Waterblock problems

[technochris1]

I have the Soyo Kt-400 Ultra platinum edition, and i have a problem when connecting my Rbx Waterblock to my Mother board.

If u have the fan and stock heatsink on the Mobo, the Board boots fine.

so i try to dissconect the heatsink from the mobo (while its off), and leave the Fan cable connected to the mobo and i try to boot up and all of a sudden a loud siren goes off. haha, i dont know whats wrong. so i connected the Mobo to the water cooling loop and it dose the same. can someone help me out....

[pippin88]

So that fan is still plugged into the same plug?
Put the heatsink back on, and go into BIOS. There should be an option concerning no boot on lack of CPU fan or heatsink or similar.

[technochris1]

nope that didnt work.

[technochris1]

nope that didnt work.

[technochris1]

I fixed it..

[John Cena]

Originally posted by technochris1


so i try to dissconect the heatsink from the mobo (while its off), and leave the Fan cable connected to the mobo and i try to boot up and all of a sudden a loud siren goes off. haha, i dont know whats wrong. [/B]

That's your Motherboard warning you that your cpu temperature is high Because you have NO HEATSINK connected to the cpu slot but you have the cpu fan cable connected which is on top of the Heatsink.

Anyways, how did you solve the problem?

[pippin88]

He said that he tried it with watercooling installed and it did the same thing. Not sure what his problem was, but I'm also interested.