Water Cooled Case Gallery [Archive] - Page 18

lowfat

07-19-2007, 02:38 PM

@lowfat
nice one! what is that fan blowing across the gfx?

That would be an Antec SpotCool, amazing little thing. I will eventually buy another to get rid of the OCZ XTC cooler.

@ lowfat - awesome setup, nice and clean. may i ask how you mounted your rad in the top section of that stacker?

Uhhh, would you laugh if i said 3M moulding tape :rofl:
The way the stacker 830 fan is held up there (with some silly plastic mounting bracket), I could figure no other way as space is very limited. But it works :)

coolrmaster

07-19-2007, 04:47 PM

hey sunny need some more info and pics here

what case is that?

aiya

07-19-2007, 05:08 PM

Uhhh, would you laugh if i said 3M moulding tape :rofl:
The way the stacker 830 fan is held up there (with some silly plastic mounting bracket), I could figure no other way as space is very limited. But it works :)
whatever works :up:
got any pics of your handy work? :D

lowfat

07-19-2007, 05:15 PM

whatever works :up:
got any pics of your handy work? :D

not really, can't get a good picture as there is a huge cross beam in the way.

mukmaster

07-19-2007, 09:26 PM

I am so lovin all of the water round here . I will post revised pics of my setup I cleaned it up allot so no need to pick on it .

YugenM

07-19-2007, 11:13 PM

hey sunny need some more info and pics here

what case is that?

Yeong Yang YY-something or other

Waterlogged

07-19-2007, 11:23 PM

hey sunny need some more info and pics here

what case is that?

Yeong Yang YY-something or other

YY-0420 with the doors off I believe.

The YY's are a very nice cube case alternative if your on a tighter budget than a MM or LL will allow.

RRIII

07-20-2007, 12:52 AM

Dont know if this still falls into the case gallery but here it goes..

E6600, BFG 8800GTX OC version, In9 32X max MoBo, 1GBx2 Corsair Dominator 6400, TT Toughpower 850

PA120.3, DCC2 + Petra's top, EK Full block, Pentosin w/ PT Nuke, 7/16 Masterkleer, micro res and Dtek Fuzion.

Ambient: 30C
Idle: 28C Load: 37C

My testing bench and temporary "case" while im finishing up my 2nd case project.
http://img340.imageshack.us/img340/9325/img0791qu7.jpg

http://img340.imageshack.us/img340/6959/img0788ob4.jpg

Glad i bought that book! :rofl:
http://img340.imageshack.us/img340/1329/img0790rc5.jpg

safan80

07-20-2007, 01:32 AM

Dont know if this still falls into the case gallery but here it goes..

E6600, BFG 8800GTX OC version, In9 32X max MoBo, 1GBx2 Corsair Dominator 6400, TT Toughpower 850

PA120.3, DCC2 + Petra's top, EK Full block, Pentosin w/ PT Nuke, 7/16 Masterkleer, micro res and Dtek Fuzion.

Ambient: 30C
Idle: 28C Load: 37C

My testing bench and temporary "case" while im finishing up my 2nd case project.
http://img340.imageshack.us/img340/9325/img0791qu7.jpg

What's you temps on the GPU? I like having the GPU in it's own loop.

Jedda

07-20-2007, 04:16 AM

What's you temps on the GPU? I like having the GPU in it's own loop.

What, on your's?
He's both cpu and gpu in his loop.

perfection

07-20-2007, 05:14 AM

http://img340.imageshack.us/img340/6959/img0788ob4.jpg

I think you have one of your RAM sticks in the wrong slot

tiro_uspsss

07-20-2007, 05:20 AM

I think you have one of your RAM sticks in the wrong slot

yeah, i would have to agree there - that looks like its running in single channel - correct? if so, y?

septim

07-20-2007, 07:02 AM

$unny more pics pls.

RRIII looking good externally setup like that. how about some previews of said being modded case?

RRIII

07-20-2007, 07:18 AM

What's you temps on the GPU? I like having the GPU in it's own loop.

GPU Idle: 42C (Load temps not available atm).. Well in my case, having the GPU on its own loop would probably be an overkill since im getting ideal temps as it is.

Oh btw, CPU is clocked at 3ghz, Gpu 600mhz and vcore is set 1.36v.

I think you have one of your RAM sticks in the wrong slot

oh! didnt realize i wasnt running them on dual channel for awhile there. thanks for the good find!

RRIII

07-20-2007, 07:31 AM

$unny more pics pls.

RRIII looking good externally setup like that. how about some previews of said being modded case?

Here's a lil preview but not giving too much away..Modding it from the ground up..Just barely started so it will probably take me another 2 weeks or so to finish this up.
http://img340.imageshack.us/img340/2554/dsc00570xh6.jpg

LL V2100
http://img340.imageshack.us/img340/616/dsc00463vy2.jpg

Litlratt

07-20-2007, 12:33 PM

I told Seth I'd post once I got both units going.
Need to edit my sig now.

Nazu

07-20-2007, 12:52 PM

http://koti.mbnet.fi/nazu/Kone/watercooling%20(800%20x%20600).jpg

Parts in sig :)

newls1

07-20-2007, 01:36 PM

Litlrat, hold good god that looks freaking sweet! Thanks for posting your installed pics

Litlratt

07-20-2007, 01:53 PM

Litlrat, hold good god that looks freaking sweet! Thanks for posting your installed pics

You're welcome.

Cola

07-20-2007, 02:08 PM

:) Hi everyone, I have not posted on this thread before but have just finished rebuilding my rig.

This is my first venture into liquid cooling and I have to say a big thank you to many threads in these forums, they provided invaluable help on how to set everything up. This is the quietest rig I have ever built thanks to the Mcubed BigNG fan controller, it's absolutely brill!

Anyway.....some pics.....not as good as some of the great rigs in this thread but not bad for my first go.

http://i187.photobucket.com/albums/x149/Colapics/Cola_wc1.jpg

http://i187.photobucket.com/albums/x149/Colapics/Cola_wc2.jpg

http://i187.photobucket.com/albums/x149/Colapics/Cola_wc3.jpg

http://i187.photobucket.com/albums/x149/Colapics/Cola_wc4.jpg

SaII

07-20-2007, 02:49 PM

I really like the big blue cable sleeving

hah
it really jumps out, nice work

sdkevin

07-20-2007, 05:30 PM

still on the desk :) anyway these are the best I can do for now.

http://i19.photobucket.com/albums/b161/sdkevin/LLFR4.jpg

http://i19.photobucket.com/albums/b161/sdkevin/LLFR5.jpg

does anyone successfully running these pumps (DDC-2) in series for long time? it was running good as single but put them in series :( died, only one left is running now, I had it almost a year and finally decided to put them in series so :( Iwaki RD-30 here I come!!!

kaiden

07-20-2007, 10:13 PM

http://img55.imageshack.us/img55/7463/stacker830threems4.jpg (http://imageshack.us)
Shot with Canon PowerShot SD200 (http://profile.imageshack.us/camerabuy.php?model=Canon+PowerShot+SD200&make=Canon) at 2007-07-18

http://img441.imageshack.us/img441/8408/stacker830onelj9.jpg (http://imageshack.us)
Shot with Canon PowerShot SD200 (http://profile.imageshack.us/camerabuy.php?model=Canon+PowerShot+SD200&make=Canon) at 2007-07-18
http://img412.imageshack.us/img412/2513/stacker830twoal4.jpg (http://imageshack.us)
Shot with Canon PowerShot SD200 (http://profile.imageshack.us/camerabuy.php?model=Canon+PowerShot+SD200&make=Canon) at 2007-07-18

ive got the same case and would really like to set mine up and nice as yours, "if i can >_<" any tips or helpfull advise : D ??
thanks.

ruff97

07-21-2007, 05:48 AM

I am still work on it here some pic of my rig

http://www.ruffrd.com/rdpic/wcpc/upwc4.JPG

http://www.ruffrd.com/rdpic/wcpc/upwc1.JPG

http://www.ruffrd.com/rdpic/wcpc/upwc2.JPG

http://www.ruffrd.com/rdpic/wcpc/upwc3.JPG

Concept 5000-FX

07-21-2007, 08:24 AM

I love my radiators well done :D (BBQ)

lowfat

07-21-2007, 08:32 AM

ive got the same case and would really like to set mine up and nice as yours, "if i can >_<" any tips or helpfull advise : D ??
thanks.

Remove the HDD rack if you are watercooling, You can easily fit a decent radiator up from if it is removed.

sbinh

07-21-2007, 06:51 PM

My TT Armor case ..... It's heavy like hell .....:rofl: :rofl: :rofl:

http://img225.imageshack.us/img225/1118/44828071at8.jpg

http://img225.imageshack.us/img225/6817/79783756dp6.jpg

http://img214.imageshack.us/img214/3516/37509734ez0.jpg

http://img451.imageshack.us/img451/8881/28880606ff3.jpg

http://img214.imageshack.us/img214/6838/47228395vn1.jpg

http://img225.imageshack.us/img225/341/75237755fo6.jpg

http://img214.imageshack.us/img214/6567/78753701fo3.jpg

http://img225.imageshack.us/img225/8290/42076920tt4.jpg

http://img451.imageshack.us/img451/9940/80195186yn0.jpg

FeKeLeR

07-21-2007, 10:02 PM

Danger Den Water Box Plus
Evga 680i SLI
Evga 8800 GTS
Intel E6600
Crucial Ballistix 6400
2 WD Raptor 150 Sata Raid (0+1)
Seagate 320 HD Sata
DVD/RW 18X Sata
Creative X-FI
Danger Den TDX Water Block (High Flow Nozzle)
Thermochill Rad 120.2
1/2 ID Tygon Tubeing
Thermaltake 700 PSU
Viewsonic 22 HD WideScreen Built in 1.6 megapixel camera & VOIP Mic
Logitech Z5500
Logitech G-15 Keynoard
Logitech G-18 Mouse

kaiden

07-21-2007, 11:50 PM

where did you mount your drives lowfat?

