View Full Version : problem w3570 & E-760
[DRACO]
09-04-2009, 10:10 AM
I have trouble raising the bkl the w3570, soaring multi bkl low and this is due?
:shrug::shrug::shrug:
[XC] gomeler
09-04-2009, 10:16 AM
Going to need a little more clear English than that unfortunately. I run a w3570 and an E760 Classified and I have no problems running up to 220bclk in BIOS and ~240bclk in Windows. What exactly is your problem? Raising bclk past what frequency?
[DRACO]
09-04-2009, 11:05 AM
08 error Draco?
yes 08 error HIWA
bkl climbing then falling down the multiplier for example
150 x 29 = 4350
155 x 29 = x28
160 x 28 = x27
asin continuously
http://img527.imageshack.us/img527/2921/w3570.jpg
v0dka
09-04-2009, 01:25 PM
VTT volts?
My W3570 doesnt like high bclck either, but might be related to the board. More surprisingly, it doesnt like raised VTT volts. At all.
[DRACO]
09-04-2009, 02:10 PM
VT 1,52 VTT 1,45 DIM VT 1,65
MULTI X 29 FSB 150
DESACT= OCTIONS CPU
:shrug::shrug:
v0dka
09-04-2009, 02:37 PM
;3995676']
:shrug::shrug:
This sums up my thoughts pretty well actually. What are you saying?
Sam_oslo
09-04-2009, 02:56 PM
VTT volts?
My W3570 doesnt like high bclck either, but might be related to the board. More surprisingly, it doesnt like raised VTT volts. At all.
My w3520 doesn't like High VVT either, it is actually very "picky" and is reacting very differently than my old i7 920 C0, and what people are reporting about i7 D0 too .
With x4 RAM (DDR3-1680MHZ) it runs stable with 1.21v(BIOS set), up to BCLK211. I have tested and it is rock solid stable, (including HyperPi32 stable) at @4GHZ(211x19) and @4.2GHZ(210x20). But any VVT>1.26v won't even get into W7 (BSOD at W7-start).
With x5 RAM(DDR3-2100MHZ) it will ONLY run stable with VVT=1.32v, (anything else will be unstable).
I have no clue what you are trying to say either. My D0 doesn't like vtt either really, I mean it doesn't hurt OC but it just adds heat with no OC help (highest I have been is 1.5v). If you are trying to get higher bclk maybe you need more IOH voltage. Mine starts to need a bump at 215bclk or it won't even post.
[DRACO]
09-06-2009, 07:07 AM
VIDEO anyone can help me?
http://www.youtube.com/watch?v=rrNNtBIEyrw
http://img515.imageshack.us/img515/3260/imgp0466.jpg
.............................