Water Cooled Case Gallery

[Fujimitsu]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

The software that comes with it looks pretty sweet, not sure about performance though theres a post about it somewhere.

[stormshadow]

nope not just you, I think you're right! Looks like the pump outlet is straight to the corner outlet of the fuzion, not the inlet...

Just fix the fuzion and you have a nice rig :D

i knew it! :D

but i can't help but wonder...

how are the temps in that configuration? :shrug: :)

[ka lok]

Bugger!! didnt even know that the Block has to be a certain way :eek:. Will Change that tom.

The temps are not too bad (i think), 38c idle and 52c load. My E6600 is overclocked to 3.6ghz needing 1.5125v and havent oced 8800gtx yet.

Cant get it to be stable with orthos yet, but will play crysis with no probs, albeit stuttery at times.

By the way, silly qu ahoy- do i need to turn cpu block upside down or do i need to switch tubes round?

Sorry if im not making much sense, very new to all this.

[stormshadow]

Bugger!! didnt even know that the Block has to be a certain way :eek:. Will Change that tom.

The temps are not too bad (i think), 38c idle and 52c load. My E6600 is overclocked to 3.6ghz needing 1.5125v and havent oced 8800gtx yet.

Cant get it to be stable with orthos yet, but will play crysis with no probs, albeit stuttery at times.

By the way, silly qu ahoy- do i need to turn cpu block upside down or do i need to switch tubes round?

Sorry if im not making much sense, very new to all this.
in this case, the block is mounted fine. Just redo the tubing so that the water goes IN through the center hole and OUT through the corner hole.

[ka lok]

cheers for pointing that guys:up:

by the way, what are the implications of having the tubes the wrong way round? just curious

[stormshadow]

cheers for pointing that guys:up:

by the way, what are the implications of having the tubes the wrong way round? just curious

you tell us :)

doesn't seem like it's a world-ending error. water is still flowing - just not as optimally as it could be.

[Nate P.]

Nice rigs guys.

[ka lok]

will keep you guys updated on if there is any differences in temps after I switch the tubes round.

have to stop typing now coz wife is trying to sleep and apparently I tap keys very loudly! speak to u guys tom!

[AAjax]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

No doubt, looks sweet, but how dose it werk?

[AAjax]

http://www.sharkacomputers.com/aqcoaqmoeh10.html

Never mind, google is my friend

Edit: 7ft max head? Am I figuring this right?

[Nate P.]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?
Looks like a render.. I could be wrong though.:shrug:

[YugenM]

http://www.sharkacomputers.com/aqcoaqmoeh10.html

Never mind, google is my friend

Edit: 7ft max head? Am I figuring this right?

That's a non-XT version.

[AAjax]

That's a non-XT version.

Thx!

[fireice2]

can we get some more pics then please :D

No problem. :D here are some more pics. :D


http://i54.photobucket.com/albums/g116/fireice2/stacker/Watercooledresized.jpg
http://i54.photobucket.com/albums/g116/fireice2/stacker/outside2.jpg
http://i54.photobucket.com/albums/g116/fireice2/stacker/outside3resized.jpg
http://i54.photobucket.com/albums/g116/fireice2/stacker/Closeup.jpg
http://i54.photobucket.com/albums/g116/fireice2/stacker/inaction.jpg

[disruptfam]

looks sik!!!! is that just distilled water no coolant??

Looks nice like that i think i may just use distilled water aswell and let the uv neon's light it up :)

when you upgrade our gfx card take out the fan side bracket thing and wc the gfx card aswell

[peebee]

There are also clear coolants available. Here in germany one of the best, without making the tube looking cloudy. It is called Innovatek Protect.
Available as a concentrate to mix with distilled water, or also ready mixed.



I hope to have my 343b ready soon. :( I need more space for my 2 loops. They won´t fit in my old built :(

http://www.lifepatcher.com/pc/test/sys/testsys1.jpg

[fireice2]

Yup! Pure distilled H20. :D As for the Gfx card, I'm fine cooling it with air. for easy maintenance. hehehe

But i think I'll keep the bottom 2 fans on the side panel to keep cool components .

[ka lok]

you tell us :)

doesn't seem like it's a world-ending error. water is still flowing - just not as optimally as it could be.

Hi Stormshadow, just finished retubing the cpu block and looks like this now

Decided to turn cpu block upside down to keep the tubing running in the same pattern.

Temps have not changed at all, still 38c idle and 52c load but have not let as5 run in yet, so temp might change still.

By the way, i think i was looking at some of your previous rigs for inspiration towards this, had one pic saved on my last HD. Thanx for that :up:

[emoners]

@fireice2: why not use the coolant?

[CyberDruid]

There are also clear coolants available. Here in germany one of the best, without making the tube looking cloudy. It is called Innovatek Protect.
Available as a concentrate to mix with distilled water, or also ready mixed.



I hope to have my 343b ready soon. :( I need more space for my 2 loops. They won´t fit in my old built :(

http://www.lifepatcher.com/pc/test/sys/testsys1.jpg

I can see that :D A veritable tower of power...:eek:

[CyberDruid]

My first water cooling project. :D

From this...
http://i54.photobucket.com/albums/g116/fireice2/stacker/inside1.jpg

To this...
http://i54.photobucket.com/albums/g116/fireice2/stacker/inside3resized.jpg

I see you have a coil to keep your Data cool :p: I like that:cool:

[SparkyJJO]

@fireice2: why not use the coolant?

Lowers thermal conductivity. Pure distilled water for best temps :up:

fireice, that looks sweet!

[disruptfam]

peebee looking good man!! could u post your worklog here @ xs aswell please

[fireice2]

@emoners
I was thinking of adding a Fesser UV Black Dye. :D

But that would be for the next lanparty. hehehe We have monthly lanparties in my place so having a fancy coolant would be nice.

But for daily usage, I still prefer pure H20. :D

@cyber & sparky
Thanks guys! :D


Really have to thank the water-cooling veterans for keeping me away from pre-built kits and also for the ideas on how to setup my loop. :D

I also realized that my two favorite colors are really blue and purple. mwehehehe

[peebee]

peebee looking good man!! could u post your worklog here @ xs aswell please

Maybe, if it goes on with the PC 343b, I can open up a Thread. For the first it will be enough to present the german log as well. Pictures say more tha a hundred words ;) In about two weeks it goes on, so I can make a separate in here. :cool:

[trouble2000]

A quick update:

Before

http://img123.imageshack.us/img123/6608/img3332customcustomfn0.th.jpg (http://img123.imageshack.us/my.php?image=img3332customcustomfn0.jpg)

After

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

One Seagate 160G out, 2 Seagate's single platter in. Ati 2900xt out, 8800 gt in. Changed a rad, changed the fluid, and removed one fan :)

[Vatos_locos]

here is mine :)
the toilet paper is now gone fron ther i placed for leak test :)

http://img152.imageshack.us/img152/3877/hpim1812yi1.th.jpg (http://img152.imageshack.us/my.php?image=hpim1812yi1.jpg) http://img153.imageshack.us/img153/9582/hpim1813jr3.th.jpg (http://img153.imageshack.us/my.php?image=hpim1813jr3.jpg) http://img152.imageshack.us/img152/5332/hpim1814kr7.th.jpg (http://img152.imageshack.us/my.php?image=hpim1814kr7.jpg)
http://img529.imageshack.us/img529/7251/97259279xl7.jpg

[ls206]

A quick update:
One Seagate 160G out, 2 Seagate's single platter in. Ati 2900xt out, 8800 gt in. Changed a rad, changed the fluid, and removed one fan :)

What rads are you using at the front and back?
I've got the same case and wondering if I can fit a 2nd loop in.

[dnb#]

17c?!?!!?!? :S

Is it chilled? cause normally such temps are impossible or am I crazy?
If I'm crazy can you tell me which rad you have then?

[trouble2000]

What rads are you using at the front and back?
I've got the same case and wondering if I can fit a 2nd loop in.