CyberDruid

07-22-2007, 12:19 AM

http://img55.imageshack.us/img55/5361/lc001fc6.jpg
http://img410.imageshack.us/img410/6413/lc002vb0.jpg
http://img143.imageshack.us/img143/1845/lc003at8.jpg
http://img244.imageshack.us/img244/5038/lc005je5.jpg
http://img83.imageshack.us/img83/9688/lc006td2.jpg
http://img524.imageshack.us/img524/6163/wc010jv6.jpg
http://img102.imageshack.us/img102/4980/wc009bb0.jpg
http://img524.imageshack.us/img524/5051/wc008eo4.jpg
http://img410.imageshack.us/img410/5899/wc007jr6.jpg
http://img102.imageshack.us/img102/9012/wc006yk1.jpg

PC7A Plus II
Sound Dampening mods
Grommet mod for fan mounts
San Ace 103 CFM fans
Blue Aluminum HDD silencers
UV blue acrylic front panel modded for fan bus/light switches/Slot Drive PX716AL
Clear acryilic 1 bay reservoir
Metallic Blue Thermochill (FTW) PA160 and shroud
D-tek db-1 pump
D-tek FuZion CPU Waterblock
1/2" ID/ 3/4" OD Clearflex
Stainless Steel Pinch Clamps
PC Ice
D-tek FX UV reactive clear blue dye.

perfection

07-22-2007, 12:25 AM

my PC as of now :D

http://i115.photobucket.com/albums/n297/marty_nguyen/DSC00982.jpg

CyberDruid

07-22-2007, 12:28 AM

wow that's a very tidy loop

perfection

07-22-2007, 12:29 AM

wow that's a very tidy loop

thanks, very nice UV colour is your loop Cyber. is it the tubing or coolant that's the UV reactive??

Ad1tya

07-22-2007, 12:44 AM

^^ Looks like Pentosin G11 to me.

Steffen

07-22-2007, 12:48 AM

New Case. Still there has to be done a lot. Waiting for an order from my modding dealer ;)

http://www.abload.de/img/neues_gehuseteil2ckb.jpg

http://www.abload.de/img/img_20654nx.jpg

xtnor

07-22-2007, 06:08 AM

My Case. Extra long tubing. Will replace hardware and water blocks after summer...

stinka

07-22-2007, 08:59 AM

heres my updated rig :

http://i57.photobucket.com/albums/g216/savagemoneypit/DSCN3012-1.jpg

http://i57.photobucket.com/albums/g216/savagemoneypit/DSCN3008.jpg

http://i57.photobucket.com/albums/g216/savagemoneypit/DSCN3013.jpg

http://i57.photobucket.com/albums/g216/savagemoneypit/DSCN3018.jpg

SoulsCollective

07-22-2007, 09:31 AM

Aargh, no! Elbow fittings! Bad!

Seriously, they slaughter your flow rates - if it's at all possible, try and get a run of tubing between your CPU block and rad, rather than the elbow.

stinka

07-22-2007, 09:54 AM

Aargh, no! Elbow fittings! Bad!

Seriously, they slaughter your flow rates - if it's at all possible, try and get a run of tubing between your CPU block and rad, rather than the elbow.

i know mate but its that tight, tubing kinks, i tried many options and besides a 15mm copper plumbing fitting is much bigger than the 7/16 tube bore so i doubt it even makes a diff

heres my temps :

http://i57.photobucket.com/albums/g216/savagemoneypit/newtemps.jpg

SparkyJJO

07-22-2007, 10:23 AM

That copper elbow isn't as bad as most elbows. It has a more gradual bend to it than the typical right-angle on the others. And, judging by the temps, it's fine.

arctic_storm

07-22-2007, 10:58 AM

Here's my ne Core 2 Duo platform :). Works quiet nicely:

http://img337.imageshack.us/img337/1236/47318713qy5.th.jpg (http://img337.imageshack.us/my.php?image=47318713qy5.jpg)

CPU-Cooler: Danger Den TDX
NB- and Mosfet-Cooler: AnFi-Tec-Coolers for P5B Del.-Boards
GPU-Cooler: Watercool HK GPU-X 2.5 X1900 SW

Radiator etc. are in an extra case, maybe some of you remember :). Unfortunately I haven't got the pics anymore (my webspace account was deleted :().

Edit: No, that's not me on the pic, it's my father :D.

Steffen

07-22-2007, 12:26 PM

A few LED´s ;)
http://www.abload.de/img/wak194n9p.jpg

mcoffey

07-22-2007, 12:32 PM

Aargh, no! Elbow fittings! Bad!

Seriously, they slaughter your flow rates - if it's at all possible, try and get a run of tubing between your CPU block and rad, rather than the elbow.

quite simply, a myth. they effect some, but no where near kill, slaughter or destroy flow rates. depending on the type of elbow, and present flow rate, very little effect if any at all on temps.

andyc

mcoffey

07-22-2007, 12:37 PM

heres my updated rig :

great build, very smart and well done.

congrats on a fine build and welcome to XS.

andyc

zarathrustra

07-22-2007, 12:40 PM

Here's some pics of my case. I still need to replace all the Tygon (hence the unsightly join in the length feeding the radiator).

http://img137.imageshack.us/img137/2138/0kq1.jpg (http://imageshack.us)

http://img170.imageshack.us/img170/1563/1wd3.jpg (http://imageshack.us)

http://img87.imageshack.us/img87/4664/2vm1.jpg (http://imageshack.us)

http://img87.imageshack.us/img87/1723/3ef9.jpg (http://imageshack.us)

http://i132.photobucket.com/albums/q10/zarathrustra1/8800gtx2.jpg

http://i132.photobucket.com/albums/q10/zarathrustra1/Case.jpg

SparkyJJO

07-22-2007, 12:48 PM

Sweet another s939 setup, I'm not alone :D

zarathrustra

07-22-2007, 12:55 PM

Sweet another s939 setup, I'm not alone :D

Heh, I just managed to sell the CPU/Mobo/RAM, and am ordering a Q6600 today, and a cheap 965-DS3 to hold me over until the DFI-P35 LP makes it's way to New Zealand. :D

I have a nice set of Crucial Ballistix 8500 to pair up with it. :)

And, unless I manage to dummy up some sort of 775 mount for this 939 TDX, I may to to swap it out for an old Apogee I have. :(

St3vil_68

07-22-2007, 04:17 PM

First, a BIG thanks to all the valuable info in the water cooling forum! After a great deal of reading I put together a decent machine, although it still needs a few minor things-like the 2 open bays...

http://members.aol.com/mm2246220/images/MM_01.jpg

http://members.aol.com/mm2246220/images/MM_02.jpg

http://members.aol.com/mm2246220/images/MM_03.jpg

http://members.aol.com/mm2246220/images/MM_04.jpg

http://members.aol.com/mm2246220/images/MM_05.jpg

http://members.aol.com/mm2246220/images/MM_06.jpg

E6600@ 3.735 1.45v
MSI 8800 Ultra 720/1674/2430
eVGA 680i NF68-A1
OCZ 2N10662GK 4.4.4.10 2T @1066
2 X WD Raptor 74GB
1 WD 250GB Storage
Enermax Galaxy 1000w
MM Duality

Loop 1 D5-> PA120.3-> D-Tek Fuzion -> EK250
Loop 2 D5-> PA120.3-> EK680 NB -> EK Full Cover-> EK250

safan80

07-22-2007, 04:39 PM

nice loops St3vil_68!

Grinch

07-22-2007, 05:20 PM

First, a BIG thanks to all the valuable info in the water cooling forum! After a great deal of reading I put together a decent machine, although it still needs a few minor things-like the 2 open bays...

E6600@ 3.735 1.45v
MSI 8800 Ultra 720/1674/2430
eVGA NF68
OCZ 2N10662GK 4.4.4.10 2T
Enermax Galaxy 1000w
MM Duality

D5-> PA120.3-> D-Tek Fuzion -> EK250 34 Idle/45 Load
D5-> PA120.3-> EK680 NB -> EK Full Cover-> EK250 42 Idle/46 Load
3Dmark 14000+

:welcome: to xtremesystems

Great looking build man...love the MM cases!:up:

mcoffey

07-22-2007, 06:18 PM

First, a BIG thanks to all the valuable info in the water cooling forum! After a great deal of reading I put together a decent machine, although it still needs a few minor things-like the 2 open bays...

