fxr91
04-28-2004, 09:19 PM
Just to let those of you who own a Vapochill LightSpeed know (in case you didn't), asetek have released V1.1 of the CC panel for them.
Changelog:
---> Windows(R) software <---
[x] 2.1) Bug removed causing "Run-time error '9'" when device is not detected.
[x] 2.2) Bug removed causing "Run-time error '432' - File name or class name not found during Automation operation" when software is opened.
[x] 2.3) Bug removed causing a difference between evaporator temperatures depending on whether software was running or not.
[x] 2.4) Code changed to improve reaction times when other USB devices are connected to the system.
[x] 2.5) Code changed to obtain CPU speed through two different sources during timer update in case first attempt fails.
[x] 2.6) Code changed to save "Display view".
[x] 2.7) Code changed to display default settings 1st time the program is started.
[x] 2.8) Code changed to update texts on both "Status Area" tab and "ChillControl Control" tab when "Accept Changes" under the "Appearance" tab is pressed.
[x] 2.9) Added logging functionality by including log files.
[x] 2.10) Added "Accept" / "Cancel" / "Default" buttons when updating settings under the tab "ChillControl Config". This should give a more stabil and reliable update of values.
[x] 2.11) Added selection of multiple user configurations. Replaces the selection of "Max. performance" and "User performance".
[x] 2.12) Added pop-up box if device gets disconnected.
[x] 2.13) Added scroll routine for displaying text strings longer than 20 characters. This automatically applies to user strings longer than 20 characters.
[x] 2.14) INF-file has been changed for a better description of the USB device.
---> Known or reported issues <---
[ ] 3.1) Check for new software version is not implemented.
[ ] 3.2) If shut-down occurs unintendedly the USB device may not be found by Windows. Either roll-back or update the driver for the device in the Control Panel if this happens. The device will be installed as a Human Interface Device (HID).
Download (http://www.asetek.com/DownloadArea/Software/CCUSB111_040427.zip) :)
Changelog:
---> Windows(R) software <---
[x] 2.1) Bug removed causing "Run-time error '9'" when device is not detected.
[x] 2.2) Bug removed causing "Run-time error '432' - File name or class name not found during Automation operation" when software is opened.
[x] 2.3) Bug removed causing a difference between evaporator temperatures depending on whether software was running or not.
[x] 2.4) Code changed to improve reaction times when other USB devices are connected to the system.
[x] 2.5) Code changed to obtain CPU speed through two different sources during timer update in case first attempt fails.
[x] 2.6) Code changed to save "Display view".
[x] 2.7) Code changed to display default settings 1st time the program is started.
[x] 2.8) Code changed to update texts on both "Status Area" tab and "ChillControl Control" tab when "Accept Changes" under the "Appearance" tab is pressed.
[x] 2.9) Added logging functionality by including log files.
[x] 2.10) Added "Accept" / "Cancel" / "Default" buttons when updating settings under the tab "ChillControl Config". This should give a more stabil and reliable update of values.
[x] 2.11) Added selection of multiple user configurations. Replaces the selection of "Max. performance" and "User performance".
[x] 2.12) Added pop-up box if device gets disconnected.
[x] 2.13) Added scroll routine for displaying text strings longer than 20 characters. This automatically applies to user strings longer than 20 characters.
[x] 2.14) INF-file has been changed for a better description of the USB device.
---> Known or reported issues <---
[ ] 3.1) Check for new software version is not implemented.
[ ] 3.2) If shut-down occurs unintendedly the USB device may not be found by Windows. Either roll-back or update the driver for the device in the Control Panel if this happens. The device will be installed as a Human Interface Device (HID).
Download (http://www.asetek.com/DownloadArea/Software/CCUSB111_040427.zip) :)