Black Ice GTS/GTS-LITE

http://www.hwlabs.com/gen2/gts/gts120.htm

[deepsilver]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

My lighting is a Canon Speedlite 430EX. :rofl:

I can't test it, because my other watercooling-stuff is not sill here. :(

[Vatos_locos]

17c?!?!!?!? :S

Is it chilled? cause normally such temps are impossible or am I crazy?
If I'm crazy can you tell me which rad you have then?

it's cold wheather here in greece this days :) the ss was taken with the windows open i was ready to run Pi In the Highest clocks i can reache :)

Rad : 1 x Black Ice Pro 2

[~aoe~]

it's cold wheather here in greece this days :) the ss was taken with the windows open i was ready to run Pi In the Highest clocks i can reache :)

Rad : 1 x Black Ice Pro 2
You're using an old version of CoreTemp that uses a tjunction of 85C for the E4300. Correct tjunction for E4300 is 100, so you will need to add 15C to those temps.

Sorry for the bad news

Edit: later versions of CoreTemp will show the correct tjunction.

[ls206]

Cheers trouble2000 :)

[MrWizard6600]

in this case, the block is mounted fine. Just redo the tubing so that the water goes IN through the center hole and OUT through the corner hole.

bahahah

[zanzabar]

Lowers thermal conductivity. Pure distilled water for best temps :up:

fireice, that looks sweet!


i thought that it was the specific energy of pure watter was higher than a synthetic coolant

[MrMick]

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

The more i see people with black tubing the more i like it :D , black tygon i take it ???

[su3_zero]

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

The more i see people with black tubing the more i like it :D , black tygon i take it ???

lol.... i love it.... i realy like all black pcs!!!

[Tile]

The black tubing and fluid complements the black interior of the case.

[funkflix]

Yeah, black is great! :up:

Now with new motherboard an two chipsetcoolers.

http://www.gravedigga.de/gravedigga/Temp/IMGP2875.jpg

http://www.gravedigga.de/gravedigga/Temp/IMGP2876.jpg

[Waterlogged]

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

The more i see people with black tubing the more i like it :D , black tygon i take it ???

I'm pretty sure this is just black fluid. It has a different, duller "shine" to it than tubing. The rig funkflix post is black tubing.

[bogg]

http://www.gravedigga.de/gravedigga/Temp/IMGP2876.jpg

I love your black OCZ ram cooler. Did you do it yourself? Spraying or by other means?

[FoRdLaZ]

I was just about to ask the same thing - it looks awesome!

[funkflix]

Thanks. I sprayed it black by myself. :)

[trouble2000]

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

The more i see people with black tubing the more i like it :D , black tygon i take it ???

Just black fluid :). Too much work and €€€ to change all the tubing :) I'll do it eventually in a few months :):yepp:

[rsmaverick]

trouble that is a sweet setup. I like how you placed all the rads :P.

[trouble2000]

TKS! :up:

[DarthBeavis]

A quick update:

Before

http://img123.imageshack.us/img123/6608/img3332customcustomfn0.th.jpg (http://img123.imageshack.us/my.php?image=img3332customcustomfn0.jpg)

After

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

One Seagate 160G out, 2 Seagate's single platter in. Ati 2900xt out, 8800 gt in. Changed a rad, changed the fluid, and removed one fan :)

OMg . . .dude u rule . . .

[SeLecT]

Funkflix: Very nice!


Here my rig while testing OC with 4GB DDR3:

http://www.abload.de/img/wakecw.jpg (http://www.abload.de/image.php?img=wakecw.jpg)

[Vatos_locos]

You're using an old version of CoreTemp that uses a tjunction of 85C for the E4300. Correct tjunction for E4300 is 100, so you will need to add 15C to those temps.

Sorry for the bad news

Edit: later versions of CoreTemp will show the correct tjunction.

unfortunaly 0.95 sais the same temp @ load @ idle 0.94 is indeed wrong but it is more stable 0.95 @ load is crushing all the time :( so both core temps 0.95 + 0.94 sais the same temp @ load i don't have any problem that's why i posted the uGuru 23*C @ idle buta when i will open the windows the idle temps is droping very much :)

[Matias23]

Yeah, black is great! :up:

Now with new motherboard an two chipsetcoolers.

http://www.gravedigga.de/gravedigga/Temp/IMGP2875.jpg

http://www.gravedigga.de/gravedigga/Temp/IMGP2876.jpg

Hi nice rig
How are Yours fans Nanoxia and Noiseblocker any good?
Coz i was thinking ordering some for my rig and dont know how good they are? Quiet or loud, CMF?
Thanks

[NysoO]

I've made a few changes in the rig.
Black R3400 tubing, apogee GTX copper top, Asus Maximus formula se (Instead of blitz SE), put the NB-cooling in the main loop, and a few other adjustments.
http://img106.imageshack.us/img106/8703/datornla9.jpg

And my desk :)
http://bandwidth.se/imgs/39/0/img6436.jpg

[disruptfam]

nysoo thats so sweet!!! more pic's!!!

[AAjax]

I've made a few changes in the rig.
Black R3400 tubing, apogee GTX copper top, Asus Maximus formula se (Instead of blitz SE), put the NB-cooling in the main loop, and a few other adjustments.
http://img106.imageshack.us/img106/8703/datornla9.jpg

And my desk :)
http://img403.imageshack.us/img403/3549/img6436hj4.jpg

What fans are those?

[lennox]

i'm loving all the black tubing.

[NysoO]

Thanks guys, will post more pics soon.
The fans are http://www.titan-cd.com/eng/alufan/a12025m12c.htm + polished http://www.sunbeamtech.com/PRODUCTS/Rheobus/Rheobus.htm

[~aoe~]

unfortunaly 0.95 sais the same temp @ load @ idle 0.94 is indeed wrong but it is more stable 0.95 @ load is crushing all the time :( so both core temps 0.95 + 0.94 sais the same temp @ load i don't have any problem that's why i posted the uGuru 23*C @ idle buta when i will open the windows the idle temps is droping very much :)
Yeah, 0.95 is known to cause crashes - I had the same problem with my Q6600. There's a beta version available (0.95.4) that is much more stable and should report the correct temps.

[MrMick]

Just black fluid :). Too much work and €€€ to change all the tubing :) I'll do it eventually in a few months :):yepp:

Me wrong :slapass: still looks great though all black .

[funkflix]

Hi nice rig
How are Yours fans Nanoxia and Noiseblocker any good?
Coz i was thinking ordering some for my rig and dont know how good they are? Quiet or loud, CMF?
Thanks

Fans are good, but i'm using the louder version, at around 7V.

[Talonman]

Thanks. I sprayed it black by myself. :)

What is that metal support around your hose, and where did you order it from?

Looks killer.... :cool:

Do they make it for 1/2" lines too? :)

[MrWizard6600]

every damn time...

I'm sure alot of us go through this: "Ok after this upgrade thats IT im not touching the inside of this case for another EIGHT MONTHS"

2 weeks later, Crossfire X released, and your the owner of a DFI ICFX 3200...

"god damnit... aright fine, sell the HD 2900XT and get three HD 3870s... then THAT IS IT"

2 weeks later, you see this thread, see all the purdy systems.

"FINE $300 on water cooling then THAT IS IT".

yeah.... I'm tired of spending money on my rig... and just earlier today I came to the conclusion that before I put another dollar into it, I'm going to enjoy my 8800GTS. Any money in the computer budget is going to go towards the oh so many killer games out right now...

Well after looking at Matias23's and Nysoo's rigs, among others...

I take it back.

[Bla$nA]

Haha, i also often said, thats it for the next year but there is always something new you can buy for your computer. If it´s new Hardware, new Cooling, new Software. But still cheaper as beeing a Car Tuner or something like that :D

[MrMick]

every damn time...

I'm sure alot of us go through this: "Ok after this upgrade thats IT im not touching the inside of this case for another EIGHT MONTHS"

2 weeks later, Crossfire X released, and your the owner of a DFI ICFX 3200...

