Cutthroat
12-18-2003, 01:14 PM
Alright here is my specs to start:
Abit NF7-S
Buffalo pc3200 ch5 2x256 @ 2-3-2-11or6
Barton 2500+
Case temps are 18-19C, with 20C ambient
(dont ask me how, ive tested it various times)
Tt Volcano 9 :( cpu idles around 35, and max load is 45-50
OK here is the problem.
I have been running 229x10 1:1 with 1.76 Vcore (1.825 in BIOS)
This became not stable in 3dmark.
I change multi from 10 to 9.5 (229x9.5), I can set any Vcore above stock and its 3dmark STABLE. As you can tell
my ram is 100% stable up to 230
What can be the issue?
Abit NF7-S
Buffalo pc3200 ch5 2x256 @ 2-3-2-11or6
Barton 2500+
Case temps are 18-19C, with 20C ambient
(dont ask me how, ive tested it various times)
Tt Volcano 9 :( cpu idles around 35, and max load is 45-50
OK here is the problem.
I have been running 229x10 1:1 with 1.76 Vcore (1.825 in BIOS)
This became not stable in 3dmark.
I change multi from 10 to 9.5 (229x9.5), I can set any Vcore above stock and its 3dmark STABLE. As you can tell
my ram is 100% stable up to 230
What can be the issue?