2.4C, OCZ PC4200EL at 316FSB, 1:1..

[nutcase]

I know the timings are Awful but who cares at this FSB...

Asus P4C800-E Deluxe Vdimm Mod only
P4 2.4C @ 316 FSB
OCZ 2x256Mb PC4200 EL DDR at 3-4-4-8 and 3.28V
Water Chilled...

[nutcase]

and here is the Timings list:

[XtremepH]

Nice results. what temps are you getting on that 2.4c water chilled?

[nutcase]

Originally posted by XtremepH
Nice results. what temps are you getting on that 2.4c water chilled?

Water is running at 8C and cpu temp is about 10C at Idle..

[oc-rookie]

Nice!! How's SP and hexus?

[OPPAINTER]

hag6br,

Thats good stuff.

When you say "waterchilled" are you talking about the memory being cooled?

OPP

[nutcase]

Originally posted by OPPAINTER
hag6br,

Thats good stuff.

When you say "waterchilled" are you talking about the memory being cooled?

OPP

Nope.. Just the Cpu.. Also A BIG Fan blowing into the Case :D

The Chiller is a Via Aqua Polar Bear Chiller...

[DaveX]

Holy sh*t, that has got to be one of the highest 1:1 oc's I've ever seen. If you have BH-5 could you possibly do some 5:4 benches with it and see how it compares to this 1:1 oc? It would be interesting to see how much the P4 platform really benefits from raw bandwidth...

[nutcase]

Originally posted by DaveX
Holy sh*t, that has got to be one of the highest 1:1 oc's I've ever seen. If you have BH-5 could you possibly do some 5:4 benches with it and see how it compares to this 1:1 oc? It would be interesting to see how much the P4 platform really benefits from raw bandwidth...

I Don't have any Decent BH-5 to use, But My OCZ PC3200 Plat LE (BH-6) will do 254 1:1 @ 2-2-2-5 settings and the same Voltage..

Also, at 5:4, it hit the same FSB...

316 FSB is about the Max the Cpu will do, So both may go even Higher...

[nutcase]

Originally posted by oc-rookie
Nice!! How's SP and hexus?

I will later, Got to run and take care of some stuff..

[kromosto]

forget about the timings fsb and ddr is superb :toast:

[DaveX]

Originally posted by hag6br
I Don't have any Decent BH-5 to use, But My OCZ PC3200 Plat LE (BH-6) will do 254 1:1 @ 2-2-2-5 settings and the same Voltage..

Also, at 5:4, it hit the same FSB...

316 FSB is about the Max the Cpu will do, So both may go even Higher...

Benchies...please? :D

[nutcase]

Originally posted by DaveX
Benchies...please? :D

OK.. Here is the OCZ PC3200 Plat LE At 5:4, 2-2-2-5 timings.. Slightly higher FSB...

[Spec3]

Run it unbuffered :D

[hallowen]

NICE OC! hag6br...

Mine did 3600 0n my P4C800D, but I Couldn't get past 300fsb with a 9800XT.

What kind of Video card are you using?

[ryanpgroovy]

Excelent overclock ,

:toast: :toast: :toast:

[andyddr]

Very nice overclocks there! Mine are lower on A-Data PC4000 but my timings are slightly better.

[Tony]

Originally posted by andyddr
Very nice overclocks there! Mine are lower on A-Data PC4000 but my timings are slightly better.

Lets see 2xadata on a P4c800E running the same timings you are...I have run OCZ4400beta at 3-4-3-8 on A64 with one module at 280+ with ease...

dual channel is hard on dimms....

[andyddr]

Just showing what I got.

[ryanpgroovy]

andyddr your running single channel ?

[andyddr]

Yeah it`s on an AMD A64 board. Can run two sticks together @ 288FSB but that`s not in Dual Channel mode. Must also say that this is only @ 2.9v

[andyddr]

Here`s another shot of the mem at 3-4-4-7 at 315FSB (also 2.9v)

[Tony]

A64 boards clock the ram easier than i875....

Lets see some dual channel action

[andyddr]

Okay bigtoe you win. Your mem is better than mine.

[andyOCZ]

Bigtoe as an "IN" with a certain memory company!!