"god damnit... aright fine, sell the HD 2900XT and get three HD 3870s... then THAT IS IT"

2 weeks later, you see this thread, see all the purdy systems.

"FINE $300 on water cooling then THAT IS IT".

yeah.... I'm tired of spending money on my rig... and just earlier today I came to the conclusion that before I put another dollar into it, I'm going to enjoy my 8800GTS. Any money in the computer budget is going to go towards the oh so many killer games out right now...

Well after looking at Matias23's and Nysoo's rigs, among others...

I take it back.

You can go daft upgrading all the time but that is the problem with computers , you buy components then it seems a week later they are out of date :p: :( wise idea to spend some money on games with ut3 - crysis - cod4 - gears to name just a few top titles :D .

[Lagier]

Helo everyone!

Here is 5.0 rev od my water cooling system and my new baby... SS TJ07B :D

WC parts:
CPU: beauty :D Swiftech Storm
NB: Swiftech MCW30
GPU: Swiftech MCW60
Pump: Laing DDC 12v
O-Tank 170 + Feser Black UV (with white cathode light feser black looks like granate :| :/ )

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/bok5.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/bok4.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/bok3.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/inside.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/inside1.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/inside4.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/went.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/window.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/window1.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/bok2.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/bok1.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/bok.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/przod.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/przod1.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/przod2.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/przod3.jpg

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/all.jpg


@funkflix
black is great :D my last moded case [CM Stacker] was all in black color (inside and outside) here is some photos ;]

http://lagier.nazwa.pl/foto/hrdwr/Stacker%20WC%20rev%205.0/stack_mod/done/bok3.jpg

http://lagier.nazwa.pl/foto/hrdwr/Stacker%20WC%20rev%205.0/stack_mod/done/window1.jpg

[MorGo7h]

Nice cases ;)

[rsmaverick]

Lagier, AWSOME case man. That is definatly one of my favorites since being on at the forum wooohoo.

[Lagier]

Lagier, AWSOME case man. That is definatly one of my favorites since being on at the forum wooohoo.

:yawn: thanks a lot guys :cool: :D

[Concept 5000-FX]

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/all.jpg

Nice Watch, and cases :up:

[NickS]

Third times a charm? I've had so many watercooled setups and cases its sad. This is the THIRD loop I've purchased. Twice before I sold EVERYTHING and said it's air from now on. Didn't happen. :shrug:

Now, be easy on me. This was with NO MODDING at all to speak of. Well, I removed the metal mesh off the top of the case successfully in one piece in case I ever want to re-install it. I also broke out that crappy plastic design that resides under the mesh too.

http://nickfire.com/public/wcredux/wc3%20002.JPG

ROFL. Funny eh? Works though. 2nd rig is chillin @ left.

http://upload.nickfire.com//files/1/wiringgoodness%20002.JPG

Messy, yes.. but I don't have a window and I threw it together really fast so w/e. Maybe I'll re-do the wiring this weekend after I stop by Home Depot for some zipties.

http://nickfire.com/public/wcredux/wc3%20008.JPG

Pretty clean looking I suppose.

http://nickfire.com/public/wcredux/wc3%20007.JPG

I'm sure you've all seen that.

http://nickfire.com/public/wcredux/wc3%20011.JPG

And finally, a pretty cool pic I snapped. I have to apologize for the pictures. I was really lazy and just put the camera on Auto. As you can see, the ISO was pretty high which resulted in some graininess on the blacks but w/e.

Specs of the watercooling are:

D-Tek Fuzion w/a Backplate that came with a Zalman CNPS8000
MCR-220 (Push-Pull) -- 2x yates pulling, 2x lian li fans pushing
AquaXtreme 50z pump
T-line + DD plug
Distilled w/a hint of Pentosin G11 + PT nuke
7/16" Masterkleer
MX-2 Thermal Paste

[TheSamurai]

imo, i'd turn the rad upside down and have the tubing hanging off the back if you can. it would look much cleaner.

[stormshadow]

were the holes easy to line up on the 690 and that radiator?

[NysoO]

More pics of the Water Inside..

http://bandwidth.se/imgs/39/0/img64d51.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6451.jpg)

http://bandwidth.se/imgs/39/0/img644d9.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6449.jpg)

http://bandwidth.se/imgs/39/0/img64d47.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6447.jpg)

http://bandwidth.se/imgs/39/0/imgd6445.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6445.jpg)

http://bandwidth.se/imgs/39/0/img6d443.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6443.jpg)

http://bandwidth.se/imgs/39/0/img64d41.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6441.jpg)

http://bandwidth.se/imgs/39/0/img644d0.jpg
ZOOM! (http://bandwidth.se/imgs/39/0/img6440.jpg)

Enjoy :)

[NickS]

imo, i'd turn the rad upside down and have the tubing hanging off the back if you can. it would look much cleaner.

Dont'cha think I would've? ;) Theres some plastic from the top bezel portion that I left up there that prevents the radiator from being ~1" back which it'd need to be. Since I wanted to prevent modding because I'm lazy and SICK of modding cases, i did it that way.

were the holes easy to line up on the 690 and that radiator?

Not really. Only got 4 screws in total :p:. the one fan lines up but the other one not so well.

[MrWizard6600]

hey nicks what do you think of those AC fans? do you have the pwm, low speed, or reg?

There really expensive up here (like $10) but they look cool and seem to be pretty good (swiss engineering after all, all purpose knives and DC fans :P).

Worth the ten bux (or $30, for two P180b mounting slots + Thermalright Ultra 120).

[AriciU]

http://lagier.nazwa.pl/foto/hrdwr/tj07b_wc_rev5.0/all.jpg

Nice Watch, and cases :up:

Nice setup you got there! :up:

[NickS]

hey nicks what do you think of those AC fans? do you have the pwm, low speed, or reg?

There really expensive up here (like $10) but they look cool and seem to be pretty good (swiss engineering after all, all purpose knives and DC fans :P).

Worth the ten bux (or $30, for two P180b mounting slots + Thermalright Ultra 120).

Regular one iirc. I LOVE the thing. Probably the quietest fan in my PC as far as motor noise goes. All you hear is the woosh of air. Pushes like 50CFM, its a GREAT fan. If they werent so expensive I'd have more.

[disruptfam]

AWESOME NYSoo !!! i like it alot!

[fireice2]

Nice setup! :up:

Black is really nice!

[pphx459]

Nice cases fellas, just wondering where you guys buy your compression fittings from??

[De5tr0yer]

http://img57.imageshack.us/img57/3429/img3924customdz1.th.jpg (http://img57.imageshack.us/my.php?image=img3924customdz1.jpg)

The more i see people with black tubing the more i like it :D , black tygon i take it ???

how do u make the water black?

maybe ink?:)

[trouble2000]

how do u make the water black?

maybe ink?:)

http://www.feser-one.com/site/product_info.php?cPath=68&products_id=264

[ownage]

A little update:
http://img.techpowerup.org/071206/IMG_2502.jpg

[CyberDruid]

That is a very pleasant looking loop. You seem to have a real feel for making something look mellow.

[De5tr0yer]

A little update:
http://img.techpowerup.org/071206/IMG_2502.jpg

I don't like the bending of the tubing there... doesn't much, but still kills the waterflow.

[ownage]

I don't like the bending of the tubing there... doesn't much, but still kills the waterflow.

It's nog a big problem, and it doesn't bend to much, and i'm to lazy to change it :p: I got a new board, which i will install tomorrow, MSI P35 neo2-FR :D

[Papu]

heres my rig
e6420 @ 3.4
2900xt
2gigs of pc8500 mushkin
1.25Tb storage
d-tek fuzion
mcr 220
Swiftech MCRES-MICRO
Laing DDC-2
http://img338.imageshack.us/img338/4338/dscf0287fe6.jpg
custom cut window , with black limo tint film
http://img141.imageshack.us/img141/4840/dscf0288yj5.jpg
http://img132.imageshack.us/img132/6599/dscf0229wd1.jpg
http://img413.imageshack.us/img413/4851/dscf0232ci4.jpg
http://img523.imageshack.us/img523/9800/p1020170zu7.jpg
modded my rad into the front of my case :D

enjoy

[rsmaverick]

Papu, what kind of case is that?

[Papu]

Papu, what kind of case is that?

hehe its a jeantech nitro , heavly modded , front fans replaced with led Yoons , it cost me 60 euros in the local Pcworld :D
http://img529.imageshack.us/img529/7796/p1010501uk7.jpg

[Omastar]

how do u make the water black?

maybe ink?:)

Black Tygon tubing. Also negates the need for an anti-algae agent such as Pentosin, I'd think, since the opacity prevents algae feeding off light.

[CyberDruid]

http://img467.imageshack.us/img467/7690/finaleqm8135ek2.jpg
http://img476.imageshack.us/img476/7197/finaleqm8136yf8.jpg
http://img476.imageshack.us/img476/8083/finaleqm8134zj1.jpg
http://img476.imageshack.us/img476/9220/finaleqm8127bt7.jpg
http://img476.imageshack.us/img476/5813/finaleqm8124gu9.jpg
http://img476.imageshack.us/img476/2718/finaleqm8120zb3.jpg
http://img467.imageshack.us/img467/1237/finaleqm8119td3.jpg
http://img476.imageshack.us/img476/6863/finaleqm8118px3.jpg
http://img467.imageshack.us/img467/2842/finaleqm8117jm0.jpg
http://img476.imageshack.us/img476/3971/finaleqm8113de9.jpg
http://img476.imageshack.us/img476/622/finaleqm8096to3.jpg
http://img467.imageshack.us/img467/2694/finaleqm8090ky9.jpg
http://img477.imageshack.us/img477/3086/finaleqm8088cc4.jpg
http://img467.imageshack.us/img467/7696/finaleqm8091lk6.jpg
http://img467.imageshack.us/img467/9210/finaleqm8085oi2.jpg
http://img467.imageshack.us/img467/4580/finaleqm8083qq3.jpg
http://img467.imageshack.us/img467/2044/finaleqm8082ay1.jpg
http://img468.imageshack.us/img468/3130/1016508fu6.jpg

:D

ZOMG not another Temjin...when will it end:nuts:

[Tile]

That's awesome !! Martin's copper elbows look factory spec. I like the fact that there are no wires behind the motherboard tray.

[azn_bboy07]

mang that is a piece of art brother!!!

[iadstudio]

Not sure I understand the pump--res orientation. How does the pump intake in the bottom of the res work out for you?

[rabor]

Like he said, it's a pully..

(and a very nice one, if I may say so :up: )

[disruptfam]

cyber druid you are a legend mate!!! love all your setups!! :)

keep em coming!!!

i suggest a v2000 setup !!! woohoo

[Spuggi]

http://www.abload.de/img/img_2002_filteredkop5lu.jpg (http://www.abload.de/image.php?img=img_2002_filteredkop5lu.jpg)
http://www.abload.de/img/img_2007_filteredklfga.jpg (http://www.abload.de/image.php?img=img_2007_filteredklfga.jpg)

[TheJollyFellow]

love the black and white, it's so...colorful! :D

[disruptfam]

love the black and white, it's so...colorful! :D

+1

i've got back and white in my rig aswell

[AAjax]

+1

i've got back and white in my rig aswell
I like the rad enclosure

[0xdeadbeef]

@CyberDruid:
I like your hose clips. Clean and simple. Where can I find them?

[911us]

http://www.feser-one.com/site/product_info.php?cPath=68&products_id=264

And how did you cut the fan holes perfectly for LianLi case ?..It is really interested me.

[Roch]

I like the rad enclosure

Ditto, wonder if you could squeeze a thermochill in there?

[Spuggi]

Ditto, wonder if you could squeeze a thermochill in there?

Why? It's a powerfull HTSF inside ;)

[TheSamurai]

Dont'cha think I would've? ;) Theres some plastic from the top bezel portion that I left up there that prevents the radiator from being ~1" back which it'd need to be. Since I wanted to prevent modding because I'm lazy and SICK of modding cases, i did it that way.

just realized who i wrote that too lol. ;)

[Pudi]

I love it, small and beautiful

[krueml_]

http://www.4eweb.de/pc/crossfire/crossfire01.jpg

http://www.4eweb.de/pc/crossfire/crossfire02.jpg

http://www.4eweb.de/pc/crossfire/crossfire03.jpg

[rafwlkp]

Oh my godnes lord ! That is owesome !!!
A want more pictures :)

[MorGo7h]

Is 1 CF bridge enough?

[pvtdonuts]

technically yes, the extra bridges are for tri and quad crossfireX, but most people, including me put 2 on cuz it looks better.

[MorGo7h]

technically yes, the extra bridges are for tri and quad crossfireX, but most people, including me put 2 on cuz it looks better.

Thx
I'm thinking of buying 2 3780's too :p:
But then I need a 2nd loop :(

[CyberDruid]

http://www.4eweb.de/pc/crossfire/crossfire01.jpg

http://www.4eweb.de/pc/crossfire/crossfire02.jpg

http://www.4eweb.de/pc/crossfire/crossfire03.jpg

ZOMG that is really a tight loop: perfection! In fact it looks like a damn RENDER it's so perfect :up:

[TheSamurai]

wow... that just made me... nevermind. it's beautiful!

[leo_bsb]

it will be a tight curve for that bottom fitting. I want to see some installed pictures.

[Papu]

needs 2 more sticks of ram :D

[Istasi]

Which cards are those?

I've never seen a vid card with a single 8-pin.

[Tile]

That's pure art. I like the decision made by AquaComputer to use G1/4 threads on their new waterblocks.

[CyberDruid]

@CyberDruid:
I like your hose clips. Clean and simple. Where can I find them?

I get mine from McMaster Carr. They are called pinch clamps. They have two types: one for high durometer tubing and one for low durometer tubing.

[SiNiSon]

Shhh..



Taking some shots in the dark this week...

[CyberDruid]

Very nice

[lennox]

isn't your D5 pushing into the fillport?

ps: did you sleeve all 24 wires seperately for the mobo connector? wow

[CyberDruid]

I think it is clear from the pictures above.

[SiNiSon]

ps: did you sleeve all 24 wires seperately for the mobo connector? wow

Yeah.. it was a small error in measurements on our part that added many hours to dismantle the mobo connector and sleeve every wire.. ugg..

[Evil-Vincent]

No way Sinison, that has to be the most beautiful TJ07 I have ever seen! The picures are awesome aswell. Now I am really ashamed of mine :$

[emoners]

No way Sinison, that has to be the most beautiful TJ07 I have ever seen! The picures are awesome aswell. Now I am really ashamed of mine :$

i AGREE! :up: :up: :up:

Great job SiNiSon!:up: do you have a work log on that?:D

[Origin_Unknown]

SiNiSon that is one amazing case. The sleving of every ATX wire and the VFD in the case are two very nice touches.

[tiro_uspsss]

Yeah.. it was a small error in measurements on my part that added many hours to dismantle the mobo connector and sleeve every wire.. ugg..

dude.. it was worth it from where i'm standing :up: u make cables look good/cool :yepp:

[cuke2u]

Here's mine:

Top view:
http://i42.photobucket.com/albums/e332/cuke2u/P8270007.jpg

Side/top view:
http://i42.photobucket.com/albums/e332/cuke2u/P8270008.jpg

Radiator barbs:
http://i42.photobucket.com/albums/e332/cuke2u/P8270009.jpg

Reservoir and pump mounting:
http://i42.photobucket.com/albums/e332/cuke2u/DSC00365.jpg

Finished:
http://i42.photobucket.com/albums/e332/cuke2u/DSC00371.jpg

Chris

[Xilikon]

Very amazing work there, SiNiSon :)

I especially loved the sleeved ATX connector, gave me some ideas. I wonder where did you get the braided blue SATA cables ?

[kinghong1970]

SiNiSon, what is that display unit with the temps? that's very nice...

also, where did you get your SATA cables, sleeved also?

amazing dude...

[CyberDruid]

I went to Murderbox.com straight away hoping to find even more pics...oh well.

Lots of great ideas to steal anyway :D

[~aoe~]

http://www.westmediafilm.com/mb003_0296.jpg
Wow - very impressed. You even went to the trouble of inverting the motherboard tray.

I also checked out your website but found nothing other than a teasing image and an email link. I'm guessing the site is a work in progress ?

[Patriote]

Pics of my completed XETM Project... Finally! Enjoy!

http://i242.photobucket.com/albums/ff168/Xtreme_Patriote/XETM/IMG_5747.jpg

http://i242.photobucket.com/albums/ff168/Xtreme_Patriote/XETM/IMG_5777.jpg

http://i242.photobucket.com/albums/ff168/Xtreme_Patriote/XETM/IMG_5784.jpg

http://i242.photobucket.com/albums/ff168/Xtreme_Patriote/XETM/IMG_5762.jpg

More pics in my worklog here : http://www.xtremesystems.org/forums/showthread.php?t=160457&page=12

Quick and non-final Ocing results :

http://i242.photobucket.com/albums/ff168/Xtreme_Patriote/XETM/395Ghz_494Mhz_Super_PICore2.jpg

http://i242.photobucket.com/albums/ff168/Xtreme_Patriote/XETM/395Ghz_494Mhz_3DMark06.jpg

[Astratuner]

wow SiNiSon nice tj07, cant wait untill i get mine :D

Patriote yours is finger licking case mamte!

[emoners]

I went to Murderbox.com straight away hoping to find even more pics...oh well.

Lots of great ideas to steal anyway :D

Hahahaha I did exactly the same thing!:rofl:

@SiNiSon: More pics please... or maybe a worklog :D

[~aoe~]

@Patriote

It was seeing your avatar of your case on these forums that triggered my decision to attempt water cooling. This has now become an addiction.

You have a lot to answer for :rofl:

[Astratuner]

Did the murderbox guy switch the place of the motherboard from the right of the case to the left ?

And also the right side has now a window ? Shouldn't that be normally left side that had the window?

[leoftw]

where do you guys get those cubes from . I like how they look

[Origin_Unknown]

also, where did you get your SATA cables, sleeved also?


i'd say he did them himself.

[SparkyJJO]

where do you guys get those cubes from . I like how they look

mountainmods.com

[lennox]

I think it is clear from the pictures above.

heh, I was actually asking if he did it himself or if it came like that. thanks for trolling :clap:

[peterpiper]

T.I.D.Y..

Shh..

http://www.westmediafilm.com/mb003_0025.jpg
http://www.westmediafilm.com/mb003_0058.jpg
http://www.westmediafilm.com/mb003_0089.jpg
http://www.westmediafilm.com/mb003_0153.jpg
http://www.westmediafilm.com/mb003_0239.jpg
http://www.westmediafilm.com/mb003_0296.jpg
http://www.westmediafilm.com/mb003_0622.jpg
http://www.westmediafilm.com/mb003_0754.jpg
http://www.westmediafilm.com/mb003_0796.jpg
http://www.westmediafilm.com/mb003_0884.jpg

Taking some shots in the dark this week...

[Tile]

This case is absolute art. The most impressive are the bay cover, the divider mounted LCD and the interiot paint job.

[fireice2]

after looking at this one, i'm thinking of redoing my loop. :D

[Matias23]

Beautifull Case i think i will redoing my as well but waiting till Feb for new hardeware to be relised I have few new ideas as well.
What is this LCD v nice.

[ka lok]

Just changed the colour of me waters! Shudnt have bothered after seeing SiNiSon's peice of loveliness!!;)

Excellent work SiNiSon :clap:, am very envious of your set up!!

[Burn]

Got some good ideas from the Murderbox :D I would love to see some more pictures of that thing, it's absolutely gorgeous.


@ Sinison, what diameter sleeving and heatshrink did you use to sleeve the SATA connectors?

[CyberDruid]

Kind of wondering about some of the unpictured details like HDD cooling...

The face plate is a great look.

[Waterlogged]

Shh..

http://www.westmediafilm.com/mb003_0153.jpg
http://www.westmediafilm.com/mb003_0296.jpg

Taking some shots in the dark this week...

With zero disrespect meant to the rigs that follow it, the next few pages are gonna seem kind of lame. That is an absolute work of art and gets my vote for rig of the year. :clap:

[rsmaverick]

All I can say is wow...That must have taken a very long time...

[NysoO]

Sinison, very nice case. How the hell do you get the pictures so perfect? What kind of lightsource? Staging?
More pics would be nice! :D

[CyberDruid]

The pictures are perfect. I want to see more details. Pop the other side please :)

[Zeus]

Everybody must be blinded by the beauty of this "murdercase" that noone sees it has the fuZion mounted upside down.

Other than that, it's a frikkin piece of art. :up:

[Spawne32]

that is the sexiest thing i have ever seen, minus that 680i board.

[CyberDruid]

I like that faceplate.

[marauder16]

Everybody must be blinded by the beauty of this "murdercase" that noone sees it has the fuZion mounted upside down.

Other than that, it's a frikkin piece of art. :up:

it doesn't matter if it is bled properly ;)

[funkflix]

Just awesome SiNiSon! :up: :eek:

[darkorb]

sinison that looks absolutely amazing. and ontop of that, u deff no how to take some photos!!

bookmarked your pics man, that is :banana::banana::banana::banana:ign AWESOME!!!

[disruptfam]

yeah man is that photoshopped??

[Dooglas]

How long did it take to make the murderbox? You should sell those cases, they are beautiful.

[cegras]

I'm most interested in that panel you've got going there - what's the make and what can it do?

[DShankar]

:shocked: Is there any more info on the Murderbox? Is it a custom case? Or a Lian-Li mod? Anything? I'm dying in my own dr00l man! :D

[SiNiSon]

i'd say he did them himself.

That is correct.... hand sleeved.

We are working on some more pics (dark ones to show the UV) and the website will go up soon.. there is no photoshop work outside of cleaning noise and color correction. The picture are just taken with a Nikon d70s with a 28mm lens and one soft light.. the computer sits on a table with a seamless back taped to the wall... thats what makes it look so clean.. its just a very nice piece of wallpaper really :)

We basically wanted to take what is a great very high-quality stock case and make is something unique and special. There are a lot of small details that I knew only this community could appreciate or even see. I have been a long time lurker and as someone who has taken a lot of great tips from this forum I was excited to show the finished product off before the site and public get to see them.

There is quite a bit of custom fab work the for the front plate and so on (the top little round detail at the top of the front plate acts as a touch button to open the CD tray)

Hard drive cooling... there are 3 drives mounted vertically under the DVD with a low speed 120mm fan on top.. there is one 120mm fan in the top grate we have done everything to kill the machine while keeping it as quiet as possible under extreme loads. We have had no issues with flow rates or temps with the loop configured like this.

The screen is a Matrix Orbital USB item. We have it set up to rotate thru system vitals (FPS, all temps for CPU,GPU,Disks etc.. drive usage,Clock speeds)
http://www.matrixorbital.com/

Currently it has a 6600@3.2 and a 8800 Ultra OC'd a bit. (praying for an Extreme price drop soon :) )

The case can be configured with the MB on either side depending one how you like it, I prefer this way as its unique and opens the case up quite alot visually.. (the flipped is the much more difficult configuration :eek: )

Assembly is not that bad, the hardest part is being methodical and slow with all the anodized items. The R&D to get this case from stock to this has been a long and grueling process.. the rigs eventually will be built for some locals here basically as custom built top of the line type rigs.. its the start of a small business for a friend and me, and we have put a great deal of time and effort into it to get it to this point..

