View Full Version : Overclocking a P-4 3.0Ghz
apoc1
02-20-2004, 06:37 AM
How do you overclock this processor? what should I do to increase the FSB? How fast can I overclock this processor with it being stable?
saaya
02-20-2004, 06:48 AM
what cooling?
apoc1
02-20-2004, 06:50 AM
I will be using a Vaporphase refrigerant system -50C to -80C
bias_hjorth
02-20-2004, 06:51 AM
let me get this straight..
you´re having an extreme cooling system and dont know how to overclock?
My advise is that you should start out ocing with the stock fan :)
apoc1
02-20-2004, 06:54 AM
Yes I do have an extreme colling system, but I dont know much about overclocking right now.
bias_hjorth
02-20-2004, 06:57 AM
I assume its a cascade.. got any pics
apoc1
02-20-2004, 06:59 AM
No. its a single stage 1/2 hp r404 system calibrated at 170W load at -68C full load.
bias_hjorth
02-20-2004, 07:25 AM
very nice..
Allthough I recommend that you´ll try with the stock cooler first. Try dl. clockgen (www.clockgen.com) and oc only the fsb in that on stock voltage. Keeps going until it reboots.. Then increase the voltage within the bios with tiny steps and then continue ocing. Keep going within that circle until you´v reached the max of the stock.. Try keep the mem low as possible to determine max clock of the CPU..
When you got a hunch about max slap on the 1/2 hp and oc without limits (allmost :D )
good luck m8.
hmm, I think u should just stick the r404 cooler on, make sure ur protected against condensation, and see how high on stock volst, then raise it to the max safe vcore(not sure what it is), and then see how how:D
sure u dont wanna sell that cooler to me? :P