E6600@ 3.735 1.45v
MSI 8800 Ultra 720/1674/2430
eVGA 680i NF68-A1
OCZ 2N10662GK 4.4.4.10 2T @1066
2 X WD Raptor 74GB
1 WD 250GB Storage
Enermax Galaxy 1000w
MM Duality

Loop 1 D5-> PA120.3-> D-Tek Fuzion -> EK250
Loop 2 D5-> PA120.3-> EK680 NB -> EK Full Cover-> EK250

very nice, makes us UFO owners proud. I have a custom duality on the way, can't wait to do another UFO build.

again, very nice and congrats.

andyc

SparkyJJO

07-22-2007, 06:21 PM

Heh, I just managed to sell the CPU/Mobo/RAM, and am ordering a Q6600 today, and a cheap 965-DS3 to hold me over until the DFI-P35 LP makes it's way to New Zealand. :D

I have a nice set of Crucial Ballistix 8500 to pair up with it. :)

And, unless I manage to dummy up some sort of 775 mount for this 939 TDX, I may to to swap it out for an old Apogee I have. :(

aww bugger, all alone again :( :p:

aiya

07-22-2007, 11:08 PM

aww bugger, all alone again :( :p:
there are still plenty of people on here still using 'old school' s939 setups :)

tiro_uspsss

07-22-2007, 11:26 PM

there are still plenty of people on here still using 'old school' s939 setups :)

++1 :D

SoulsCollective

07-22-2007, 11:33 PM

there are still plenty of people on here still using 'old school' s939 setups :)
+1! Fight the Conroes! :p:

tiro_uspsss

07-22-2007, 11:36 PM

+1! Fight the Conroes! :p:

resistance is futile! u quad core lovin' traitor :p: :up: :D J/K

*looks @ QC $$$... must resist urge to buy QC*

blind_ripper

07-23-2007, 02:44 AM

almost done testing :D
http://i3.photobucket.com/albums/y90/blind_ripper/bench1/DSC00055x.jpg?t=1185183567

Patriote

07-23-2007, 07:59 AM

Nice rigs guys! And welcome to to xtremesystems, St3vil_68!

Yozzman

07-23-2007, 09:24 AM

Pete

07-23-2007, 09:32 AM

Does it matter seeing as DDC has a huge amount of head, presure and flow...erm nope!

He could put the pump up on where that inverter is and use the veritcal inlet and it would be uber short

stinka

07-23-2007, 09:50 AM

Ur tubing is way too long for that small loop...

if u check back the screenie of my temps speaks for itself :rolleyes:

zhangmaster12

07-23-2007, 11:33 AM

St3vil_68: nice rig!!!!!!! welcome to XS

SharkerSk

07-23-2007, 12:54 PM

D-tek Fuzion replaced by Viscool CPU WB :D
http://img520.imageshack.us/img520/5623/viscoolcpu3jn2.jpg
http://img520.imageshack.us/img520/6584/viscoolcpu5ue4.jpg
http://img96.imageshack.us/img96/8236/viscoolcpu4zv0.jpg
http://img186.imageshack.us/img186/9878/viscoolcpu2zk6.jpg
http://img176.imageshack.us/img176/333/viscoolcpu1ik7.jpg
High waterflow ... whirlpool effect :thumb:
http://img104.imageshack.us/img104/7527/tornado3cv9.jpg
http://img410.imageshack.us/img410/3107/tornado1oq5.jpg

Patriote

07-23-2007, 01:11 PM

Pls Resize The Pics!

hecktic

07-23-2007, 02:33 PM

hmm copper pipes?

Aldy402

07-23-2007, 02:43 PM

@sharkerSK

any performance increase from replacing the fuzion with that block?

St3vil_68

07-23-2007, 03:12 PM

Thanks to all for the warm welcome. :up: I have enjoyed reading many of the topics here in my 3 week wait to get my confirmation email. :D

disruptfam

07-23-2007, 09:14 PM

Wow these rigs are awesome.It's inspired me to give watercooling a go :)I've ordered most of the gear i will need except the vga block.I was looking at the ek full covers blocks.Whats the difference between the EK-FC8800 GTX and the EK-FC8800 GTX - Acetal one's see through and one's not which one performs better and it low restrictive???

cheers

lowfat

07-23-2007, 09:39 PM

Pls Resize The Pics!

agreed. I ain't scrolling over, so i saw about 1/4 of each picture.

safan80

07-24-2007, 02:17 AM

cmon guys get a bigger monitor!!!

Patriote

07-24-2007, 02:26 AM

cmon guys get a bigger monitor!!!

You have a freaking 30" monitor man... :rolleyes: Normally, ppls run around 20"s and 1600x1200 resolution. (or same in widescreen)

But yeah, is on my future plans to get a Dell 24"

tiro_uspsss

07-24-2007, 03:45 AM

cmon guys get a bigger monitor!!!

c'mon man, get more monitors! ;)

Mad_Man

07-24-2007, 04:04 AM

or get more time to resize the pic and link them to frickin' large ones
theres a thread about this problem already...

mcoffey

07-24-2007, 04:53 AM

cmon guys get a bigger monitor!!!

agreed,

pics looked perfect at 2560x1600. i wish people would do more build pix in hi res.

andyc

Yozzman

07-24-2007, 05:30 AM

if u check back the screenie of my temps speaks for itself :rolleyes:

Temps are nice :rolleyes:
But it looks so much better with short tubing :D
But thats mayby personal...

disruptfam

07-24-2007, 08:05 AM

Wow these rigs are awesome.It's inspired me to give watercooling a go I've ordered most of the gear i will need except the vga block.I was looking at the ek full covers blocks.Whats the difference between the EK-FC8800 GTX and the EK-FC8800 GTX - Acetal one's see through and one's not which one performs better and it low restrictive???

cheers

DEFO

07-24-2007, 11:23 AM

Hi all!
After about a month of checking this Gallery i decided to go for proper water cooling (i've had Zalman Reserator1 which is kinda joke)
I've got some ideas here and this is the result. Im not using chipset coolers because im awaiting new 45nm CPU so i'll get new mobo with that and im gona use chipset coolers than.
Please let me know if there is something that you would not use or do or do somehow differently

System specs:
Case Antec PW160
Motherboard Abit AW9D-MAX
CPU C2D X6800 (ES) @ 3.793 didnt really try how far it will go yet
GPU XFX 8800GTX XXX Edition 630MHz jadro 2GHz pameti (no overclocking yet)
RAM 4 x 1Gb Team DDR2 PC2-6400 Xtreem Micron 3-3-3-8 @ 800MHz(no overclocking yet)
PSU Corsair HX620W
Sound X-Fi Xtreme Music
2x Raptor Raid0 Stripe16

Cooling:
CPU block Swiftech Apogee GTX
VGA block D-TEK FuZion GFX
Pump Swiftech MCP655-B
Radiators Swiftech MCR-320 Quiet Power 3X120mm with 6 fans Noiseblocker BlackSilent XL1 first 3 @ 7V second 3 @ 5V
Reservoir Cape Coolplex Plexi 25
Tubing Tygon R3603 1/2in. ID
Coolant FluidXP+ EXT Blood Red

Steffen

07-24-2007, 11:42 AM

Finally I´m done :D

http://www.abload.de/img/wak2272fc.jpg

http://www.abload.de/img/wak226f0z.jpg

http://www.abload.de/img/wak228fz.jpg

Grinch

07-24-2007, 11:43 AM

Finally I´m done :D

http://www.abload.de/img/wak2272fc.jpg

http://www.abload.de/img/wak226f0z.jpg

http://www.abload.de/img/wak228fz.jpg

and what an AWESOME job you did....:clap: :up:

ruff97

07-24-2007, 12:50 PM

DEFO

07-24-2007, 02:20 PM

What are your tamp like

Tell me in which program and ill post it for you

OCFX

07-24-2007, 02:31 PM

steffen, are these rosewill fans ?

ruff97

07-24-2007, 03:42 PM

Tell me in which program and ill post it for you

speedfan and coretemp

Patriote

07-24-2007, 08:46 PM

Some pics of my final build :)

http://img391.imageshack.us/img391/5346/46578055fv7.jpg (http://imageshack.us)

http://img391.imageshack.us/img391/239/46578038jx0.jpg (http://imageshack.us)

http://img391.imageshack.us/img391/5449/46578058kv0.jpg (http://imageshack.us)

http://img391.imageshack.us/img391/6753/46578072kx7.jpg (http://imageshack.us)

Loop order : EK Res 150 - MCP355 with Petra's top - EK-FC8800GTX - Thermochill PA120.3 - FuZion - MCW30 - Back to EK Res 150.

Looks great ? :)

Dark Prodigy

07-24-2007, 10:52 PM

My workstation/gamestation/media server/file server...

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0018resize-1.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0007resize-4.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0011resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0012_2resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0002resize-1.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0017resize-1.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0058resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0061resize.jpg

V I P E R

07-25-2007, 12:36 AM

safan80

07-25-2007, 12:55 AM

c'mon man, get more monitors! ;)

great! idea, but that will be after nvidia fixes DV. I had my 19" crt hooked up the second port for a while but the DV issues drove me nuts!

Steffen

07-25-2007, 01:14 AM

steffen, are these rosewill fans ?
Which fans? I´ve used YateLoon and Aerocool Silver Lightnings (the ones that shine bright in the dark :D)

neoman

07-25-2007, 05:52 AM

Dark Prodigy one of the best setups i have ever seen. How much did your wc components + case cost to you ?

SharkerSk

07-25-2007, 06:35 AM

@sharkerSK

any performance increase from replacing the fuzion with that block?

