Bigtoe's modded bios thread.

[Kunaak]

I just tried.

theres nothing in the bios that I can see related to Vcore or Vdimm.
if it is, its just plain old XXXX out with no values selectable.

theres quite abit to unlock in the KV8 Pro bios, but nothing all that interesting, you can disable or enable certain CPU caches, or disable ECC CPU cache.
other then that, theres not much of anything interesting in there to mess with.

nothing related to Voltages that I can see.

[xgman]

yep i asked the same but for socket 939 neo2 so modders as gfa3 says is anyone able to allow larger Vdimms through BIOS mods or is that just wishfull thinking. :eek:

The 1.36 beta bios allows up to +18% vcore. (gave me up to 1.9v actual using a pcpc510) The latest 1.37 beta (which helps with some false start power problems) knocks it back down to +10%. If anyone knows how to mod a MSi K8N Neo2 bios to reenable all options like 1.36 had, please PM me. I'll post this agin in a new thread just in case.

[Riska]

Is there some one ho can look at this bios for my soltek A64 NF250GB barebone??
http://www.soltek.nl/soltek/download/qbdownload.php?qisbn_st=EQ3801&isbn_st=SL-B9A-FGR
It is the 1.5R bios
Thanks in advance

[Riska]

Is this thread dead?

[STEvil]

yeah, pretty much

[Riska]

That sucks!

[Riska]

Any one here??

[EvilouS]

I am, I'm still looking for an AMI bios editor

[NWEng]

(crickets chriping)


:rocker:

[TheDude]

(Frogs croaking)..........(Frog legs sizzling in frypan) :D




I think BigToe must be on vacation? He deserves one.

[dimasdw]

this thread is dead ?
anyway anyone know where i can get modded bios for ASUS K8NE

[WesM63]

There is a few people I know that can mod bioses.

Kunaak
Tic-Tac
Bigtoe

The only three I know of. If you are very kind, try PMing one.

[Eyce]

I need a bios that unlocks the cpu multiplier in this bios, thats it, just the multiplier!

From some of the stuff I have been reading in this post that should be easy!

thanks!

[PaperBoy]

Bigtoe,

Can you tell me if the P4P800 bios hack that enabled MAM for FSBs over 200 would work with the P5P800? Aren't they basically the same board, whith the major difference being the sockets?

If the P4p800 hack won't work, would it be possible to mod the P5P800 bios to allow MAM to be enabled past 200FSB?


Thanks,

PaperBoy

[confuzzedintel]

Can you do AWARD bios's?

[Slam]

Hello all...new to the boards here.

I was wondering if Tic-Tac, BigToe, or Kunaak could modify a Gigabyte bios for me. I need more vcore. I havent seen much on Gigabyte bios mods. I'm hoping someone here could help me. 1.7 on the vcore just isnt enough. I use water cooling, so I dont have to worry about temps. I just need more juice.

http://www.giga-byte.com/Download/Download.asp?DownloadPath=/MotherBoard/FileList/BIOS/bios_k8nsp_f8.exe

Thanks,
Slam

[Tube]

I am, I'm still looking for an AMI bios editor

same here. there is amibcp (http://www.stormpages.com/crazyape/amibcp.html) but it looks like the older versions can't handle todays BIOSes

[EvilouS]

I can't believe there still is no ami bios editor. I wish I could flash an award bios to this board instead.

[BB mods's]

Hello every one...I have a Shuttle SB75G2 with all v mods, V dimm, V core, V drop..i was wondering if any one has made a moded bios that will suport up to 1.7 v core and maby 3.0v dimm? if any one wants to take on the job My machine shop would be at your service :) BTW im BBreaker over on [H]ard froum i build custom water blocks, Phase change systems,..ect.ect so if ya come up with me a moded bios for my shuttle it would be worth a lot to me :cool:

[BB mods's]

Any one game for the shuttle bios???

[Backbone]

Where I can find modded bios for Soltek 75Frn3 becouse I can't reach more than 250FSB or someone mod it for me or tool which I can mod.
Here is Soltek's bios (http://www.soltek.com.cn/download/bios/S75FN3J11.zip)

[TtecX]

Hello People, i hope one of you can help my after my odyssey of disappointment. Last december i had buy a finished PC-system. You buy it, plug in and it runs. It runs great must i say - it is a Intel Pentium 4 with 3,4 GHz (Model 550) with a lot of features but i could not change anything in the BIOS. allthing is locked - the builder of this system is MEDION. Them build all of them PC-systems so, that you could not change anything. They save in such a way costs of the support. When you could not chang anything, than you could not destory anything is maybe the intention of them. But, i would like to use my i915P-Motherboard in full! I would like to overclock something the RAMs or change other things - but is it no way for me.

MEDION is offering a new BIOS for this computer. You can download it here: http://www.ttecx.de/data/medion.bin

I had already tried to modify this *.BIN but i had no success. The biggest problem was to find a version of a tool that can handle a 4 MBIT *.BIN. The file is 512 KIB big and i despair already. :-( Your site was recommended by a lot of friends - are here somebody that would like to help me? I would be very grateful for each tip.

P.S.: The motherboard was built by MSI (MICROSTAR-INTERNATIONAL) - it wear the following model number "MS-7091". It is a special version for MEDION - the graphics card is the same problem, it is a "MSI 6610XL" - but in reality is it a NV43 for PCI-Express with GDDR3 - also a 6600 GT. Further it is a i915P-Board with DDR1-Slots and a LGA775-Socket in MICRO-ATX-Form.


Thank you, with special grettings from germany - Tobias.

[tictac]

Hello People, i hope one of you can help my after my odyssey of disappointment. Last december i had buy a finished PC-system. You buy it, plug in and it runs. It runs great must i say - it is a Intel Pentium 4 with 3,4 GHz (Model 550) with a lot of features but i could not change anything in the BIOS. allthing is locked - the builder of this system is MEDION. Them build all of them PC-systems so, that you could not change anything. They save in such a way costs of the support. When you could not chang anything, than you could not destory anything is maybe the intention of them. But, i would like to use my i915P-Motherboard in full! I would like to overclock something the RAMs or change other things - but is it no way for me.

MEDION is offering a new BIOS for this computer. You can download it here: http://www.ttecx.de/data/medion.bin

I had already tried to modify this *.BIN but i had no success. The biggest problem was to find a version of a tool that can handle a 4 MBIT *.BIN. The file is 512 KIB big and i despair already. :-( Your site was recommended by a lot of friends - are here somebody that would like to help me? I would be very grateful for each tip.

P.S.: The motherboard was built by MSI (MICROSTAR-INTERNATIONAL) - it wear the following model number "MS-7091". It is a special version for MEDION - the graphics card is the same problem, it is a "MSI 6610XL" - but in reality is it a NV43 for PCI-Express with GDDR3 - also a 6600 GT. Further it is a i915P-Board with DDR1-Slots and a LGA775-Socket in MICRO-ATX-Form.


Thank you, with special grettings from germany - Tobias.


I'm not sure what type of bios is that. If it is award6.0 bios ...you can use modbin tomod it... if it is AMI bios... afraid no tool to mod it.

But you should know that Modbin 6.....138 is not compitable on most latest bios by manufactures. :toast:
My tools in molabs sever is down.. We will restore it back later

[TtecX]

Thank you for your reply. The BIOS is a Phoenix 6.00PG - The tool "CPU-Z" say it.

What should i do to mod my bios with modbin? I could not open my BIOS. Have you any idea? Please help me.

[elec999]

Any modded DFI 865pe lanparty.
Thanks

[nFo]

Hello Peeps,

I have found: AMIBCP 8.0 mod tool, version 2.25 Beta.
http://translate.google.com/translate?u=http%3A%2F%2Fwww.biosrepair.com%2Fpic% 2Fpic83.htm&langpair=zh-CN%7Cen&hl=en&ie=UTF-8&oe=UTF-8&prev=%2Flanguage_tools

Downloads: http://www.diybios.net/upload/12562-1-1.rar
http://www.rebios.net/biosfile/AMIBCP%20for%20core8.rar
http://members.home.nl/jsruisch/BIOS%20UTILITIES/AMI/AMIBCP8.rar

And the: AMI MM Tool 8, version 2.22.1 - Decompresser/Compresser
http://members.home.nl/jsruisch/BIOS%20UTILITIES/AMI/AMIMM8.rar

You can now mod you AMI bioses under windows, because it's have an installer now.
I have tested with an beta bios 1006 from my board: Asus P4P800-E Deluxe.
And works fine........

