.com/03/1213996580_1 (6).JPG (http://www.imagup.com/imgs/1213996580.html)

http://images.imagup.com/03/1213996600_1 (7).JPG (http://www.imagup.com/imgs/1213996600.html)

http://images.imagup.com/03/1213996616_1 (8).jpg (http://www.imagup.com/imgs/1213996616.html)

http://images.imagup.com/03/1213996631_1 (9).JPG (http://www.imagup.com/imgs/1213996631.html)

http://images.imagup.com/03/1213996649_zr (1).JPG (http://www.imagup.com/imgs/1213996649.html)

[xTKxhom3r]

wow awesome build bro damn i love that case so much! how can you drop 300 for a case!!! i envy your deep pockets lol

[Boogerlad]

Nice system!

[HaCKs]

You're water cooling an empty socket! Creative.

http://images.imagup.com/03/1213996616_1%20(8).jpg

[Arni]

You're water cooling an empty socket! Creative.

http://images.imagup.com/03/1213996616_1%20(8).jpg

that is mobo cooling ;)
sweet pics

[Metric]

Changed out the barbs for some of the Koolance compression ones and added in some San Aces. A few pictures...

http://dl.getdropbox.com/u/2028/Xtreme%20Systems/_MG_3203.jpg
http://dl.getdropbox.com/u/2028/Xtreme%20Systems/_MG_3282.jpg
http://dl.getdropbox.com/u/2028/Xtreme%20Systems/_MG_3226.jpg
http://dl.getdropbox.com/u/2028/Xtreme%20Systems/_MG_3283.jpg

[MomijiTMO]

Lol I can't see the cpu so it's probably empty. Nice pics and thanks for sharing.

[philbrown23]

it's probably a pic while he's leaktesting, especially as there are no l;ight lit up on the mobo at all ;)

[ownage]

Antec P180!

http://img.techpowerup.org/080620/case.jpg

http://img.techpowerup.org/080620/hddbay.jpg

Custom button to turn off CCFL.
http://img.techpowerup.org/080620/ccfl.jpg

http://img.techpowerup.org/080620/case2.jpg

Only thing left to do is better cable management.
Most people say the P180 isn't an easy case for watercooling, but this case is easy to casemod and to make it ready for watercooling. You just need to be a little creative.

[WarFront2142]

http://img242.imageshack.us/img242/7052/18062008013io8.jpg

[DarthBeavis]

http://img242.imageshack.us/img242/7052/18062008013io8.jpg

WTF is that green thing? I donut knowz but I likes it plenty . . .

[MomijiTMO]

Acrylic :). It certainly makes the back of the card more interesting.

[matt100]

Antec P180!
Only thing left to do is better cable management.
Most people say the P180 isn't an easy case for watercooling, but this case is easy to casemod and to make it ready for watercooling. You just need to be a little creative.

would I be right in thinking you can't get the side panel back on?

[ownage]

would I be right in thinking you can't get the side panel back on?

Yes, but then i would have to make an extra hole in the case. I won't use the side panel, so this way was good enough for me.

I have a petter picture. Daylight and pc turned off.
The water is blue because i used Antifreeze.

http://img.techpowerup.org/080621/case3.jpg

[WarFront2142]

WTF is that green thing? I donut knowz but I likes it plenty . . .

LOL:ROTF:
It is AcrylPanel 5mm - 480x480mm UVGreen :up:

http://www.it-service.be/webshop/product_info.php?cPath=29_32&products_id=97

[DarthBeavis]

LOL:ROTF:
It is AcrylPanel 5mm - 480x480mm UVGreen :up:

http://www.it-service.be/webshop/product_info.php?cPath=29_32&products_id=97

I meant what is its purpose . . . I could tell it was UV green acrylic sheet . . .but what is it doing there. It looks kinda neat. Is it used as a backing plate for something or a divider wall or a mounting or what?

[Gir92]

I'd say it looks like it's there for more of a "bling" effect, not so much as a real purpose.

[RealRedRaider]

Don't care for green myself. Now if it was RED........

[DarthBeavis]

Don't care for green myself. Now if it was RED........

which would look pink . . .
which makes me think of . . .
http://www.youtube.com/watch?v=fbh9UTOKfB0

[Astratuner]

Hey guys can i ask you a favor :D

I've lost my favourites and there was a site with the most beautiful watercooling made.

the tj07 murderbox and a blue cosmos s case where also on that site.


Can anyone tell me what the url is?


tks

[mrmaigo]

I'd say it looks like it's there for more of a "bling" effect, not so much as a real purpose.

Keeps dust off

[b@llz0r]

Hey guys can i ask you a favor :D

I've lost my favourites and there was a site with the most beautiful watercooling made.

the tj07 murderbox and a blue cosmos s case where also on that site.