Better water flow :D

http://img465.imageshack.us/img465/3913/viscoolz2pq9.th.jpg (http://img465.imageshack.us/my.php?image=viscoolz2pq9.jpg)http://img182.imageshack.us/img182/1526/viscoolz1tf0.th.jpg (http://img182.imageshack.us/my.php?image=viscoolz1tf0.jpg)http://img511.imageshack.us/img511/3095/viscoolz3nd2.th.jpg (http://img511.imageshack.us/my.php?image=viscoolz3nd2.jpg)http://img401.imageshack.us/img401/6663/viscoolz4hb7.th.jpg (http://img401.imageshack.us/my.php?image=viscoolz4hb7.jpg)http://img295.imageshack.us/img295/7062/viscoolx1nm0.th.jpg (http://img295.imageshack.us/my.php?image=viscoolx1nm0.jpg)
http://img408.imageshack.us/img408/4039/viscoolx4rv7.th.jpg (http://img408.imageshack.us/my.php?image=viscoolx4rv7.jpg)http://img527.imageshack.us/img527/9563/viscoolx3dk1.th.jpg (http://img527.imageshack.us/my.php?image=viscoolx3dk1.jpg)http://img245.imageshack.us/img245/6398/viscoolx9ca7.th.jpg (http://img245.imageshack.us/my.php?image=viscoolx9ca7.jpg)http://img72.imageshack.us/img72/9701/viscoolx8ge3.th.jpg (http://img72.imageshack.us/my.php?image=viscoolx8ge3.jpg)http://img340.imageshack.us/img340/818/viscoolx6jh1.th.jpg (http://img340.imageshack.us/my.php?image=viscoolx6jh1.jpg)

Temperatures and performance are compareable with Fuzion WB ;)
But new Viscool CPU WB is very cheap , you can order it here (http://www.viscool.com/index.php?page=obj1)(Only 24,- € or 29,- $ ) :up:

Grinch

07-25-2007, 09:06 AM

Some pics of my final build :)
Looks great ? :)

boy I'll say...great looking job..:up: gotta love those MM cases...:)

Grinch

07-25-2007, 09:07 AM

Dark Prodigy...great looking job!

Patriote

07-25-2007, 10:34 AM

boy I'll say...great looking job..:up: gotta love those MM cases...:)

Yup! :yepp: Thanks!

v0dka

07-25-2007, 10:39 AM

Dark Prodigy what pump is that, an Eheim?

Nice rig you got, I think it may do very good in distriuted computing. :)

Click the link in my sig. :D

PilatuS

07-25-2007, 11:32 AM

Looks like the 12 volt Eheim 1046.

YugenM

07-25-2007, 12:34 PM

Dark Prodigy what pump is that, an Eheim?

Nice rig you got, I think it may do very good in distriuted computing. :)

Click the link in my sig. :D

AquaComputer AquaStream, a variant of the 1046.

I wonder whats the manufacturer/model name of the CPU blocks he's using...

Waterlogged

07-25-2007, 09:51 PM

AquaComputer AquaStream, a variant of the 1046.

I wonder whats the manufacturer/model name of the CPU blocks he's using...

They look an awful lot like the older XSPC CPU blocks (http://www.xspc.biz/x2ocpu.php) with the newer mounting brackets.

TRG

07-26-2007, 01:22 AM

Those damned Lian-Li cases :( They make my P180 look cheap ;)

I've done a little upgrade myself, silence was my main target, and I can assure you that you won't hear anything than harddisks when I give 7 volt to my 18dB papst fans :)

http://www.nietbelangrijk.nl/download.php?id=2373

http://www.nietbelangrijk.nl/download.php?id=2375

Yozzman

07-26-2007, 05:26 AM

TRG

07-26-2007, 06:04 AM

Yeah, I know :mad:

The stupid EK waterblock did not fitted perfectly on my x1950xtx. The screws were too short, so I had to use/make some custom screws. When I noticed the bended PCB I was prepared for the worst, but hey, it's still working. But maybe I will try loosen it up (if the screw is not too short).

Somehow my videocards always bend after adding custom cooling (you should had seen my 9800pro with zalman heatsink + fan).

PCB are quite strong, so I'm not afraid, and even if it fails, it's only a good excuse to buy a 2900xt :)

Dark Prodigy

07-26-2007, 11:16 AM

Can you give us the specs of the system. It is a very nice build, congrats man.

Thanks =) Opteron 290's, 4Gb RAM, XFX 7950GT Extreme SLi, X-Fi Platinum, 2x74Gb Raptors RAID 0, 1 TB storage, PVR 500 & other stuff

Dark Prodigy one of the best setups i have ever seen. How much did your wc components + case cost to you ?

Thanks for the great compliment =) Cost? I wasn't keeping track.. *cough*

Dark Prodigy...great looking job!

Thanks =)

Dark Prodigy what pump is that, an Eheim?

Nice rig you got, I think it may do very good in distriuted computing. :)

Click the link in my sig. :D

Thanks and of course I Fold =). See Below.

AquaComputer AquaStream, a variant of the 1046.

I wonder whats the manufacturer/model name of the CPU blocks he's using...

That is correct. See below.

They look an awful lot like the older XSPC CPU blocks (http://www.xspc.biz/x2ocpu.php) with the newer mounting brackets.

Hm.. close but not quite. Here they are..

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0009_4resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0021_3resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0020_3resize.jpg

deepsilver

07-26-2007, 01:31 PM

nice cooler's. :up:

BeeN

07-26-2007, 04:04 PM

These Flowblocks looks very cute :)

http://www.imagebanana.com/img/g13oyhd9/IMAG0002.jpg

rdmty

07-26-2007, 05:08 PM

These Flowblocks looks very cute :)

http://www.imagebanana.com/img/g13oyhd9/IMAG0002.jpg

that's a pretty cool effect where the orange and white meet :D

Grinch

07-26-2007, 06:25 PM

These Flowblocks looks very cute :)

http://www.imagebanana.com/img/g13oyhd9/IMAG0002.jpg

worthy of a beer:

http://s2.supload.com/thumbs/default/_MG_2158.jpg (http://s2.supload.com/free/_MG_2158.jpg/view/)
:up:

msgclb

07-27-2007, 12:19 AM

http://img529.imageshack.us/img529/1300/case11280ef6.th.jpg (http://img529.imageshack.us/my.php?image=case11280ef6.jpg)

BeeN

07-27-2007, 03:05 AM

Har Har i like it too :) But now i managet those cables for a better look. And grinch thanks for your ice cold beer i really enjoyed it :D My case getting dirty but i installed some Dust Guards in the bottom, maybe this should help.

http://benstyle.de/projekt/case1.JPG
http://benstyle.de/projekt/case2.JPG

hecktic

07-27-2007, 03:50 AM

worthy of a beer:

http://s2.supload.com/thumbs/default/_MG_2158.jpg (http://s2.supload.com/free/_MG_2158.jpg/view/)
:up:

:rofl: :ROTF: ... there you go again with the beer ...

That is correct. See below.

Hm.. close but not quite. Here they are..

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0009_4resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0021_3resize.jpg

http://i47.photobucket.com/albums/f164/DarkProdigy145/DSC_0020_3resize.jpg

Nice block, have you tried the chipset blocks XSPC makes?

Solarfall

07-27-2007, 03:56 AM

wow BeeN thats some awesome wire management.. :up:

ANP !!!

07-27-2007, 05:03 AM

Some pics of my final build :)

Loop order : EK Res 150 - MCP355 with Petra's top - EK-FC8800GTX - Thermochill PA120.3 - FuZion - MCW30 - Back to EK Res 150.

Looks great ? :)

Good work like always man :). Keep it coming :yepp:

Patriote

07-27-2007, 10:20 AM

Good work like always man :). Keep it coming :yepp:

Heh i knew you couldn't miss it :) Thanks a lot my friend!

ANP !!!

07-27-2007, 12:41 PM

Heh i knew you couldn't miss it :) Thanks a lot my friend!

Always there to adore ur work :yepp:

wish i can get my hands on a MM :rolleyes:

customss

07-27-2007, 09:57 PM

we just finished this one, QuietOnes 3000, 780 Gph, to see more pictures http://www.customsssolutions.com

SparkyJJO

07-27-2007, 10:15 PM

I like the green.

What pump and rad is in there?

customss

07-27-2007, 10:22 PM

Its a QuietOnes 3000, 1"NPT fittings 780gph 10.5 ft head, radiator has dual 120mm Coolermaster fans in custom stainless body http://www.customsssolutions.com to some better pictures of it

Prodigys

07-28-2007, 02:58 PM

Finally I´m done :D

http://www.abload.de/img/wak226f0z.jpg

OMG!

That's a very nice case ! Wich one is that ? I can nothing find off it... :shrug:

If you have a link to the manufacterer or something ?

Thnx !

marauder16

07-28-2007, 03:02 PM

OMG!

That's a very nice case ! Wich one is that ? I can nothing find off it... :shrug:

If you have a link to the manufacterer or something ?

Thnx !
lol, you must be the only person here that doesn't know this is a 'Silverstone TJ-07' ;)

Prodigys

07-28-2007, 03:05 PM

lol, you must be the only person here that doesn't know this is a 'Silverstone TJ-07' ;)

Sorry, just new @ XS, and you all got those nice big cases.
So I thought, just ask he ;) .

marauder16

07-28-2007, 03:39 PM

Sorry, just new @ XS, and you all got those nice big cases.
So I thought, just ask he ;) .
no need to say sorry dude, we were all new here once :)

justin_c

07-28-2007, 04:13 PM

steffan...OMG :p: the german rigs at effizienzgurus.de watercoolign section are just amazing; yours and xbox's.

killert

07-29-2007, 12:45 PM

http://www.xtremesystems.org/forums/attachment.php?attachmentid=62291&stc=1&d=1185738273

Origin_Unknown

07-29-2007, 01:09 PM

cable ties holding fans onto ram ftw!!

FlimFlam00

07-29-2007, 11:21 PM

There are so many sick rigs here, it is a wonderful and inspiring thread. Here is my hoopty rig.