Oh and in the shot of the Matrix screen you can spot some of the lighting.. the case has full UV lighting but its all pretty hidden..

I think every case in the post is great.. modding is a very fun and personal thing.. there are some pretty crazy and great rigs here..

[Patriote]

@Patriote

It was seeing your avatar of your case on these forums that triggered my decision to attempt water cooling. This has now become an addiction.

You have a lot to answer for :rofl:

Thank you :) If you have any questions, you can PM me. It'll be a pleasure to answer them. When i get time :rolleye: Heh

PS: Mountainmod.com for those cube cases.

[adidassler]

@sinison

what coolant are you using?

[CyberDruid]

That is correct.... hand sleeved.

We are working on some more pics (dark ones to show the UV) and the website will go up soon.. there is no photoshop work outside of cleaning noise and color correction. The picture are just taken with a Nikon d70s with a 28mm lens and one soft light.. the computer sits on a table with a seamless back taped to the wall... thats what makes it look so clean.. its just a very nice piece of wallpaper really :)

We basically wanted to take what is a great very high-quality stock case and make is something unique and special. There are a lot of small details that I knew only this community could appreciate or even see. I have been a long time lurker and as someone who has taken a lot of great tips from this forum I was excited to show the finished product off before the site and public get to see them.

There is quite a bit of custom fab work the for the front plate and so on (the top little round detail at the top of the front plate acts as a touch button to open the CD tray)

Hard drive cooling... there are 3 drives mounted vertically under the DVD with a low speed 120mm fan on top.. there is one 120mm fan in the top grate we have done everything to kill the machine while keeping it as quiet as possible under extreme loads. We have had no issues with flow rates or temps with the loop configured like this.

The screen is a Matrix Orbital USB item. We have it set up to rotate thru system vitals (FPS, all temps for CPU,GPU,Disks etc.. drive usage,Clock speeds)
http://www.matrixorbital.com/

Currently it has a 6600@3.2 and a 8800 Ultra OC'd a bit. (praying for an Extreme price drop soon :) )

The case can be configured with the MB on either side depending one how you like it, I prefer this way as its unique and opens the case up quite alot visually.. (the flipped is the much more difficult configuration :eek: )

Assembly is not that bad, the hardest part is being methodical and slow with all the anodized items. The R&D to get this case from stock to this has been a long and grueling process.. the rigs eventually will be built for some locals here basically as custom built top of the line type rigs.. its the start of a small business for a friend and me, and we have put a great deal of time and effort into it to get it to this point..

Oh and in the shot of the Matrix screen you can spot some of the lighting.. the case has full UV lighting but its all pretty hidden..

I think every case in the post is great.. modding is a very fun and personal thing.. there are some pretty crazy and great rigs here..


Great Post!

That's exactly what I was curious about. Man you slipped that UV lighting right past me...I still don't see it: WIZARDRY! And the HDD Cooling: Brilliant

Thanks for confirming the display..I thought it might have been a Matrix...

Again: impressed me immensely.

I must step up my game!

[emoners]

That is correct.... hand sleeved.

We are working on some more pics (dark ones to show the UV) and the website will go up soon.. there is no photoshop work outside of cleaning noise and color correction. The picture are just taken with a Nikon d70s with a 28mm lens and one soft light.. the computer sits on a table with a seamless back taped to the wall... thats what makes it look so clean.. its just a very nice piece of wallpaper really :)

We basically wanted to take what is a great very high-quality stock case and make is something unique and special. There are a lot of small details that I knew only this community could appreciate or even see. I have been a long time lurker and as someone who has taken a lot of great tips from this forum I was excited to show the finished product off before the site and public get to see them.

There is quite a bit of custom fab work the for the front plate and so on (the top little round detail at the top of the front plate acts as a touch button to open the CD tray)

Hard drive cooling... there are 3 drives mounted vertically under the DVD with a low speed 120mm fan on top.. there is one 120mm fan in the top grate we have done everything to kill the machine while keeping it as quiet as possible under extreme loads. We have had no issues with flow rates or temps with the loop configured like this.

The screen is a Matrix Orbital USB item. We have it set up to rotate thru system vitals (FPS, all temps for CPU,GPU,Disks etc.. drive usage,Clock speeds)
http://www.matrixorbital.com/

Currently it has a 6600@3.2 and a 8800 Ultra OC'd a bit. (praying for an Extreme price drop soon :) )

The case can be configured with the MB on either side depending one how you like it, I prefer this way as its unique and opens the case up quite alot visually.. (the flipped is the much more difficult configuration :eek: )

Assembly is not that bad, the hardest part is being methodical and slow with all the anodized items. The R&D to get this case from stock to this has been a long and grueling process.. the rigs eventually will be built for some locals here basically as custom built top of the line type rigs.. its the start of a small business for a friend and me, and we have put a great deal of time and effort into it to get it to this point..

Oh and in the shot of the Matrix screen you can spot some of the lighting.. the case has full UV lighting but its all pretty hidden..

I think every case in the post is great.. modding is a very fun and personal thing.. there are some pretty crazy and great rigs here..

more pics!:D

[dnb#]

...
The screen is a Matrix Orbital USB item. We have it set up to rotate thru system vitals (FPS, all temps for CPU,GPU,Disks etc.. drive usage,Clock speeds)
http://www.matrixorbital.com/...

I checked the matrixorb website, and I definately want one of those, but can you tell me which vfd/lcd you have? and is it as simple as just plug the usb?
Or do you have to solder stuff? Does it comes with software for the lcd or are there software apps on the i-net you used?

I really like to know all about those lcd's!

Can you send me a pm or something?

Thanks in advance KING/GENERAL/MASTER Sinison :)

[~aoe~]

Just changed the colour of me waters!

http://www.xtremesystems.org/forums/attachment.php?attachmentid=68531&stc=1&d=1197321940

That's actually quite good for red. Certainly not the pink we're used to seeing :p:

What colourant did you use?

[adidassler]

@dnb#

hey mate, how are you? you know im having a hard time getting the Tec Protect UV Blue from USA, any other options? would you help me get one? i can send money for you to buy me one including the shipping... i really want to have one... Thanks

[Xilikon]

I checked the matrixorb website, and I definately want one of those, but can you tell me which vfd/lcd you have? and is it as simple as just plug the usb?
Or do you have to solder stuff? Does it comes with software for the lcd or are there software apps on the i-net you used?

I really like to know all about those lcd's!

Can you send me a pm or something?

Thanks in advance KING/GENERAL/MASTER Sinison :)

Look like a http://www.matrixorbital.com/product_info.php?pName=vk20425usb&cName=lcd-character-vfds for me but with a different color (I was unable to find the right colored one on the site). It plug with a usb cable and you control it via software (LCDC (http://www.lcdc.cc/) I think).

It's pretty easy to setup :)

[ka lok]

That's actually quite good for red. Certainly not the pink we're used to seeing :p:

What colourant did you use?

Hi there, I actually cheated sort of... used food colouring coz i just couldnt find a red dye. Tried dtek uv fire red and it turned pink on me.

Was contemplating using fluid xp blood red but apparently it leaves solid residue and costs £27.99 here in UK :shocked:.

I know food dye will possibly leave residue but at least I only paid 22p for it!!

I think someone mentioned that all dyes will become soild after a while, (Might have been Marci from my recollection) please correct me if Im wrong

[kinghong1970]

i think i'm going to stop by and pick up a pack of KoolAid... :D

[SiNiSon]

A shot from the back... ill post more after we do the UV shots..

[rsmaverick]

good god. The rear is cleaner then most of normals cases front side.

[Walternowi]

SiNiSon,

I am speechless :clap::clap::clap:

[Pudi]

SINISON

truly anal attention to detail :bows:

[awhir]

A shot from the back... ill post more after we do the UV shots..

http://www.westmediafilm.com/mb003_0288.jpg


wow class case and also great camrea work what ya usin ?

