chilly1
01-22-2004, 07:52 PM
http://www.blairwing.com/images/P1010052.jpg
The condenser is 3000 btu when used with a stock 1550 rpm 6 inch fan blade and 150cfm, a 12v muffin fan with speed control Would be a better choice. The dimentions are 6.5 by 8 inches, captube 12 ft 0.026, Hose is a 3/8 ID Refrigeration hose rated for 850 psi working and 2000 psi burst, simmilar as that on an auto and has a 45 on one end and 1/2 inch flare fittings on the end, Filter dryer is a 1/4 inch bullet dryer with 1.5 cuin of dessicant in it.The 90 is 1/2 inch with 3/8 pipe on the other end that has a 3/8 ID suitable for brazing on a 3/8 pipe..with a hole in it for a captube.. the schrade is a 1/4 inch ID for brazing on a 1/4 inch pipe.. This is all you need ecept the compressor fan and control
you want this pm me or go herehttp://www.caseparts.com
The condenser is 3000 btu when used with a stock 1550 rpm 6 inch fan blade and 150cfm, a 12v muffin fan with speed control Would be a better choice. The dimentions are 6.5 by 8 inches, captube 12 ft 0.026, Hose is a 3/8 ID Refrigeration hose rated for 850 psi working and 2000 psi burst, simmilar as that on an auto and has a 45 on one end and 1/2 inch flare fittings on the end, Filter dryer is a 1/4 inch bullet dryer with 1.5 cuin of dessicant in it.The 90 is 1/2 inch with 3/8 pipe on the other end that has a 3/8 ID suitable for brazing on a 3/8 pipe..with a hole in it for a captube.. the schrade is a 1/4 inch ID for brazing on a 1/4 inch pipe.. This is all you need ecept the compressor fan and control
you want this pm me or go herehttp://www.caseparts.com