P4 3.2c at 4.0hz w/pics

[warlock]

o.k

P4 3.2c

:D
i overclock my rig to:4.01hz / the info is fron Pc Wizard 2004
-----------------------------------
IC7-MAX3(Intel i875P-ICH5)
Version : 1.0
vcore 1.75v/ vdimm 2.9v
pci bus locked 66/33
the Vapochill pe is running at full load, all setting, but heater load is at 85%
-----------------------------------
NorthBridge Information :
Architecture : Hub
Manufacturer : Intel
Revision : A2
PAT : Enabled
Front Side Bus Speed : 250.6 MHz
Bus Speed : 1002.5 MHz (QDR)
Memory Bus Speed : 250.6 MHz
-----------------------------------------------------
Chipset Information :
Type : DDR-SDRAM PC4000
Frequency : 251 MHz
FSB/DRAM Multiplier : 1/1x
Channels : Dual
ECC Diagnostic : No
CAS Latency (tCL) : 3 clocks
RAS to CAS (tRCD) : 4 clocks
RAS Precharge (tRP) : 4 clocks
Cycle Time (tRAS) : 7 clocks
-----------------------------------------------------
General Information :
Real Frequency : 4009.9 MHz
Multiplier : 16x
Low/High Multiplier : 16x / 16x
Overclock Locked : Yes

Front Side Bus Information :
Front Side Bus Speed : 250.6 MHz
Bus Speed : 1002.5 MHz (QDR)

Initial Frequencies :
Frequency : 3200 MHz
Front Side Bus Speed : 200 MHz

Processor Performance Information :
Throttle Mode AC : None
Throttle Mode DC : Adaptive
Current Configuration : None
Throttle : 4009 MHz
-----------------------------------------------------
i bootup with no problems.:banana:

so people what do i need do next, about testing the rig..
its stable at this time...:rolleyes:
cpu temp is -2c and holding:cool:

[Karnivore]

Don't you already have one almost identical thread on this?

[Slay3r]

Yeah he does lol, also i dont see your oc pics :p:

[Techmasta]

There's two other threads that are almost identical to this one.

:spam: