Hynix BT-J Chips 300 fsb capable

[bwan]

SC @ 3.2v
AI7 @ 2.4C

not near any stable as the cpu chips was holding me back.

DC @ 3.5v (http://forum.lowyat.net/index.php?showtopic=37253)

[F|apDro|`]

wowwwwwwww

nice result :slobber:

[blinky]

what memory comes with these chips may i ask

[lalPOOO]

Kingston pc2700 :p:

Very nice results though. Is it stable at that speed with the voltage, or are you just taking shots?

[bwan]

Originally posted by blinky
what memory comes with these chips may i ask

I got 4 sticks of this chips and all of them capable of doing 300 fsb @ 3.3v SC.
1. 2 X 256MB Hyundai PC2700
2. 2 X 512MB Kingston Value RAM PC2700

It wasn't stable at 300 fsb @ 3.2v. The stable was 280 fsb. At 300 fsb, I need 3.5GHz to get it stable at SC but can't get it stable on DC.

[IvanAndreevich]

What about dual channel?

[bwan]

DC needs 3.5v at 300 fsb but it's not stable. Check the link on my first post for DC. Can't do that with 2 X 512MB though.

[blinky]

dam, and u can get 256 of pc2700 from kingston's site for $30, i might have to check some of this stuff out

have you tried going low with the latencies at high volts and low speed (200-240mhz) and seeing what they can do

[Geforce4ti4200]

wow pc2700 doing 300fsb? this is insanely high! alot like the 200-220fsb a few champ pc2100 chips did! how high can you do at like 2.5-3-3-7?

[bwan]

Originally posted by Geforce4ti4200
wow pc2700 doing 300fsb? this is insanely high! alot like the 200-220fsb a few champ pc2100 chips did! how high can you do at like 2.5-3-3-7?

2.5-4-4-7 @ DC @ 3.5v
2.5-3-3-7 ~ 285 fsb

[Soulburner]

2.5-3-3-7 @ 285 1:1 may be good enough to match some BH-5 at 5:4 2-2-2-5 I think...not sure though.

That is awesome for some cheap 2700!

[bwan]

Originally posted by Soulburner
2.5-3-3-7 @ 285 1:1 may be good enough to match some BH-5 at 5:4 2-2-2-5 I think...not sure though.

That is awesome for some cheap 2700!

A bit warm weather so I can't get 2.5-3-3-7 today but 2.5-4-4-7 at 285 fsb 1:1. Here's the comparison:

2 x 256MB Hynix BT-J PC2700 2.5-4-4-7 @ 285 fsb 1:1
Sandra Unbuffered ~ 3115/3116
Sandra Buffered ~ 6207/6209

2 X 256MB Kingston Value RAM PC2700 2-2-2-5 @ 285 fsb @ 5:4
Sandra Unbuffered ~ 3006/3081
Sandra Buffered ~ 6112/6101

Low numbers on BH-6 chips (you may call it cheaps too) due to PAT disabled on my AI7. I can only enable PAT at 280 fsb @ 5:4 and 250 fsb @ 1:1:)

[Soulburner]

Don't compare using Sandra....test them in 3DMark01, that is usually the best indicator...

At those settings you just posted, the BH-5 IS faster even though the bandwidth shows lower.

[Geforce4ti4200]

is it true that 5:4 of 300fsb with bh5 at 240MHz 2-2-2-5 is just as fast as 1:1 at 3-4-4-8? still nice for ram costing half of what bh5 does! I had bh5 but sold it when my corsair value did just as good, both did 220fsb at 2-2-3-11 anyway(the mushkin 2-2-2-11 but its only worth 100 marks more) and I paid $70 for corsair value

[Soulburner]

Originally posted by Geforce4ti4200
is it true that 5:4 of 300fsb with bh5 at 240MHz 2-2-2-5 is just as fast as 1:1 at 3-4-4-8?
No, the BH-5 is quite a bit faster at those settings.

[althes]

Nice scores, i have some kingston value 3200 wont do much at all.

[JWB]

BWAN where did you get them from?

[tictac]

bwan nice to see u here too... hehehe

Nice record

Congrats :thumbsup:

[tictac]

its Hynix BT-J chip u can get it on some KVR 333

my fren have 1 stick here on his GA7VA tho'... :(

[JWB]

Ok thanks tictac, Will have a look for some now. lol took me a min to figure out what KVR meant lol:rolleyes:

[bwan]

Thanks. I've been around since last year but only registered last month. It took almost a month before my membership validated.
Credit to Admin.bwan nice to see u here too... hehehe