Water Cooled Case Gallery

[Maxxpower]

Completed!...now i must fill up the loop... and lockup the waterblock ;)



http://img163.imagevenue.com/loc910/th_72926_CAM_1287_122_910lo.JPG (http://img163.imagevenue.com/img.php?image=72926_CAM_1287_122_910lo.JPG)http://img140.imagevenue.com/loc186/th_72933_CAM_1288_122_186lo.JPG (http://img140.imagevenue.com/img.php?image=72933_CAM_1288_122_186lo.JPG)http://img42.imagevenue.com/loc798/th_72936_CAM_1289_122_798lo.JPG (http://img42.imagevenue.com/img.php?image=72936_CAM_1289_122_798lo.JPG)http://img182.imagevenue.com/loc387/th_72943_CAM_1290_122_387lo.JPG (http://img182.imagevenue.com/img.php?image=72943_CAM_1290_122_387lo.JPG)


I will use the Uv-Green dye you can see on the top of the case...;)


I hope you like it..

[victor89]

Completed!...now i must fill up the loop... and lockup the waterblock ;)


I will use the Uv-Green dye you can see on the top of the case...;)


I hope you like it..
Yes, we like it too - but I think that all will be look better when you flip the radiator - tubing will be not so long, and all setup will be much cleaner...

Tubing outside case looks horrible

[Maxxpower]

Yes, we like it too - but I think that all will be look better when you flip the radiator - tubing will be not so long, and all setup will be much cleaner...

Tubing outside case looks horrible

yeah I know..but unfortunately.. if i make those tubings shorter...i have a kinc..

[koganinja]

here is a pic of my last bench and system and temps
http://i123.photobucket.com/albums/o319/koganinja2506/benchkoganinja.jpg
http://i123.photobucket.com/albums/o319/koganinja2506/mypcspech.jpg

i was also thinking of going sli is it worth it and is it worth cooling the mosfets has i have seen mips do a full set of blocks for the 680i

[Johnsernickle]

Ive had my water cooled system up for about a month now and I finally have to post some pictures.

http://www.pitt.edu/~ptp1/computer/computers.jpg

http://www.pitt.edu/~ptp1/computer/main%20rig.jpg

http://www.pitt.edu/~ptp1/computer/pump.jpg

http://www.pitt.edu/~ptp1/computer/side%20closeup.jpg

http://www.pitt.edu/~ptp1/computer/side.jpg

http://www.pitt.edu/~ptp1/computer/side-full.jpg

http://www.pitt.edu/~ptp1/computer/WC%20Angle.jpg

http://www.pitt.edu/~ptp1/water%20overclock%202.jpg

[Garrett]

Reminds me of my system... I'll post pics soon :up:

[Maxxpower]

Totally completed and replaced on my desktop...


;) I've cut a little the back tubings from the rad..

http://img162.imagevenue.com/loc1148/th_08866_11112007190_122_1148lo.jpg (http://img162.imagevenue.com/img.php?image=08866_11112007190_122_1148lo.jpg)


Sorry for the quality....i took it with a nokia N70 :down:

[Patriote]

@ rbsmontemor Really clean and neat man, i like!

[ls206]

+ 1
I like it a lot! very tidy

[rbsmontemor]

@ rbsmontemor Really clean and neat man, i like!

+ 1
I like it a lot! very tidy

Thanks a lot :clap:

[PilatuS]

Just wanted to show an updated pic of my rig. Hope you guys like it :)

[ls206]

:D I like the ninjas protecting the hardware!
It looks so cosy in there!
nice one

[PilatuS]

Tnx :)

But actually they are figures from Counter-Strike, my favorite game.

[Patriote]

:D I like the ninjas protecting the hardware!
It looks so cosy in there!
nice one

lol boys and there little toys :p: Personally, my toys are my computers so...lol

[ls206]

haha, I didn't say I'd want to play "ninja vs terrorists" with them!

....although....

:D

[PilatuS]

lol boys and there little toys :p: Personally, my toys are my computers so...lol

As you can see in my post above they are Counter-Strike figures. My sister bought them in China when she was there. I think they look pretty good in my PC. My PC is kind of a CS:S machine :P

Some people like it, some people hate it. I like it :)

[[XC] DragonOrta]

http://www.pitt.edu/~ptp1/computer/computers.jpg

W00t w00t for the Grados! Love mine. :up:

[Bartflaster]

http://www.forumdeluxx.de/gallery/data/500/DSC06268.jpg

I think that looks stunning :D

So much so, I wanted to go with 10/8 and compression fittings (I assume thats what was used ?) for my build, but I have a problem.

I ordered some compression fittings, but the store that sold them only had one sort of black 10/8 in stock (alphacool) so I got that ... I am dissapointed in it will only go to around 120mm bend ... much more and it kinks.

The Tygon Mflox used goes much tighter, looking at the CPU to Northbridge in that pic, but I can only find one supplier in the UK ... and that is 11/8, is that what you used ?

Did you have a problem getting the compression ring over it as the tubes OD is 1mm to large ?

Secondly, anyone know of any other UK suppliers for this tube ?
(I don't want to pay nearly a fiver postage on £6 worth of tube which is the case on the supplier I found :rolleyes: ).

[funkflix]

http://www.gravedigga.de/gravedigga/PC1/neu/komplett.jpg

http://www.gravedigga.de/gravedigga/PC1/neu/zoom.jpg

http://www.gravedigga.de/gravedigga/PC1/neu/oben.jpg

http://www.gravedigga.de/gravedigga/PC1/neu/untenrechts.jpg

[CyberDruid]

Nice Work!

I like the flat black RAM cooler...a nice change from all the shiny ones I keep seeing.

[Raduke]

http://www.gravedigga.de/gravedigga/PC1/neu/komplett.jpg

http://www.gravedigga.de/gravedigga/PC1/neu/zoom.jpg

http://www.gravedigga.de/gravedigga/PC1/neu/oben.jpg

http://www.gravedigga.de/gravedigga/PC1/neu/untenrechts.jpg

OMFG, did you just abandon external rads? :D

[funkflix]

Yes and i switched to AMD.

[lolhalol]

Yes and i switched to AMD.

bro wat cahse is that.. looks awesome

[disruptfam]

I think that looks stunning :D

So much so, I wanted to go with 10/8 and compression fittings (I assume thats what was used ?) for my build, but I have a problem.

I ordered some compression fittings, but the store that sold them only had one sort of black 10/8 in stock (alphacool) so I got that ... I am dissapointed in it will only go to around 120mm bend ... much more and it kinks.

The Tygon Mflox used goes much tighter, looking at the CPU to Northbridge in that pic, but I can only find one supplier in the UK ... and that is 11/8, is that what you used ?

Did you have a problem getting the compression ring over it as the tubes OD is 1mm to large ?

Secondly, anyone know of any other UK suppliers for this tube ?
(I don't want to pay nearly a fiver postage on £6 worth of tube which is the case on the supplier I found :rolleyes: ).

Awesome rig man even better camera/picture...

what camera is that...

I'm getting a cannon s3 IS i hope i can get pic's like that...:up:

[Bartflaster]

disruptfam, I quoted the pic, its not mine, its MFloX's stunning looking rig and pic from around page 112 of this thread :)

[disruptfam]

lol cheers mate

[XmathX]

In the PC of Bartflaster where i can buy those 3/8 barb? Im living in canada, at ncix i see those : http://www.ncix.com/products/index.php?sku=25811&vpn=NZL-V10KG1&manufacture=Koolance

[Tile]

I installed a watercooling loop . The waterblock is 100% built using hand tools and readily available parts. The pump is a Laing DDC1T and the radiator is an Alphacool 1x120 mm.

[joecop120]

^^^what cpu are you cooling with that??

[iandh]

Just finished setting up my loop in my CM690 after a small bit of cutting. Cpu block, gpu block and unisinks, and barbs are home made by me, pump is an AQX50Z and rad is a PA160.

http://img232.imageshack.us/img232/8741/image00001go3.jpg (http://imageshack.us)

http://img144.imageshack.us/img144/8518/image00002mk4.jpg (http://imageshack.us)

http://img118.imageshack.us/img118/591/image00003np4.jpg (http://imageshack.us)

[AAjax]

Nice work, what model biostar MB is that?

