Mobile Barton 2600+ is pretty darn good....

[Mrstickinit]

Just got my new Mobile 2600+ yesterday. This screenie is the first bench I've run with it. Seems to be a great overclocker..... Sorry, but I forgot the stepping. I'll post it tomorrow because I need to take off my waterblock to check the contact.

Mobile Barton 2600+ @ 2505Mhz 200x12.5 (on water)
A7N8X Deluxe 2.0
512Mb Corsair TwinX PC3200 @ 11-2-2-2
Temps accordinng to MBM were around 120f but the air in the room was rather warm.
1.7 vcore

[bias_hjorth]

looking sweet ... now crank up the baby and give it some vcore :)

[Mrstickinit]

Originally posted by bias_hjorth
looking sweet ... now crank up the baby and give it some vcore :)

Definately.... need to get the ambient in the room down some before my next run. I'm hoping that I can push 2700Mhz before I have to go to chilled water but we'll see.

Not bad for a $100 CPU eh???

[jfr0]

Yeah pretty nice cpu's I got mine to 2.95 gigs with prommie

[Geforce4ti4200]

2.5GHz on water is ok but not great at all. on air would be quite good

[Jrocket]

Some guys have gotten 2.6ghz on air!

[texuspete00]

Originally posted by Geforce4ti4200
2.5GHz on water is ok but not great at all. on air would be quite good

Probably preliminary results there oh master of the obvious. What's enticing is the 1.7vcore. Don't you think he could pull that on air? I look into my crystal ball and predict..... 2.65~2.7GHz+. ;)

[twilius_basic]

Originally posted by texuspete2k2
Probably preliminary results there oh master of the obvious. What's enticing is the 1.7vcore. Don't you think he could pull that on air? I look into my crystal ball and predict..... 2.65~2.7GHz+. ;)

I should hope so ;) My M2500+ does 3Dmark at 2.7ghz w/ 1.875v + SLK-947U on me NF7.

Need more vcore! :toast:

[EnJoY]

Where'd you buy it from?

[twilius_basic]

Originally posted by EnJoY
Where'd you buy it from?

Were you talking to me? If so, newegg ;) If not, my bad :) .....

[Jupiler]

Very nice oc, certainly with only 1.7V.
I'm sure there's room for more.
2.7 Ghz might be possbile, good luck anyway.

[DaveX]

Is this without any sort of burn-in? Even if it was with burn-in, very impressive that it only needs 1.7V :cool:

[vlad]

Sounds like a good chip to me. i got a 2400 mobile from Newegg and so far its done 2650mhz@1.775v chilled. You gotta love these mobiles. Good luck with it.:thumbsup:

[Endre]

Originally posted by Jrocket
Some guys have gotten 2.6ghz on air!
Alot of guys actually (gotta love these CPUs :D ). My chip does 2,7+ stable with air. 2600 stable with less than 1,7v (2400 35w "Y" IQYFA 0345SPMW).

[Confused_User]

What stepping is your chip Mrstickinit?

[blinky]

crank those volts up
:)

[EnJoY]

Originally posted by twilius_basic
Were you talking to me? If so, newegg ;) If not, my bad :) .....

:) No, I was actually talking to Mrstickinit. But thanks anyway. ;)

[Mrstickinit]

Originally posted by Confused_User
What stepping is your chip Mrstickinit?

Dunno yet man. Havn't taken off my block since last night, (or fired up the machine since then either). I work from midnight till 8am so have been sleeping all day today. Will get the stepping for you later tonight.

For those who want to know, I bought the chip from Monarch Computers here in Atlanta.

[Mrstickinit]

Originally posted by Confused_User
What stepping is your chip Mrstickinit?

AQYHA

[spaceman]

Originally posted by Mrstickinit
AQYHA Congrats, Mrstickinit. :) My 2500+ I got today is also an AQYHA, 0410 TPCW, and I got 2607MHz. on air, but needed 1.9 vcore to get it. :eek: I slowed it down to 11x220 for awhile, cause I'm still getting used to this Abit AN7. I didn't bother with that micro guru, I've heard it's too glitchy, but the board itself seems fine. :cool: BTW, I got 2607 using 13x200. Ain't it great to have multipliers? :D ;)

[vlad]

Originally posted by Mrstickinit
have been sleeping all day today.
Wow you still sleep?:hehe:

[blinky]

Originally posted by vlad
Wow you still sleep?:hehe: sleeping is soooo passe

[BuickBeast]

what's the stepping?