[~aoe~]

Posted earlier:
The picture are just taken with a Nikon d70s with a 28mm lens and one soft light.. the computer sits on a table with a seamless back taped to the wall... thats what makes it look so clean.. its just a very nice piece of wallpaper really :)

[dnb#]

Look like a http://www.matrixorbital.com/product_info.php?pName=vk20425usb&cName=lcd-character-vfds for me but with a different color (I was unable to find the right colored one on the site). It plug with a usb cable and you control it via software (LCDC (http://www.lcdc.cc/) I think).

It's pretty easy to setup :)

I wonder where you can buy those in the Netherlands...:rolleyes:

I want one NOW! :D

[Solaris]

A shot from the back... ill post more after we do the UV shots..
[PIC OF THE BACK]


Haha, I'm thinking of doing the exact same thing for my project, It's the only way of getting around tight bends such as this with such a massive cable.

Excellent work!:yepp:

[dnb#]

I've made a wallpaper of the Murderbox, I was a bit bored and I thought the most beautiful pc of the world must have an wallpaper ;)

it's nothing special, just a 2 minutes job in photoshop!
I think it's beautiful as a desktop.

HERE IT IS: http://aycu09.webshots.com/image/22128/2005473735902127425_rs.jpg

[adidassler]

@sinison

hey mate, what uv coolant are you using? Thanks...
i love dnb#'s Coolant same as yours...

Thanks!

[Clockwork_Apple]

Very impressive attention to detail SiNiSon, I've never seen such a clean build. Is there a worklog anywhere?

[Nate P.]

I'm speechless, Sinison... makes my build look like a pile of sh1t.

[step]

Beautiful build there Sinison, did it take much effort changing the mobo orientation?

[rehpyc]

What type of sleeving is being used? I may attempt to do such a clean sleeving job with my own cables after seeing the beauty of your work, haha.

[Nate P.]

What type of sleeving is being used? I may attempt to do such a clean sleeving job with my own cables after seeing the beauty of your work, haha.
Performance PCs (http://www.performance-pcs.com/catalog/index.php) has all the different sleevings imaginable.

[disruptfam]

A shot from the back... ill post more after we do the UV shots..

http://www.westmediafilm.com/mb003_0288.jpg

man this make my want to do my cable management again :(

so clean mine looks like a crackhouse compared to that

[disruptfam]

I'm speechless, Sinison... makes my build look like a pile of sh1t.

mine 2 nate miiiiiiiiiiiiiiiine 2 :(

"jumps off a bridge"

[sladesurfer]

Shh..

http://www.westmediafilm.com/mb003_0296.jpg

Taking some shots in the dark this week...

Hows your temp inside the case? I notice you dont have any exhaust fan or intake fan.

[disruptfam]

sinison what mode on your camera do you you use to take such great pics?

[funkflix]

sinison what mode on your camera do you you use to take such great pics?

I would say he used just manual settings. ;)

An older picture of my system, with some intel hardware -

http://www.gravedigga.de/gravedigga/PC1/5.jpg

[nzbleach]

Sinison, what method did you use to achieve the perfect matt black finish to the case chassis.

[Nate P.]

Sinison, what method did you use to achieve the perfect matt black finish to the case chassis.
Probably a custom power coat.;)

[SiNiSon]

Hows your temp inside the case? I notice you dont have any exhaust fan or intake fan.

Temps all round are very low.. there are 2 120mm fans in the upper part of the case (one over the HD's) one in the top grate that pull air up and out.. the lower part of the case has 2 120mm on the rad that pull air across the lower section.

[SiNiSon]

Probably a custom power coat.;)

Correct a lot of parts are custom powder coated..

[sladesurfer]

Temps all round are very low.. there are 2 120mm fans in the upper part of the case (one over the HD's) one in the top grate that pull air up and out.. the lower part of the case has 2 120mm on the rad that pull air across the lower section.

nice! God, i want one of your cases. I dont care if i didnt build it. It looks so freakin awesome. :shocked:

[jabski]

With zero disrespect meant to the rigs that follow it, the next few pages are gonna seem kind of lame. That is an absolute work of art and gets my vote for rig of the year. :clap:

no one has posted any pics since lol

[DShankar]

I would say he used just manual settings. ;)

An older picture of my system, with some intel hardware -

What motherboard is that? Is the 680i Black Pearl? Is it the same one that Sinison has in his murderbox?

[adidassler]

@sinison

hey mate, what uv coolant are you using? Thanks...
i love dnb#'s Coolant same as yours...

Thanks!

Hows your temp inside the case? I notice you dont have any exhaust fan or intake fan.

[funkflix]

What motherboard is that? Is the 680i Black Pearl? Is it the same one that Sinison has in his murderbox?

No, it is a Asus P5B Deluxe.

[dnb#]

Now definately going to paint the "adapter-hold-down" bracket of my Swiftech GTX black. I was thinking about that a few weeks ago, but now I'm sure. It'll look great with the copper top Welshtom sent me :)

[Waterlogged]

no one has posted any pics since lol

Well, I actually meant from SiNiSon's initial posting of his rig. There have been a few poor souls (and rigs) that have posted since. They are cuke2u, Patriote, ka lok, and funkflix. Let us now bow our heads for a moment of silence to remember these individuals....OK, everyone back to praising SiNiSon's rig. :yepp: I think it'll be another few pages before we get over it enough to actually see the other rigs being posted.

[madmaxx]

i saw it, looked nice.

i liked it VERY much :up:

can we have some more?

:yepp:

[k0la]

Performance PCs (http://www.performance-pcs.com/catalog/index.php) has all the different sleevings imaginable.
Any difference between the Techflex that Performance PC's is selling compared to the AC Ryan stuff?

[santica]

http://bp2.blogger.com/_jCDrjpNbRxc/R1_i8CeNTgI/AAAAAAAAADU/p-0CKvt82WY/s1600-h/IMG_1318.JPG
http://bp2.blogger.com/_jCDrjpNbRxc/R1_h6CeNTfI/AAAAAAAAADM/WsMWnItKP3s/s1600-h/IMG_1317.JPG


http://strangebuilds.blogspot.com/

Just opened an blog for uploading images

[Xilikon]

Well, I actually meant from SiNiSon's initial posting of his rig. There have been a few poor souls (and rigs) that have posted since. They are cuke2u, Patriote, ka lok, and funkflix. Let us now bow our heads for a moment of silence to remember these individuals....OK, everyone back to praising SiNiSon's rig. :yepp: I think it'll be another few pages before we get over it enough to actually see the other rigs being posted.

Myself, I will have the balls to post my own build (not as great as SiNiSon's build but very good imho) but the problem is that mine isn't finished yet... welshtom, hurry up and make me proud of your magic with lasercutting :D

[CyberDruid]

I dunno if I can post any more stuff here after that...

[dnb#]

no you better don't I think ;) Your cases look really good but I think we're all going to avoide your pics :D

I'm looking at sinisons pics for about 2 days now and still can't get enough taking a look. I'm really busy @ work at the moment but this has priority number one :D

[k0la]

@ Sinison, what diameter sleeving and heatshrink did you use to sleeve the SATA connectors?
Something I'd like to know too.

[Matias23]

Hi
You have to use Heatshrink Sleeving 4:1 Ratio.
But if You live in UK then go to CPC and and this is a item nr. CB100017
I know coz i have done it myself 2 weeks ago

[Dr. Wakeman]

Correct a lot of parts are custom powder coated.. a few phone calls yielded a shop whose manager was an avid modder... if you find a friendly company its not that expensive.


Wow nice Temjin SiNiSon! :clap:

Which Parts are powder coated and which parts are anodized?

[Movieman]

I dunno if I can post any more stuff here after that...

