View Full Version : How t voltmod Manli radeon 9600non pro
Djmetal
12-31-2003, 02:44 AM
Hi to everybody.I want to ask for some help.I bought Manli radeon 9600non pro but I can overclock it only from 320/400 to 380/500.Then I checked up the voltages and I found that the gpu is only at 1.2V :mad: .I was surching how to voltmod my memory and gpu but I found no information for 9600nonpro series :( .Please help me.
Djmetal
01-01-2004, 06:42 AM
And also my video bios is locked and have some problems clocking.Where i can find unlocked bios for my video card.
Grace
01-01-2004, 02:17 PM
1.2VGpu is pretty normal for a 9600. It's a 0.13m card anyway.
The volt mod *I THINK* is the same with the 9600Pro series, you'll find plenty of guides for those around. Have a look and observe if the chips are the same. They are on my friends that I modded but that was a Sapphire, I'm not 100% sure if Manli will be the same.
Djmetal
01-02-2004, 03:19 AM
They look the same.My chips are IS26522CB and 35D3HKM
Ïî-äîáðå ñå ð:banana:ç÷åòè â ð:banana:çäåë:banana: "Xtreme V-Mods" ç:banana: ð:banana:ç:banana:è Vmod-îâå ç:banana: 9600/Pro.... ò:banana:ì ìèñëÿ èì:banana:ø ïîâå÷å ø:banana::banana:ñ....
Ïúê è òóê:banana: :banana::banana: âúïðîñè, :banana::banana: êîèòî å îòãîâ:banana:ðÿ:banana:î 100-öè ïúòè :banana:èêîé :banana:ÿì:banana: ä:banana: ñå õâ:banana::banana:å ä:banana: òè îáÿñ:banana:ÿâ:banana: îò:banana:îâî...
Djmetal
01-02-2004, 07:29 AM
Îêè ò:banana:ì ùå ïîñò:banana::banana: :banana:ì:banana::banana: âå÷å ñ òèÿ :banana:åÿñ:banana:îñòè äîðè :banana:å ñúì ñèãóðå:banana: ÷å ê:banana:ðò:banana:ò:banana: ìè å ì:banana::banana:ëè :banana:èêúäå ñ:banana:èìêè èç :banana:åò:banana: :banana:ÿì:banana:.Âèäÿõ ñ:banana:ìî åä:banana::banana: êîÿòî áåøå ÷èñòî :banana:òè ñúñ ñúùèÿ ð:banana:äè:banana:òîð :banana:ì:banana: áåøå çåëå:banana::banana: ñ 256 :banana: ìîéò:banana: å ÷åðâå:banana::banana:.Ùå ïîñò:banana::banana: è ò:banana:ì è ä:banana::banana:î :banana:å ìè ñå ê:banana:ð:banana:ò,÷å ïèø:banana: åä:banana:è è ñúùè ð:banana:áîòè.
Djmetal
01-03-2004, 02:10 AM
Grace I found that the back side of my card is the same with Sapphire 9600 256 mb non pro but different from any 9600pro.You said that you had been modded such a card for your friend could you give me some pictures.
Grace
01-03-2004, 02:14 AM
I don't have a digital camera, neither the card at the moment.
Also don't mind the layout, check the chip numbers. They should be the same with the pro card versions although located elsewhere. The regulator chips on the Sapphire was.
I'll see what I can do though.
Djmetal
01-03-2004, 02:56 AM
These are mine
First is 14 pin chip
ISL6522CB
P323AH8
Second is 16 pin chip
35D3HKM
CBT3257
The chips on my card are different from any 9600pro.The chips on 9600pro series have more pins and differen marks.
Grace
01-03-2004, 03:09 AM
Now I'm confused...
The Intersil ISL6522CB is a 14 pin controller, not 7!
And there should be 3 control chips, not 2...
Any pictures of it, please?
Djmetal
01-03-2004, 03:48 AM
Sory for the pins I fixed them.I had no digital camera and can`t post any pics.On this page you can look at the back side of Sapphire9600 non pro.The back side of my card is the same but I found no information abut moding of the regulators.Sapphire (http://www.unoid.net/9600pro/cards.html)
I find two voltages on my video card.1.2V This should be for the radeon9600 chip.And 3.36V this should be for the memory.
Grace
01-03-2004, 04:08 AM
I'm not 100% sure since my memory simply s%$s, but the Pin 5 of the ISL6522CB to ground (pin 7 is ground) should be the first mod. But wait until someone else verifies this also, I simply can't remember clearly.
However 3.36v are a lot for memory and I don't recognize/remember the rest of the controllers for sure. For the Vmem mod, wait for someone better than I am with a multimeter to verify it.
Djmetal
01-03-2004, 04:17 AM
But you are only one who is trying to help me.Will you give me cleary picture where is the exactly place of pin 5 and the pin 7.
Grace
01-03-2004, 04:26 AM
Well, I said that I don't have either the card or any camera...
There will be more people to help, they just didn't see the thread yet. Hopefully.
There should be a dot or cut where pin 1 is. Counting straight up this line should be up to pin 7. Pin 5 is obviously the 5th pin of the row.
I'll try to find a picture of the chip from a datasheet or something, but I can't now since I'm at work, you'll have to wait for a few...hours.
Djmetal
01-03-2004, 04:38 AM
Ok I will wait.And thank you for all the information you are given to me.
Grace
01-04-2004, 01:39 PM
The following picture is the ISL6522CB as you see it from top.
Pin 5 to GRD should be the first mod but I'm NOT SURE of this. You better wait for someone to verify that as well.
Slickthellama
01-04-2004, 02:04 PM
Originally posted by Djmetal
Îêè ò:banana:ì ùå ïîñò:banana::banana: :banana:ì:banana::banana: âå÷å ñ òèÿ :banana:åÿñ:banana:îñòè äîðè :banana:å ñúì ñèãóðå:banana: ÷å ê:banana:ðò:banana:ò:banana: ìè å ì:banana::banana:ëè :banana:èêúäå ñ:banana:èìêè èç :banana:åò:banana: :banana:ÿì:banana:.Âèäÿõ ñ:banana:ìî åä:banana::banana: êîÿòî áåøå ÷èñòî :banana:òè ñúñ ñúùèÿ ð:banana:äè:banana:òîð :banana:ì:banana: áåøå çåëå:banana::banana: ñ 256 :banana: ìîéò:banana: å ÷åðâå:banana::banana:.Ùå ïîñò:banana::banana: è ò:banana:ì è ä:banana::banana:î :banana:å ìè ñå ê:banana:ð:banana:ò,÷å ïèø:banana: åä:banana:è è ñúùè ð:banana:áîòè.
:stick:
Djmetal
01-04-2004, 02:16 PM
I think to start with 10kohm is it good for my cooling???
Grace
01-04-2004, 02:45 PM
Originally posted by Djmetal
I think to start with 10kohm is it good for my cooling???
Since I don't remember the resistance you better start with a 10K variable resistor and gradually lower it. Don't rise it too much, the 0.13m process surely won't like it.
Edit : I did mention that I'm not sure of this, didn't I?
Djmetal
01-05-2004, 12:13 PM
Ok I will try it after some days.