Amd Fsb Ranking

[ricjax99]

Originally posted by bachus_anonym
i know, i know... :D i run my benches with winxp down to max 61MB after 3dmark01 loads-up... there's still few services i could kill, though.
killing explorer is a lot easier than u think... but it's kind of hard to take any screenshots then :) but doable...

not done the screenie yet im on msn helping someone out, but btw my explorer process doesnt get killed, it never loads in 2K period ;)

[Spec3]

Has anyone gotten 4500MB/s in Sandra yet?

[SAE]

Originally posted by Spec3
Has anyone gotten 4500MB/s in Sandra yet?

Yeah. Many P4 users and some A64 owner :D ;)


What's worth it??? You can't even get 270 really 3dmark-stable at room temp. So it's of no practical use :confused:

[r3b0rN]

who said anything about practical :D

[SAE]

Originally posted by r3b0rN
who said anything about practical :D

Hehe :D

For me it has to be 3d stable at least... :thumbsup:

[bachus_anonym]

here we go again :D

[tictac]

another issue is

Command Per Clock : Disable

[tictac]

rank update

[SAE]

Hey tictac :) Where's my 262 fsb :D???

[coop]

http://service.futuremark.com/compare?2k1=7759430

[Conflict]

211mhz with a A7N8X-X is actually on there...i have gotten 215 with mine!!!!!!!

single channel with a no name brand of pc3200

[SAE]

Originally posted by Conflict
211mhz with a A7N8X-X is actually on there...i have gotten 215 with mine!!!!!!!

single channel with a no name brand of pc3200

3dmark link??? :D

[Conflict]

thats just it though...i did it using clockgen one night when Kunaak was helping me break 15,000 with my Ti4200...only registered as standard 200 in the orb

[r3b0rN]

u have SAE's barton oc for the a64 user's 3dmark compare... :D

[coop]

I have a question, if I turn apic off wil I need to reinstall OS, just because of that, (not counting the possibility of subsequent corruption)? Is anything required, i.e., clear cmos or reset config. data?

[ricjax99]

http://service.futuremark.com/compare?2k1=7704451

250 fsb, stock R350 :)

[SAE]

Originally posted by coop
I have a question, if I turn apic off wil I need to reinstall OS, just because of that, (not counting the possibility of subsequent corruption)? Is anything required, i.e., clear cmos or reset config. data?

First uninstall apic (acpi-uniproc-pc) in windows control panel/device manager... Turn it into Standard Pc or ACPI-PC... then quit windows and turn it off in bios. Restart windows and it should work if it did not corrupt anything ;) :D

[coop]

thanks, I have different ram and cpu I'm working with/broiling, and may want to do a backup first.

[SAE]

Originally posted by coop
thanks, I have different ram and cpu I'm working with/broiling, and may want to do a backup first.

Yeah. It's definately a good start :D

Back it all up. You could end up with an unusable windows due to hal.dll not being installed right...

[Fewture]

3D 2K1 @ 260MHz

http://service.futuremark.com/compare?2k1=7539080

DFI Infinity
BH-5 @ 3.78V

[SAE]

Originally posted by Fewture
3D 2K1 @ 260MHz

http://service.futuremark.com/compare?2k1=7539080

DFI Infinity
BH-5 @ 3.78V

Why did you hit your ram with such voltage-tortures ;) ?

Nice though :thumbsup:

Here's one at 2499 = 263x9,5 APIC on, cpc and all other stuff enabled :cool:

http://service.futuremark.com/compare?2k1=7787974

[Kameleon]

http://service.futuremark.com/compare?2k1=7785836

253x10, everything on. Need more vDIMM or vDD before I get any higher, 255 is max Superpi FSB

[SAE]

Originally posted by Kameleon
http://service.futuremark.com/compare?2k1=7785836

253x10, everything on. Need more vDIMM or vDD before I get any higher, 255 is max Superpi FSB

Vdimm maybe, but vdd does nothing :(

Makes it even more unstable. Dunno why, I did the mod as described and know it's working.

[Kameleon]

Originally posted by SAE
Vdimm maybe, but vdd does nothing :(

Makes it even more unstable. Dunno why, I did the mod as described and know it's working.

Is that even with vdd set to 1.9v or lower? I might not bother in that case, I'm pretty sure it's the vDIMM rather than the vDD holding me back - these DFI NBs are wicked :D

[SAE]

Originally posted by Kameleon
Is that even with vdd set to 1.9v or lower? I might not bother in that case, I'm pretty sure it's the vDIMM rather than the vDD holding me back - these DFI NBs are wicked :D

Yeah. I set vdd at 1,9V in bios and adjusted the mod... finally to 2.2V. But it did not do it. I always had the impression those standard 1.9V are not enough but the mod did not help at all :(

And setting the max to around 2V at 1.9V did not help either.

[Kameleon]

Originally posted by SAE
Yeah. I set vdd at 1,9V in bios and adjusted the mod... finally to 2.2V. But it did not do it. I always had the impression those standard 1.9V are not enough but the mod did not help at all :(

And setting the max to around 2V at 1.9V did not help either.

That's kinda annoying, especially as the VDD mod is very near one of the mosfets that I'll be covering with a rather large heatsink, so I'd have to decide whether to do the mod or not before I sinked the board fully.

Thanks a lot for the info, I might see if the IC's legs are large enough that I can do the mod with microclips...

