View Full Version : BuLkHy's Custom Jobber
BuLkHy
12-03-2003, 06:20 AM
thanx to all the pros out there....at last ive finished this setup...
esp:bowman,herefishy ,aenigma , berkut ,baker ..etc
neways here r some pics of it...gonna put it to test on my rig soon.... and im gonna tune it from there....
BuLkHy
12-03-2003, 06:22 AM
.........:D
BuLkHy
12-03-2003, 06:23 AM
............
BuLkHy
12-03-2003, 06:25 AM
...........
BuLkHy
12-03-2003, 06:27 AM
the temps r not too shabby.....unloaded -40?....
was hoping for -50... will try tuning is when its loaded.... hope to get more tips from any forumers here....
Marci
12-03-2003, 06:51 AM
hope to get more tips from any forumers here....
Need more specs for that fella... gas that's in there and how much of it, suction line and compressor temps (top and bottom), current length of cap tube and suction line in use, as well as diameters...
herefishy
12-03-2003, 07:38 AM
BulkHy.... Your machine is absolutely beautiful. My guess is that you employed a low-temp 404A compressor.... huh?
I can tell that you did the job right! As evidenced by the bandaid on your finger LOL!
The job isn't done right, unless there's blood on it!
:D
Ragnarok
12-03-2003, 07:44 AM
bulkhy, I been following ur progress for a while now. Damn that's some fine end product u got there, I luv the neat finish on the case!
Techmasta
12-03-2003, 08:47 AM
Awesome job. Love the case.
berkut
12-03-2003, 09:28 AM
I love the cooling head, is that teflon ?
baker18
12-03-2003, 09:43 AM
Look s great. Is there insulation on the cooling head?
baker18
lallend
12-03-2003, 10:02 AM
I think it's slick how you have the 4 vertical corners extended to provide "feet" for the unit!. Very nice work BuLkHy! :thumbsup:
very nice unit there bulkhy
culd you give us some more info on the detailed specs? and how did you make that cooling head? it looks liek acrylic or plexiglass or something, because i can see some copper under there :)
sharp
12-03-2003, 10:26 AM
Wery good unit,i dont know how but my case is the same and evap heat alsoo,can you take the pics of inside of unit?What gas do you use,r22?
afireinside
12-03-2003, 12:43 PM
Nice evap and sick prommie like case! :D How hard/how much did it cost to make that case? I want to try :)
Pandrone
12-03-2003, 03:39 PM
Is that acrylic on the evaporator? It looks like its good as insulation. Nice setup BuLkHy :toast:
CrashOv3r1De
12-03-2003, 04:30 PM
Awesome bulky. I thought that was a modified promy at first but damn that is something special :)
jobwell done my friend
all you need non if a temp sensor lcd :D
mrnuke
12-03-2003, 08:13 PM
BuLkHy, that is the sexiest thing i have seen since the hilton video :) by the way, how much did that all cost and how is that case constructed?
BuLkHy
12-03-2003, 08:16 PM
wau.....thx for all the comments.....thx thx.... gonna post screenshots later on..... ive made such casing coz im actually gonna sell there in my country...lol...not now..but when i gain more experience .... the evap head is actually acrylic..... i made its tranparent so i can see if there is condensation in it.... just to test...later on its gonna be black.... im suppose 2 insulate my evap with some sprayfoam...but since its air tight...i tried leavin the foam out...and it worked pretty well.... :)
Pimpsho
12-03-2003, 08:34 PM
thats so clean looking! and if u had a silver case like an lian li that would be flawless! good job man lets see some cpu temps now;) great job! did u build it from the ground up or did u get a unit and tweak some tubbing and such:slobber:
BuLkHy
12-03-2003, 08:40 PM
LOL....im actually gettin a LianLi casing soon.....in 2-3 days time....yeah..!!
BuLkHy
12-03-2003, 08:41 PM
..........
afireinside
12-03-2003, 08:42 PM
:slobber: That looks SICK! Very nice job bulkhy. I'm quite jelous. My chiller is so hidious.. **runs and cries**
BuLkHy
12-03-2003, 08:46 PM
lol....dun be m8.... u can do it as well....u have better skills than i do for sure....just a newbie actually....
afireinside
12-03-2003, 09:00 PM
You inspired me to make a case for mine :p Hows the CPU insulated? Do you have a plexi box around the CPU which makes contact with neoprene around the socket? Seems like a great idea. Mine was to put some neoprene on top of the block than a plexi holddown than mount it and put plexi around the sides to keep the air out. Your setup looks alot cleaner/easier though :D
And how much did the case cost to make?
WoW Bulkhy that really turned out nice!:toast:
You really took the bull by the horns on this project (with the help of other XS'ers) and made a very nice lookin unit. Once you have it fine tuned you should have the temps your after. :banana:
BuLkHy
12-04-2003, 11:26 AM
got a bit better with the evap temps...unloaded....
berkut
12-04-2003, 11:39 AM
BuLkHy - your interested in only 1 temp, LOADED!!!!
FUGGER
12-04-2003, 11:51 AM
Looks great, very nice work.
BuLkHy
12-04-2003, 01:07 PM
i have to get a good probe which fits between the Evap n Cpu IHS 1st....this thermometer up there which im using is a rod probe....max3 diode probe oni manage to hit -24c.... any higher it will go kaput... so i dun really noe wuds the loaded temp yet... chill berkut...:)
Techmasta
12-16-2003, 12:10 PM
Where did you get that condenser? Got any closer pics of the internals? Looks so nice and clean.
what did you to get that -40c to -47.5c?
i'm having same problem that evap hits unloaded only -40.5c
Bra!nFreeZe^
12-17-2003, 10:08 PM
Bulkhy you really have some skills regarding phase change you just gotte use them right!!....make one for me for instance ;) JK its really a NICE system! makes my XE ashamed!
chris4521
12-18-2003, 08:11 AM
how much would one of these run you?
im looking for quiet, little power draw.
(i dont expect crazy low temps)