[pattherat111]

Hey
thats a monster case Funkflix what is it

[iadstudio]

Mine is finally done. Maybe one day I'll be able to affort a VGA that's worth watercooling, but til then this should do. I wanted to take the "P 180" decal off the window but my wife said it make the computer sound like a "fast car".

[Bartflaster]

http://www.gravedigga.de/gravedigga/PC1/neu/komplett.jpg

I too, would like to know what case that is please :)

Where i can buy those 3/8 barb? Im living in canada

XmathX, I don't know what you have over in Canada ... but search for 10/8 compression fittings, should bring them up.

[ls206]

Looking good Iandh, how're the block performing??
What tubing are you using? I like it!

[funkflix]

I too, would like to know what case that is please :)


It is a Chieftec Mesh Bigtower. :)

http://www.abload.de/img/imgp2766ano.jpg

http://www.abload.de/img/clipboard01kxg.jpg

[lolhalol]

thats a really nice case for hdd cooling... :)

[Bartflaster]

Ah .. been looking at those, very hard to find now, do chieftek still exist ?
Nice build, is it black as standard inside, or did you paint it ?

[Tile]

The inside of the Chieftec cases is not painted black as standard. He painted the inside of the case black. The paintjob was done professionally.

[Ludus]

this is mine's case

http://img138.imageshack.us/img138/4300/cimg2267tg2.th.jpg (http://img138.imageshack.us/my.php?image=cimg2267tg2.jpg) http://img340.imageshack.us/img340/4213/cimg2269xf7.th.jpg (http://img340.imageshack.us/my.php?image=cimg2269xf7.jpg) http://img152.imageshack.us/img152/1908/cimg2274ij7.th.jpg (http://img152.imageshack.us/my.php?image=cimg2274ij7.jpg)

http://img340.imageshack.us/img340/7122/cimg2276pu6.th.jpg (http://img340.imageshack.us/my.php?image=cimg2276pu6.jpg) http://img340.imageshack.us/img340/9241/cimg2278hf1.th.jpg (http://img340.imageshack.us/my.php?image=cimg2278hf1.jpg) http://img65.imageshack.us/img65/6608/cimg2282lx6.th.jpg (http://img65.imageshack.us/my.php?image=cimg2282lx6.jpg)

http://img147.imageshack.us/img147/5250/cimg2285es4.th.jpg (http://img147.imageshack.us/my.php?image=cimg2285es4.jpg)

[Evil-Vincent]

:D


http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01210001.jpg
http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01230002.jpg
http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01240003.jpg
http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01250004.jpg
http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01270005.jpg
http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01280006.jpg
http://i79.photobucket.com/albums/j138/Evil-Vincent/DSC_01290007.jpg

[Colossous]

Thats a great looking build Vincent, liking the black tubing ! :up:

[XmathX]

So here my little Termaltake Armor Junior :

http://img117.imageshack.us/img117/5999/p1070301ah2.th.jpg (http://img117.imageshack.us/my.php?image=p1070301ah2.jpg)

http://img406.imageshack.us/img406/1530/p1080323mj7.th.jpg (http://img406.imageshack.us/my.php?image=p1080323mj7.jpg)

http://img130.imageshack.us/img130/3879/pb120331bu7.th.jpg (http://img130.imageshack.us/my.php?image=pb120331bu7.jpg)

[pattherat111]

thanks for that FunkFlix:up:

[GIZIU]

Hi everyone, little update in my TJ07:

http://img144.imageshack.us/img144/136/img0026yu3.th.jpg (http://img144.imageshack.us/my.php?image=img0026yu3.jpg)http://img144.imageshack.us/img144/5295/img0029wn5.th.jpg (http://img144.imageshack.us/my.php?image=img0029wn5.jpg)http://img144.imageshack.us/img144/4638/img0031az5.th.jpg (http://img144.imageshack.us/my.php?image=img0031az5.jpg)http://img144.imageshack.us/img144/7362/img0032wo2.th.jpg (http://img144.imageshack.us/my.php?image=img0032wo2.jpg)http://img144.imageshack.us/img144/9913/img0034ia8.th.jpg (http://img144.imageshack.us/my.php?image=img0034ia8.jpg)
http://img144.imageshack.us/img144/5233/img0036jo4.th.jpg (http://img144.imageshack.us/my.php?image=img0036jo4.jpg)http://img144.imageshack.us/img144/3519/img0037xu0.th.jpg (http://img144.imageshack.us/my.php?image=img0037xu0.jpg)http://img144.imageshack.us/img144/4442/img0039xx8.th.jpg (http://img144.imageshack.us/my.php?image=img0039xx8.jpg)http://img151.imageshack.us/img151/2136/img0040op4.th.jpg (http://img151.imageshack.us/my.php?image=img0040op4.jpg)http://img151.imageshack.us/img151/6317/img0041le0.th.jpg (http://img151.imageshack.us/my.php?image=img0041le0.jpg)
http://img151.imageshack.us/img151/4638/img0042wb6.th.jpg (http://img151.imageshack.us/my.php?image=img0042wb6.jpg)http://img151.imageshack.us/img151/172/img0043ek6.th.jpg (http://img151.imageshack.us/my.php?image=img0043ek6.jpg)http://img151.imageshack.us/img151/7332/img0044yw4.th.jpg (http://img151.imageshack.us/my.php?image=img0044yw4.jpg)http://img151.imageshack.us/img151/2821/img0047cb7.th.jpg (http://img151.imageshack.us/my.php?image=img0047cb7.jpg)http://img151.imageshack.us/img151/7189/img0048ft9.th.jpg (http://img151.imageshack.us/my.php?image=img0048ft9.jpg)
http://img151.imageshack.us/img151/3772/img0050fn8.th.jpg (http://img151.imageshack.us/my.php?image=img0050fn8.jpg)http://img152.imageshack.us/img152/4821/img0052yv1.th.jpg (http://img152.imageshack.us/my.php?image=img0052yv1.jpg)http://img152.imageshack.us/img152/9604/img0053hk9.th.jpg (http://img152.imageshack.us/my.php?image=img0053hk9.jpg)http://img235.imageshack.us/img235/2549/img0054ka8.th.jpg (http://img235.imageshack.us/my.php?image=img0054ka8.jpg)http://img235.imageshack.us/img235/7485/img0057ss0.th.jpg (http://img235.imageshack.us/my.php?image=img0057ss0.jpg)
http://img235.imageshack.us/img235/5304/img0059mj2.th.jpg (http://img235.imageshack.us/my.php?image=img0059mj2.jpg)http://img235.imageshack.us/img235/385/img0060si4.th.jpg (http://img235.imageshack.us/my.php?image=img0060si4.jpg)http://img235.imageshack.us/img235/5769/img0061tv9.th.jpg (http://img235.imageshack.us/my.php?image=img0061tv9.jpg)http://img235.imageshack.us/img235/1811/img0062kl5.th.jpg (http://img235.imageshack.us/my.php?image=img0062kl5.jpg)http://img235.imageshack.us/img235/262/img0063co0.th.jpg (http://img235.imageshack.us/my.php?image=img0063co0.jpg)
http://img235.imageshack.us/img235/5377/img0066cn1.th.jpg (http://img235.imageshack.us/my.php?image=img0066cn1.jpg)http://img235.imageshack.us/img235/9161/img0068bz4.th.jpg (http://img235.imageshack.us/my.php?image=img0068bz4.jpg)http://img235.imageshack.us/img235/7858/img0069bo1.th.jpg (http://img235.imageshack.us/my.php?image=img0069bo1.jpg)http://img235.imageshack.us/img235/8599/img0070rq4.th.jpg (http://img235.imageshack.us/my.php?image=img0070rq4.jpg)http://img144.imageshack.us/img144/2493/img0075vb2.th.jpg (http://img144.imageshack.us/my.php?image=img0075vb2.jpg)

[Evil-Vincent]

Thanks GIZIU, you have made me jealous :(

[Origin_Unknown]

^^^what cpu are you cooling with that??

its some socket 754 amd

[The_Beast]

GIZIU nice system, not to fond of the black tubing but to each is own

[icrunk]

wow.. the TJ07's are becoming really popular now :eek:

[SparkyJJO]

wow.. the TJ07's are becoming really popular now :eek:

Yeah they are... which is one reason why I plan to not ever have one, to be different :cool:

[Xilikon]

Yeah they are... which is one reason why I plan to not ever have one, to be different :cool:

Agreed, I'm modding my WaveMaster to be the only guy in the world with a internal PA120.3 :D

[peebee]

TJ07 invaders are also in germany. Awful! :shakes:

[CyberDruid]

wow.. the TJ07's are becoming really popular now :eek:

It's a great case for LC.

I have a client build going now that jams a 480 GTX in the lower compartment.

And no window or lighting:shrug:

[icrunk]

It's a great case for LC.

I have a client build going now that jams a 480 GTX in the lower compartment.

And no window or lighting:shrug:

Yeh, it is a great case.. i own one of them myself, very spacious case.. i've got a 360 rad in the lower compartment and a 240 on the top where those 2 fans are.. could even fit another 240 in the lower compartment too..

Great case, but replacement parts are like impossible to get! I emailed Silverstone to maybe get a replacement top grille / mesh thing and a window side panel and they simply wouldn't sell me one. They said all the TJ07's are made to size, which i find hard to believe..

Anyone know where to get a new top mesh and side panel? :D

[mcaff]

http://img144.imageshack.us/img144/2493/img0075vb2.th.jpg
money man :hammer:

[ceemic]

mcaff, ära spämmi siin, osta mu pump ära :D

[MorGo7h]

All those tj-07 :p
But they are very nice :D

[Nate P.]

Some more of my pics:

http://i204.photobucket.com/albums/bb231/natephillips/DSC03289.jpg

http://i204.photobucket.com/albums/bb231/natephillips/DSC03290.jpg

http://i204.photobucket.com/albums/bb231/natephillips/DSC03299.jpg

Enjoy!

[disruptfam]

nice test setup!! :) go for a red dye for the final build i rekon would be sick!

[CyberDruid]

Gotta love a tech station. I have three...:p:

Man it's been like a week since I built an LC rig...time to get busy

[Nate P.]

Man it's been like a week since I built an LC rig...time to get busy
:rofl: :rofl: :rofl: One week, eh...

[stormshadow]

passive radiator?

[Nate P.]

passive radiator?
In the pics with no fluid, yes, but I added fans when I actually filled the system with coolant.:up:

[TheSamurai]

i like the hardcore look of it... test setup? i'd use that for my everyday rig! :up:

[Nate P.]

i like the hardcore look of it... test setup? i'd use that for my everyday rig! :up:
Yep, it's homemade goodness... I'm actually using it as my everyday rig right now because I trashed my Lian Li, so I'm of the lookout for a new case...

[CyberDruid]

I have a love hate relation to cases. I love on them but when it's time to reach in there and change a stick of RAM I hate them :p:

Hard to beat a techstation for tinkering. :scope:

[MorGo7h]

Nice bench table :p

[funkflix]

Ok, last pics now of my system. :p:

http://www.abload.de/img/imgp2774rvl.jpg

http://www.abload.de/img/imgp2776c70.jpg

http://www.abload.de/img/imgp2778dj7.jpg

http://www.abload.de/img/imgp2780hkr.jpg

[OCFX]

omg funkflix what green fan is that? is another colors avaliable?

[Bartflaster]

Very nice Funkflix, I like ... apart from the green fan, not sure about that :)

[funkflix]

omg funkflix what green fan is that? is another colors avaliable?

No, only in this color-combination. The manufacture is Nanoxia - http://www.nanoxia.com/

Very nice Funkflix, I like ... apart from the green fan, not sure about that :)

Thx. Soon i will complety change all 120x120mm fans into some black Yate Loons. Maybe that looks better, but must try it. :)

[CyberDruid]

Their site sez Moddersmart.com is a reseller but I see nothing on their store.

I really like the look of that fan! Where can we get them online?

[Garrett]

nice funkflix, a black ocz xtc cooler?
I have the normal (chrome) one... did you spraypaint it yourself? :slobber:
Neat case and setup :up:

[Slitch]

Nice setup funflix.
But seriously, get rid of that KTC ( zern) cpu cooler, huge flow killer!
Or just flex out the middle part wich restricts it. :p:

[funkflix]

Their site sez Moddersmart.com is a reseller but I see nothing on their store.

I really like the look of that fan! Where can we get them online?

Hmm, don't know where to get them online outside of germany at the moment, maybe you should wait a few weeks more. The fans are new on the market. :)

nice funkflix, a black ocz xtc cooler?
I have the normal (chrome) one... did you spraypaint it yourself? :slobber:
Neat case and setup :up:

Thx! Yes i spraypainted it by myself.

Nice setup funflix.
But seriously, get rid of that KTC ( zern) cpu cooler, huge flow killer!
Or just flex out the middle part wich restricts it. :p:

There is nothing else on the market for AM2 at the moment, that looks good enough for me. The only cooler i liked was the Zern... Temps are good and flow it's ok too. But soon i will buy me the new Enzotech, the cooler wasn't aviable at the moment i needed a good looking cooler for my setup. :)

[CyberDruid]

Does the D-Tek not fit AM2?

[Garrett]

The FuZion fits, IIRC there is another mounting plate included when you buy it... can anyone confirm this?

[Zeus]

The FuZion fits, IIRC there is another mounting plate included when you buy it... can anyone confirm this?

I can, you're right. ;)

[Digital Nirvana]

went and changed the layout of my loop again, I like it. I also ghetto mounted my pump, since my pad lost its stickyness :D

http://digital.devonswing.com/Pictures/Case/Computer.jpg

(pardon the bad pictures, my D100 broke, and I am using the parents camera till I get a new one)

[Nate P.]

How's your HDD temps?!

[Digital Nirvana]

How's your HDD temps?!

its telling me 39/42C and I am doing a defrag on each right now.

[ownage]

Update:

Swiftech Mcres
Swiftech mcp655
HWlaps Black Ice GT Stealth
Swiftech Apogee GT
D-tek Fuzion GFX
Masterkleer 1/2

Sorry for the bad quality, my camera seems to be dying:

Overall picture:
http://img.techpowerup.org/071118/IMG_2484.jpg

http://img.techpowerup.org/071118/IMG_2482.jpg

http://img.techpowerup.org/071118/IMG_2492.jpg

2900PRO, cooled by D-tek Fuzion GFX
http://img.techpowerup.org/071118/IMG_2467.jpg

http://img.techpowerup.org/071118/IMG_2485.jpg

e6600 @ 3.8ghz 24/7, cooled by Apogee GT
http://img.techpowerup.org/071118/IMG_2491.jpg

My 2900pro @ 850/999 only warms up to 45c max after 10minutes of ATITOOL artifact testing. :D

[Digital Nirvana]

is that a kink coming off of your card into the res?

[CyberDruid]

Ditto that. You might want to try a few cable ties around the tubing there to keep it from collapsing.

[disruptfam]

funkflix thats a sik rig man!!! i like!

[Nate P.]

Nice rig, I really like the blue coolant you used.

[CyberDruid]

http://img45.imageshack.us/img45/8236/1016044kj0.jpg
http://img529.imageshack.us/img529/7732/1016040rg8.jpg
http://img84.imageshack.us/img84/5900/1016039fk9.jpg
http://img87.imageshack.us/img87/5942/1016035ql0.jpg
http://img225.imageshack.us/img225/6981/1016034ca1.jpg
http://img45.imageshack.us/img45/4030/1016030gk6.jpg
Princess and POISON

[rbsmontemor]

OH MY GOSH! :shocked:

Beatiful! :clap:

[emaniac]

yeahh, descrete lighting, just the way i like.
my uv ccfls are dying. must to find replacement

[Bartflaster]

I noticed a lot of people mount the res low, doesn't it make life easier for bleeding etc to be the highest component in the loop ?

[ownage]

is that a kink coming off of your card into the res?

Yes it is. I have no idea how, but it really sucks. Its not a big kink, but either way i dont like it. I bought this tubing as Masterkleer, but i think they sent me some other brand. This tubing hasn't any name or specifications printed on it.

[CyberDruid]

Yes it is. I have no idea how, but it really sucks. Its not a big kink, but either way i dont like it. I bought this tubing as Masterkleer, but i think they sent me some other brand. This tubing hasn't any name or specifications printed on it.

It might not look so sexy but a half dozen cable ties gently snugged up on that kink will help the tube keep it's shape.

[Xilikon]

I noticed a lot of people mount the res low, doesn't it make life easier for bleeding etc to be the highest component in the loop ?

In a closed loop, it doesn't matter too much. Mine is also set a bit low but when you tip the case on the side, it will be the highest point ;)

Great build, CyberDruid :)

[mit78]

http://img522.imageshack.us/img522/1374/dscf3977yz0.jpg

[dnb#]

http://img522.imageshack.us/img522/1374/dscf3977yz0.jpg

Hi? post some more pics please, and you don't have to put links down, you actually can drop them on the page himself ;)

I also have an akasa eclipse, wonderfull case if you ask me! so much space, and the interior looks soooo great!

SO GO POST SOME MORE :)

[Digital Nirvana]

Hi? post some more pics please, and you don't have to put links down, you actually can drop them on the page himself ;)

I also have an akasa eclipse, wonderfull case if you ask me! so much space, and the interior looks soooo great!

SO GO POST SOME MORE :)

please dear god do not make him post that image on this page, at least resize.

[unstoppable]

Here is my new Silverstone TJ-07b

http://img137.imageshack.us/img137/734/31865576io0.jpg
http://img117.imageshack.us/img117/9059/38042656eg0.jpg
http://img249.imageshack.us/img249/856/67198056iy8.jpg

[MrMick]

My coolermaster cavalier 3 with yellow & black paint + side & top window .

Spec intel e6600 @ 3.4 1.29v bios vdroop 1.248 :shakes: just stress testing for now - gigabyte p35 ds4 - ati x1950 pro :p: soon to be 3870 or 8800 gt with full coverage block - 2gb geil pc6400 @ 852 4-4-4-12 - tagan u33 700w psu - dvd writer sata - maxtor 320gb sata -

http://i219.photobucket.com/albums/cc56/mlingard/rig.jpg

http://i219.photobucket.com/albums/cc56/mlingard/rig2.jpg

http://i219.photobucket.com/albums/cc56/mlingard/rig3.jpg

[disruptfam]

unstoppable awesome build man very clean!! awesome i love it

[mit78]

pictures for you,its akasa mirage,not eclipse.
http://img212.imageshack.us/img212/6548/dscf3972mr6.jpg
http://img217.imageshack.us/img217/107/dscf3970ha1.jpg

[ceemic]

unstoppable, why FuZion is 90deg "wrong"?

[Zeus]

unstoppable, why FuZion is 90deg "wrong"?

That's what i was thinking, the outlet has to be on top.

[unstoppable]

That's what i was thinking, the outlet has to be on top.

Hmm, i thought it didn't matter:( :rolleyes:

[Xilikon]

Hmm, i thought it didn't matter:( :rolleyes:

It matters to avoid air bubbles locked in a corner but if you bleed it correctly (turning the case in all directions, even upside down, till air is all out), it doesn't matter that much ;)

[carholmes]

I just finished my first loop yesterday. Now I can see why some of you guys are crazy for water cooling. My rig is now quieter than ever before, and with better temps.
Well I'm running a MCP655, a MCW60, a D-Tek Fuzion, a MCR320 with medium yates, 7/16in Masterkleer, and a 5/8in OD Tee.

http://img440.imageshack.us/img440/2514/hpim1062tx1.jpg

http://img208.imageshack.us/img208/5199/hpim1066vt1.jpg

http://img208.imageshack.us/img208/2351/hpim1067gi9.jpg
(Sorry if the pics are sort of crappy)

[ANP !!!]

Nice rigs :up: :up: :up:

[MorGo7h]

I just finished my first loop yesterday. Now I can see why some of you guys are crazy for water cooling. My rig is now quieter than ever before, and with better temps.
Well I'm running a MCP655, a MCW60, a D-Tek Fuzion, a MCR320 with medium yates, 7/16in Masterkleer, and a 5/8in OD Tee.


Congrats with your first wc'ed rig :clap:

[ginnz]

I noticed a lot of people mount the res low, doesn't it make life easier for bleeding etc to be the highest component in the loop ?

i have my res mounted on the very top of my case....:up:

[revlob]

http://farm3.static.flickr.com/2375/1907212642_d0447ffd5e.jpg?v=0

My TJ09 :)

[CyberDruid]

Wow and endless stream of LC goodness. Nice work on your first build there Carholmes.

[Spuggi]

http://sfsolutions.de/sf-projects/bilder/spuggi-nethands/rev10case.jpg

http://sfsolutions.de/sf-projects/bilder/spuggi-nethands/rev10schlauch.jpg

[AAjax]

I like the top enclosure!

[Red Evil]

What case is it?

[Spuggi]

LianLi PC7 SE II

[CyberDruid]

I love that mod. That's one of my favorite Lian Li cases.

[jay_lee300]

im seeing more and more swiftech fuzion blocks being mounted wrong way, does it make much difference?, i have mine on a e6600 clocked it down from 3.6ghz to 3ghz was on for 6hrs and idle temp didnt go over 20c

[~aoe~]

That 1st pic looks unreal with the PC in sharp focus and the background not. I guess it has been edited, but it does look cool :up:

edit: 100 up

[Spuggi]

im seeing more and more swiftech fuzion blocks being mounted wrong way, does it make much difference?, i have mine on a e6600 clocked it down from 3.6ghz to 3ghz was on for 6hrs and idle temp didnt go over 20c

lol.... you live in the arctic? 20°C is normal room temperature xD

Whats wrong mounted? It's the new revision, so no clips, they "downgraded" their equipment, delivered with the heatsink...

@aoe
right, its edited with photoshop, so u dont see my messed up room ^^

[jay_lee300]

i live in the uk, i meant the inlet and outlet look wrong way on most pictures

[Spuggi]

mh its working well, i didn't care if there's a difference between in and outlet, because both look the same, i took a look inside and saw no difference.

[deepsilver]

Cuplex AM2:

http://i223.photobucket.com/albums/dd287/deepsilber/Cuplex.jpg

AquaTube with AquaBay:

http://i223.photobucket.com/albums/dd287/deepsilber/AquaTube_1.jpg

http://i223.photobucket.com/albums/dd287/deepsilber/AquaTube_2.jpg

Hope you like it. :up:

[Roch]

http://sfsolutions.de/sf-projects/bilder/spuggi-nethands/rev10case.jpg



Did you make that Radbox? If not could you link to where to get one, it's very nice :) .

[sargatanas]

should be a watercool radiator

http://www.caseking.de/shop/catalog/default.php?cPath=27_282_675

[Bartflaster]

http://i223.photobucket.com/albums/dd287/deepsilber/AquaTube_1.jpg


Show this to the guy painting the "Bioshock" TJ07, that would look perfect painted up in that :)

[Spuggi]

@Sargatanas
Is richtig ;)

We got some really nice watercooling stuff here in germany, so its normal that you see special equipment on some pictures :)

[sargatanas]

btw:
has any1 an idea where I might get a sb/crosslinx cooler for my Asus Maximus Xtreme?

[nullface]

http://8d.dk/nano/files/wc01.jpg
http://8d.dk/nano/files/wc02.jpg
http://8d.dk/nano/files/wc03.jpg
http://8d.dk/nano/files/wc04.jpg

EDIT: Wow just saw, that on the first 2 pic's it looks like the fans are turned off, but the are doing 600RPM.

[YugenM]

[IG]http://sfsolutions.de/sf-projects/bilder/spuggi-nethands/rev10case.jpg[/IMG]

[IM]http://sfsolutions.de/sf-projects/bilder/spuggi-nethands/rev10schlauch.jpg[/IMG]

How quiet do you find the Eheim in that external enclosure?

[rsmaverick]

Very nice spuggi. Damn.

[Nate P.]

Nice one, Nullface.

[Spuggi]

How quiet do you find the Eheim in that external enclosure?

There's no EHEIM in it, i got a Laing Pro. It's only a radiator on the roof, not the "all-in-one" solution from Watercool :)

@rsmaverick
Thanks :)

[ls206]

EDIT: Wow just saw, that on the first 2 pic's it looks like the fans are turned off, but the are doing 600RPM.
now that's some camera shutter speed you got there, there's not even a blur!

[pcfreak]

http://www.gravedigga.de/gravedigga/PC1/neu/zoom.jpg


funkflix great job man :up:
what do u use to cool the 2900's v-regulator?

[CyberDruid]

Not a fan of Aquacomputer stuff. It's made of fail. Looks great though.

Just my opinion.

[Digital Nirvana]

funkflix great job man :up:
what do u use to cool the 2900's v-regulator?

I am seeing heatsinks on there, I think you are seeing the southbridge block.

[Nate P.]

I am seeing heatsinks on there, I think you are seeing the southbridge block.
It's an AM2 board, so it's acually the NB+SB, I believe.

[pcfreak]

I am seeing heatsinks on there, I think you are seeing the southbridge block.

no I am not talking about the block. If you look carefully, you will see smthing like a heatsink near the pcix power cable...

[super dank]

I had posted earlier (less intense) work done to this case at another forum as "Mister Crowley", but this was the last setup of this green mass I did. I eventually sold this machine to a friend of mine at a decent profit.

Unfortunately as can be seen in the last picture, the peltier was taken off the 8800gtx video card after building was complete, due to unsatisfactory temps, although the voltmod allowed me to overclock it over 750mhz. I used to regularly pelt-cool my video cards when video cards weren't quite so radiant.

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8403.jpg

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8410.jpg

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8454.jpg

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8411.jpg

This is the machine I am using right now. The lid and side panel would not fit on it due to the pci-e power connectors, so who needs em anyway... Now that I use a desk vs a coffee table, I have alot more work room that I decided to allocate to my machine ;) This was a work in progress that was actually totally air-cooled for a long time, even though I had all of the parts. I got a great deal on the radiators when they went on sale, but I should have suspected they would not include barbs.


http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8977.jpg

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8978.jpg

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8981.jpg

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8988.jpg

Out of sight; out of mind :) ;)

Two-inch machine screws with pieces of tube make nice little legs for the radiators.

http://i25.photobucket.com/albums/c87/gimmeabone/IMG_8983.jpg

[pattherat111]

i take it you like acrylic cases :D
very nice though
have you thought about building you own case out of acrylic

[zuess]

Been lurking around here and getting some good idea's so i thought i would take the plunge.
Congrats to the many excellent builds everyone. 67732

67733

67734

67735

Opinions and Advice for a noob is welcome

[RickCain]

Here is my current setup. Just waiting for 3870 blocks so I can get my second loop going.


http://i7.photobucket.com/albums/y255/rickcain/Computer%20Stuff/maximus.jpg

http://i7.photobucket.com/albums/y255/rickcain/Computer%20Stuff/100_1332.jpg

http://i7.photobucket.com/albums/y255/rickcain/Computer%20Stuff/Q6600_DoubleImpactIdle.jpg

http://i7.photobucket.com/albums/y255/rickcain/Computer%20Stuff/100_1340.jpg

[AAjax]

Nice and clean :up:

[CyberDruid]

I like the hardlines. I might have to use that ideer.

Loving those phat red cards...

[lennox]

http://img250.imageshack.us/img250/817/comp1og8.jpg
http://img216.imageshack.us/img216/1661/comp2iq4.jpg
http://img216.imageshack.us/img216/8527/comp3pe1.jpg
http://img250.imageshack.us/img250/3090/comp4qj6.jpg

e6600 @ 3.6, 4gb ocz 1066, 8800gtx, asus p5k deluxe, 150gb raptor
bix 360, bix 120, apogee gtx copper, ek fc 8800gtx, d5, ek res, tygon r3400

[Bartflaster]

Some nice builds :)
Great first post Lennox, sweet build :)

[AAjax]

What kind of after market top is on the pump?

[Origin_Unknown]

woah, that looks awesome lennox

[Red Evil]

Lennox, is that a Lian case? What model?

[dnb#]

omg, that must be the most beautiful neat looking case i've seen so far I think :) I have black tygon too and I love those black neat looks I must say.

vey well done m8

[joecop120]

@ lennox -

Almost looks like its insulated for cold weather ;)

[CyberDruid]

Just Sold Princess

Have a last look at this beast (4ghz Q6600 12.54 Super Pi, 20,158 3DMark06)

and wave bye bye...

I have to ship this monster to Canada:eek:

http://img213.imageshack.us/img213/125/1015974od5.jpg

http://img152.imageshack.us/img152/3376/1015976iy6.jpg

http://img171.imageshack.us/img171/9004/princess001sj6.jpg

http://img211.imageshack.us/img211/3755/princess027qu2.jpg

http://img66.imageshack.us/img66/3132/princess029zs8.jpg

[Sta!nless]

First post and I feel out of place. I came here to learn more.
http://i228.photobucket.com/albums/ee41/dwellrod/IMG00037.jpg
http://i228.photobucket.com/albums/ee41/dwellrod/IMG00035.jpg
http://i228.photobucket.com/albums/ee41/dwellrod/IMG00033.jpg
http://i228.photobucket.com/albums/ee41/dwellrod/IMG00032.jpg
http://i228.photobucket.com/albums/ee41/dwellrod/IMG00031.jpg

[Steffen]

http://www.abload.de/img/img_393143o.jpg

http://www.abload.de/img/img_3932q45.jpg

http://www.abload.de/img/img_3934nji.jpg

http://www.abload.de/img/img_3935ysx.jpg

http://www.abload.de/img/img_3936dr7.jpg

http://www.abload.de/img/img_3937gxp.jpg

[alejo]

Steffen, that looks great! Did you make the lower portion?

[dnb#]

OMG THAT LOOKS NICE?!?!

how did you create those wonderful pics man, really nice! :)

[Red Evil]

Sweet very sweet.

[Nate P.]

Looks nice and clean.

[Mad_Man]

OMG THAT LOOKS NICE?!?!

how did you create those wonderful pics man, really nice! :)
in the first pic the background is blurred out in photoshop or other program.
the 2nd pic would look much better with the same post processing.

But its really wonderful

[Steffen]

Steffen, that looks great! Did you make the lower portion?
No this one was made by LeChuck at Forumdeluxx.de.
And the picture no.1 was edited with the gausian blur filter of photoshop :)

[Bartflaster]

A couple of pics of my just completed, very first, watercooled build:

http://homepage.ntlworld.com/gypsypirates/images/wcp13.jpg

http://homepage.ntlworld.com/gypsypirates/images/wcp14.jpg

Just a pity the PSU now seems loud as the rest is so silent :rolleyes:

[Krav]

looks great!

[SparkyJJO]

Just Sold Princess

Have a last look at this beast (4ghz Q6600 12.54 Super Pi, 20,158 3DMark06)

and wave bye bye...

I have to ship this monster to Canada:eek:

http://img213.imageshack.us/img213/125/1015974od5.jpg

http://img152.imageshack.us/img152/3376/1015976iy6.jpg

http://img171.imageshack.us/img171/9004/princess001sj6.jpg

http://img211.imageshack.us/img211/3755/princess027qu2.jpg

http://img66.imageshack.us/img66/3132/princess029zs8.jpg

Dude how do you ship something like that?

[disruptfam]

http://www.abload.de/img/img_393143o.jpg

http://www.abload.de/img/img_3932q45.jpg

http://www.abload.de/img/img_3934nji.jpg

http://www.abload.de/img/img_3935ysx.jpg

http://www.abload.de/img/img_3936dr7.jpg

http://www.abload.de/img/img_3937gxp.jpg

that looks amazing!!!!

Awesome rig stefan!!! :up:

I love the 1st shot you did with photoshop... i would like to the same with my pics what photoshop did you use i will get the same :)

cheers

[disruptfam]

A couple of pics of my just completed, very first, watercooled build:

http://homepage.ntlworld.com/gypsypirates/images/wcp13.jpg

http://homepage.ntlworld.com/gypsypirates/images/wcp14.jpg

Just a pity the PSU now seems loud as the rest is so silent :rolleyes:

that's fantastic !!! these builds are getting better and better i wish my rig looked that good for a 1st try....

[CyberDruid]

Dude how do you ship something like that?

http://img407.imageshack.us/img407/3407/princesscrate004uf7.jpg
Like this :)

Hey Steffen that is super awesome. OMG I wish I could fabricate something that perfect. It looks better than factory.

[nattoNrice]

that looks amazing!!!!

Awesome rig stefan!!! :up:

I love the 1st shot you did with photoshop... i would like to the same with my pics what photoshop did you use i will get the same :)

cheers

Its like real life Crysis! ... omg im a nerd :S

[SparkyJJO]

ohhh ok that makes more sense.... you ship it filled??? don't ship UPS....

[rbsmontemor]

Little update:

New PSU, TT 1000W:

http://img57.imageshack.us/img57/4939/dsc08699adrenahs1.jpg

http://img407.imageshack.us/img407/4436/dsc08693adrenall4.jpg

The cable is too shot, so I had to make an extension to fit the cabe inside:

http://img407.imageshack.us/img407/6592/dsc08702adrenawx0.jpg

http://img139.imageshack.us/img139/609/dsc08703adrenakd6.jpg


Iany told me to put the fans pushing air to the Rad (pulling before), so that's what I did :)

http://img139.imageshack.us/img139/7567/dsc08694adrenajm3.jpg

http://img57.imageshack.us/img57/2064/dsc08697adrenals3.jpg

http://img407.imageshack.us/img407/4660/dsc08698adrenala9.jpg

Older pics (http://www.xtremesystems.org/forums/showpost.php?p=2547552&postcount=5676)

Bye
:wave:

[Burn]

Why not :D Loving my new 3/8" tubing.

http://www.rigshowcase.com/img/8K0XHG/12626.jpg
http://www.rigshowcase.com/img/8K0XHG/12625.jpg
http://www.rigshowcase.com/img/8K0XHG/12624.jpg
http://www.rigshowcase.com/img/8K0XHG/12623.jpg

[deepsilver]

My AquaComputer Cuplex AM2:

http://i223.photobucket.com/albums/dd287/deepsilber/Cuplex_1.jpg

http://i223.photobucket.com/albums/dd287/deepsilber/Cuplex_2.jpg

[Tile]

What kind of threading is beind used by Aquacomputer waterblocks ?

[dnb#]

@ rbsmontemor,

You know you're little fan on the mosfets heatpipe cooler is turned the wrong way? It has to blow the air to the rear fan so can can suck the hot air away from your mobo.... ;)

in this pic: http://img407.imageshack.us/img407/4436/dsc08693adrenall4.jpg

just helping m8

[stormshadow]

@ rbsmontemor,

You know you're little fan on the mosfets heatpipe cooler is turned the wrong way? It has to blow the air to the rear fan so can can suck the hot air away from your mobo.... ;)

in this pic: http://img407.imageshack.us/img407/4436/dsc08693adrenall4.jpg

just helping m8

hmm... looks right to me. If that's a blower fan like I think it is, then the fan portion sucks in and in this case, blows air into the mosfets.

so the fan is pointing the correct way when looking at airflow in the case.

Otherwise, it would be fighting against the more powerful 120mm fan

[dnb#]

hmm... looks right to me. If that's a blower fan like I think it is, then the fan portion sucks in and in this case, blows air into the mosfets.

so the fan is pointing the correct way when looking at airflow in the case.

Otherwise, it would be fighting against the more powerful 120mm fan

those asus mosfets fans inlude a sticker where they tell it has to be pointed towards the 120mm, I have them on too. As the way they advise it would be wrong as he did...;) I don't know asus is lying? :p

[M@deira]

Little update:

New PSU, TT 1000W:

http://img57.imageshack.us/img57/4939/dsc08699adrenahs1.jpg

http://img407.imageshack.us/img407/4436/dsc08693adrenall4.jpg

The cable is too shot, so I had to make an extension to fit the cabe inside:

http://img407.imageshack.us/img407/6592/dsc08702adrenawx0.jpg

http://img139.imageshack.us/img139/609/dsc08703adrenakd6.jpg


Iany told me to put the fans pushing air to the Rad (pulling before), so that's what I did :)

http://img139.imageshack.us/img139/7567/dsc08694adrenajm3.jpg

http://img57.imageshack.us/img57/2064/dsc08697adrenals3.jpg

http://img407.imageshack.us/img407/4660/dsc08698adrenala9.jpg

Older pics (http://www.xtremesystems.org/forums/showpost.php?p=2547552&postcount=5676)

Bye
:wave:

Sassa e seu micro...

Show de bola cara.... o micro ficou 10

Abração é nois..

M@deira

[IanY]

That wimpy noisy Asus mosfet fan has to go. Mine get tossed into the trash from day one lol Find a Zalman bracket or some other contraption. Strap on a silent 120mm fan. You will get a ton more airflow and it will save your sanity. You can also use an Antec Spotcool (set on medium), but I think that looks questionable.

[dnb#]

That wimpy noisy Asus mosfet fan has to go. Mine get tossed into the trash from day one lol Find a Zalman bracket or some other contraption. Strap on a silent 120mm fan. You will get a ton more airflow and it will save your sanity. You can also use an Antec Spotcool (set on medium), but I think that looks questionable.

Or you just set them to 30-40% of their rpm's, I can tell you that doesn't make noise at all...everything is watercooled and passive cooled and the only thing I hear sometimes is a waterbubble...And secondly an 120mm fan is freaking ugly in a wonderful setup...I put almost all my cash in my pc (the rest of the time I'm drunk ;) ) and the last thing I want is an ugly case full with air cooled garbage...The same as cooling your ram with an 120mm fan, it's just nonsense...I'm running it 160mhz more than stock with tight timings, just buy reasonable RAM, and an intake fan at 500rpm and an outtake fan at 500rpm and a zalman600hp which doesn't make noise even not if you want to.

[Zeus]

A fan over your ram nonsense huh? Untill you push it mate, untill you push it.

[su3_zero]

nice case hein sasa... muito maneiro

[Origin_Unknown]

Sassa e seu micro...

Show de bola cara.... o micro ficou 10

Abração é nois..

M@deira

well done

[JohannesRS]

Hey guys, com'on. This is an international site. I'm brazilian too, and it not even a glimpse in my mind to write in any language that's not so widelly spread as english. Please, keep in mind that this kind of stuff will only make everybody hates us a bit more at every single post.

Anyway, TRULLY beautifull wcs on page 235. :)

[rbsmontemor]

Sassa e seu micro...

Show de bola cara.... o micro ficou 10

Abração é nois..

M@deira

Thanks! But you really need to write in English here :)

That wimpy noisy Asus mosfet fan has to go. Mine get tossed into the trash from day one lol Find a Zalman bracket or some other contraption. Strap on a silent 120mm fan. You will get a ton more airflow and it will save your sanity. You can also use an Antec Spotcool (set on medium), but I think that looks questionable.

I'll try later! What do you think about Thermaright's mosfet cooling?

A fan over your ram nonsense huh? Untill you push it mate, untill you push it.

Ballistix Tracer gets REALLY HOT, even @ 1.8v...

nice case hein sasa... muito maneiro

Hello buddy :) Thanks for the words, but portuguese isn't the best way to talk over there :up:

Hey guys, com'on. This is an international site. I'm brazilian too, and it not even a glimpse in my mind to write in any language that's not so widelly spread as english. Please, keep in mind that this kind of stuff will only make everybody hates us a bit more at every single post.

Anyway, TRULLY beautifull wcs on page 235. :)

Yeah that's true :up: English please :D


Rbs.
:wave:

[IanY]

Naturalmente, nós falamos o inglês aqui.

If you think I wrote that Portugese, I have a few bridges to sell you :)

Thermalright's mosfet blocks look sexy, as do all their heatsinks, but then they still need darn airflow. So, its all the same thing.

[rbsmontemor]

Naturalmente, nós falamos o inglês aqui.

If you think I wrote that Portugese, I have a few bridges to sell you :)

Thermalright's mosfet blocks look sexy, as do all their heatsinks, but then they still need darn airflow. So, its all the same thing.

hahaha, maybe the online translator wrote that for you?? :rofl:

Rbs
:wave:

[leo_bsb]

nice case sassa, mine is running right now, need a few tweaks but it is done.
http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18291024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18301024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18331024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18481024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18471024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18451024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18521024x768-1.jpg

[rsmaverick]

Damn nice build Steffen. I love the blue lighting.