[SAE]

Originally posted by Kameleon
That's kinda annoying, especially as the VDD mod is very near one of the mosfets that I'll be covering with a rather large heatsink, so I'd have to decide whether to do the mod or not before I sinked the board fully.

Thanks a lot for the info, I might see if the IC's legs are large enough that I can do the mod with microclips...

I use microclips :D

[Kameleon]

Oh, and something I may as well ask while you're around...;)

Originally posted by SAE
I can do a 3dmark at 265MHz APIC on but I use clockgen to get it after booting at 262... it's the max you can get into windows.

Do you mean it's the most you can get into windows with, or that there's some limit for everyone? I've never heard of such a thing...:confused:

[Spec3]

Originally posted by SAE
Yeah. Many P4 users and some A64 owner :D ;)


What's worth it??? You can't even get 270 really 3dmark-stable at room temp. So it's of no practical use :confused:

ROFL :banana:

But has anyone done it with an AXP setup?

[SAE]

Originally posted by Spec3
ROFL :banana:

But has anyone done it with an AXP setup?

Incase there is indeed anyone, this anyone is Lastviking ;)

[$SOLID$ Necro]

Hello all, 1st post here, a few of my friends at PimpRig told me about your site, and have been surfing the Forums here for a bit, and stumbled on this thread...

So far Ive been able to benchmark and ORB a run at 262 BIOS, single channel, CPC off and APIC enabled.

DFI LAN PARTY Rev B
XP2500+ Mobile
GEIL PC4000 256MB
ANTEC TRUE CONTROL 550 WATT P/S
ATI 9600XT (Stock Settings)

Here is a link for my run at @264
http://service.futuremark.com/compare?2k1=7805108




http://forums.pimprig.com/attachment.php?attachmentid=11660



I have also made a succesfull run at 266, but I can't ORB it, I lose my internet connection. I have been throught the forums looking for a fix, but nothing I have tried has worked yet.
I have disabled the onboard LAN and added a NIC card, that wasn't any help.

The board is stock for now, better NB and SB cooling are probably the only cure for it (Ordering a Micro Cool NB cooling kit tommorow)

I am also about to get a newer hard Drive, is a Raptor a good choice for high FSB, or would I be better off with an old style IDE drive?
I am sure one is better than the other when it comes to OS corruption issues, but I have not come across it in any threads yet.

Anyways..You guys have some wicked hardware here, and awesome Forums!

[Fewture]

Originally posted by SAE
Why did you hit your ram with such voltage-tortures ;) ?

Nice though :thumbsup:

Here's one at 2499 = 263x9,5 APIC on, cpc and all other stuff enabled :cool:

http://service.futuremark.com/compare?2k1=7787974
Because I like it!! :banana:

You should know better SAE ;)

Why am I not in the list? I have posted 260+ sandra and 260 3D :(

[SAE]

Originally posted by Fewture
Because I like it!! :banana:

You should know better SAE ;)

Why am I not in the list? I have posted 260+ sandra and 260 3D :(

Yeah. I know ;) But 3,78V!?!? For only 260? :eek:

[YoupY]

I love listings,

please note this :D

K7 AMD Dual Channel
http://members.home.nl/youpy/mem10t.jpg
A7N8X mobo
3.6 Vddr
2.5 Vdd :( needed for 250+

A64
http://members.home.nl/youpy/htt.jpg
Gigabyte K8N Pro mobo

[magma]

My Abit AN7 in DC -->

[khellandros66]

Dang Necro looks like 300MHz FSB isn't too far away!!! :banana:

What kind of cooling is that on h2o or phase change?

~Bob

[enigma]

Can run mine @257 with cpc on @ 2-2-2-11 @3.3v.
And this is with mushie level 1 3500 which is CH-5
Oh this is dual channel with apic on

[SAE]

Originally posted by enigma
Can run mine @257 with cpc on @ 2-2-2-11 @3.3v.
And this is with mushie level 1 3500 which is CH-5
Oh this is dual channel with apic on

Nice CH-5 there :thumbsup:

But you at least have to post a 3dmark2k1 link to become member of the list...

[yotomeczek]

Originally posted by yotomeczek
Another score from POLAND :D
245fsb 6-2-2-2 SINGLE
Mem - TwinMos CH-5 :D
http://service.futuremark.com/compare?2k1=7741673

Still ignored .... :mad:

[SAE]

Originally posted by yotomeczek
Still ignored .... :mad:

Yeah. Tictac hasn't been here for at least 2 weeks :(

My 263 one dc, cpc on, apic on (bh-5) is not up there, too...

[Fewture]

Originally posted by SAE
Yeah. I know ;) But 3,78V!?!? For only 260? :eek:

To get it 3D stable yes.. :rolleyes:

[AndreAPL]

my NF7 stock, with titan coolin in NB...
http://tirado.do.sapo.pt/fsb4.JPG
http://tirado.do.sapo.pt/fsb5.JPG
in DualChannel, muskin pc3200 lev2 powa.... and barton 2.5+

[tictac]

anybody here got mbot script....

HELP me update the ranking :P

[ipin]

Hi
I want to add my result to the list.
2X256Mb OCZ PC4200 (8-4-4-3-3), Abit NF7S ver 2.0, AMD Barton 2500+
Achieved FSB is 265MHz on dual channel.