[andyddr]

Yip looks like it. And @ half the price I`d also be a bit worried about A-Data. But still OCZ is some of the best mem in the world let`s face it. I for one would rather be showing off some shinny OCZ than A-Data in my system. PM me and I`ll send you my address you can ship to as a beta tester for you guys hehe.

[ryanpgroovy]

I did not notice you were using a Athlon 64 board


Thats damned good , how do you get pass the pci lock problems ?

[andyddr]

Not fully convinced that PCI is locked on the K8NPRO. Using ClockGen I`ve hit 325FSB by divinding the mem and lowering HTT. I`ll do s creenshot a bit later for u all.

[ryanpgroovy]

groovy man

[andyddr]

So you going to send me OCZ mem now or what :rocker:

[nutcase]

Originally posted by hallowen
NICE OC! hag6br...

Mine did 3600 0n my P4C800D, but I Couldn't get past 300fsb with a 9800XT.

What kind of Video card are you using?

I was running a 9800XT and had the same problem getting it stable over 300 FSB...

I threw in a 9000 Pro I had, and it took off...

[nutcase]

Ok, Here is the SuperPi and Pifast Benchies. It was Barely stable enough to run these... ;)

[nutcase]

And MrSpec, Here is the Unbuffered benchmark.. Thought it would be higher than this :(

[nutcase]

Originally posted by andyddr
Very nice overclocks there! Mine are lower on A-Data PC4000 but my timings are slightly better.

It looks Good.. I just noticed though in your Sig.. That is the Same stepping A64 as Mine :cool:

It is a Great Overclocker....

[andyddr]

hag6br what speeds are you getting out of yours? Right now I`m at 2.5G but only with a TT Venus 12 air cooler.

[cpulloverclock]

Originally posted by hag6br
And MrSpec, Here is the Unbuffered benchmark.. Thought it would be higher than this :( I get 3780/3815 at 330/264 in dual channel (asynch mode)
weird score at 316 1:1 :confused:

[Spec3]

Were you using 512MB dimms? That would account for the lost BW

[macci]

Thats damned good , how do you get pass the pci lock problems ?
What PCI lock problems?? :D
A64 3Dbench @ 361FSB (http://www.akiba-pc.com/e107_images/articles/a64_3000/24920_air_361fsb.gif)

[Bennah]

I have yet to get memory for my A64 so which should I get? PC3200 and go for tight timmings low fsb or high fsb with some PC4200?

Is the K8N-Pro easy to work with, when going for high FSB?

Thanks

[andyddr]

Nice one Macci. 10 steps ahead of everyone else as usual :up:
What timings you running LDT at?

[macci]

2x mode for LDT

[andyddr]

722 HTT. That`s pretty good stuff. Have you added any voltage to LDT? I`ve found that adding v makes the system unstable (freeze).

[macci]

LDT voltage is at the max the BIOS allows.

[nutcase]

Originally posted by andyddr
hag6br what speeds are you getting out of yours? Right now I`m at 2.5G but only with a TT Venus 12 air cooler.

I was able to get to 2750 Mhz with the A64 with my OCZ PC3200 and 5:4.. Also cooled with my Mach I..

I have not yet played with the Multipliers yet to see how high I can get the FSB...

[ricjax99]

Originally posted by andyddr
Okay bigtoe you win. Your mem is better than mine.

lmao that made me chuckle :ROTF:

bigtoe was rather defensive. :D

Some serious clocks in here :toast:

[andyddr]

That`s a pretty decent overclock hag6br :)

Yip looks like I stood on bigtoes`s....errr toe hehe.

Now I hope Baker will answer my emails so I can get a block. Mailed him a few times but no answer from Xtwerkz.

[Tony]

http://homepage.ntlworld.com/ad.leach/tony1.JPG

Me defensive...never ....LOL

EB at 255fsb 2.8V.CPU at 328fsb

[nutcase]

I forgot, Here is my Benchies on the A64 :

http://www.xtremesystems.org/forums/showthread.php?postid=407968#post407968

And Mr. Spec, Those are 256MB dimms, That was Why I was disappointed in the Unbuffered scores.. About the same as I get with My OCZ PC3200 at 5:4 at about same FSB... :confused:

[althes]

very nice