[rbsmontemor]

@leo_bsb

Thanks! Your rig is nice too :)

How about the full load temps?? :)

Rbs
:wave:

[dnb#]

A fan over your ram nonsense huh? Untill you push it mate, untill you push it.

that's what I said, If you just buy reasonable ram and place your fans right it wouldn't be a problem 160mhz over stock with OCZ's reapers worked fine with me on really tight timings, But I must agree ballistx tracers get hot fast enough and they are good clockers. I was planning to buy a pair of these but I don't want that christmas lamps in my computer and I think OCZ's reapers are much more beatiful. And I must say I was stunned about their abbilities :confused: I thought they wouldn't hold their timings tight when you push is far over, but now I really don't want other sticks...

But Generally you're right :)

[deepsilver]

nice case sassa, mine is running right now, need a few tweaks but it is done.
http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18291024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18301024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18331024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18481024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18471024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18451024x768.jpg

http://i104.photobucket.com/albums/m197/leo_bsb/Watercooler/IMGP18521024x768-1.jpg

Nice and clean System, I like it. :up:

[CyberDruid]

I just want too say that I am glad the petty-ass whiners have either been banned or deleted or left this thread. They had nothing to add but hate.

Thanks Mods :)

Loving the latest works.:up:

[Zeus]

that's what I said, If you just buy reasonable ram and place your fans right it wouldn't be a problem 160mhz over stock with OCZ's reapers worked fine with me on really tight timings, But I must agree ballistx tracers get hot fast enough and they are good clockers. I was planning to buy a pair of these but I don't want that christmas lamps in my computer and I think OCZ's reapers are much more beatiful. And I must say I was stunned about their abbilities :confused: I thought they wouldn't hold their timings tight when you push is far over, but now I really don't want other sticks...

But Generally you're right :)


Don't want to trash this thread too much but a last word about the mem, if you don't want these x-mas tree leds, just buy ballistix instead of tracers, same ram but without the leds.

As for a fan over the ram, the Dominator ram-cooler without the stickers or the OCZ xtc cooler aren't that ugly. ;)

[leo_bsb]

@leo_bsb

Thanks! Your rig is nice too :)

How about the full load temps?? :)

Rbs
:wave:
44-44-40-44 full load (orthos and atitools artifact on the 8800GTS) stock frequencies.
I'll start overclock this week.

[dnb#]

Don't want to trash this thread too much but a last word about the mem, if you don't want these x-mas tree leds, just buy ballistix instead of tracers, same ram but without the leds.

As for a fan over the ram, the Dominator ram-cooler without the stickers or the OCZ xtc cooler aren't that ugly. ;)

But the reapers without any fans ovr it or something identical are a lust for the eye too :D (i think)
but generally fans are just a wast of silence in my room :) your mem isn't going to burn out if you don't put a fun on it...Never happened to me? and believe me I wasted much hardware.....

[su3_zero]

nice case leo, so clean.!!!

[RockfordFosgate]

My new V2000B PlusII after TJ07 :D

http://img160.imageshack.us/img160/4104/13bt0.jpg

http://img240.imageshack.us/img240/8492/26810672qs0.jpg

http://img219.imageshack.us/img219/1306/15549264db9.jpg

http://img219.imageshack.us/img219/6525/63635171tq1.jpg

http://img251.imageshack.us/img251/1161/59678077ng5.jpg

http://img219.imageshack.us/img219/9575/16010182ma4.jpg

http://img217.imageshack.us/img217/4079/12894760vb0.jpg

http://img215.imageshack.us/img215/3482/42698375gr3.jpg

[Origin_Unknown]

leo_bsb you could get the slight benefits of dual channel ram if you move one stick to the right :)

[tiro_uspsss]

leo_bsb you could get the slight benefits of dual channel ram if you move one stick to the right :)

nice spot! :up:

[Red Evil]

My new V2000B PlusII after TJ07 :D


Thats awesome!
Btw, PSU can be fitted that place without modding anything?

[leo_bsb]

thanks, I noticed that in the first screen of BIOS post and moved that stick.

[Waterlogged]

I just want too say that I am glad the petty-ass whiners have either been banned or deleted or left this thread. They had nothing to add but hate.

Thanks Mods :)

Loving the latest works.:up:

Now why did you have to go and drag that up? If I didn't know better, I'd say you were trolling for a fight. ;) AFAIK, most of the ppl that objected to your using this thread as a work log are still around. The thread title does say "case gallery" (not "how I built a pump mount") after all.

I do agree with you about many of the latest rigs posted being very very good, I just don't feel the need to stroke everyone.

[Aldy402]

re did my loop after adding in the maximus nb
the case is a lian li pc-201b just in case anybody asks
changed from blue to red but i'll think ill use black tubing the next time around

http://img410.imageshack.us/img410/2969/22303541oi9.jpg
http://img128.imageshack.us/img128/4229/99459770ih0.jpg
http://img134.imageshack.us/img134/9573/98002473eg4.jpg
http://img510.imageshack.us/img510/2084/39840523qy6.jpg

[IanY]

RockfordFosgate,

You better hurry up and buy the copper top for your GTX before these aluminum hating monsters eat you up lol ;)

[RockfordFosgate]

RockfordFosgate,

You better hurry up and buy the copper top for your GTX before these aluminum hating monsters eat you up lol ;)

I'm controled the top but no problem.;)

I'm always Using AQUA's Anticorosion Liquid and I dont have a problem :up:

[IanY]

I'm controled the top but no problem.;)

I'm always Using AQUA's Anticorosion Liquid and I dont have a problem :up:

Never have a problem myself lol :up: And I actually have a copper top at home but never bothered to switch it out. Opened it up two weeks ago. Nothing... nothing at all :p:

[emaniac]

Now why did you have to go and drag that up? If I didn't know better, I'd say you were trolling for a fight. ;) AFAIK, most of the ppl that objected to your using this thread as a work log are still around. The thread title does say "case gallery" (not "how I built a pump mount") after all.

I do agree with you about many of the latest rigs posted being very very good, I just don't feel the need to stroke everyone.

to CD :
i do not know what is all about, but i give a less then a cent to that you sell some of your rigs. that is not a theme in this tread and not of my concern...
I agreed with Waterlogged...

ps. I built one moded case and maybe thinking to sell it, but don't talk about...
on the other hand, may be wrong :)

no offense to any1 :shrug:

ps2 : through-window-IWAKI external wc system is one of my favorites and must-to-do mod things. on that, GO ON...

[CyberDruid]

Now why did you have to go and drag that up? If I didn't know better, I'd say you were trolling for a fight. ;) AFAIK, most of the ppl that objected to your using this thread as a work log are still around. The thread title does say "case gallery" (not "how I built a pump mount") after all.

I do agree with you about many of the latest rigs posted being very very good, I just don't feel the need to stroke everyone.

Who said anything about worklogs ;) You assume too much especially since you can go back and look at my posts and see NO worklogs here. Just a lot of petty BS from some whiners.

I was taking note of the numerous Quotes including pictures just to say "good job" which just recently were a source of such annoyance for everyone...and now aren't: go figger.

You may now unwad.

[disruptfam]

Awesome Rigs!!!! Rockford And Aldy!!!!!

Lian Li Lovers Just Like Myself!!!

:)

[step]

Aldy402 and RockfordFosgate, did you both cut the bottom of your case and attach the rad? Or just plonked it on the top of it?

Btw nice builds :)

[Digital Nirvana]

Who said anything about worklogs ;) You assume too much especially since you can go back and look at my posts and see NO worklogs here. Just a lot of petty BS from some whiners.

I was taking note of the numerous Quotes including pictures just to say "good job" which just recently were a source of such annoyance for everyone...and now aren't: go figger.

You may now unwad.

lets not dig this :banana::banana::banana::banana: up again, back to the pictures

[Aldy402]

Aldy402 and RockfordFosgate, did you both cut the bottom of your case and attach the rad? Or just plonked it on the top of it?

Btw nice builds :)

it was jigsawed for airflow, a complete necessity
thanks everybody

[SparkyJJO]

How hard was it to get the air out of your fuzion with it upside down aldy?

[deepsilver]

re did my loop after adding in the maximus nb
the case is a lian li pc-201b just in case anybody asks
changed from blue to red but i'll think ill use black tubing the next time around

http://img410.imageshack.us/img410/2969/22303541oi9.jpg
http://img128.imageshack.us/img128/4229/99459770ih0.jpg
http://img134.imageshack.us/img134/9573/98002473eg4.jpg
http://img510.imageshack.us/img510/2084/39840523qy6.jpg

This watercolor suck's. :down:

[Aldy402]

How hard was it to get the air out of your fuzion with it upside down aldy?

it doesn't make a difference for me upright or upside down, I bleed in literally 2 minutes. Most likely because of the ek res

[Aldy402]

This watercolor suck's. :down:

yea its supposed to be red but combined with the flash of the camera
it looks crappy

no more colors for me, im moving to tygon black.. but thanks for your commentary

[Canadmos]

Just so I can have a reference of the size, what reservoir is that Aldy? The Ek 250?

[Aldy402]

Just so I can have a reference of the size, what reservoir is that Aldy? The Ek 250?

150

[Canadmos]

Oh, it is bigger than I realized. oops

[stormshadow]

whoa. that doesn't look like a 150...

but i guess the 100 is smaller than that.

[Bartflaster]

Some small not so obvious tweeks, but a good few hours work ... Mobo I suspect had some dry joints that came to light installing memory a month or so back, and didn't cope with the transplant intact, so was swapped for a replacement but in BFG flavour.

And the PSU was annoying me, it aint that loud, but as everything was geared for ultra low noise it was the loudest thing in the system.
So that was swapped out for a Corsair unit.

Wonderfully quiet now, but that did mean another cable routing session :o
While I was at it I tidyied the tubing a little as coming from the resovoir looked too wayward to me, I have to have some slack to slide the res forward for maintenance so I decided pipe clips would help tidy it up and I could just unhook the tube when I need to slide the res forward :)

http://homepage.ntlworld.com/gypsypirates/images/wcp15.jpg

http://homepage.ntlworld.com/gypsypirates/images/wcp16.jpg

http://homepage.ntlworld.com/gypsypirates/images/wcp17.jpg

[Sta!nless]

Nice build and good idea on those clips.

[Astratuner]

im getting more and more satisfied by the tj07 case.


Only problem is that u may have to buy a 5.25" to 3.5" bay in order the get the hard drives installed right ?

[Bartflaster]

Yes, thats the case unless you use a 120.2 rad, then you can probably use one of the supplied bottom mounted bay racks.
There are plenty of 5.25 bays ... having said that, I have used them all, what with the Karma fan grill, one HDD, 2 DVDRW drives, Fan controller and Bay Res.
But without the Karma I could fit 3 HDD's in the space.

[The_Beast]

nice WC :up:

[Tile]

The setup looks really nice and clean.

[Riverna]

Hey guys, here my pictures :)

http://www.milan-clan.org/~riverna/Hardware%20Bilder/Wasserk%fchlung/DSC02208.JPG

http://www.milan-clan.org/~riverna/Hardware%20Bilder/Wasserk%fchlung/DSC02210.JPG

http://www.milan-clan.org/~riverna/Hardware%20Bilder/Wasserk%fchlung/DSC02211.JPG

http://www.milan-clan.org/~riverna/Hardware%20Bilder/Wasserk%fchlung/DSC02228.JPG

http://www.milan-clan.org/~riverna/Hardware%20Bilder/Wasserk%fchlung/PcNr1.jpg

http://www.milan-clan.org/~riverna/Hardware%20Bilder/Wasserk%fchlung/PcNr2.jpg

[tiro_uspsss]

@ Riverna: ur res isnt big enuff :p:

[disruptfam]

sexy rig bartflaster very clean and sleek!

[Zytek_Fan]

Someone show me a res tornado!!! I <3 them :D

[CowGuy]

I feel embarrassed, all these systems are so much neater then mine.

[NoRogeR]

Riverna is probably getting a lot of leaks, so a huge reservoir keeps cool :rofl:
j/k ;)

[fireice2]

My first water cooling project. :D

From this...
http://i54.photobucket.com/albums/g116/fireice2/stacker/inside1.jpg

To this...
http://i54.photobucket.com/albums/g116/fireice2/stacker/inside3resized.jpg

[phelan1777]

:clap: thank you for adding to the Stacker thread as well.

[disruptfam]

awesome rig fireice2!!! i love those aero-cool white led fans!! look sik!

[fireice2]

@phelan
NP. :D I'd still be a stock user if it were not for XS. and I would still be using cheap cases if not for the Stacker tread. :D


@disruptfam
Thanks. One more upgrade to make... get rid of my 8600GT and get a better GPU. hehehe after that I'm sitting tight till I finish taking the Bar exams. :D

[Origin_Unknown]

fireice2 can i get some more pics of your case? i wub the 830 and always wondered for people cool it

[fireice2]

fireice2 can i get some more pics of your case? i wub the 830 and always wondered for people cool it

Its an 832 actually. :D hehehe

[msarp]

Here is my First attempt !

This is my EVGA 8800GT SSC W/ MAZE 5 and Enzotech BMR-C1 Copper Ramsinks.
http://i120.photobucket.com/albums/o197/msarp/IMG_2586.jpg

The outside: LIAN LI PC-A16B
http://i120.photobucket.com/albums/o197/msarp/001.jpg


The inside:
http://i120.photobucket.com/albums/o197/msarp/005.jpg

[Xilikon]

Dust off that radiator :shocked:

[Scubar]

Yea that definately needs dusting, thats going to be hurting your temps.

[ka lok]

Hi guys, have updated me baby and am here to show her off!!!

Enjoy

[Origin_Unknown]

Its an 832 actually. :D hehehe

can we get some more pics then please :D

[deepsilver]

yea its supposed to be red but combined with the flash of the camera
it looks crappy

no more colors for me, im moving to tygon black.. but thanks for your commentary

That's a good decision. :D

[stormshadow]

Hi guys, have updated me baby and am here to show her off!!!
http://www.xtremesystems.org/forums/attachment.php?attachmentid=68001&stc=1&d=1196356516
Enjoy

is it just me?

but i think the waterflow on your fuzion is backwards.

[deepsilver]

My AquaDrive:

http://i223.photobucket.com/albums/dd287/deepsilber/AquaDrive.jpg

with Cuplex:

http://i223.photobucket.com/albums/dd287/deepsilber/AquaDrive_with_Cuplex.jpg

and the new AquaStream XT Ultra:

http://i223.photobucket.com/albums/dd287/deepsilber/AquaStream_1.jpg

http://i223.photobucket.com/albums/dd287/deepsilber/AquaStream_2.jpg

http://i223.photobucket.com/albums/dd287/deepsilber/AquaStream_3.jpg

[SparkyJJO]

is it just me?

but i think the waterflow on your fuzion is backwards.

nope not just you, I think you're right! Looks like the pump outlet is straight to the corner outlet of the fuzion, not the inlet...

[MorGo7h]

Just fix the fuzion and you have a nice rig :D

[Xilikon]

Not me, it looks right. If you look at other pics, you will see a tube coming from the pump to the radiator and another coming up from the rad 90 degree to the CPU. It's just a optical illusion caused by a picture angle.

[Mekrel]

It's wrong, the water is flowing out of the FuZion inlet, into northbridge block, into GPU block and then into the reservoir.

[Xilikon]

Doh, looked at the wrong place :doh:

[Spawne32]

My AquaDrive:

IMG]http://i223.photobucket.com/albums/dd287/deepsilber/AquaDrive.jpg[/IMG]

with Cuplex:

IMG]http://i223.photobucket.com/albums/dd287/deepsilber/AquaDrive_with_Cuplex.jpg[/IMG]

and the new AquaStream XT Ultra:

http://i223.photobucket.com/albums/dd287/deepsilber/AquaStream_1.jpg

http://i223.photobucket.com/albums/dd287/deepsilber/AquaStream_2.jpg

http://i223.photobucket.com/albums/dd287/deepsilber/AquaStream_3.jpg


I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?