Apples and Oranges my friend.
Yours are artwork in their own way and if you stop posting them
I will have to go on a road trip to your house!:D

[HaGGaRd]

Just posting a PC that I took photo's of when I was at an event called i32 in England, Newbury

Enjoy

Project:
Mountain Mods: Ascension

Ah and I used photoshop to blur out the background so you can get a better view of the computer itself :rolleyes:

http://i80.photobucket.com/albums/j161/HaGGaRd1337/ufo1.jpg

http://i80.photobucket.com/albums/j161/HaGGaRd1337/ufo4.jpg

http://i80.photobucket.com/albums/j161/HaGGaRd1337/ufo2.jpg

http://i80.photobucket.com/albums/j161/HaGGaRd1337/ufo3.jpg

http://i80.photobucket.com/albums/j161/HaGGaRd1337/ufo5.jpg

[SiNiSon]

Apples and Oranges my friend.
Yours are artwork in their own way and if you stop posting them
I will have to go on a road trip to your house!:D

I agree...

[adidassler]

I agree...

@sinison

:( could you please share what coolant are you using? thanks...




...for the third time... Lols...

[adidassler]

@haggard

i thought it was PATRIOTE's Rig! Looks so similar...

[HaGGaRd]

Yeh lol ^^

[Pudi]

http://i80.photobucket.com/albums/j161/HaGGaRd1337/ufo4.jpg



wow some serious money spend on that rig :eek:

[AAjax]

I dunno if I can post any more stuff here after that...

You better post more... :D

[ka lok]

Well, I actually meant from SiNiSon's initial posting of his rig. There have been a few poor souls (and rigs) that have posted since. They are cuke2u, Patriote, ka lok, and funkflix. Let us now bow our heads for a moment of silence to remember these individuals....OK, everyone back to praising SiNiSon's rig. :yepp: I think it'll be another few pages before we get over it enough to actually see the other rigs being posted.

Thank you for the rememberance:up: Can go to a better place knowing that I have seen Gods Creative brilliance exemplified by the murderbox:p:

[pattherat111]

HaGGaRd

just a couple of questions
1. Where did you pick up the lcds and for how much

2. What do the lcds display

BTW its a nice looking rig in the wake of sinson's monster work of art well done:up: :up: :clap: :clap:

[DShankar]

HaGGaRd

just a couple of questions
1. Where did you pick up the lcds and for how much

2. What do the lcds display

BTW its a nice looking rig in the wake of sinson's monster work of art well done:up: :up: :clap: :clap:

They are Thermaltake Retractable 7" screens for 5.25" drive bays. You can buy them at: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2844211&CatId=340.

[Nate P.]

They are Thermaltake Retractable 7" screens for 5.25" drive bays. You can buy them at: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2844211&CatId=340.
Wait a minute... 7" in 5.25"?! Can't be...:rolleyes:

[fireice2]

Its possible since 7" is a diagonal measurement.

[jinu117]

I am in process of cleaning up some old posts in here that has dead links, etc and useless and eyesore now. It will take some time to get through but just wanted to let you guys know. I think I worked on first 15 pages of it last night -_-;
Okay, managed to get through and there were about 8 pages of junk total. Not bad but it would be advisable to use reputable server for hosting image for sticky materials...


All the oldies with broken links are getting moved to:
http://www.xtremesystems.org/forums/showthread.php?t=169205&highlight=gallery+junk

[Nate P.]

Its possible since 7" is a diagonal measurement.
Compatibility: Case with 7" Drive Bay
Looks like you need a special drive bay.

[DShankar]

Looks like you need a special drive bay.

No you don't. It fits like a normal DVD/CD 5.25" drive.

[Nate P.]

No you don't. It fits like a normal DVD/CD 5.25" drive.
Hmm...

[pattherat111]

They are Thermaltake Retractable 7" screens for 5.25" drive bays. You can buy them at: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2844211&CatId=340.

thanks for the link

[YugenM]

Wait a minute... 7" in 5.25"?! Can't be...:rolleyes:

"5.25 inch" drive bay is actually closer to 6" horizontal

[Waterlogged]

Those stupid LCD's are originally meant for the Mozart TX cases which actually (from my understanding) have 7" bays but have a converter that makes mounting 5.25 possible in them. IIRC, that's also the same size as North American car radios.

Seeing that is a custom MM, a 7" bay (or two) wouldn't have been that much of a problem to put in the case.

[pattherat111]

yes it wouldnt be hard but at 300$ a piece not a cheap solution to whateva your requirements are

[Stijndp]

Hmm...

Don't start buying that LCD and believing that it will fit your 5.25" :)

It's meant for the 7" bay in the mozart and don't let anyone tell you otherwise :rofl:

[jspace]

Guys, remember monitors are measured diagonally. Using fancy math; a 7" screen in a 5.25" bay would be ~4" high (3.99).
I'm not doubting you Stijndp, just letting people know it's possible to get a near 7" screen in a 5.25 bay. Also if you look closely at the case, the bays for the LCDs are wider. At least it seems that way.

[HaGGaRd]

Yeah the LCD displays are bigger than 5.25"s, they custom cut the bays to a bigger size to fit the screens into place. And to answer the question on what they are used for they used them as a second/third monitor...


:D

[CyberDruid]

That case should get a prize for Overkill-Bling.

[DShankar]

Those stupid LCD's are originally meant for the Mozart TX cases which actually (from my understanding) have 7" bays but have a converter that makes mounting 5.25 possible in them. IIRC, that's also the same size as North American car radios.

Seeing that is a custom MM, a 7" bay (or two) wouldn't have been that much of a problem to put in the case.

QFT. I misread between the whole 5.25" drive bay/7" bay converter blah blah.
I concede :ROTF:

[SiNiSon]

@sinison

:( could you please share what coolant are you using? thanks...




...for the third time... Lols...

Feser-One UV-Blue

[MorGo7h]

Lol! My portable dvd-player with two 7" LCD screens is cheaper.

[CyberDruid]

http://img262.imageshack.us/img262/3778/kollkube032mf1.jpg
http://img262.imageshack.us/img262/1370/kollkube031eu4.jpg
http://img87.imageshack.us/img87/9555/kollkube028xb7.jpg

[DShankar]

http://img262.imageshack.us/img262/3778/kollkube032mf1.jpg
http://img262.imageshack.us/img262/1370/kollkube031eu4.jpg
http://img87.imageshack.us/img87/9555/kollkube028xb7.jpg

Nice! What's going on in those pictures/those copper tubes!? Definitely an unusual w/c setup! :clap:

[sladesurfer]

http://img262.imageshack.us/img262/3778/kollkube032mf1.jpg


Nice set up but whats cooling the rad?? I see theres no fan blowing on it :confused: I only see an exhaust fan :shrug:

[Xilikon]

Yes, a 265 CFM fan ;)

[stormshadow]

lol. wonder if i could use that to slice and dice things when cooking.

"...but that's not all... if you call now..."

[hecktic]

where did you get such an insane fan from?

[NickS]

Nice set up but whats cooling the rad?? I see theres no fan blowing on it :confused: I only see an exhaust fan :shrug:

He probably has it either blowing in or sucking out air, thus pulling or pushing air through the radiators.

[Sinny]

Not the best of cable management, but their is hardly any room in the case, hopefully new Lian Li server Case after Xmas.

http://i3.photobucket.com/albums/y71/saint151/Picture003-1.jpg
http://i3.photobucket.com/albums/y71/saint151/Picture012.jpg
http://i3.photobucket.com/albums/y71/saint151/Picture005.jpg

[Pudi]

where did you get such an insane fan from?

http://www.frozencpu.com/cat/l3/g36/c15/s73/list/p1/Fans-12_Volt_Fans-150mm_x_172mm_Fans-Page1.html

[Papu]

Not the best of cable management, but their is hardly any room in the case, hopefully new Lian Li server Case after Xmas.

http://i3.photobucket.com/albums/y71/saint151/Picture003-1.jpg
http://i3.photobucket.com/albums/y71/saint151/Picture012.jpg
http://i3.photobucket.com/albums/y71/saint151/Picture005.jpg

lookin good :up: