New components

[jooelhoglund]

At last, it will be to buy some new components

This is how I have thought

Components # 1

http://i37.tinypic.com/2ij70j8.jpg

Components 2

http://i35.tinypic.com/e7kx9f.jpg

Components number 3


http://i34.tinypic.com/149qrrk.jpg

Why do I have 3 different packages is because I am unsure of memory and motherboards.

Components # 1

Motherboard: I took this motherboard because it does not seem to matter if you take an expensive or cheap iaf in överklockning.Är the gigabytes that Foxconn had a socket that can burn up? dangerous to buy this motherboard?

Memory: A bit expensive compared to packet n2 and 3, have fins so they do not become so hot, do not know if it is needed or not


Cooler: Have heard good about it, but would like to know if you get the 1156 brackets or not, some say you intefår fixed it says on the website

Strömkablen: My 550w so is the cable 8 pin is a bit too short, so I thought, linking it with a 6 pin and then to 8 pin on the motherboard

Components number 2

Motherboard: chose this because it looked good and for that gigabyte card can burn up (not sure if it was gigabyte card)

Memory: looked good, cheap by 8 latencies, however, not sure if you need other because of the heat when they do not have heatsinks

components number 3

Motherboard: check out what I wrote on the packet number 1

Memories: if these memories are good / better / capable than them more expensive so it is unnecessary to buy them as I thought the packet number 1

I already have a 9600gt, fans, Antec 182 and Corsair 550w Power Supply

Hope you bother to read what I wrote when I'm going to order soon!

I translated this text with google translate so say if you dont understand :)

And remember to write why you choose that component number

[Salamndar]

Why not go with a core i7/X58 Combo ?

From the list you posted, I think the last one seems more sensible!

[jooelhoglund]

[Quote = Salamndar; 4079116] Varför inte gå med en kärna i7/X58 Combo?

I listan du postade, tror jag det sista verkar klokare! [/ Quote]

Why i7 ? i dont have money for that

Okay , can you say why it's better ? wasn't the foxconn soket on gigabytes motherboard ?

[Leeghoofd]

It only happens when pushing big Vcore's, somehting you only do under phase or LN2 (normally) , it's also a nice recommendation to avoid people doing primes and IBT's during 24 hours...

First up what are your intentions with this rig ? Gaming only ?

Plz give me a link to that webshop so I can compare prices ( on eg other rams etc...)


Mobo : I always prefer to get the medium end ones : so UD4 or Asus Pro mobo. It all depends on what you intend to do with it for 24/7

The H50 Corsair : unit is nice and works well, but a high end air cooler is just as good. Plus an air cooler's performance is less influenced by the case. I still have my H50 unit working here on the I950 and love every bit of it's compactness.

Ram : I would opt for even the normal heatspreader PC12800C9 kit (so not the dominators or the C8 kit you have mentioned), saves you again a bit of money and daily performance will hardly be influenced. Don't worry about ram temps if you use them at the speeds they are designed for...

[jooelhoglund]

It only happens when pushing big Vcore's, somehting you only do under phase or LN2 (normally) , it's also a nice recommendation to avoid people doing primes and IBT's during 24 hours...

First up what are your intentions with this rig ? Gaming only ?

Plz give me a link to that webshop so I can compare prices ( on eg other rams etc...)


Mobo : I always prefer to get the medium end ones : so UD4 or Asus Pro mobo. It all depends on what you intend to do with it for 24/7

The H50 Corsair : unit is nice and works well, but a high end air cooler is just as good. Plus an air cooler's performance is less influenced by the case. I still have my H50 unit working here on the I950 and love every bit of it's compactness.

Ram : I would opt for even the normal heatspreader PC12800C9 kit (so not the dominators or the C8 kit you have mentioned), saves you again a bit of money and daily performance will hardly be influenced. Don't worry about ram temps if you use them at the speeds they are designed for...

I bought this for my rig right now is not so great, and I will buy a new graphics card soon

www.komplett.se
There is a Swedish website

I will overclock, and I want crossfire, is not achieved other things I want on the motherboard i think.I Did hear that there does not matter if I buy a asus pro or something cheap like ud3 for overclocking.

According to some tests so H50 is much better than the Noctua SE2, and they cost the same that is why I chose the H50 before Noctua SE2.

You mean it does not make much difference what mien I take them I have chosen, both are good?

Thank you very much for the replies!

[Leeghoofd]

Consider that to get the most out of the H50 unit that you need to mount it with the rear fans inversed (so sucking in air from the rear) this means that the hot air is dumped into the case (I measured around 5-8°c hotter mobo temps) also due to zero flow over my mobo I needed to add an Antec spot fan to cool the IOH (not required on P55)... your mobo needs some extra help with an H50 installed...

For Komplett prices you chose the cheapest hardware out, very hard to cut...

[jooelhoglund]

Consider that to get the most out of the H50 unit that you need to mount it with the rear fans inversed (so sucking in air from the rear) this means that the hot air is dumped into the case (I measured around 5-8°c hotter mobo temps) also due to zero flow over my mobo I needed to add an Antec spot fan to cool the IOH (not required on P55)... your mobo needs some extra help with an H50 installed...

For Komplett prices you chose the cheapest hardware out, very hard to cut...

So you mean if i choose h50 i need extra cooling for the mobo ? but if i choose Noctua SE2 i dont need extra cooling ?

For Komplett prices you chose the cheapest hardware out, very hard to cut...

What do you mean with that

[Leeghoofd]

I would recommend some air flow over the motherboard yes

Looking at Komplett's website, you already have chosen the most cheap components... if I order them eg at Alternate germany I can cut off about 50 euro's ( and have similar specs) Plz check if the UD3 really has full crossfire capability)

[jooelhoglund]

I would recommend some air flow over the motherboard yes

Looking at Komplett's website, you already have chosen the most cheap components... if I order them eg at Alternate germany I can cut off about 50 euro's ( and have similar specs) Plz check if the UD3 really has full crossfire capability)

Okay maybe i should buy Noctuas SE2 otherwise i need to buy some moderbaord cooling with the H50

Maybe it's cheaper there but to get the components here would cost some money too

Yes both ud3 and the asus board have Crossfire but 8x like all 1156 moderbards