Current config:

e6600 (soon to be q6600 G0)
p5n32-e
2 x 2gb Mushkin pc6400
Evga 8800 GTX
Netcell 3-port RAID card
Dvico HD TV tuner

150gb RaptorX (sys - Vista)
3 x 74 GB Raptors (apps - Netcell RAID)
Maxtor 200gb (Unbuntu + XP)
Seagate 250gb (PCLinuxOS)
WD 400gb (data)
Seagate 500gb (media)

Temjin tj07
Swiftech cp350
TDX (being replaced with an Apogee GTX)
Koolance vr block
Corsair nb
DD res
Swiftech dual 120mm 676 rad (old model but thin and has adjustable fittings)
Aqua computer single 120mm rad

and I think that's it. Here are some pics:

http://img.photobucket.com/albums/v486/kenergy/temjin/DSCN2171.jpg

http://img.photobucket.com/albums/v486/kenergy/temjin/DSCN2161.jpg

Can you find the iPhone in the picture? :-)
http://smg.photobucket.com/albums/v486/kenergy/temjin/DSCN2160.jpg

http://img.photobucket.com/albums/v486/kenergy/temjin/DSCN2155.jpg

http://img.photobucket.com/albums/v486/kenergy/temjin/DSCN2108.jpg

The whirlwind mess I make when building:
http://img.photobucket.com/albums/v486/kenergy/temjin/DSCN2147.jpg

It is not fully done yet. Obviously I have to change the cpu block to accommodate the q6600 thermals, and might play around with some rad/fan configs. Also, I have to mod the upper hd cage in the 5.25" bays, and mod the bay covers. I have painted covers but will probably end up using LL perforated covers. Additionally, I might change the stock top exhaust grill to an AC Ryan or Aqua computer one.

I had 4 rigs, but now only have 1 and 2 Macs to streamline my setups since I can only give all my systems so much time each. But there is a need to build a second rig, and I am getting new ideas and amassing extra parts so it is high time that I start building. I'll post it when I am done. Hope you guys like it.

SoulsCollective

07-29-2007, 11:24 PM

Are you sure you're hosting's good mate? Piccies aren't showing up for me...

FlimFlam00

07-29-2007, 11:31 PM

Yeah, my urls were jacked - fixed!

pie_uk

07-30-2007, 09:51 AM

wow nice temjin dude. did you get that powder coated?

FlimFlam00

07-30-2007, 11:26 AM

Thanks man. It is actually a paint job from Smooth Creations. I usually would think it would be blasphemous to paint brushed aluminum, but............

goatboy

07-30-2007, 07:26 PM

Thanks man. It is actually a paint job from Smooth Creations. I usually would think it would be blasphemous to paint brushed aluminum, but............

Nice color.

lowfat

07-30-2007, 08:01 PM

FlimFlam00, that looks awesome man. The paint colour is a great choice.

FlimFlam00

07-31-2007, 12:13 AM

Nice color.

FlimFlam00, that looks awesome man. The paint colour is a great choice.

Thanks guys. I assembled it pretty quick, but have to freaking take it apart again. ;-) Now I am wondering what I should do for my next rig? Trying to get a hold of a Soldam case.

Jedda

07-31-2007, 03:25 AM

Yeah, your paint work has soldam feel to it. I can understand you moving more in that direction.
Certainly a nice change from black on your silverstone. Looks luxurious.

Darkatom

07-31-2007, 06:26 PM

Quick question, do cold cathodes affect water temps inside a case ?

SoulsCollective

07-31-2007, 06:32 PM

Quick question, do cold cathodes affect water temps inside a case ?
It would depend on how close to the tubing the cathode was and what sort of cathode we're talking about here, but even in a worst-case scenario the increase would be a fraction of a degree.

This should really be in a new thread.

Marco André

07-31-2007, 06:58 PM

I love your case flimflam00 ;)

pranko1

08-01-2007, 03:40 AM

Very nice looking rig FlimFlam00:up:. Nice clean build.

ikeenen

08-01-2007, 02:10 PM

What for 2900Xt is that !

You have 3 heatpipes, I only got 2 of them....

And your card is running @ 830/850, mine is running @850/1000, so you can clock some harder :D

Nice WC sets btw, all of you !

it's a sapphire card. And now that it's on water it does 890/1050 @ 43c.

akajay

08-01-2007, 06:39 PM

here is mine

http://img227.imageshack.us/img227/8501/blackur7.jpg

dual 120's in a v1000

oh and if anyone is wondering that push button switch on the left is the reset switch since v1000's dont come with one.

Grinch

08-01-2007, 06:58 PM

akajay

08-01-2007, 07:26 PM

would look better without the blue smartcoils...but other than that..looks good..:up:

yeah i didnt want to use smartcoils but the tubing kinks easily even though its tygon.

DarkJedi

08-01-2007, 10:45 PM

Specs in the sig, but added the D-Tek block.

http://img101.imageshack.us/img101/1903/dsc02729lf0.jpg (http://imageshack.us)

TSXmike

08-02-2007, 03:35 AM

Specs in the sig, but added the D-Tek block.

http://img101.imageshack.us/img101/1903/dsc02729lf0.jpg (http://imageshack.us)

what fluid did you use? me likes!

Subsider

08-02-2007, 07:43 AM

what fluid did you use? me likes!

yes , do tell ! ive been looking for Red coolant that dosnt look pink

deepsilver

08-02-2007, 09:51 AM

Specs in the sig, but added the D-Tek block.

http://img101.imageshack.us/img101/1903/dsc02729lf0.jpg (http://imageshack.us)

bad calbe- and tubemanagement. :down:

Marco André

08-02-2007, 11:26 AM

bad calbe- and tubemanagement. :down:

Agree! But i like the liquid. Seems like blood :cool:

DarkJedi

08-02-2007, 12:00 PM

bad calbe- and tubemanagement. :down:
Meh, cable management aside...tell me how I can "improve" the tube management? This is my first build, so my apologies for "screwing up".

The "red" liquid is just distilled water with red food coloring added to it. I did add some of the "pink" anti-corosion liquid I got with the kit first.

Steffen

08-02-2007, 12:06 PM

http://www.abload.de/img/wak2272fc.jpg

http://www.abload.de/img/wak226f0z.jpg

http://www.abload.de/img/wak228fz.jpg

SparkyJJO

08-02-2007, 01:47 PM

Specs in the sig, but added the D-Tek block.

http://img101.imageshack.us/img101/1903/dsc02729lf0.jpg (http://imageshack.us)

Meh, cable management aside...tell me how I can "improve" the tube management? This is my first build, so my apologies for "screwing up".

The "red" liquid is just distilled water with red food coloring added to it. I did add some of the "pink" anti-corosion liquid I got with the kit first.

No need to apologize, first loop is usually a bit rougher than the next ones. My loop has some extra tubing in it as well, I'm just too lazy to clean it up :p:

Here is what I see that you can do:
1. Rotate your Fuzion so the logo is upright, then run to the rad. Cut the tubing shorter by a few inches, you could probably remove 3-5 inches from that run.
2. Shorten the tubing from the rad to the res. Don't do it too much so that it kinks but you could lose a couple inches from there.

That would neaten it up quite a bit :)

DarkJedi

08-02-2007, 02:22 PM

See, this is exactly what I need. Thank you Sparky :D I will work on that this weekend. So the D-Tek logo should be facing up towards the PSU? Also, what would be the best way to drain a system? As I'm sure I should so I don't screw anything up while remounting the block.

SparkyJJO

08-02-2007, 03:10 PM

NickS

08-02-2007, 03:27 PM

The Dtrk logo when upright is on the bottom of the block, so then the outlet is on the upper right. Basically turn the block a quarter turn to the right.

Not sure on how to drain the system, I haven't drained mine before lol

LOL it isn't fun let me tell you that. For darkjedi's setup I'd either pull the pump out from under the PCI cards and set it in a bowl if the tubes are long enough, and pull one. If that wont work, I'd set a bowl under the res and pull the bottom tube out.

Waterlogged

08-02-2007, 10:55 PM

DarkJedi, you could probably clean the loop up even further than stated by SparkyJJO. Here's what I would do on top of spinning the D-Tek, take the pump and stand it up under the res with inlet pointing towards back of case, have outlet go to rad, rad to Fuzion, Fuzion to GPU block, GPU block back to res.

As for draining, you can unbolt the res and undo the cap, turn it upside down into a bowl or something/somewhere else for reuse/disposal, and gently crack loose the top hose on the Fuzion to get a good flow going.

funkflix

08-03-2007, 03:39 AM

Nice system Steffen! :toast:

Finished my system last night -

http://www.abload.de/img/imgp2208vrg.jpg

:cool:

Greg_1

08-03-2007, 04:06 AM

damn, the foto is gr8 and the rig also

SparkyJJO

08-03-2007, 08:05 AM

funkflix what case is that? That thing is huge! Big enough you could have mounted the rad internally methinks ;)

Grinch

08-03-2007, 08:18 AM

:up: Nice system Steffen! :toast:

Finished my system last night -

http://www.abload.de/img/imgp2208vrg.jpg

:cool:

nice looking setup...:up:

funkflix what case is that? That thing is huge! Big enough you could have mounted the rad internally methinks ;)

oh yeah rad could have easily fit in top...:up:

Greg_1

08-03-2007, 09:57 AM

I love that OCZ RAM cooler in black :D

Patriote

08-03-2007, 12:08 PM

HEY GUYS! WE HAVE A KINK!

funkflix, is it just me or do i see a real bad kink that goes out of the SB then up in a res i suppose ?

stormshadow

08-03-2007, 12:13 PM

HEY GUYS! WE HAVE A KINK!

funkflix, is it just me or do i see a real bad kink that goes out of the SB then up in a res i suppose ?

i saw that too but i'm guessing it's just the way that shiny black tubing reflects.

with a case that big and tubing that small, you'd have to try REAL HARD to get a kink lol

Patriote

08-03-2007, 12:15 PM

i saw that too but i'm guessing it's just the way that shiny black tubing reflects.

with a case that big and tubing that small, you'd have to try REAL HARD to get a kink lol

Nah it really looks like a bad kink to me! :shrug:

Rob_B

08-03-2007, 12:20 PM

I zoomed in on that pic and it doesn't look like a kink to me.
But he could have routed that tubing a little nicer.
That 90deg elbow is pointed some what to the back of the case too.
So that tube is making an extra bend.

But all in all it looks great.:up:

stormshadow

08-03-2007, 12:21 PM

anyone know what kinda chipset blocks he's using?

SafeFire

08-03-2007, 12:49 PM

Beautiful build there funkflix, thats a work of art :up:

Though, I think I speak for a number of people when I say that a list of parts would be nice. I personally would be very interested in knowing what case that is (chieftec?) and what brand those waterblocks are of as I haven't seen that design around yet.

Rob_B

08-03-2007, 01:21 PM

The water blocks look like they are Mips. http://www.mips-computer.de/

I would like to know what case that is too.

deepsilver

08-03-2007, 01:35 PM

Nice system Steffen! :toast:

Finished my system last night -

http://www.abload.de/img/imgp2208vrg.jpg

:cool:

nice mesh. :up:
that black interior, the black tube and ramcooler look's great. :)

funkflix

08-03-2007, 01:37 PM

damn, the foto is gr8 and the rig also

Thx! :)

funkflix what case is that? That thing is huge! Big enough you could have mounted the rad internally methinks ;)

It is a Chieftec Mesh Big Tower, which i varnished with black paint.

:up:

nice looking setup...:up:

oh yeah rad could have easily fit in top...:up:

Thx!

I like the free room in the case, because i work a lot on my system! And sometimes i get called Mr. External.. :p: It is my passion to make the radiators external.

I love that OCZ RAM cooler in black :D

Me too! :D

HEY GUYS! WE HAVE A KINK!

funkflix, is it just me or do i see a real bad kink that goes out of the SB then up in a res i suppose ?

Thx for the warning, but as stormshadow already said, it is reflection.

http://www.gravedigga.de/gravedigga/PC1/5.jpg

I zoomed in on that pic and it doesn't look like a kink to me.
But he could have routed that tubing a little nicer.
That 90deg elbow is pointed some what to the back of the case too.
So that tube is making an extra bend.

But all in all it looks great.:up:

Thx!

Tubing is close to perfect imho, tried a lot of variations. :)

anyone know what kinda chipset blocks he's using?

Yes, they are from www.mips-computer.de.

Beautiful build there funkflix, thats a work of art :up:

Though, I think I speak for a number of people when I say that a list of parts would be nice. I personally would be very interested in knowing what case that is (chieftec?) and what brand those waterblocks are of as I haven't seen that design around yet.

Thx! :)

Northbridge --> MIPS Freezer

Southbridge --> MIPS Freezer

CPU --> Alphacool NexXxos XP

GFX --> D-Tek FuZion GFX

Mosfet --> Heattrap

:toast:

http://www.gravedigga.de/gravedigga/PC1/6.jpg

SaII

08-03-2007, 02:14 PM

http://www.gravedigga.de/gravedigga/PC1/6.jpg

woah man, that's like uber hardcore

btw please explain steps to paint that OCZ cooler black

Patriote

08-03-2007, 03:18 PM

Hell yeah, that look great! I like the Big brother :)

BTW: It still look a bit kinked?!

Patriote

08-03-2007, 04:17 PM

Some pics i just took :)

http://img179.imageshack.us/img179/5238/img3911ip3.jpg (http://imageshack.us)

http://img263.imageshack.us/img263/182/img3913wq1.jpg (http://imageshack.us)

Without Flash

http://img252.imageshack.us/img252/6997/img3936ms0.jpg (http://imageshack.us)

http://img401.imageshack.us/img401/6725/img3937pd4.jpg (http://imageshack.us)

http://img218.imageshack.us/img218/5231/img3929wv0.jpg (http://imageshack.us)

http://img519.imageshack.us/img519/8215/img3943sf7.jpg (http://imageshack.us)

http://img252.imageshack.us/img252/7885/img3916st3.jpg (http://imageshack.us)

http://img508.imageshack.us/img508/7779/img3983gk1.jpg (http://imageshack.us)

Playing with colors

http://img161.imageshack.us/img161/8153/img3926jo3.jpg (http://imageshack.us)

Night shot

http://img181.imageshack.us/img181/9245/363467004mn1.jpg (http://imageshack.us)

funkflix

08-03-2007, 04:26 PM

woah man, that's like uber hardcore

btw please explain steps to paint that OCZ cooler black

Buy some cans with black paint in it and just do it! :D

Hell yeah, that look great! I like the Big brother :)

BTW: It still look a bit kinked?!

It's hard to make good pictures with flash and few space, but i hope u will see now, that there is no kink! :p:

http://www.abload.de/img/imgp2236q7z.jpg

http://www.abload.de/img/imgp2239cd7.jpg

Nice system Patriote, it looks great, but i do not like the covers of the fans.

stormshadow

08-03-2007, 04:36 PM

nice rig patriote but you should do something about that kink.

lol.

Patriote

08-03-2007, 04:41 PM

Buy some cans with black paint in it and just do it! :D

It's hard to make good pictures with flash and few space, but i hope u will see now, that there is no kink! :p:

Nice system Patriote, it looks great, but i do not like the covers of the fans.

Ah now i see it :p:

BTW: I didn't liked them either when i got them back a few months. I got used to them now. But when i bought the case, i couldn't find any Stainless steel 120mm fan grills. Those are the only ones i had found. Now, Performance PCs has some killer looking ones from kikbox. I was totally drooling when i first saw them. Then, i saw the price... For 6 of them, (4 in front and 2 on top) it would of cost me over 150$ CAD ... Way too much for me since i had just left my job :yepp:

Patriote

08-03-2007, 04:42 PM

nice rig patriote but you should do something about that kink.

lol.

Kink ? I see no kinks lol Not in my computer! :rofl:

funkflix

08-03-2007, 04:45 PM

nice rig patriote but you should do something about that kink.

lol.

Kink ? I see no kinks lol Not in my computer! :rofl:

:p:

Lazy Dog

08-03-2007, 05:37 PM

http://www.abload.de/img/wak2272fc.jpg

http://www.abload.de/img/wak226f0z.jpg

http://www.abload.de/img/wak228fz.jpgBeautiful!!!:slobber:

May I ask where did you put the HDD cages?

filmbot

08-03-2007, 06:07 PM

http://www.abload.de/img/wak2272fc.jpg

Is there room for another 120x3 rad? And where is your PSU?

Walternowi

08-03-2007, 06:27 PM

Patriote,

That is an awesome looking MM :slobber:

Patriote

08-03-2007, 07:12 PM

Patriote,

That is an awesome looking MM :slobber:

Thanks :)

BTW: Thats a nice pussy :) I mean the cat in the avatar of course... :rofl:

Steffen

08-03-2007, 07:52 PM

Beautiful!!!:slobber:
May I ask where did you put the HDD cages?
The HDD´s are in the 5.25" Bay. Installed with a Noiseblocker X-Swing.
Is there room for another 120x3 rad? And where is your PSU?
No but a Dual should be possible. The PSU is behind the rad :)

The_Beast

08-03-2007, 08:56 PM

great looking system filmbot

lazy

08-03-2007, 10:10 PM

thats a nice looking set-up you have there steffen, i actually ordered that same case the other day. Its good to see what kind of options i have by looking @ your case

btw what kind of reservior is that?

rdmty

08-03-2007, 11:04 PM

Patriote

08-03-2007, 11:35 PM

Waterlogged

08-03-2007, 11:39 PM

More precisely, an EK 150 rev2.

filmbot

08-04-2007, 02:52 AM

great looking system filmbot

I wish that was my rig, its Steffen's. ;)

Stabbin

08-04-2007, 07:09 AM

Patriote, thats one dead sexy UFO you got there.:shocked: I think I'm in love.:up:

TheOriginalTB

08-04-2007, 08:08 AM

Can a newcomer also join the gallery ;)

A 120mm single cooltex mainstream Rev 2 in the back
http://psaforum.dk/imageupload/?rsz=1&id=403&db=.jpg (http://psaforum.dk/imageupload/?id=403)

A Thermaltake 120mm single rad in the front (soon to be another cooltek)
http://psaforum.dk/imageupload/?rsz=1&id=404&db=.jpg (http://psaforum.dk/imageupload/?id=404)

My OCZ FlexXLC ram :) 2x1GB
http://psaforum.dk/imageupload/?rsz=1&id=405&db=.jpg (http://psaforum.dk/imageupload/?id=405)

Hard-to-see, but it's a Thermaltake pump from a BigWater 745 MK II
http://psaforum.dk/imageupload/?rsz=1&id=406&db=.jpg (http://psaforum.dk/imageupload/?id=406)

A look inside..
http://psaforum.dk/imageupload/?rsz=1&id=407&db=.jpg (http://psaforum.dk/imageupload/?id=407)

Apogee GT, OCZ ram, 10/8mm hoses and FeserOne Black liquid
http://psaforum.dk/imageupload/?rsz=1&id=408&db=.jpg (http://psaforum.dk/imageupload/?id=408)

And a 250mm coolplex reservoir on the outside
http://psaforum.dk/imageupload/?rsz=1&id=409&db=.jpg (http://psaforum.dk/imageupload/?id=409)

All the fans and shrouds on the side - just need to close with the panel.
http://psaforum.dk/imageupload/?rsz=1&id=410&db=.jpg (http://psaforum.dk/imageupload/?id=410)

The Thermaltake radiator will be exchanged for a Coolplex or another coolplex will be added, haven't quite decided it yet. A Swiftech MXW30 has been ordered, and I'm on the lookout for a solution to my 7900GTX.