Can anyone tell me what the url is?


tks

http://www.million-dollar-pc.com

[Mankz_91]

I found some photos of my first WC'd PC, about 2 years ago or so now:

http://i86.photobucket.com/albums/k115/alexmanktelow/P1080074.jpg

[Astratuner]

http://www.million-dollar-pc.com


tks mate

[Sleepyzone]

http://i303.photobucket.com/albums/nn159/sleepyzone/DSCF0109.jpg
http://i303.photobucket.com/albums/nn159/sleepyzone/DSCF0118.jpg
http://www.newegg.com/Product/ShowImage.aspx?Image=11-163-093-13.jpg%2c11-163-093-18.jpg%2c11-163-093-03.jpg%2c11-163-093-09.jpg%2c11-163-093-04.jpg%2c11-163-093-05.jpg%2c11-163-093-10.jpg%2c11-163-093-11.jpg%2c11-163-093-14.jpg%2c11-163-093-06.jpg%2c11-163-093-15.jpg%2c11-163-093-07.jpg%2c11-163-093-08.jpg%2c11-163-093-17.jpg%2c11-163-093-16.jpg%2c11-163-093-12.jpg&S7ImageFlag=0&WaterMark=1&Item=N82E16811163093&Depa=1&Description=SILVERSTONE+Kublai+Series+KL02B+Black+ Computer+Case My back up computer.

[b@llz0r]

tks mate
bitteschön

[rider_2hip]

black or red

http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1490.jpg

http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1525.jpg

color combo
http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1511.jpg

in full red
http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1523.jpg

Fesser Black and Caterpillar ELC(red coolant)


RIG-under construction-

[malkiewicz]

Both..

[Raxxath]

Ermmm... Raxxath... Where are the wires?!?


Great work. :)

Do you actually have the wires plugged? If yes, great work

Yes, that's fully wired. I put a lot of effort into cable management.

As promised, here are some more pictures. (I think my camera's lens is a little dirty).

http://i38.photobucket.com/albums/e119/LordBrona/ee46a6df.jpg

http://i38.photobucket.com/albums/e119/LordBrona/d5cca4c5.jpg

http://i38.photobucket.com/albums/e119/LordBrona/2ae861e1.jpg

http://i38.photobucket.com/albums/e119/LordBrona/071cfb60.jpg

http://i38.photobucket.com/albums/e119/LordBrona/d6bff2ea.jpg

http://i38.photobucket.com/albums/e119/LordBrona/07e0a94e.jpg

http://i38.photobucket.com/albums/e119/LordBrona/05b5c35c.jpg

[skinnee]

Ok seriously...where are all the wires?

I see the ends, but there has to be a mess behind the mobo tray...like kids cleaning their room and shoving everything in the closet or under the bed. :rofl:

[Vatos_locos]

Raxxath i'am speechless those f@cking wires are really a P.I.T.A

[tbone8ty]

niiice what case is that?

[taylormsj]

I think that is MDPC worthy !

[Marco André]

niiice what case is that?

Looks like a Lian Li PC-A70 :cool:
EXTREME CLEAN. I LOVE IT! Congrats! How many time you spent on it?

[Intern]

Just a little teaser. Far from done yet :)

http://tilmpw.bay.livefilestore.com/y1pykFLCUgVBQMp-bIEqTsRq5XAFG-_YUXJ27g7XUTK0ZrjXhT_d39CZqna7M9czN1-Ba8oQ4RmSaIoIgbw4eBBZQ/Bilde%20296.jpg

BTW: Nice rig, Raxxath!

[Sagart]

Looks gorgeous, Intern. :) Looking forward to see the end result. ;)

[RealRedRaider]

@Raxxath...

That's one SICK build.....

[Raxxath]

Thank you everyone :). Being recognized for lots of hard work feels good!

It took quite a few months, due to lots of problems, but its great to have it finally finished. I'm still not sure if I should get a waterblock for the GX2, step-up to a GTX 280, or something else. I have all the parts for a second loop though, so maybe it will look even better in the future.

I think that is MDPC worthy !

I would be honored to have my rig among those :eek:. The slightly-ghetto side panel needs to be replaced, though. I'm going to have another cut by a laser, so I won't need any channel molding.

[RealRedRaider]

black or red

http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1490.jpg

http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1525.jpg

color combo
http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1511.jpg

in full red
http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1523.jpg

Fesser Black and Caterpillar ELC(red coolant)


RIG-under construction-


I like both...

