Whats yer fastest Speed at 1.65 or lower?

[quicksilver98]

BARTONS OR TBREDS EITHER! Post Screenies to count!

[r3b0rN]

hrmmm seeing as u started the thread and all, maybe u should give us ur best results? id have some results for u if it wasnt so damned hot in australia.

[Shade00]

Do you want Tbreds, or just Bartons?

[r3b0rN]

hrmm yeah he didnt really specify, maybe just all athlons...

[Evil_Spork]

no screenshot but i could get 2350mhz @ 1.65v on my 1700 DLT, sold it to a friend,.

[paul007]

heres a 2ghz 2500+ at 1.25v

http://www.xtremesystems.org/forums/showthread.php?s=&threadid=16848&highlight=1.25v

[r3b0rN]

whoa, thats freaky, very nice! i have a feeling i raise voltage to high...

[Perc]

i got a barton regular one 2500+ that will run 2400mhz at defualt v-core (1.65v). i have a screenie around here somewheres???

peace, perc

[STEvil]

2300 @ 1.65 with my 2000+ and 8rda+ that lets the voltage hang out all over.

[r3b0rN]

bwahaha not 1 screeny yet, cracks me up :p:

[STEvil]

How about a 2210mhz @ 1.55v?

Doing screenie shot now.. and its gonna reboot me probably so wait a few mins after this post I guess..

[STEvil]

Best it will do now is 2260 @ 1.65... go figure :rolleyes:

Oh well, running 2200 @ 1.6 (default volts) for now

[r3b0rN]

Athlon XP 2800+ Barton, Cooled by Tt Extreme Volcano 12, 45c idle (damn u australia :p: )

EDIT: yes i know its at 1.680v but i set it to 1.650v in bios, theres nothing i can do.

[texuspete00]

Well, my barton 2500+ need a small boost for 3200+. About 2.16Ghz at 1.65v. :( Ah well, mobile on the way. Its not too bad, fsb and volt friendly. I get by.

[saaya]

my duron does 2.2ghz with 1.5v

[mongoled]

I got a brand new 2600+ priming at 2446mhz @ 1.6volts as we speak!

This is on a soltek DRV5(KT333) chipset. Afraid im running out of mem options on this mobo. Vmem maxes out at 2.77volts, and dividers are gonna start taking there toll.

Currently at 196x12.5, gonna keep pushing. 2.5-2-2-5

mong out

-EDIT-

This is also on an old thermal glaciatorII running with a 80mm whinny fan!!

:eek:

[ricjax99]

^ :slobber:

[mongoled]

Update on this badboy,

Now running 12.5x200 @ 1.625 bios (1.648 windows), prime95 has made it onto the 4th test! Have started getting screen corruption, if only this mthbrd had a 1/6 divider!

Vdimm dosnt seem to be limiting me at 200mhz, not yet anyway. Ive switched out my 9800 and put in a geforce4MX, gonna push a bit more.

-ScreenFlash-

Made it onto test5!!!

:)

Time to reboot and pump up the mhz. Current temp with diode next to CPU is 51.3 Celcius.

-EDIT-

Anything over 201mhz in bios is a no go, it just boot up and drop the speed to 1666mhz. The highest i can now get into windows is 201x12.5 which gives me 2524mhz. Does anybody know a wiremod trick for this mobo? Or an app I can use to upp fsb from windows. Remember tis a KT333 chipset.

[mare87]

Lets see some pics! This is a Mobile 2600+?

[mongoled]

Ok I will upload some pics, gonna have to install software first, my mthbrd died last night so im working on another system for the time being. I gather u want picture of CPU-Z and the chip itself?

-EDIT-

http://homepage.ntlworld.com/dresuk03/cpu-z_2526mhz.gif

http://homepage.ntlworld.com/dresuk03/xp2600+.gif

[Walrusbonzo]

Damn, I need a camera stand, that photo of the CPU is much better than my blurry mess on Guru Review :D

What r your load CPU temps like according to the mobo? 2.5GHz at 1.65v is VERY impressive. I'm needing to set the BIOS to 1.8v VCore to get 2.5GHz stable on my Mobile 2500+, load temps of 42~44C.

[mongoled]

Well I decided to scan the chip instead, the original image size was 102MB!!

:eek:

Till the 5th test in prime95 the load recorded from a probe next to the CPU was abt 51C. But this is on very average air cooling, I must stress this fact.

Cant wait for my new Infinity, then i can strap on my waterblocks and really see what this chip has in her.

I have another chip, exactly the same stepping but seems very average compared to this one. The only diff is the uber chip has got code, Y911792A40359 and the average chip (which is in the pic above) has got code Y911792A40525.

Comparing....

Uber chip: Y911792A40359
Aver chip: Y911792A40525

Only difference is the last 3 digits. I havnt totally made my mind out the average chip yet, gonna wait till i get them both into my Infinity, then I will run some real tests.

mong

[saaya]

its pure luck... i dont think stepping or batch number means anything at all...

[STEvil]

04 chips seem to be doing well.