The hardware is:
Asus P5N-E SLI
Intel E6600 @ 3.5 (1750x8, 1.425V)
Asus Geforce 7900GTX (680/1880)
Soundblaster XiFi

The case is an LianLi PC101B.

If you have any comments or suggestions, please feel free to add them.

Dark Prodigy

08-04-2007, 10:08 AM

@ STEFFEN & PATRIOTE

Didn't you guys post your systems only a couple of pages back on page 181? Why did you need to repost your systems with no changes or updates?? :confused: At least Patriote took different pictures but Steffen just reposted. Just asking.

Lazy Dog

08-04-2007, 10:11 AM

cyberspyder

08-04-2007, 10:15 AM

Dark Prodigy

08-04-2007, 10:34 AM

I quoted Steffen's post :)

I'm not talking about your quote. I'm mentioning Steffens posts on page 181 & 184.

Patriote

08-04-2007, 11:44 AM

Patriote, thats one dead sexy UFO you got there.:shocked: I think I'm in love.:up:

Thanks :)

@ STEFFEN & PATRIOTE

Didn't you guys post your systems only a couple of pages back on page 181? Why did you need to repost your systems with no changes or updates?? :confused: At least Patriote took different pictures but Steffen just reposted. Just asking.

The pics i had took were not the final ones ;) If you take a look at both, i replaced some stuff that were wrong, did some new cable management etc... but yeah anyway, if you think it's too much U2-UFO for you're eyes, then don't look at them! Oh and i was using a cheaper cam for the old pics.

BTW: Not sure if it's you that goes from the name Dark Prodigy onto [H] Forums, but i like the rig you posted in there :up:

deepsilver

08-04-2007, 12:02 PM

Marco André

08-04-2007, 12:28 PM

Too many fans, i think :rolleyes:

Dark Prodigy

08-04-2007, 01:01 PM

Thanks :)

.... if you think it's too much U2-UFO for you're eyes, then don't look at them!

BTW: Not sure if it's you that goes from the name Dark Prodigy onto [H] Forums, but i like the rig you posted in there :up:

Its definately not a case of your U2-UFO being too much, it was simply inquiring why the repost when you posted your system already. Why not just edit your previous post with the new pics? :shrug:

And yes I am the very same Dark Prodigy, however, I posted the same pics on the same page as the first pics of your system you posted on pg.181...Guess they got lost in all the reposts...:rolleyes:

Thanks for the compliment though =)

deepsilver

08-04-2007, 01:08 PM

Too many fans, i think :rolleyes:

but it look's awesome. :p:

Waterlogged

08-04-2007, 01:28 PM

http://img161.imageshack.us/img161/8153/img3926jo3.jpg

Patriote, something about white lights and clear water is super clean looking to me. The rig looks really good the way you have it now but white & clear is super HAWT.

v0dka

08-04-2007, 02:27 PM

Patriote, an awesome job you did there. Really good cable management also. :up:

Marco André

08-04-2007, 02:29 PM

I like the case! Too many fans is the only negative point ;)

Patriote

08-04-2007, 03:00 PM

Its definately not a case of your U2-UFO being too much, it was simply inquiring why the repost when you posted your system already. Why not just edit your previous post with the new pics? :shrug:

And yes I am the very same Dark Prodigy, however, I posted the same pics on the same page as the first pics of your system you posted on pg.181...Guess they got lost in all the reposts...:rolleyes:

Thanks for the compliment though =)

Well, why would i edit a post that nobody would see anymore ? I mean, i post pics so that ppls can see and maybe that will give them ideas for future builds!

BTW: Ah so thats why that particular rig reminded me of something! I had seen it somewhere but couldn't pin-point out where.

____________________________________

I actually hate white lights and clean water ;) My water needs to be colored or else ill think nothing is running through my tubing lol

But guys, all the fans are actually all Yate loons silent fans! Only the 3 pull fans on my rad are Scythes. And you guys see 2 custom fan controllers in front ? Well, i have full control over all the fans in my case. And let me tell you that when all are turned down, the case is super silent!

The cable management turned out to be not bad :)

Thanks for the kind words guys :)

K_O

08-05-2007, 02:16 PM

Zostava:
CPU~ ~ ~ ~ ~Intel C2D E6300@ 3003MHz (7x429MHz) 1,41Vcore
MB~ ~ ~ ~ ~ Gigabyte P965-DQ6 bios F9
RAM~ ~ ~ ~ ~4x1GB Corsair Dominator TWIN2X 6400D4C@ 858MHz 5 5 5 15 2T 2,22V
GK~ ~ ~ ~ ~ eVga 8800GTS320MB @ 621MHz/1900MHz
ZDROJ~ ~ ~ ~Enermax Liberty ET500W fan @5V
HDD~ ~ ~ ~ ~Seagate Baracuda 7200.10 320GB
DVD~ ~ ~ ~ ~Pioneer DVR212 sata
DVD~ ~ ~ ~ ~Samsung SH183 sata
:CASE~ ~ ~ ~ Thermaltake Armor Jr. VC3000SNA intake fan Thermaltake Sleeve Bearing Fun 120 and outake fan Noctua NF-S12-1200 @5V

Chladenie:
Pumpa~ ~ ~ ~Swiftek MCP655B whitout speed controler
CPU~ ~ ~ ~ ~Swiftek Apogee GTX
SB~ ~ ~ ~ ~ ~Swifkek MCW30
NB~ ~ ~ ~ ~ ~Swiftek MCW30
GPU~ ~ ~ ~ ~ D-Tek FuZion GFX
Hadice~ ~ ~ ~Tygon R3603 1/2ID 3/4OD
Fitings~ ~ ~ ~ DangerDen HighFlow Fitings 1/2OD 3/8ID
Radiators~ ~ ~2 x Swiftek MCR320 whit 6 x Artic Cooling Fan AF120@7V
Expa~ ~ ~ ~ ~Cape Colpex Pro 250mm

Temperatur (27°C in room):
CPU: IDLE 27°C BURN 48°C(max po 30hod ORTHOSU)
GPU: IDLE 39°C BURN 43°C(max po 5hod 3Dmark06)
Chipset: IDLE 27°C BURN 45°C(max po 30hod ORTHOSU)

http://img182.imageshack.us/img182/552/19an7.jpg

http://img211.imageshack.us/img211/1467/p7061514mc8.jpg

http://img73.imageshack.us/img73/277/p7061511am6.jpg

http://img73.imageshack.us/img73/593/p7061496ix9.jpg

http://img176.imageshack.us/img176/842/13kompletmz5.jpg

http://img123.imageshack.us/img123/3097/14kompletnf0.jpg

http://img504.imageshack.us/img504/97/23uc0.jpg

perfection

08-05-2007, 02:30 PM

have you got any ramsinks on that 8800GTS of yours?? you should also put ramsinks on that mofsets of yours too

K_O

08-05-2007, 02:32 PM

have you got any ramsinks on that 8800GTS of yours?? you should also put ramsinks on that mofsets of yours too

no i cant have it

trouble2000

08-05-2007, 04:18 PM

My new rig :) My daughter aproves it :up:

Patriote

08-05-2007, 04:41 PM

Not a big fan of small tubing but damn... That looks great trouble2000! I like the cable management as well! Oh and cute lil girl you have there :)

Oh and can you say "Fingerprints mess?" lol :D

ForeverAgain

08-05-2007, 09:38 PM

http://img211.imageshack.us/img211/1467/p7061514mc8.jpg

Quick ? about your rez, what is that tube that you have inside of it?

YugenM

08-05-2007, 10:19 PM

Quick ? about your rez, what is that tube that you have inside of it?

I believe it's standard with the Alphacool Cape Coolplex reservoirs, it's an acrylic tube that prevents air bubbles from immediately getting sucked back in.

burton

08-05-2007, 10:31 PM

very nice

K_O

08-05-2007, 11:25 PM

yes. its cape colpex

trouble2000

08-06-2007, 01:43 AM

Not a big fan of small tubing but damn... That looks great trouble2000! I like the cable management as well! Oh and cute lil girl you have there :)

Oh and can you say "Fingerprints mess?" lol :D

Tks! I just need something too cool the ram down now and i'll replace my psu fan because the current fan is wayyyy too noisy.

Patriote

08-06-2007, 02:25 AM

Tks! I just need something too cool the ram down now and i'll replace my psu fan because the current fan is wayyyy too noisy.

Yeah mine is noisy as hell too! It's the noisiest thing in my case ATM. And i have about 14 fans in my case :p:

Marco André

08-06-2007, 05:51 AM

14fans? Thats a WR! :D

kinghong1970

08-06-2007, 07:30 AM

My new rig :) My daughter aproves it :up:

Question for ya...

is that a single loop of 3 radiators and 1 pump?

120 Rad @ front of case -> CPU -> 120 Rad @ bk of case -> NB -> 220 Rad @ top of case -> Graphics -> Pump ?

trouble2000

08-06-2007, 08:35 AM

Question for ya...

is that a single loop of 3 radiators and 1 pump?