My upcoming build will feature the following:

Tygon B-44-4X (1/2" x 3/4") - Red Feser One
Tygon R3400 (1/2" x 3/4") - Red Feser One (for visuals in the res's)

1/2" x 3/4" Bitspower Compression Fittings
1/2" Bitspower "FatBoy" Fittings

[Shocker003]

Raxxath, Clean setup. I would have asked if you took those pics after getting rid of most cables and wires:up:

[whatever]

rider_2hip, put a picture of the whole motherboard, then i`ll tell you what color :D

[lyl]

in full red
http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1523.jpg

Careful running your video card without being secured down... that stress from freestanding is not good for the the mobo/card.

[N3it1]

insane rig @ Raxxath : Just tell me your whereabouts and ill snatch that rig to better safe!

[rider_2hip]

Careful running your video card without being secured down... that stress from freestanding is not good for the the mobo/card.

Thanks for the advice but I moved it already to his new home,,, I got lian li rocket fish,



I also decided to use red coolant for my asus striker formula set up.

and Fesser Black for my DFI LP DK 790fx set up.

thanks to all

expect some picture after completion :shocked:

[junkun13]

http://i88.photobucket.com/albums/k174/junkun13/PC/fr3.jpg

[kinghong1970]

damn Bugkalot! dont tease us...post more pics!

loots mighty fine so far...

[twwen2]

damn Bugkalot! dont tease us...post more pics!

loots mighty fine so far...

+1 More pics needed. Looks great!

[metachronos]

I gotta stop looking at this thread or I'll die of pure envy :D

[biftek.]

Hey Raxxath, mind posting some pics of the A05 internals? :)

[The[R]eaper]

Hey, Bugkalot, what tubing is that?

Looks great +1 to more pics.

[rafwlkp]

bugkalot Malik style ^^
Show more pics mate :D


EDIT:
eaper;3086730']Hey, Bugkalot, what tubing is that?

Looks great +1 to more pics.
This is Feser One blue tube (http://www.feser-one.com/site/product_info.php?cPath=74&products_id=278)

[The[R]eaper]

^^ thanks looks great

[Sugar4o]

http://i88.photobucket.com/albums/k174/junkun13/PC/fr3.jpg
Awesome tubing!!!
Can I make one suggestion. I’m not sure if it is possible but I would swap the 2 tubes on the north bridge to avoid the knee between the processor outlet and chipset inlet.
The other option is to rotate the chipset block.

[xTKxhom3r]

Awesome tubing!!!
Can I make one suggestion. I’m not sure if it is possible but I would swap the 2 tubes on the north bridge to avoid the knee between the processor outlet and chipset inlet.
The other option is to rotate the chipset block.

yup thats a very good suggestion and the tubing is real nice...

[atlxkevinx]

Wow!!! So many very clean builds! I wish I can mod like some of you guys, very jealous. I have a few questions.

1. Right now I have my pump > cpu > radiator > reservoir and I see most people run from pump > cpu first. Is that going to be a big difference in temp?
2. And also, I am using a D-tek cpu block and MCR320 (brass body & tubes) so is it okay just to distilled water + PT Nuke or will I need anti-corrosion protection? What type of mix is the most simple + safe? Distilled water + PT Nuke?
3. What type of tubes do you guys recommend? I am currently using the Masterkleer 7/16" ID.

Here are some pics of my quick build. I am moving out soon so I will rebuild it when I move out and get new tubes.

http://i14.photobucket.com/albums/a336/atlxkevinx/PC/2.jpg

http://i14.photobucket.com/albums/a336/atlxkevinx/PC/1.jpg

Any recommandations or tips to help me improve my system?

[ls206]

Looks good, but what's that strange twist in the tubing, rad -> res O_o

[atlxkevinx]

Haha, yeah.. I like it. The reason I did that was because I did not want the tubes to rest on top of the other tubes, and it looks bad. I wouldn't think performance would be affected by it.

[Aldy402]

looks good, just get some neoprene or something under the pump to reduce vibrations to the drive cage..

[Bubbaxm2]

Few pics of my Thermaltake Armor.
First one is what it used to look like. The rest are current.
http://img166.imageshack.us/img166/9296/oldmediumxj1.th.jpg (http://img166.imageshack.us/my.php?image=oldmediumxj1.jpg)

http://img166.imageshack.us/img166/5568/img0001mediumhg6.th.jpg (http://img166.imageshack.us/my.php?image=img0001mediumhg6.jpg)

http://img166.imageshack.us/img166/1605/img0008mediumtj1.th.jpg (http://img166.imageshack.us/my.php?image=img0008mediumtj1.jpg)

http://img166.imageshack.us/img166/9496/img0006mediumqp5.th.jpg (http://img166.imageshack.us/my.php?image=img0006mediumqp5.jpg)

http://img166.imageshack.us/img166/5953/img0010mediumii2.th.jpg (http://img166.imageshack.us/my.php?image=img0010mediumii2.jpg)

[CyberDruid]

@Raxxath: Superb cable management. That's a very thoughtful build.