Enjoy.:toast:

[TheDude]

WELCOME nFo!
Man o man, how cool is that! Thanks! :thumbsup:

[TtecX]

Hello People, i hope one of you can help my after my odyssey of disappointment. Last december i had buy a finished PC-system. You buy it, plug in and it runs. It runs great must i say - it is a Intel Pentium 4 with 3,4 GHz (Model 550) with a lot of features but i could not change anything in the BIOS. allthing is locked - the builder of this system is MEDION. Them build all of them PC-systems so, that you could not change anything. They save in such a way costs of the support. When you could not chang anything, than you could not destory anything is maybe the intention of them. But, i would like to use my i915P-Motherboard in full! I would like to overclock something the RAMs or change other things - but is it no way for me.

MEDION is offering a new BIOS for this computer. You can download it here: http://www.ttecx.de/data/medion.bin

I had already tried to modify this *.BIN but i had no success. The biggest problem was to find a version of a tool that can handle a 4 MBIT *.BIN. The file is 512 KIB big and i despair already. :-( Your site was recommended by a lot of friends - are here somebody that would like to help me? I would be very grateful for each tip.

P.S.: The motherboard was built by MSI (MICROSTAR-INTERNATIONAL) - it wear the following model number "MS-7091". It is a special version for MEDION - the graphics card is the same problem, it is a "MSI 6610XL" - but in reality is it a NV43 for PCI-Express with GDDR3 - also a 6600 GT. Further it is a i915P-Board with DDR1-Slots and a LGA775-Socket in MICRO-ATX-Form.


Thank you, with special grettings from germany - Tobias.

:confused:

[mich83]

I bought the new diamondmax 10 maxtor SATA 300GB and it isn t recognised at all by the BIOS :( I updated to the latest bios gigabyte has published (F11) but nothing seems to happen. I heard that there is a combatibility problem with larg drives-sil3112-and gibabyte mobos. Anyone know something? Can be fixed with a modded bios? My other SATA drive is maxtor 120GB diamond max9 and is working properly. The 300GB disk has been tested with other systems and works fine. I tried solving this problem with a pci SATA controller but i bought a silicon and nothing happened again. Now i m waiting for another one (Promise) and hoping... Any help would be very appreciated :(


Athlon XP 3000+
Gigabyte 7n400PRO2 (Rev 1.0)
2x512 Corsair DDR PC3200
ATI 9600PRO

[TheDude]

There's a 137gb registry limit....this will fix it.

http://www.maxtor.com/portal/site/Maxtor/menuitem.3c67e325e0a6b1f6294198b091346068/?channelpath=%2Fen_us%2FSupport%2FSoftware%20Downl oads%2FATA%20Hard%20Drives&downloadID=11

Enjoy that monster!

[mich83]

This is for the "windows can t see the drive problem"(though i have tried it). My problem is that the MOBO BIOS can t see the drive . Today i tried with another SATA pci Controller and nothing happened again. :-(

[TheDude]

Sorry Mich, I should have read it more carefully, my bad. I don't know of a fix for the bios....but here's a BUMP!

[BB mods's]

Any one have a bios for the IC7 MAX3??? im looking for the best bios i can grab for it...this is gona be a phase change cooled rig so all the setting's i can get would be nice :)


maby i wont kill this board like i killed the last 2?? LOL

[tictac]

Cheers

http://www.xtremesystems.org/forums/attachment.php?attachmentid=23230

[TtecX]

Cheers

http://www.xtremesystems.org/forums/attachment.php?attachmentid=23230
What ist this?

[Zildjian]

anyone can help me with a Epox 4pda5+ bios? (award bios)

there is a script that prevents using vcore options when inserting an prescott cpu.


http://www.epox.nl/english/support/bios/bios.php?id=123

pls help me :(

i have only 10$ on my cc which i can donate to someone who can modify this bios. :p:

[L30N^_^H34RT]

anyone can help me with a Shuttle an35n Ultra rev 1.1 bios?

[TtecX]

:confused:
Please me.

[Zildjian]

no one can help me?

[BB mods's]

TicTac Do u have any moded IC7 MAX3 bios's?

[p4-m overclock]

does this Modded Bios allow you to unlock the P4-mobile multi?

[Bausto]

How about an Epox 8RDA3I rev3.1 bios? Does anyone know how to mod it? I need lower voltages (i can only go as low as 1,4v in the bios and i need about 1,25-1,3v. Also, is there any possibility to read the temperature from the CPU's internal sensor and not only the one under the CPU socket?
I tryed to mod the bios but there is not much to mod. I couldn't find anything that i needed. Some performance boost tweaks would be great.
If u could help me Tictac or BigToe i would be greatful.

[shards]

Hey yall. I was wonderin if you could get the BIOS for an ECS N2U400-A and make it so I can change vcore and vdimm. I don't have a direct link but here's the site http://www.ecsusa.com -The direct link won't work unless ya got the cookies sorry.

[derbis]

hey guys,

i already found out how to set 1T Command on ASrock K7VT4A+ with WPcredit...but i wanna set the register in the Bios.
So i need your help, how could i realize that?

Bios 1.30 (http://www.asrock.com/support/bios/K7VT4AP130.zip)
There is the original Bios

It would be also nice if someone could explain it to me, so i give myself a try at this.

Thanks :)

PS: @pic: thats the actually stable FSB, but with Vlink @ normal, not high :(

[LenniZ]

Any good modded bioses for asus p4c800-e deluxe ?
thanks!

[Casy]

Can you guy's help me to find a modded BIOS for Abit kv7?

[BB mods's]

I was given the link to a max3 moded bios but there was no dl link for it..so can some one plz mod this bios for me?

http://www.abit-usa.com/downloads/downloads.php?file=http://file.abit.com.tw/pub/download/bios/ic7-max3/ic7p18.exe

[theonlybabyface]

Any good modded bioses for asus p4c800-e deluxe ?
thanks!


I have a modded bios for this board but the file size is over the 200kb allowable for attachments here.

[SDX]

Looking for a modded BIOS for ASRock P4V88 Mobo. One that can change ram timings and FSB:Ram ratio. Also, maybe alow for more acurate voltage increasing?

[b|lly]

Yea pls...I'd like a modded bios for ic7-max3 too. if there are some improvements? :)

[Kin Hell]

I have a modded bios for this board but the file size is over the 200kb allowable for attachments here.

Where did you download them from please?

Was it Tic Tac's?

You could always RAR.ZIP the file & email the file tho! :)

[Kin Hell]

Yea pls...I'd like a modded bios for ic7-max3 too. if there are some improvements? :)

Here is an IC7 MAX3 link for starters.

Tic Tacs ABIT Modded bios (http://s6.invisionfree.com/underclock/index.php?showtopic=1)

Its the 3rd file down. :)

File only (http://www.tictac.katrourke.com/bios/ABIT-IC7-21-R1.zip)

Tic Tacs Modded Bios Files (http://s6.invisionfree.com/underclock/index.php?act=SC&c=1)

[Barnacle Bill]

My Asus P4P800 BIOS (http://www.geocities.com/1aja@sbcglobal.net/P4P800.zip) AMI v.1019.005 Build Date: 10/14/04 only needs a vdimm modification; currently I have 2.55, 2.65, 2.75 & 2.85 volt options and I'd like to to see the volt options go up to at least 3.6v. I have the AMI BIOS utility AMIBCP 8.0 mod tool v2.25 beta and v7.51.03 but I don't have the expertise to use them. If someone could show me how to do the mod myself or do the mod for me I'd be very greatful and I'll share that modded BIOS with other via this forum. :toast:

Well I got no where using AMIBCP v7.51.03 perhaps because my BIOS is to large or new for that older utility. When using AMIBCP v2.25 beta sometimes referred to as v8.0 I loaded my P4P800 BIOS, clicked Setup Config./Advanced/JumperFree Config. When highlighting JumperFree Config. in the window on the right side under Group Control Structures I found DDR Reference Voltage and the numbers next to it were 0290. I then clicked the Bios Strings tab and scrolled down until I found 0290 which again linked to DDR Reference Voltage. I then edited the 2.55, 2.65, 2.75 & 2.85 volt setting in the string to 2.65, 2.85, 3.05 & 3.25 volts; clicked File/Save As and saved the modified BIOS file as P4P800Mod.rom. Did I do it right??? Can I safely flash that modified BIOS??? Thanks in advance!!!

[sao]

Hello, loaded me a Modet Bios and it up-played. That Bios ist from BigToe for IC7Max3 BTS1.3 Afterwards I went into bios and my attitudes made. As I dan save and exit to make wanted can I just as more enter press as I want. It stores it not and remains in the menu. ESC is useful also nix auser STRG +ALT+Enf. It takes the other attitudes at Intel Raid, Intel branding disable etc.... But if I want over clocks go nix it stand in the Bios however if I CPUZ start stand kind of clock and Fsb. As I tried this Bios again against a new of Abit zuflashen hang myself the AWdflash.exe on look for the Bios.Bin file happened nix more. Can someone help me?

sorry for bad translation i´m from germany

[LenniZ]

I have a modded bios for this board but the file size is over the 200kb allowable for attachments here.
hmm, what new features is in that bios ? more vdimm ? :D Just PM me and I'll give you my e-mail/msn, i really want a new bios :)

[WLS-Xenolith]

I am trying to get my barton core XP-M 3000+ to work correctly with my Chaintech 7NJL6. The most recent bios doesn't recognize the chip (or any XP-Ms for that matter). It will boot, but at a FSB of 100 and a multiplier of 6. Should be FSB 133 and 16.5 for the multiplier. So I guess what I need is a bios that will correctly identify my chip.

I tried the Award Bios Editor (http://awdbedit.sourceforge.net/), but I guess I need an additional plugin for it to recognize my particular bios. Any other programs that may work? Keep in mind I have negligible hacking skills.

Thanks.

[emerald]

Well I got no where using AMIBCP v7.51.03 perhaps because my BIOS is to large or new for that older utility. When using AMIBCP v2.25 beta sometimes referred to as v8.0 I loaded my P4P800 BIOS, clicked Setup Config./Advanced/JumperFree Config. When highlighting JumperFree Config. in the window on the right side under Group Control Structures I found DDR Reference Voltage and the numbers next to it were 0290. I then clicked the Bios Strings tab and scrolled down until I found 0290 which again linked to DDR Reference Voltage. I then edited the 2.55, 2.65, 2.75 & 2.85 volt setting in the string to 2.65, 2.85, 3.05 & 3.25 volts; clicked File/Save As and saved the modified BIOS file as P4P800Mod.rom. Did I do it right??? Can I safely flash that modified BIOS??? Thanks in advance!!!

well you can flash that modified bios of course but it wouldn't change anything because these strings you edited at the adress "0x0290" are only names for values which are still the same...
i'm also very interested in increasing the vdimm over 2.85 volts without modding my motherboard !
so does anybody know how to change these values :confused:

[nFo]

Buy a: OCZ DDR Booster :hehe:

If you look in the bios, you will see under in the bios screen: 2.XX
2.51 for example on my Asus P4P800-E Deluxe, so we need a up to date version of: AMIBCP 8, I think.
Because the lastest version is: 2.25 Beta :(

[OV3RCLOCK3R]

is there any gigabyte k8nf-9 modded bios around?:)

[NWEng]

My Asus P4P800 BIOS (http://www.geocities.com/1aja@sbcglobal.net/P4P800.zip) AMI v.1019.005 Build Date: 10/14/04 only needs a vdimm modification; currently I have 2.55, 2.65, 2.75 & 2.85 volt options and I'd like to to see the volt options go up to at least 3.6v. I have the AMI BIOS utility AMIBCP 8.0 mod tool v2.25 beta and v7.51.03 but I don't have the expertise to use them. If someone could show me how to do the mod myself or do the mod for me I'd be very greatful and I'll share that modded BIOS with other via this forum. :toast:

You can't mod the bios to make the mobo do what it's not physically capable of, that's why some are forced to change/add/delete resisters, etc. :fact:

[Kin Hell]

Hello, loaded me a Modet Bios and it up-played. That Bios ist from BigToe for IC7Max3 BTS1.3 Afterwards I went into bios and my attitudes made. As I dan save and exit to make wanted can I just as more enter press as I want. It stores it not and remains in the menu. ESC is useful also nix auser STRG +ALT+Enf. It takes the other attitudes at Intel Raid, Intel branding disable etc.... But if I want over clocks go nix it stand in the Bios however if I CPUZ start stand kind of clock and Fsb. As I tried this Bios again against a new of Abit zuflashen hang myself the AWdflash.exe on look for the Bios.Bin file happened nix more. Can someone help me?

sorry for bad translation i´m from germany

Yeah Sao, Re-flash your bios. Do it from a DOS Prompt if u can. Before you flash, Power off, ENABLE Clear CMOS, Flip the battery & go make a coffee. Drink Coffee, Re-insert Battery, Disable Clear CMOS, boot from floppy Disk & flash Bios again. Hopefully you will be Ok.

Good Luck

[emerald]

You can't mod the bios to make the mobo do what it's not physically capable of, that's why some are forced to change/add/delete resisters, etc. :fact:

"physically capable of" :confused:

you can change vdimm from 2.55V to 2.85V with the bios ( by software ;) )...
why should 2.85V be the max ?!?

[STEvil]

because the resisitors, diodes, capacitors, mosfets, and other assorted parts that make up the electrical circuitry of the board dont allow anything over the max unless they are designed to be capable of doing so.

Only the DFI's socket 754 and 939 motherboards are capable of this.

[NWEng]

"physically capable of" :confused:

you can change vdimm from 2.55V to 2.85V with the bios ( by software ;) )...
why should 2.85V be the max ?!?

Because that's all the physical circuitry is capable of delivering. Just because you write 200MPH on your speedometer doesn't mean your car can go that fast, does it? To increase that capability, you may be forced to mod the hardware by adding or changing a resister that supplies the voltage to a given component. Does it make sense now?

[emerald]

so the question is: is p4p800 by its electrical circuitry able to give ram more than 2.85 volts ?

Only the DFI's socket 754 and 939 motherboards are capable of this.
stevil says indirect no...
do you have some links or so.. where proved information can be found ?

gl&hf
emerald

[NWEng]

so the question is: is p4p800 by its electrical circuitry able to give ram more than 2.85 volts ?


stevil says indirect no...
do you have some links or so.. where proved information can be found ?

gl&hf
emerald

I believe STEvil is referring to the fact that those DFI boards are able to deliver more than 2.85v because they were manufactured to do so. One thing you need to understand is that the bios is just software used to tweak the board. It's not a magical end-all be-all product that can make the mobo do things it's not capable of doing.

I'm beginning to believe that you have a rough and disappointing road of overclocking ahead of you. Maybe stang_man wasn't that far off base....

[emerald]

@NWeng:
hehe.. no, i have vdimm-modded my motherboard and it works well (oc also ^^) but i don't really like the mod and while i was searching for a modded p4p800 bios i found barnacle bills post and i find it really interesting...

It's not a magical end-all be-all product..
yes, right but that isn't new to me ;)

but is it not possible that asus manufactured p4p800 aswell so that it can deliver more than 2.85V but users are only given the options 2.55, 2.65, 2.75 and 2,85 to select per bios ?

(could be that my questions sound a little bit strange or stupid then plz apologize that, my english is not the best :rolleyes: )

gl&hf
emerald

[LittleDevil]

Any modded bios for IC7-MAX3 18?

tnx

[SKYNET]

Is there any Gigabyte K8NXP-SLI modded bios around ?

[elec999]

Is there any modded bios for Asus a7n8x-x.
Thanks

[STEvil]

bleedinedge.com hosts bigtoe's modded bioses. There are a7n8x-dlx bioses there last I checked, which may be compatable with the a7n8x-x also.

[grFalcon]

Hi everyone, can the greate gurus mod bios for GIGABYTE GA-K8N Ultra-9.
I try modbin6 and it show that everithing is unlocked!!!, But in reality the most usefull feature is absent :-(. "Advanced chipset setup" !!!! I was shocked ! :eek:
Pleeeessss. I hope that somebody (may be TicTac or Bigtoe do something...) will help me
Here is the link: http://america.giga-byte.com/MotherBoard/FileList/BIOS/bios_k8nu-9_f2.exe
Thank's

[John S.]

Hi everbody.
Is there any modded bios for Gigabyte GA-8IPE1000-G?
Thanks.

[andlcs]

Why can't I open THIS (ftp://211.78.163.2/product/it/mb/bios/kx18ds_series/18ds101.zip) bios w/ MODBIN6? I get this message:

!! BIOS Version not 6.0 !!

[Charlie Harper]

Is there any Gigabyte K8NS S754 modded bios around? Give me link please :)

[Astral7]

Bigtoe(or anyone), know if it's possible to combine the best features of these two bios for use with CT-479 adapter? Like VID and multi adjustment from VM added to P4P800-SE bios.


P4P800-SE (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i865pe/P4P800_SE/)

P4P800-VM (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i865g/P4P800-VM/)

Thank you

[Tony]

Bigtoe(or anyone), know if it's possible to combine the best features of these two bios for use with CT-479 adapter? Like VID and multi adjustment from VM added to P4P800-SE bios.


P4P800-SE (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i865pe/P4P800_SE/)

P4P800-VM (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i865g/P4P800-VM/)

Thank you

Im workin on the p4c800e at the mo....hopefully soon I will have the answer

[Tony]

max3 18 bios, sorry i have been away, OCZ keep me to busy.

As usual UAYOR (use at your own risk)

Max3 18 (http://homepage.ntlworld.com/a.leach80/bios%20files/max3/IC7P_18.rar)

[Astral7]

Im workin on the p4c800e at the mo....hopefully soon I will have the answer

Thanks for your efforts. I shot a pm to tictac but I guess he is busy as well. I read over at BIOSMods where Tmod said it is very hard to open up things such as multi options with these bios. But I will keep trying. I really don't know why Asus did this. :confused: I mean all this time the multi option was there when the only chip that could use it was an ES. Now with the CT-479 and unlocked downward multis to 6x they take it out. :rolleyes:

Anyway, we will figure it out eventually.

Thanks again Tony

[jrw]

Bigtoe(or anyone), know if it's possible to combine the best features of these two bios for use with CT-479 adapter? Like VID and multi adjustment from VM added to P4P800-SE bios.


P4P800-SE (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i865pe/P4P800_SE/)

P4P800-VM (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i865g/P4P800-VM/)

Thank you

What an idea. I would do just about anything for a bios like that!

[1860ly]

is these has Epox 8KDA3I mod bios so that can support mobile A64 3400+?

[Kin Hell]

Im workin on the p4c800e at the mo....hopefully soon I will have the answer

Hi there B T :)

Maybe if only for "names - sake", I shoulda dropped u a mail before now, but having not done so, I do hope u are well & Life is good for ya!

Hows that P4C800E Deluxe Bios looking?

Dropped my IC7 MAX3 for this board. My 2.8 Northwood C @ 240fsb 1:1 with OCZ PC3700EB now runs at 246fsb 1:1 :toast:

Better still are the Temps:

Idle down to 20 deg.C on CPU & 20 deg.C on Case from 36 deg.C on CPU & 34 deg.C on case. :banana:

(maybe only half a banana as Asus probe & Bios dont match)

Cant wait to get Hipros MAXIMISER on this rig.

A lot of folk rate the IC7 MAX3 as the best Overclocking board for the Socket 478 CPU's but from what I see here, Asus has the edge by 6Mhz on the fsb, yet hard drive access through the same High Point ATA133 controller appears a tad laggier. Have set PCI Latency to 32, same as MAX3. Default is 64! Any ideas BT?

I'm waffling again, my JD & coke needs more rocks & JD so I'm away! :D

Speak again soon bud & all the Best

Kin

[bigmunkey]

Please please please give info on the P4C800E-D BIOS.. even if its a list of new bit and fixes your wokin on.. iv JUST got my board and i wanna play.. only @ 4Ghz @ 1.3v on my 3.2 EO step scotty.. want more.. my ram is good with this bios though..ballistix 2-3-2-7 @ 250Mhz

[Tony]

Please please please give info on the P4C800E-D BIOS.. even if its a list of new bit and fixes your wokin on.. iv JUST got my board and i wanna play.. only @ 4Ghz @ 1.3v on my 3.2 EO step scotty.. want more.. my ram is good with this bios though..ballistix 2-3-2-7 @ 250Mhz Im workin on the CT 479 bios, to add multi support.

[Tony]

MSI Neo2 and SLI latest Bios, this one has X2 support and they say cures the 90nm issues.

grab it here (http://homepage.ntlworld.com/a.leach80/bios%20files/MSI%20K8N%20NEO/neo2%20and%20sli%20X2%20bios/MS7100V33.zip)

[bigmunkey]

hey bigtoe. i have the sl7pm 3.2 scotty. do you have a bios that will enable my to drop the multi to 14 like some of the other scottys can.. nice to see your workin on the adaptor, i got a dothan sat at home andi got an adaptor on its way.. got my dothan on ebay for £25... its a 1.4Ghz one :D

[P_1]

MSI Neo2 and SLI latest Bios, this one has X2 support and they say cures the 90nm issues.

grab it here (http://homepage.ntlworld.com/a.leach80/bios%20files/MSI%20K8N%20NEO/neo2%20and%20sli%20X2%20bios/MS7100V33.zip)
can this bios can be flashed to both k8n neo 2 plat (nforce 3 ultra) AND neo 4 sli (nf4 sli) ??? (bios name says 7100 which indicates its for neo 4 sli) :confused: :confused: :confused: :confused:

[MaRtIe]

so is this definitly useable for neo2?

[eva2000]

MSI Neo2 and SLI latest Bios, this one has X2 support and they say cures the 90nm issues.

grab it here (http://homepage.ntlworld.com/a.leach80/bios%20files/MSI%20K8N%20NEO/neo2%20and%20sli%20X2%20bios/MS7100V33.zip)
so this bios for MSI K8N Neo2 and supports san diego/venice cpus ?

[tictac]

it is neo4 bios....
typo error there ;)

[uclajd]

Im workin on the CT 479 bios, to add multi support.Great job. Now if only Asus would do this. :lol:

[bigmunkey]

any news yet to a new P4C800E-D BIOS???

[nobig]

Hello there!

I'm new in the forum and with a search i did i couldn't find a modded BIOS for the EPOX 9nda. I'm not intresting in voltage increases because i have done the Vmem mod. I just want to get more options for the memory. Is there a way to do this in BIOS and not every time with A64 tweaker?

Is there a secret menu in EPOX?

[v4p0r]

anxiously awaiting those p4c800-e dlx bios bigtoe. BTW love your modded bios man

[LittleDevil]

Does anyone have modded bios for MSI K8N NEO2 Platinum?



tnx

[rktmn247]

Great thread! Props to Big Toe & TicTac for all the hard work. I am looking for a modded bios for the Abit IS-10. Tried the one off of Kunnaks site but there were no unlocked options after I flashed. Tried multiple times with no luck. Here is the link to the abit bios:

http://www.abit-usa.com/downloads/bios/bios_revision.php?categories=1&model=137


Any help will be greatly appreciated!

[STEvil]

litledevil: google and search are good to use.

http://www.xtremesystems.org/forums/showthread.php?t=43033&goto=newpost

[xx_ED_xx]

A buddy of mine has been using a p4 mobile sl7du with some success on these boards but i bought the "E" stepping of this processor and it wont do anything is there an updated bios to recognize it ??? :stick:

[Waus-mod]

I have a serious issue with my DFI nf4 ultra-d

I have a 3700+ Sanny
It wont get beyond the 310mhz htt. and also it wont give me my 3.7vddr any more or i will see windows in 16bit colors :slap:

Yesterday i played with DI but cant set really a record because i need a high htt and the 3.7vddr.

Can someone help me?

[tonnilerche]

Hello BigToe..

I own a IC7 ( just the regular. Not -G or MaX III ) and a 2.8 SL6WJ.

Problem is that is clocks like "#¤%&/.. Meaning fsb235 is THE limit for me. ( tried everything, mem divider, volts, pci-lock, game acceleration and so on. )..

Now i found out that im kinda missing a feature in bios called "Performance Mode" or "PAT".. It SHOULD be located just underneath the stuff with "Game Acceleration"..

Would you try to see if you could find something called that, and unlock it ?

The newest from abit: ftp://ftp.abit.com.tw/pub/download/bios/ic7//ic728.exe

Greetings, Tonni Lerche - Denmark =)

[zizo]

Hi, I was wondering if anybody could help me mod a bios for my Asus K8N. I search every where but couldn't find anything useful. MSI motherboard with the same chipsets can be overclocked to 350HTT and I tried it from windows with clockgen and it's stable but bios only has up to 300HTT. I have no knowledge of bios modding and don't know what I can add to bios options. I just need to overclock my system a bit more.

Thank you in advance

Here is the latest bios for Asus K8N.

http://www.asus.com/pub/ASUS/mb/sock754/K8N/K8n1006.zip

[bigmunkey]

PLEASE MR BIGTOE, where is this new P4C bios.. iv see nthe new ASUS beta has minimal Vcore and Multi options to play with if u get the Ct-479 but i need more.. HELP !!!

[Hinnavaatlus]

bigtoe, to u have GOOD bios for 9NDA3J?
Updated bios sucks realy :slapass:

just asking for help :stick:

http://www.epox-europe.com/downloads/bios/?obj_product_id=272
here are def. Bioses for 9nda3j :fact:

[turbopsi]

Hi, I'm new to these forums. Can you mod a An35/n Ultra motherboard bios for me?

Or assist me in modding it myself, I've modded video card bios'es many times.

I would like a chipset voltage setting in my bios, and maybe higher core and memory voltage.

ANY help would be appreciated.

Thanks,

Chris

[NetZeroZeus]

Where ar ethe links to the modded BIOS'es?
I can't see them anywhere, and I can't find the tictac BIOS for the Abit NF7-S V2.0, where the heck is it? I can't even find them on Google....

[ABCcletta]

Hi Bigtoe. I would ask you if i can flash a bios for a Epox 8KDA3+ on a 8KDA3+ Pro.
The motherboard use different bios. Here the links for the specs:

8KDA3+
http://www.epox.com.tw/eng/products_content.php?ps=224

8KDA3+ Pro
http://www.epox.com.tw/eng/products_content.php?ps=343

The basic difference is the SATA system.
For the 8KDA3+ there are 6 SATA ports. 2 are controlled by the chipset and 4 by a non specified controller (probably Silicon Image). For the 8KDA3+ Pro there are 4 SATA ports, 2 controlled by the chipset and 2 controlled by a Marvell 88SR3020 SATA PHY.

The rest of the specs are identically, also the IO Winbond controller and the Gigabit PHY by Vitesse.

[b1tterman]

could someone give me some tips, guides or at least links for making voltmods on gigabyte k8ns-939? i would appreciate that. thx

[Shark-357]

Hey!
Is there any chance of somebody modding the Gigabyte K8NS S754 bios
the damn thing doesnt even have the multi for HTT :(
here is the link to the latest F13 bios
http://www.giga-byte.com/Motherboard/Support/BIOS/BIOS_GA-K8NS.htm
i could use a HTT multi ,maybe some ram settings ,dividers

Thx :)

[BB mods's]

Can this bios be opend? and if so will any 1 take a look to see what can be unlocked or added? DFI875p-t LGA775 http://www.dfi.com.tw/Upload/BIOS/75TLD325.exe

[GOZ]

I need a working link to a IC7-G modded bios Anybody got one???

[Tommy L]

Hello

I have search the web for a modded bios to my SN41G2, but no succes.
Tryed to get it from tictac web site but it was closed.. I know he modded a bios for it.

unhide hidden features
enable vcore change
enable vdimm change
enable cpu multiply change
enable nb volt

Or what you find able to enable! hihi

can or does some one have a modded bios please send me or link me to it.
If some one feel for it please take a look at this bios and maby you can mod this? ftp://ftp.shuttle.com/BIOS/fn41/fn41(SN41G2)/fn41s032.bin

Thanks

[krAsh]

HI i am new to bios modding bu have tried it on my MSI K8N Neo Platinum mobo.

Anyways I wanted to know if a DFI LanParty UT nF3 250GB Bios wud work on my mobo (as both have same chipset)???

If yes then how to flash it???

Can I change different parts of MSI K8N NEO's Bios with DFI LP nF3 250Gb UT's bios via award bios editor???

Need imediate help

[jjcom]

You'll end up with an unuseable board if you try that. They both use the same chipset, yes, but how each motherboard maker design the board differs. no to all your questions :(

jjcom

[donnietri]

Is there any Gigabyte 8IPE1000 Pro-G modded bios around ?

[Kjaups]

Hello!
Is there any moded bios for ASUS P4P800-X (BIOS FEATURE: 3MB Flash ROM, AMI Bios, ACPI, PnP, DMI2.0, WfM2.0, SM Bios2,3 - it is from my motherboard user guide).
Thanx!

[olDirdey]

bigtoe, can you take a look to this bios file?

ftp://ftp.shuttle.com/BIOS/fb61/fb61v3/fb61s30s.bin


it´s from shuttle sb61g2v3 with intel i865g chipset. I know there a some hidden functions in the advanced chipset sections, but they take no effect at all.

but maybe you find something that winbond bh-5 ic´s are working better on it :D (vdimm is modded, so that is not the problem)


Thank you!

[aasmaukr]

Hey, i was wondering what software you use to mod bioses like that...?
and, is there anything you can do with a Abit NF8 bios? Like higher Vcore or Vdimm? Here's a link, anyways: ftp://ftp.abit.com.tw/pub/download/bios/nf8//nf817.exe

Thank you :)

[kroku]

hi
bigtoe, could you edit the newest bios ftp://www.asus.com/pub/ASUS/mb/socka/KT880/A7V880/
especially, unlock all hidden options and, if possible, enable to set vcore lower than 1.65V for mobile processsors...
otherwise it would be great if you could tell me, how to edit this bioses, which programs? 'cause i can't find anything to open this bioses :(

[Kin Hell]

I need a working link to a IC7-G modded bios Anybody got one???

Have you looked here?

http://www.abxzone.com/forums/showthread.php?t=37370

[$ilver]

anything for abit an8u around ?

[xfxlover]

hi, im new to the forum, i need a modded asus a8n-sli bios, i have searched every where, i need more voltage options, maybe unlock hidden option basiclly i need a overclockerts bios...please some1 this board is driving me mad...oh maybe a voltage option for nb if possible, also since updfating bios for sd it only allows me to supply 1.50vcore i need more

it mujst be bios 1011 as any others are instable

http://support.asus.com/download/download.aspx?SLanguage=en-us

[ludeboy12]

hi i was wondering if someone could help me.....

i have flashed to 704-2bt on my dfi ultra-d....anyways when i try and enter the bios i get to a screen that says something on the lines of intel ide raid conroller v4....detecting array....

it just hangs there an never actually lets me in the bios......

i have unplugged everything except for 1 cd drive and my keyboard and mouse, both of which are non-usb.....

also i noticed that there is 1 red diagnostic led still lit when it hangs here....

any ideas as to how to fix this would be great as id like to get a few extra clocks out of my 3200 with this....

thanx in advance.....

[CyberKnight]

which program do you use to mod these bioses ?... don't give us fish , teach us to fish :D

[Ket]

mr. bigtoe sir, would you consider helping all the AN8 Fatal1ty SLI users and working the boards and its little brothers BIOS bugs out? :)

[iboomalot]

delete

[toledo]

Hi Bigtoe . Is there a way to have the multipliers enabled in the Asus P4GD1 for Dothan .

Latest bios (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i915p/P4GD1/) :D

[xfxlover]

we post in this thread and get no reply

[jrw]

Hi Bigtoe . Is there a way to have the multipliers enabled in the Asus P4GD1 for Dothan .

Latest bios (ftp://ftp.asus.de/pub/ASUSCOM/BIOS/Socket_478/INTEL_Chipset/i915p/P4GD1/) :D

I second that. Although multis in bios would be nice, PCI-E/PCI locks would be even better!!! :)

[lawrywild]

Hey Bigtoe, any chance of adding some higher vdimm in the P4P800-X bios?

atm it only goes up to 2.65v and thats nothing really, also agp voltage would be nice aswell.

Cheers, i'd worship you if you could do this for me lmao :D

[Tony]

Cleaned the build up a little, renamed a few options to make them easier to understand and set the bios defaults to be more friendly at boot.
Rgone loves this build already...thought i would share here ASAP, he says its much better than anything he has tested before.
Grab it here (http://homepage.ntlworld.com/a.leach80/bios%20files/DFI%20bios%20mods/704-2BTA.zip)

Its tested as good if you have the need to play, post here if you like the build.

[Tony]

we post in this thread and get no reply

I do come over here but you guys need to understand a few things.

I can only tweak what is already there, I dion't have a bios compiler so adding voltages or ratio's etc will not happen. I can change memory tables etc but normally there is no need...the reason?
most motherboard manufacturers set their bios defaults to tight, this is for review purposes to make their boards look good. all i hvar to do is set what i know is sweet timings to get a good boot wjile overclcoked and the bios is transformed...this is all i usually do.

now, if the bios has hidden options i can unhide, I can not add without recompiling...major headache without the right tools ;)

[Dissolved]

I do come over here but you guys need to understand a few things.

I can only tweak what is already there, I dion't have a bios compiler so adding voltages or ratio's etc will not happen. I can change memory tables etc but normally there is no need...the reason?
most motherboard manufacturers set their bios defaults to tight, this is for review purposes to make their boards look good. all i hvar to do is set what i know is sweet timings to get a good boot wjile overclcoked and the bios is transformed...this is all i usually do.

now, if the bios has hidden options i can unhide, I can not add without recompiling...major headache without the right tools ;)


what all is needed to add these options in the bios?

Dfi doesnt have any tools you can use? :P

[FE4R]

I do come over here but you guys need to understand a few things.

I can only tweak what is already there, I dion't have a bios compiler so adding voltages or ratio's etc will not happen. I can change memory tables etc but normally there is no need...the reason?
most motherboard manufacturers set their bios defaults to tight, this is for review purposes to make their boards look good. all i hvar to do is set what i know is sweet timings to get a good boot wjile overclcoked and the bios is transformed...this is all i usually do.

now, if the bios has hidden options i can unhide, I can not add without recompiling...major headache without the right tools ;)

can u do what u do best -unhide and optimise my bis please? Id do it myself but I have no clue. Here is a link to my bios, the one with .F6 at the end after extracting the files... please help me out?

http://asia.giga-byte.com/MotherBoard/FileList/BIOS/bios_k8nu-9_f6.exe

[ReelMonza]

bigtoe, how do I enable these options in BIOS, I see them in _EN_CODE.BIN but somehow they don't show up in MODBIN6 :(

DRAM Bank Interleaving

Burst Length
8 beats
4 beats
2 beats

Enable All DIMM slots clock

Large Memory Simulation
Disable
4GB

And I'm not sure about the following settings :

Bank Interleaving interlock
At Least not
All Present are ???

Node memory Interleaving
Node Interleaving interlock


I'd like to enable Burst Length option cause my board freezes when I disable 32 byte granularity...

[cantankerous]

Thanks Bigtoe. Important question on this bios however. Does it still contain the vcore issue of the original 704? Are all voltage options above 113% been disabled or is that all fixed up now? I have never been able to try 704 because of the vcore bug as I need 123% and it was disabled. I hope to hear back from you soon and with good news that all voltages are selectable again otherwise I will have to do without. Thanks.

[arctic-k20]

thanks bigtoe - d/l and testing ...........now

[Ubermann]

It has up to 113%

[cantankerous]

figured so. Yet again this bios isnt for me. I have no clue why after 2 months the bug wasnt fixed that allows you to use vcore properly like every other bios.

[FE4R]

*sigh,

[cantankerous]

anyone else out there have issues where their system will just not work if the ram is in the yellow slots? For me, right when verifying dmi pool data should be showing the post halts and goes into an endless reboot cycle. Really annoying. Any ideas?

[xgman]

Thanks Tony.

[Weee]

Hello,

New here, but I caught the request for a linky to original BIOS.

asus a8n sli premium, I grabbed up the 1006 bios because I was having stability issues with the latest nvidia chipset drivers

http://dlsvr03.asus.com/pub/ASUS/mb/socket939/A8N-SLI%20Premium/A8NSP006.zip

I remember reading that this guy has vcore up to 1.65 but with my a64 sandy I only see up to 1.55, makes my peltier sad

[Mikesta]

the new 704-2BTA BIOS sucks for my set up.

I have reversed my VX to the worst combination

i.e. 3.2v id get 245 winmemtest stable when memory is in good order, 235 when in bad order (swapped) this was with 704-2 original.

Now with 704-2BTA I cant get 230 stable with 3.2. i think im going to go back

[DyJohnnY]

hi bigtoe...someone did mention the epox9nda3j around here...anything else u can do to it? unhide some options of sorts?
i'd ask you to find a way to make this damn board do 1t with tcxx RAM, but no one's a magician :(

[lawrywild]

Hey bigtoe, had a chance to look into the P4P800-X bios yet, im sure some vidmm options must be "unlockable", i would do it myself but i dont have a clue how.

Cheers please please, ballistix is coming tomorrow so i need vdimm :p

[Einstein]

I am modding the bios on my emachine w2888. Really, the modification is only to replace the oem string with the retail string so that I can upgrade to the latest retail bios for my board. the problem is the bios is locked, and is refusing all attempts to flash. Even recovery mode won't touch it.

[shumway]

Probably a long shot but anybody know of a modded bios for a Msi K8t neo-v?

[chata]

hey guys

Does anybody knows a modded Bios or a way to set free the mulitbler on this board for CT479?

I cant beleave , that i had better bioses from Asus for the cheaper P4p800-SE then for this Board :(

[jrw]

bigtoe, can you recommend the best way to "ask" Asus to release a multi-supporting bios for the P4GD1?

Its my impression that you sometimes have something to do with the release of new bioses and I thought we might benefit from your experience...

Which email-addy should we send our distress-call to?

PM me if you have anything useful to say about this.

If you haven't got the time - no sweat :toast:

[jcmarfilph]

Hi Bigtoe,

Can you modify this ASRock K8Upgrade-NF3 BIOS

http://www.asrock.com/support/bios/K8UNF31.10.zip

for it to have the VCore option always enabled coz its grayed and disabled for Processors without Cool-N-Quiet feature.

Thanks and more power!

[ElAguila]

Bigtoe I just found out on another forum that dfi is not going to fix the issue with using higher than 113% on the nf4 boards. Do you know what caused the problem? If so is there any way that you can fix the issue?

UPDATE.
I found what the issue is and I was hoping you might be able to fix it since dfi is not going to and with my x2 this bios is only one that runs good with my system. The problem is stated here in post 32:
http://www.dfi-street.com/forum/showthread.php?t=16500&page=3&pp=15&highlight=wrong+voltage

"The bug of 7/04 bios is this bios will program "CPU VID Special Control" first
before setting protection to cpu voltage ...

If you set "CPU VID" to a high voltage , EX : 1.55V then change to a low " CPU
VID " and a high " CPU VID Special Control " in the same time , hit the save and exit ...
Before the bios set the " CPU VID " to low voltage , the "CPU VID Special Control"
will be programmed first without protection and may generate some core voltage
like 1.55V * 1.36... Although it's a very short period , but If the cpu can not
handle this voltage , the cpu will be dead ... Especially 90nm core cpu ..."

[unc_fester]

Hi!

I'm sure u guys can help me!
I can't add any voltage to my RAM, so it I can't run my CPU @ it's rated frequency. :mad:
So my question is: Can u (Mr. Bigtoe) make change my BIOS so I can adjust memory voltage??? :confused: :confused: :confused:
Here's the BIOS file -> http://www.asrock.com/support/bios/845D_P1.50.zip

THX in advance! ;)

[Timofonica]

Hello!!, p4c800 E deluxe has 1,600v max to prescott cpu, is possible by modding lastest bios to put more v to this cpu´s, thanks..

PD: i´m spanish so me english will be a little incorrect or bad written sorry :(

[ken]

hi there :)
I know you been very busy atm but if you got spare time, can you have a look at the DFI DAGF BIOS to see if there are any thing you can unlock and tweak it abit :)
here the link :http://www.dfi.com.tw/Support/Download/bios_download_us.jsp?PRODUCT_ID=3510&STATUS_FLAG=A&SITE=US

thanks alot
ken

[Kin Hell]

Hello!!, p4c800 E deluxe has 1,600v max to prescott cpu, is possible by modding lastest bios to put more v to this cpu´s, thanks..

PD: i´m spanish so me english will be a little incorrect or bad written sorry :(

My P4C800 E Deluxe Bios offers me a range of 1.3750v to 1.9500v!? This is version 1023 from Asus site. I can't see it being like this for me just because I have had a 2.8 Northwood in earlier. The Bios has been reset several times whilst trying to OC my new 3.2 Prescott. Shes running 255 fsb (4.07Ghz) at 1.55v and is Prime Stable. Air cooled using T.R. XP120 with 1400rpm vantec 120mm fan, Idle Temp @ 38/39DegC, max load Temp 49/50DegC

To be honest, I'd refrain from going much over 1.550 anyway, unless you are Phase Changing to get the heat away. CPU migration starts happening at silly voltages & 1.75v was the max to be safe on the Northwoods. Allowing for a 0.2v over stock to be safe, then 1.55v would be the safe limit for the Prescott, though there may be more headroom with the smaller Die Size!

Maybe re-flashig your Bios would resolve your querey. Good Luck! :)

[Timofonica]

I have the same bios like you, presscot 3,4 ghz, drop 14x the multy and 285 fsb geil ultra x 2.5 4 4 8 4 clocks 2.65v, stable at 1,600 v, that it´s the limit in this motherboard to this prescott, i can put 1,625 ando more, but the mobo do not starts, because the limit that have this mobos and bios on prescott, the refrigeration it´s medium - good zalman 9500, and the case good refrigerated with silentxs 12 cm, also the chipset, i think that it´s possible to modify the bios instead of doing the v mod to the mobo, is it possible by bios???, how can i´ll do it??, thanks ;)

[Gogar]

Hi tony i am new to computer.. i want overclock!!!! can you come to my house and overclock pc K THX!!!!!!!!!!! :)

LOL reading all these posts i'm starting to feel bad for tony :D

[Kin Hell]

:D I have the same bios like you, presscot 3,4 ghz, drop 14x the multy and 285 fsb geil ultra x 2.5 4 4 8 4 clocks 2.65v, stable at 1,600 v, that it´s the limit in this motherboard to this prescott, i can put 1,625 ando more, but the mobo do not starts, because the limit that have this mobos and bios on prescott, the refrigeration it´s medium - good zalman 9500, and the case good refrigerated with silentxs 12 cm, also the chipset, i think that it´s possible to modify the bios instead of doing the v mod to the mobo, is it possible by bios???, how can i´ll do it??, thanks ;)

I'm guessing you can't do sweet FA about it. A close friend of mine has a 3.4 & he can change the Multiplier to 14 on his. Not sure what his voltage selections are, but my 3.2 Prescott is LOCKED at 16 multiplier with no other choice. So, one could assume (even though assumption is the mother of all fuc* up's) that the 3.4 Prescott has something different about it's architecture compared with its lesser siblings. Having said that, my m8s 3.4 will do 4Ghz @ X17 multipler with 235 fsb. Yet when he drops the Multiplier to 14, it will not do ANYTHING over 250 fsb which sets the CPU @ 3.5Ghz? Now that is really wierd and using the mother of all fuc*ups again, one can only "assume" the Chip is falling over on its CORE speed & not the FSB. A lot of people refer to the Core Speed of the chip as the FSB. This is not true. The Core speed of the CPU is NOT the FSB. The Core speed of the CPU is the resultant speed determined by the FSB of the chipset.
On a brighter note though, you are very lucky to get 285fsb compared to my m8's CPU which he can only get 250fsb with, at a 14X multiplier. My 3.2 does 256FSB at 16X which slaps this baby at exactly 4.1Ghz, on Air! Not happy at chucking 1.55V at it tbh, but then hopefully, Hipro5's MAXIMISER will stop the Vcore Droop & give me a little more! Whilst shouting here, I got 2 x 1Gb PC 3200 ram running at 256FSB 1:1 with 2.75V & 3-3-7 timings at CAS 3. That is just bloody awesome considering I paid £40.00 a stick brand new! :D
Even if you ran the bios through a Bios Editor, I'm not sure that there would be ANY voltages available over 1.65v because the 3.4 core appears to be very different from the slower Prescotts. As I said earlier, unless you are using some serious Phase exchange cooling, FORGET using more than 1.55 volts anyway as you are probably going to burn out the CPU. :stick:
EDIT* Your English is far better than my Spanish, as I dont know any Spanish at all. I hope you can understand what I have tried to explain to you here & I'm poking you with a Stick to listen SERIOUSLY about OVER-VOLTING the Prescott. Its a very HOT Core by default, untill you hit the the J series of Socket 775 CPU's. Please be vey carefull or it will all end in tears & a Dead CPU.

[blind_ripper]

so is there a modded or a sorte of bios for the dfi RDX200 CF-DR ,
thate fixes the htt 300+ problem yet ?

[Kjaups]

can u add ram, agp and chipset voltage measuring in bios for ASUS P4800-X latest bios

[bobikobic]

Can you unlock cpu, dimm voltage and thermal monitoring for Albatron PX865PEC Pro.
bios link (ftp://211.78.163.2/product/it/mb/bios/px865pec_pro/65pc102.zip)
Thanks!
My e-mail bobikobic@hotmail.com

[eric_croatia]

Can you mod a bios for dfi lanparty ut nf4 ultra-d ?

[Severus]

I'm looking for a modded bios for epox 8npa7i. It's said that i can give up to +0,35V for CPU but in fact i can only give +0,15V :| My CPU needs higher Vcore to go up but all i can give is 1,55V...

[The Stilt]

I'm looking for a modded bios for epox 8npa7i. It's said that i can give up to +0,35V for CPU but in fact i can only give +0,15V :| My CPU needs higher Vcore to go up but all i can give is 1,55V...

The newest bios version has +0.35V option (just checked).
8NPA7I v. 05.11.07 (http://www.epox.com.tw/eng/download.php?t=U0wyRnpjMlYwY3k4eU1EQTFMekV4THpFMEw ySnBiM00zTXpFek5UazJNVFF4TG5wcGNEMDlQVGh1TjJrMVlqQ TND)

[The Stilt]

can u add ram, agp and chipset voltage measuring in bios for ASUS P4800-X latest bios

Those features are not supported by hardware.
Use the multimeter instead.

[Severus]

The only problem is that I've got the newest epox BIOS and even so I can't give higher vcore -,-'

[r3w4]

I want to modify my bios for a MS6702 K8 motherboard. AMIBCP 225beta will not open any bios for the board. MMTool opens the bioses, but I have no idea how to change things. Is there a guide for MMTool?

I found a AMIBCP 2.43.2.0. It still won't open the bios, but now it says that a "language module" isn't with the bios.

[debaucher]

Hello everyone.
Just read through this entire thread (quite a read) and am trying to get my hands on some modded bios's for the IC7-MAX3, but all the links posted in this thread seem to be dead.
Does anyone have the latest/best modded bios or links to them for the IC7-Max3?
And if so... could you list them/send them to me?
I will provide email upon request via PM etc...

Thanks in advance.
D.

[lofiunico]

Could someone please help me with the BIOS for the Asrock P4DUAL-915GL. All I want is some vcore/cpu voltage adjustment. The BIOS doesn't seem to have any hidden options, so I was pretty stuck. Thanks in advance.

File: http://www.asrock.com/support/bios/P4915GL1.30.zip

[ShaTR]

Bigtoe,

Any chance of unlocking the hidden menu's in the gigabyte GA-K8NS???? (rathern than having to hit ctrl-F1 or something like that. i never remember)
Also maybe unlocking some voltage options. It's a good board, but more vdimm/vcore would be nice.

Cheers!