120 Rad @ front of case -> CPU -> 120 Rad @ bk of case -> NB -> 220 Rad @ top of case -> Graphics -> Pump ?

That's correct. Am i doing anything wrong? The pump is a laing LAING 12V DDC-1T.

nitteo

08-06-2007, 09:04 AM

http://i6.photobucket.com/albums/y218/gw4k/5-1.jpg

http://i6.photobucket.com/albums/y218/gw4k/3-3.jpg

http://i6.photobucket.com/albums/y218/gw4k/1-3.jpg

pranko1

08-06-2007, 10:42 AM

Thats a sweet looking case nitteo:up:

[XC]Atomicpineapple

08-06-2007, 03:04 PM

My new rig :) My daughter aproves it :up:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=62545&stc=1&d=1186355892

That is awesome! Might have to shamelessly copy that in the V1200B I've got on order.

Waterlogged

08-06-2007, 11:06 PM

With only 1 DDC and 3 rads (1 a GTS), that's got to be restrictive as all hell. Making matters worse is the AGB res on the DDC.

[XC]Atomicpineapple

08-06-2007, 11:17 PM

Well true, if you're refering to me copying the design I should have explained better. I'll be copying the overall look, loop layout will have to be different due to my hardware (see sig for a general idea). Trouble2000, do you have the sizes you cut the black acrylic down to still handy? If possible could you PM them to me?

trouble2000

08-07-2007, 02:22 AM

With only 1 DDC and 3 rads (1 a GTS), that's got to be restrictive as all hell. Making matters worse is the AGB res on the DDC.

What do you mean by restrictive? I think the flow is alright, quite fast i think.

Atomicpineapple;2355418']Well true, if you're refering to me copying the design I should have explained better. I'll be copying the overall look, loop layout will have to be different due to my hardware (see sig for a general idea). Trouble2000, do you have the sizes you cut the black acrylic down to still handy? If possible could you PM them to me?

As soon as i get home i'll pm you.

Chri$ch

08-07-2007, 03:47 AM

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/01.jpg

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/03.jpg

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/04.jpg

Grinch

08-07-2007, 04:56 AM

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/01.jpg

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/03.jpg

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/04.jpg

nice looking setup...:up:

deepsilver

08-07-2007, 05:10 AM

http://i6.photobucket.com/albums/y218/gw4k/5-1.jpg

http://i6.photobucket.com/albums/y218/gw4k/3-3.jpg

http://i6.photobucket.com/albums/y218/gw4k/1-3.jpg

the lace don't fit in the case. :(

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/01.jpg

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/03.jpg

http://www.muenster.de/~e30pics/Bilder/Computer/PC-767/04.jpg

very clean system. :up:

tiro_uspsss

08-07-2007, 07:27 AM

lace? what lace?

nitteo

08-07-2007, 07:31 AM

lace? what lace?

What Lace? Lace?

tiro_uspsss

08-07-2007, 07:34 AM

What Lace? Lace?

:rofl: now i'm confused - r u quoting me cause ur asking me or cause ur 'with me', asking deepsilver what lace? :confused: :rofl:

pie_uk

08-07-2007, 08:10 AM

patriote change that urine looking color green to blue will look much much better :)

SoulsCollective

08-07-2007, 08:21 AM

lace? what lace?
What Lace? Lace?
I think he means the perforated sheet metal.

tiro_uspsss

08-07-2007, 08:26 AM

I think he means the perforated sheet metal.

what perforated sheet metal? the one in front of the 2 front fans? how does that not fit? or does he mean 'suit' ? oi deepsilver! please explain! :D

nitteo

08-07-2007, 08:52 AM

:rofl: now i'm confused - r u quoting me cause ur asking me or cause ur 'with me', asking deepsilver what lace? :confused: :rofl:

I am with you dude. The question still stands deepsilver:

WHAT LACE? :confused:

Edit: You guys mean fan guards on my rad?

tiro_uspsss

08-07-2007, 08:56 AM

I am with you dude. The question still stands deepsilver:

WHAT LACE? :confused:

Edit: You guys mean fan guards on my rad?

na.. something with case... he's obviously German, so am i.. just trying to think - maybe he's translated some word wrong.. my brain aint working tho - i cant figure out which word for what :p:

nitteo

08-07-2007, 09:00 AM

Thats a sweet looking case nitteo:up:

Thanks dude! It was "fun" trying to fit EVERYTHING inside that case. :ROTF:

Edit: @ tiro_uspsss: cool dude. I got family in Berlin.

funkflix

08-07-2007, 09:02 AM

*tryingtothinktypicalgerman* :p:

Imho he mean the cable fixers around the tubing, or the tubing himself..

tiro_uspsss

08-07-2007, 09:05 AM

*tryingtothinktypicalgerman* :p:

Imho he mean the cable fixers around the tubing, or the tubing himself..

they are called cable ties :p: :D

nitteo

08-07-2007, 09:05 AM

*tryingtothinktypicalgerman* :p:

Imho he mean the cable fixers around the tubing, or the tubing himself..

:shrug: The white zip ties dont fit the look of the case?

tiro_uspsss

08-07-2007, 09:07 AM

:shrug: The white zip ties dont fit the look of the case?

thats what he could mean actually.. in which case i would actually agree - mayb try some black ones...

funkflix

08-07-2007, 09:09 AM

they are called cable ties :p: :D

http://dict.tu-chemnitz.de/dings.cgi?lang=de&service=deen&opterrors=0&optpro=0&query=kabelbinder&iservice=&comment=

:slapass: @ dictionary.. :p:

nitteo

08-07-2007, 09:14 AM

thats what he could mean actually.. in which case i would actually agree - mayb try some black ones...

I guess I could, at least for the front "T" that is exposed in the window.

tiro_uspsss

08-07-2007, 09:15 AM

http://dict.tu-chemnitz.de/dings.cgi?lang=de&service=deen&opterrors=0&optpro=0&query=kabelbinder&iservice=&comment=

:slapass: @ dictionary.. :p:

:rofl: ahhh, the delights of an international forum with a diverse mix of culture & language

translated into any language: a breeding ground for confusion! :p: :D :ROTF: :up:

tiro_uspsss

08-07-2007, 09:18 AM

I guess I could, at least for the front "T" that is exposed in the window.

yeah.. in the open case pics the white ties do stand out a bit. but its not as bad in night pic with case light... maybe u can find some red ones, or paint the white ones red.. experiment - u might find something that hits a spot with u!

edit: hang on a tick, r u using them to clamp the tubes to the fittings? not interested in these?:

http://www.petrastechshop.com/ststwohoclwb.html

i reckon these might give ur set-up a 'industrial-heavyduty' look to it :D.. dunno, just an idea :up:

deepsilver

08-07-2007, 09:22 AM

i took simply the first word from the dictionary and “lace” was the first. :owned:

tiro_uspsss

08-07-2007, 09:23 AM

i took simply the first word from the dictionary and “lace” was the first. :owned:

:ROTF: :ROTF: :ROTF:

:p:

deepsilver

08-07-2007, 09:27 AM

that is only the german way of thinking. :yepp:

nitteo

08-07-2007, 09:30 AM

yeah.. in the open case pics the white ties do stand out a bit. but its not as bad in night pic with case light... maybe u can find some red ones, or paint the white ones red.. experiment - u might find something that hits a spot with u!

edit: hang on a tick, r u using them to clamp the tubes to the fittings? not interested in these?:

http://www.petrastechshop.com/ststwohoclwb.html

i reckon these might give ur set-up a 'industrial-heavyduty' look to it :D.. dunno, just an idea :up:

Yeah I dont like how that looks. I will just change the "T" cable ties to black. :up:

that is only the german way of thinking. :yepp:

Its cool, we figured it out anyway! :up:

tiro_uspsss

08-07-2007, 09:32 AM

Yeah I dont like how that looks. I will just change the "T" cable ties to black. :up:

oh ok, cool, each to their own. yeah, not everyones cup of tea, thought i might suggest anyway hehe :up:

Waterlogged

08-07-2007, 10:49 AM

With only 1 DDC and 3 rads (1 a GTS), that's got to be restrictive as all hell. Making matters worse is the AGB res on the DDC.

What do you mean by restrictive? I think the flow is alright, quite fast i think.

The flow may look OK with the small round interior of the res but I wouldn't be the least bit surprised if it was under 200 LPH. I sure hope that's a 18W pump, otherwise, your probably under 150 LPH.

The AGB res has been shown to hurt flow as shown in this topic here (http://www.xtremesystems.org/forums/showthread.php?t=111796). The BI GTS is also known to hurt flow, mixed with 2 other rads (which are basically 4 90° elbows with thin tubing between them) as well as the blocks and you have a low flow/low pressure system. I recommend you add another pump of the same wattage and remove the AGB and add a Swiftech micro res (<-preferred recommendation) or lose at least one of the rads (preferably the GTS) and shorten the loop a little.

IMO, the best setup would be a single rad using either a TC PA120.3 or a Swifty MCR320 up top, but I'm not suggesting either of those because I know LL's aren't cheap and I'd hate to see it cut up any further, as it may look fugly if you do.

The Nemesis

08-07-2007, 12:38 PM

http://i203.photobucket.com/albums/aa311/thenemesis2/Poseidon/DSC_000300011.jpg

http://i203.photobucket.com/albums/aa311/thenemesis2/Poseidon/DSC_000500031.jpg

Q6600 G0
DFI 680iLT
2 X BFG 8800TX SLI
OCZ DDR2 PC2-8000 Titanium Alpha VX2
Creative Sound Blaster Live Platnium
OCZ ProXStream 1000w
Tagan /\ Plus Black Pearl
Apogee GT, MCW30, MCP355 w/Petra'sTech DDCT-01s Top,
Thermochill PA120.2