[WheelMan]

Just a little teaser. Far from done yet :)

*huge-ish picture*

I like your work ^_^

Keep it up!

[MomijiTMO]

1. Right now I have my pump > cpu > radiator > reservoir and I see most people run from pump > cpu first. Is that going to be a big difference in temp?
2. And also, I am using a D-tek cpu block and MCR320 (brass body & tubes) so is it okay just to distilled water + PT Nuke or will I need anti-corrosion protection? What type of mix is the most simple + safe? Distilled water + PT Nuke?
3. What type of tubes do you guys recommend? I am currently using the Masterkleer 7/16" ID.


For your loop it doesn't matter. People have done that for pressure reasons on a multi block loop that has several large restriction points.
Nothing can corrode in your loop.
That tubing is fine. Most people here use Tygon tubing as it doesn't suffer from the plasticiser leech [well as much as other tubing]. You might find that 1/2" ID might give you a better flow rate and subsequently better temperatures but it is best if you read one of the stickied threads on tubing size and the effect on temperature.

Cheers.

[Kaister]

So I am about this fire this baby up.

My goals were:
Looks good, great sidewindow appeal but not tacky.
All has to be inside, no external rads.
No wire clutter.
Must run cool and especially quiet, yet allowing for a decent overclock.

the only challenge: How to mount a Thermochill RAD 120.3 into the Lian Li armorsuite without drilling to many 120mm holes into the bottom. I wanted the vertical arrangement to allow the air from the front 3 14cm fans to be utilized.
It is a bit tough to get to the drive bays.....I get there from the front of the case.

See for yourself. Sorry for the wires of the GPU....as I said...not quite finished yet.

http://picasaweb.google.com/kaispeth/NewPCProject/photo#5216154498097357186
http://picasaweb.google.com/kaispeth/NewPCProject/photo#5216154362105619186
http://picasaweb.google.com/kaispeth/NewPCProject/photo#5216154436848700002

Lian Li armorsuite, TT 1200W PSU, Asus Striker II Extreme, E8500, 4GB of Patriot Viper, 2 eVGA 8800GTX with DD blocks, D-tek Fusion, Aquastream XT Ultra, 2 Raptors @ 150GB each (Raid0), 3 Seagates @1TBea (Raid 5), 3ware PCI-e RAID controller...Thermochill Rad PA 120.3

[bundymania]

http://www.abload.de/img/img_29169un.jpg

http://www.abload.de/img/img_2918bns.jpg

Radiator on Fire ;) :D

[MomijiTMO]

Damn that rad and the shrouds are just awesome.

[RealRedRaider]

@bundymania....

That is PURE SICKNESS........

love the RED

[Burn]

What radiator shrouds are those?

[eXa]

thats the Feser ones.

[Burn]

Can we get them separately? Or do they have to be purchased with the radiator? I would love to get 3 for mine.

[Fr3ak]

You can get them separately in the colors gree, blue and red. :)

Looks really nice, I will post some pics very soon too :)

[Arni]

That looks like truck on gta 3 "she's on fire and she's burning" :D: :D : D :D :D

[bundymania]

...some more disco feeling :)

http://www.abload.de/img/img_293785j.jpg

http://www.abload.de/img/img_2943p9f.jpg

http://www.abload.de/img/img_2950yav.jpg

...and a teaser from my upcoming project

http://www.abload.de/img/img_2781uyf.jpg

http://www.abload.de/img/v1010-5nvy.jpg

[Fr3ak]

The shourds dont just look good, they result in a better airflow => 1-2C better temps :)

Nice pictures! :toast:

[disruptfam]

very slick bundy!

[x0vash0x]

...some more disco feeling :)

http://www.abload.de/img/img_293785j.jpg

http://www.abload.de/img/img_2943p9f.jpg

http://www.abload.de/img/img_2950yav.jpg

...and a teaser from my upcoming project

http://www.abload.de/img/img_2781uyf.jpg

http://www.abload.de/img/v1010-5nvy.jpg

What waterblocks are you using on that X38? MIPS?

[MomijiTMO]

Looks like it.

[Raxxath]

@Raxxath: Superb cable management. That's a very thoughtful build.

Thank you, that means a lot coming from you and your incredibly sexy rigs. I hope to have even a fraction of your modding skills some day.

insane rig @ Raxxath : Just tell me your whereabouts and ill snatch that rig to better safe!

I actually wish I could sell it for as much as I ended up paying for it. All the parts that didn't work out really add up, and being in debt sucks!

