My 9800 Pro VGPU/VDD

[TyphooN]

I have the Dynatron 1U Heatsink, and bga ramsinks. I am using 1.8VGPU and 3.6VDD. I get 443/383 no artifacts using atitool, i flashed my card to Gigacube XT E-Die Bios. Are my voltages safe? i could run the card even higher on both, but on a vmod site it said these were safe. I was just wondering what you guys think.

[Bra!nFreeZe^]

Hmmm you ought to have a higher core frequenzy! my old 9500@9700 did 450 mhz core @ 1.725 vgpu...so I dont think that it is your voltages that is your problem!

[TyphooN]

i was just wondering if the voltages were safe, why would i not be getting a higher core then?

[Bra!nFreeZe^]

I think the voltages are safe....btw you could always touch the back of the card to see if its steaming hot !
btw 443mhz core...is that you absolute max ? or havent you pushed it further ? what was your clocks before you vmodded the card ?

[TyphooN]

its not steaming hot, i tried pushing it further it artifacts, before the mod i got 420/357.

[TyphooN]

do u think its safe to go up voltages on the gpu or ram? maybe i should try the vref/vddq?

[Bra!nFreeZe^]

hmmm try it an remember to monitor your temperatures all the time and dont up the voltages to quickly! :)

[TyphooN]

heh, i dont really know how i can monitor my temps, i do have a sensor that came with my case but its under my cpu im not taking it off lol.

[TyphooN]

i just used these voltages because the site i did the mods from said these were safe voltages for air/ramsinks.. sure i should go up? my ram reallly doesnt get that hot, i had it running 3.8 on accident and put it back down lol.

[TyphooN]

i just dont want my card to suddenly die on me you know =/