PDA

View Full Version : Radiators for tec setup

.keith
12-02-2003, 05:09 AM
hi guys, need a little suggestion over here. just cant decide which radiators to get for my tec setup. well, the setup will be a 226w tec on processor. i'm still deciding whether to get a Dtek Procombo running push pull or a Jaron IceCool radiator running dual fans pull. any idea which one will perform better for tec setup? anyway, here is a link to Jaron IceCool (http://www.below-0.com/belowzero.asp?contenttype=zoom&product=147) and Dtek Procombo (http://www.dtekcustoms.com/index.asp?PageAction=VIEWPROD&ProdID=18) in case u want to take a look :p:
KnightElite
12-02-2003, 07:37 AM
Looks like the icecool is bigger, therefore making it my choice out of those two ;).
sandman
12-02-2003, 12:50 PM
Woah, that thing is expensive.

I'd go with one of the "dual" cores dangerden has.

It's just a caprice core.
NitroRat
12-02-2003, 05:36 PM
NAPA $24.95 12"x5-5/8"x2" don't play the mm game
.keith
12-02-2003, 09:18 PM
KnightElite, thanks for the suggestion ;) sandman, i live in Malaysia, the Dtek Procombo and Jaron IceCool is the two of many that i've sorted down and i chose Jaron IceCool because it's using camry core. and well, the price including freight for the Danger Den heatercore radiators and Jaron IceCool is almost the same :) NitroRat, i dont get u, NAPA?
NitroRat
12-03-2003, 02:51 PM
didn't know you lived in malaysia, its an autoparts store. A full 12inches x 5-5/8 inches x 2inches in size, bigger and cheeper than either of those. This part number heater core is from a late 70's gm car i believe , went in and talked to the guy and told him i was looking for a certain size core and he found a book with dimensions and pictures and i picked it out. Go to you local auto parts dealer and try to find one .
Holst
12-03-2003, 03:12 PM
Yep, a heatercore or two will be the best bet if you can get some.

Cheaper and better than a commercial rad.
NinCom
12-06-2003, 08:32 AM
Do any one one if the "Double heat core" is any good ? better then BIX2 !?
sandman
12-06-2003, 08:37 AM
Yea, it's just a chevette heatercore, it works better than the BIX2.
NitroRat
12-06-2003, 08:40 AM
Don't think it would work any better or worse but you save yourself a s load of money....
Hell-Fire
12-13-2003, 11:26 PM
Or you could use this. She holds 2x120mm fans. Has fast flow rates, and the claim is it beats any single BIce in cooling. Comes with either 1/2" or 3/8" brass barbs.

http://www.voyeurmods.com/detail.asp?PRODUCT_ID=WC-HC-D-BLK

http://www.voyeurmods.com/WC/Parts/Media/DHC.jpg
Soulburner
12-13-2003, 11:28 PM
With 2 120's it better damn well beat a BIX that uses only one fan...

Its probably the one im going with when the time comes to order.
NitroRat
12-14-2003, 08:04 AM
the bix2 uses 2 120's also
Soulburner
12-14-2003, 11:07 AM
Yeah but we are talking BIX, not BIX2.
NitroRat
12-14-2003, 11:47 AM
Do any one one if the "Double heat core" is any good ? better then BIX2 !?
Looks like he said bix2
Soulburner
12-14-2003, 04:53 PM
Originally posted by NitroRat
Looks like he said bix2
No, I was replying to Hell Fire...:rolleyes:
Originally posted by Hëll ‡ Fîrë
and the claim is it beats any single BIce in cooling.
NitroRat
12-14-2003, 05:02 PM
Well now we're talking about two diff posts, and the voyuermods rad you can get for half the price if you want to mod your own.