Hey Raxxath, mind posting some pics of the A05 internals? :)

The A05 isn't water cooled, so I shouldn't post it here. However, it is somewhat unique in thats its two separate systems in one, separated by that DPDT switch you see on the front. I'll probably post a few pictures in the A05 thread over at [H].

Thanks again for the comments everyone.

[CyberDruid]

http://img204.imageshack.us/img204/8715/cosmolights040mq5.jpg

http://img524.imageshack.us/img524/4788/cosmolights039ln4.jpg

http://img440.imageshack.us/img440/5985/cosmolights037jw1.jpg

http://img524.imageshack.us/img524/4267/cosmolights031gp5.jpg

[HaCKs]

That looks good!!! I love it. Where is the worklog? Do you have brighter pictures?

[CyberDruid]

Thanks

I'll update the log here as soon as I get a chance.

http://img524.imageshack.us/img524/6803/cosmolights053ii4.jpg

http://img95.imageshack.us/img95/7733/cosmolights050me9.jpg

[disruptfam]

<3 it cd!!!

[bluc]

[QUOTE=CyberDruid;3095090]Thanks

I'll update the log here as soon as I get a chance.

fantastic work as always love the tripple reservoir setup :up::up::up:

[MomijiTMO]

It might have taken some time but heck that is one awesome build CD. Glad to see you have returned from your hiatus :up:

[Anemic]

Thanks

I'll update the log here as soon as I get a chance.



AMAZING work :up::shocked::up::clap:

[septim]

CD it definitely looks great...

reminds me of something though...

[rider_2hip]

Thanks

I'll update the log here as soon as I get a chance.


that is another beautiful cosmos in water



my dfi dark 790fx temporarily fitted on bare chasis

http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1548.jpg

http://i192.photobucket.com/albums/z173/rider_2hip/IMG_1546.jpg

[emoners]

CD, i love the way you mounted the Raptor Xs! :up:

[mrmaigo]

CD, i love the way you mounted the Raptor Xs! :up:

Speaking of which, why don't Raptors have multi-color leds and a jumper? :rolleyes:

[RCG_Bex]

Hey guys and gals.

Heres my PC before my GPU blew up in my case (snack crackle pop spark smoke flames!).

The 1 week non stop leak test....
http://img129.imageshack.us/img129/2051/dsc00543ft6.jpg (http://imageshack.us)

How it looked when it was nearly finished...
http://img129.imageshack.us/img129/3123/dsc00557iw1.jpg (http://imageshack.us)

Scores and details of the rig :
- E6750 @ 3.6GHz (W/C with Swiftech Apogee block - 4GHz has been ran but still tweaking)
- 2x 1GB DDR2 1200mhz running at 1:1
- Asus Maximus Forumla SE (W/C)
- 1x Asus 3870X2 (W/C but not OC'd)
- 2x 160GB Seagate Barracudas (RAID O)
- Windows Vista Ultimate (64bit - think I'll go back to 32bit though - been buggy)
- 2x 240mm Swiftech starter kit rads
- Thermaltake Thunderblades reduced to near silence

Temps run around 40c when doing that and 30-32c in Windows with the usual background palava of programs confirmed with Probe II.

Should get some better pictures to be honest :(

Probably going to change case though. There just isn't enough room in there any more and this PC carries alot of painful memories - it was what got me through the roughest of past times.

~Bex

[begrip]

seen other people on the forums that got red tubing/water and that black thingy to do that the tubing not get kinky :S, hmm where is my english can't write anymore :P

[CyberDruid]

Have not seen black coolsleeves...

[Aldy402]

Have not seen black coolsleeves...

koolance makes them
link (http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=59_399_238)

[valdi200]

Hello all :) My first post in this XS

First LC in my PC. Not yet completed

test:
http://images33.fotosik.pl/301/f719a451cbc8caa7.jpg (www.fotosik.pl)

Parts:
MCW30 x2
Apogee GTX
AquagraFX g92
TC PA 120.3
Black Water Advanced 122
Laing DDC 1RT+OCLabs TOP
Tygon R-3606 13/17
DangerDen nk13 and nk14
6x Xthermal BFT PRO LED 120

E8400@we will see :)
DFI DK P35 T2RS
Asus EN8800 GTS 512
4GB Crucial Ballistix
X-Fi Extreme music
Corsair HX 520
2 hard drive seagate in Scytche Quiet Drive
Chieftec BA-01-B-B-B

[CyberDruid]

Thanks

[RealRedRaider]

@CD...

WOW... Those reservoirs are really nice... What an original idea...

[mcoffey]

Hello all :) My first post in this XS

First LC in my PC. Not yet completed

test:
http://images33.fotosik.pl/301/f719a451cbc8caa7.jpg (www.fotosik.pl)

Parts:
MCW30 x2
Apogee GTX
AquagraFX g92
TC PA 120.3
Black Water Advanced 122
Laing DDC 1RT+OCLabs TOP
Tygon R-3606 13/17
DangerDen nk13 and nk14
6x Xthermal BFT PRO LED 120

E8400@we will see :)
DFI DK P35 T2RS
Asus EN8800 GTS 512
4GB Crucial Ballistix
X-Fi Extreme music
Corsair HX 520
2 hard drive seagate in Scytche Quiet Drive
Chieftec BA-01-B-B-B

Welcome to XS....

Looks like you really have a great build started there. can't wait to see it completed.

gl and have a blast,
andyc

[bluc]

Hello all :) My first post in this XS

First LC in my PC. Not yet completed




Parts:
MCW30 x2
Apogee GTX
AquagraFX g92
TC PA 120.3
Black Water Advanced 122
Laing DDC 1RT+OCLabs TOP
Tygon R-3606 13/17
DangerDen nk13 and nk14
6x Xthermal BFT PRO LED 120

E8400@we will see :)
DFI DK P35 T2RS
Asus EN8800 GTS 512
4GB Crucial Ballistix
X-Fi Extreme music
Corsair HX 520
2 hard drive seagate in Scytche Quiet Drive
Chieftec BA-01-B-B-B

:welcome::up:

[RealRedRaider]

Hello all :) My first post in this XS

First LC in my PC. Not yet completed

test:
http://images33.fotosik.pl/301/f719a451cbc8caa7.jpg (www.fotosik.pl)

Parts:
MCW30 x2
Apogee GTX
AquagraFX g92
TC PA 120.3
Black Water Advanced 122
Laing DDC 1RT+OCLabs TOP
Tygon R-3606 13/17
DangerDen nk13 and nk14
6x Xthermal BFT PRO LED 120

E8400@we will see :)
DFI DK P35 T2RS
Asus EN8800 GTS 512
4GB Crucial Ballistix
X-Fi Extreme music
Corsair HX 520
2 hard drive seagate in Scytche Quiet Drive
Chieftec BA-01-B-B-B

:welcome: to XS, home to the Uber Xtreme....

[ANP !!!]

Welcome Valdi200, I guess that's a Chieftec.

[emoners]

welcome to XS valdi200! :welcome:

uhmm do you use your chieftec to iron your clothes?:p:

[leo_bsb]

I had the case powdercoated
http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/P1010051Large.jpg

and made a temporary loop until my XSPC top/res arrives. Should I keep the orange tubing?
http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/P10100661024x768.jpg

[n00b 0f l337]

What can I say, I dig the OJ.

[Plastek]

better pisc:)

http://img185.imageshack.us/img185/9374/dsc00691do9.jpg
http://img146.imageshack.us/img146/9510/dsc00731gk2.jpg
http://img519.imageshack.us/img519/1966/dsc00733zx5.jpg
http://img380.imageshack.us/img380/5435/dsc00740fq4.jpg
http://img380.imageshack.us/img380/1959/dsc00741yj0.jpg
http://img80.imageshack.us/img80/8871/dsc00756ly2.jpg
http://img80.imageshack.us/img80/2856/dsc00765fi2.jpg
http://img257.imageshack.us/img257/4900/dsc00769jm6.jpg
http://img80.imageshack.us/img80/4269/dsc00771wc1.jpg

[eltinio]

That's some nice case and blue liquid Plastek but :shocked: floppy drive?

[MomijiTMO]

Not everyone is using a usb flash drive to flash their bios ;)

[down8]

http://farm4.static.flickr.com/3294/2618773624_d4590227aa.jpg (http://farm4.static.flickr.com/3294/2618773624_d4590227aa_b.jpg) http://farm4.static.flickr.com/3101/2617946353_d13fd7d7b8.jpg (http://farm4.static.flickr.com/3101/2617946353_d13fd7d7b8_b.jpg)
Li'Lfish, DX38BT, Q6700@3.33GHz, 2GB Crucial Ballistix DDR3, WD6400AAKS, HD4850 (needs an S1), Lite-On SATA, HX620
MCR-220+Yate-Loons, MCP-655 @ 1, DD X38, DTek Fuzion V2+Quad, microsres, 7/16" MasterKleer, PrimoChill UV coils

http://farm4.static.flickr.com/3002/2623265524_08d9421a55.jpg (http://farm4.static.flickr.com/3002/2623265524_08d9421a55_b.jpg) http://farm4.static.flickr.com/3227/2617943681_ff3e1e0a75.jpg (http://farm4.static.flickr.com/3227/2617943681_ff3e1e0a75_b.jpg)
PSU is weatherstripped to isolate from the inside (air drawn from outside goes right back out)
Rad is weatherstripped to force the hot air down through vent holes
80-120m adapter on another Yate-Loon forces the intake air towards the rad intake (temporary until I make a better duct)

http://farm4.static.flickr.com/3234/2617949193_122a4aa3c5.jpg (http://farm4.static.flickr.com/3234/2617949193_122a4aa3c5_b.jpg)
Temporary 120mm until I get Kama-bay or Lian-Li bay,
and the older style 80mm Li-Li bay for my HDD(s)

I have a small concern that the res is too low, and I definitely need taller feet/Li-Li replacement wheels to remove some restriction on the rad exhaust. But, so far it's working great. I haven't been able to get it above 56*C (even at 87*F ambient), but I still need a fan controller to lower the noise.

I just figured out where to put this:
http://farm3.static.flickr.com/2279/2620916931_b36c74cbff_o.gif (http://www.directron.com/bgsilverskull.html)
:D BoneTrail FTW!
http://farm4.static.flickr.com/3142/2623262208_ae7ae0c139.jpg (http://farm4.static.flickr.com/3142/2623262208_ae7ae0c139_b.jpg) http://farm4.static.flickr.com/3276/2622438831_1eba0c608a.jpg (http://farm4.static.flickr.com/3276/2622438831_1eba0c608a_b.jpg)

Lastly, I call these shots "Confessions of a Hardware Junkie":
http://farm4.static.flickr.com/3143/2622621582_558f69d333.jpg (http://farm4.static.flickr.com/3143/2622621582_8a677f02f1_o.jpg) http://farm4.static.flickr.com/3267/2621795659_a94a275746.jpg (http://farm4.static.flickr.com/3267/2621795659_12d33f1556_o.jpg)
I'll need to take these again when I clean up the HTPC, and I'll open my laptop & lay out the Axim just to make the family complete. :D
(The SonataIII is actually empty - for a few more days - it's going to be a sound editing machine for my brother-in-law.)

[eXa]

FYI. get the lian li one. The kama bay has terrible... ehm whats the word, fit form... err something. Every case ive tried mine on leaves gaps one both sides of it.

[jois21]

@Plastek: cool!!

[Pedalmonkey]

what tubing is that leo???

[disruptfam]

nice job plastek

[leo_bsb]

what tubing is that leo???

It is a brazilian made called Tanger Flex by Mantac.
http://www.mantac.com.br/produtos.php
Their website is not very informative but it should be the "TRANÇADA SUPER FLEXÍVEL PT150"

[alpha0ne]

It is a brazilian made called Tanger Flex by Mantac.
http://www.mantac.com.br/produtos.php
Their website is not very informative but it should be the "TRANÇADA SUPER FLEXÍVEL PT150"

I like it :up:

[shachar2]

I had the case powdercoated
http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/P1010051Large.jpg

and made a temporary loop until my XSPC top/res arrives. Should I keep the orange tubing?
http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/P10100661024x768.jpg

I liked the orange tubing
I wonder if you can build it with two color tubing: one for cool water the other for warm water. This will help you figure out what goes where right by looking at it

[Alexxx650]

My system
http://keep4u.ru/imgs/s/080630/57/5710e282168a9fe7b0.jpg (http://keep4u.ru/full/080630/5710e282168a9fe7b0/jpg) / http://keep4u.ru/imgs/s/080630/23/23c5e8fb574d6f95ba.jpg (http://keep4u.ru/full/080630/23c5e8fb574d6f95ba/jpg) / http://keep4u.ru/imgs/s/080630/7b/7b316f55ad07f642b9.jpg (http://keep4u.ru/full/080630/7b316f55ad07f642b9/jpg) / http://keep4u.ru/imgs/s/080630/4c/4c37e40b67b6f80087.jpg (http://keep4u.ru/full/080630/4c37e40b67b6f80087/jpg)
http://keep4u.ru/imgs/s/080630/61/615bd1449f7f9ab9de.jpg (http://keep4u.ru/full/080630/615bd1449f7f9ab9de/jpg) / http://keep4u.ru/imgs/s/080630/89/890ab7ef036995d44e.jpg (http://keep4u.ru/full/080630/890ab7ef036995d44e/jpg) / http://keep4u.ru/imgs/s/080630/e4/e4a528d64ba96f8896.jpg (http://keep4u.ru/full/080630/e4a528d64ba96f8896/jpg) / http://keep4u.ru/imgs/s/080630/3f/3f5426f7d96b70b582.jpg (http://keep4u.ru/full/080630/3f5426f7d96b70b582/jpg)
http://keep4u.ru/imgs/s/080630/f0/f018c884ac8a09b496.jpg (http://keep4u.ru/full/080630/f018c884ac8a09b496/jpg):D

[Lagaaja]

I was originally thinking too using blue tubing for cooled water and tubing color eventually turning red just before radiator.

Nah, I said. So right now I'm going for clear tubing, badass car-rad and turning my Sonata II totally black with red lights. I'll post a worklog or something later this week, and I'll finally add my baby to this sweet WC case gallery.

And leo_bsb, that orange tubing looks good for me, alltough you'll have to go orange with the rest of your setup too, because those tubings are quite domating. And change that coloured liquid :confused:

[whatever]

What`s with all those caps? Low Esr type ?

[lyl]

Updated pics of my build! Im just going to say 'still not complete' for now :P

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0285.jpg

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0287.jpg

[disruptfam]

looks great!

chuck a 120 rad in and watercool that 4870 :)

[Arni]

Updated pics of my build! Im just going to say 'still not complete' for now :P

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0285.jpg

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0287.jpg

nice and clean :)

[DarthBeavis]

Updated pics of my build! Im just going to say 'still not complete' for now :P

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0285.jpg

http://i137.photobucket.com/albums/q204/lyl18/WC%20Worklog/DSC_0287.jpg

teach me how to take pics like that!!!!!!

[Plastek]

DarthBeavis where dvd room?

[skinnee]

teach me how to take pics like that!!!!!!

+1, I need some help in the photo taking arena.

[Arni]

teach me how to take pics like that!!!!!!

Buy good camera + tripod ;)

[OC4/3]

This is my first liquid cool computer.Installation and cable management done by bryanyeo87 from lyn.net.Thanks,bro.

Here is some pic:
http://farm4.static.flickr.com/3152/2624565927_531243e6ee_o.jpg
http://farm4.static.flickr.com/3277/2624565905_673fe9735d_o.jpg
http://farm4.static.flickr.com/3012/2625338012_d68667827d_o.jpg

Loop Spec:
Dtek Fuzion V2
Swiftech MCR220
Swiftech Micro Res
Generic 1/2" ID Tube
3xYate Loon Mid Speed(77cfm)
Swiftech Radbox
Nirox P2800

[CyberDruid]

http://img514.imageshack.us/img514/2131/cosmosclosed020qq8.jpg

http://img47.imageshack.us/img47/8256/cosmosclosed023vd8.jpg

http://img70.imageshack.us/img70/7608/cosmosclosed026uc1.jpg

http://img105.imageshack.us/img105/3505/cosmosclosed033by2.jpg

http://img47.imageshack.us/img47/8200/cosmosclosed034fl1.jpg

http://img514.imageshack.us/img514/8435/cosmosclosed035pr1.jpg

http://img78.imageshack.us/img78/2282/cosmosclosed046bt2.jpg

Happy Bunny is Happy.

http://img530.imageshack.us/img530/6164/cosmosclosed055om9.jpg

[Freebo]

Pics of my PC from the Vid on page 369

http://i2.photobucket.com/albums/y32/Freebo/Cases/Koen%20Type%20S/01.jpg

http://i2.photobucket.com/albums/y32/Freebo/Cases/Koen%20Type%20S/02.jpg

http://i2.photobucket.com/albums/y32/Freebo/Cases/Koen%20Type%20S/03.jpg

http://i2.photobucket.com/albums/y32/Freebo/Cases/Koen%20Type%20S/04.jpg

[skinnee]

Nice rig Freebo! :up:

[taylormsj]

This is my first liquid cool computer.Installation and cable management done by bryanyeo87 from lyn.net.Thanks,bro.



Nice pictures, but what cable management :p:

+1 for PC 7 cases :D

[bundymania]

first impressions of my new rig:

http://www.abload.de/img/img_3054def.jpg

http://www.abload.de/img/img_3046626.jpg

http://www.abload.de/img/img_304119v.jpg

http://www.abload.de/img/img_3060zeg.jpg

...stay tuned for more........soon ! :)

[taylormsj]

Holy cow, i guess ill be the first to compliment the tubing and ask, what isit??

[lyl]

yeah, the orange+silver looks good!

[bundymania]

It´s the feser 3/8" tubing - available @frozencpu in the us

[disruptfam]

what fan is that @ the back bundy?

[SimpleTECH]

^^ It looks like an Xigmatek XLF-F1253.

If it is, I am so getting it for my front intake fan. :)

[bundymania]

yeah, right -> its an Xigmatek ! :)

http://www.abload.de/img/img_3092d3u.jpg

...now with some extra Leds :D

[twwen2]

Wow :eek:

I'm liking those tubes!

[silverphoenix]

Wait so it's fesser orange tubing? or is it red but camera makes it look like that? Because I don't think fesser orange tubing exists