[franz.b]

My mb is a gigabyte ga-7n400pro2rev2. I mod the last ufficial bios updating the ide raid and the sata last bios and unbloking the hidden menu. I can send it to anyone who is interessed or who can post it somewhere.
Now I'm interesting to other modding but I'm not able to... :shrug:
in particular I'm interesting to unblock the multiplier, permit 16 timing to PCI device, and any other for best performance. I found this thread: http://www.hwupgrade.it/forum/showt...threadid=785101
in which i found modded bios for the ga-7n400pro2rev1, but it is not compatible with the mine... (sure? perhaps i can only update the sata bios? but it's only an f6, the offical last is f11) and I would replace in my bios the same modifies. can anyone help me?
in this other link http://www.xtremeresources.com/forums/showthread.php?t=34627 I found a Silicon 3512 modded bois, but the download is break. has anyone downloaded it? or anyone know a miror?

thanks a lot

[Kin Hell]

Hello everyone.
Just read through this entire thread (quite a read) and am trying to get my hands on some modded bios's for the IC7-MAX3, but all the links posted in this thread seem to be dead.
Does anyone have the latest/best modded bios or links to them for the IC7-Max3?
And if so... could you list them/send them to me?
I will provide email upon request via PM etc...

Thanks in advance.
D.

I did PM you about these modded Bios files, I have several here!

Do you want them or not? :stick:

[jbmx4life]

SOYO P4VTP Bios......
http://www.soyousa.com/downloads/filedesc.php?id=2238

Can someone take a look at this for me please and let me know if there is anything that can be done with it? Thanks in advance!

[Tony]

Asus A8R-MVP 0037 bios as used by Wesley at AT on his review. Good for TCCD, TCC5 UCCC and infinion, but crap with BH5 and UTT

grab it here (http://tony.i4memory.com/asus%20bios%20files/A8R-MVP-ASUS-0037.ROM)

[dxtr]

Guys, especially Tony, maybe u got some modded stuff for IC7/IC7G ? Plz post it if u have.

[davekusa]

need modded bios for IC7 MAX 3

Pentium 552 (mobile p4 3.46)
system will not finish boot with HT enabled (works with HT disabled)

NOTE: IS7 motherboard works with same cpu and HT

[rammbfm]

Thx using the 704 bios for my dfi ultr-d very cool! Works fine!

[jbmx4life]

SOYO P4VTP Bios......
http://www.soyousa.com/downloads/filedesc.php?id=2238

Can someone take a look at this for me please and let me know if there is anything that can be done with it? Thanks in advance!

:stick:

[Nanometer]

Would it be possile to mod an A8N-SLI Premium bios, to get back the 1.65 vcore max that was taken away in all new BIOS revision? Wish I could find some information on what values in the bin file could change it.

[sly322]

is there any bios for k8nsc-939
?

[Riska]

Can you help me to unlock evrything in the shuttle sn25p barebone bios they have put up a new one and it have fixes for raid but they have locked the fsb to 250mhz and i know there is many other things aswell.
thanks.
fn25s027.zip is the new one.
ftp://ftp.shuttle.com/BIOS/sn25p/

[Riska]

And can u fix the problem whit the boot logo and x1800xt and x1900xt gfx cards other mobo manufactors have done it but not shuttle

[fabbro76]

Hello everyone!!! I need help.....
I own a Epox 9NDA3J rev 2.x and I would know if exist any modded bios after the latest official.......

Thank You and sorry for my english. :):p:

[mrhelix]

any bios mod for asus K8N-E plzzzz

[OCPerformance]

A Bios mod for DFI lanparty NF3 Ultra D (activate 4V please if possible)

Ist it possible to activate in DFI lanparty NF3 Ultra D Bios the 4V
like In the DFI lanparty NF3 UT 250GB Bios ?

3,2V are to little

[karlsdash]

hey i have an intel 845 pe chipset and i was wondering if there was any mods for it? I have tried a few things but i get a flash memory error.... any help would be appreciated!! Thanks
heres the site http://intel.com/products/motherboard/d845pemy/index.htm

P4 2.4 g
512 mg ram
7800gt
230 g sATA
Dell 4550 originally still dell board..... waiting for conroe, or fx-60 to be cheaper!!

[markee]

ATTENTION PLEASE!!!
ASUS P4C800-E DELUXE
MODDED BIOS FILES NEEDED
miras03@op.pl

[Sam666]

Any bios's for Abit AN8 SLi Fatal1ty

[kiwi]

Gigabyte K8NS
Bios f18

Basically vcore max is only 1.55V (10% in bios) and I would like to get 1.7V or so.

http://www.giga-byte.com/Support/Motherboard/BIOS_DownloadFile.aspx?FileType=BIOS&FileID=11727

I tried using this award bios editor but somehow it didn't work:
http://sourceforge.net/projects/awdbedit/

Actually I've been thinking for a long time to start modding bioses myself but I just dont know where to start.

[Raphie]

Guys i assume this was a DFI only thread. Might be good to note Big toes last post in this topic before placing anymore "me too" requests.....:stick:

[kiwi]

Sorry, I didn't read all pages :) I am just trying to figure out why can't I edit award bios with modbin and awdbedit. Modbin gives me header sum error.

[RobOC]

Hy Guys...:)

The a8n-sli asus mobos have a very big problem in this crazy world of machines...the Vcore is very slow...There is a lot of people posting in a lot of forum crying for an vcore increase, or, on the other hand, an unhide of all posible options to do a decent OC.:banana:

Would it be possile to mod an A8N-SLI Premium bios, to get back the 1.65 vcore max that was taken away in all new BIOS revision?:clap:

This is the last official version:
http://dlsvr01.asus.com/pub/ASUS/mb/socket939/A8N-SLI%20Premium/A8NSP009.zip

and this the last beta:
http://dlsvr01.asus.com/pub/ASUS/mb/socket939/A8N-SLI%20Premium/1011-006.zip
anyone can kill the beast? :confused:

Please help me and a lot of owners of this mobo...who make it possible (at least anything) would be the boss for all us!

Thanks in advance an sorry for my poor english.

Best wishes...Rob;)

[Tony]

Infinity RS482 beta bios full unhides etc.


Grab it here (http://homepage.ntlworld.com/a.leach80/bios%20files/DFI%20bios%20mods/RS482/INFINBTA.zip)

[jonspd]

Tony I take it you never got my p.m.?

jonspd

[Tony]

Tony I take it you never got my p.m.?

jonspd
I may have done, been real busy of late. send again

[Tony]

Workin on the latest beta for the Infinity, will post soon

[jonspd]

Ygpm

[Haltech]

Infinity RS482 beta bios full unhides etc.


Grab it here (http://homepage.ntlworld.com/a.leach80/bios%20files/DFI%20bios%20mods/RS482/INFINBTA.zip)

ill give this a whirl tomorrow. Tony, what was changed in this beta?

[Tony]

0406 DFI NF4 bios files, all 3 in one zip
VE = venus
EX = Expert
last one is old skool NF4

Added option for "odd divisor correct" removed write cas latency (fixed at 1)
Added hidden options for VE and EX Vdimm to over 4V and chipset to 2V
Relaxed all timings as per BTA bios files for ease at boot, CPC2T etc, should be boot friendly with most dimms.

TRAS may report 0 on reboot, set optimised defaults and reboot back to bios and it should set 8.

I have the Venus loaded here and its clocking real nice, remember this is 3rd party so no warranty off me, DFI or OCZ, use at your own risk.

Tony


Grab it here (http://tony.i4memory.com/DFI_%20bios_%20files/Modded%20406%20DFI%20files.zip)

[Mr. Tinker]

May I be the first to say THANK YOU!

[bachus_anonym]

Tony, since you're the only one I can ask regarding this...

I have a question regarding latest beta (3/29) from Oscar for DFI NF4 Ultra-D/SLi/SLi-DR... Do you have any idea why div150 is not selectable in BIOS anymore with Opteron 146 and multi x10? It's just funny how it's there in 6/23, then not in 7/04, then back again in 11/14 and again, not in 3/29 :confused:

I'm taking advantage of you appearing in this thread once in a while... :D

BTW, thanks for another modded BIOS, although I have not used any of them :D :p:

[Aleman]

Tony, since you're the only one I can ask regarding this...

I have a question regarding latest beta (3/29) from Oscar for DFI NF4 Ultra-D/SLi/SLi-DR... Do you have any idea why div150 is not selectable in BIOS anymore with Opteron 146 and multi x10? It's just funny how it's there in 6/23, then not in 7/04, then back again in 11/14 and again, not in 3/29 :confused:

I'm taking advantage of you appearing in this thread once in a while... :D

BTW, thanks for another modded BIOS, although I have not used any of them :D :p:

I want to add a question to the one of bachus

what is the FSB KeyIN option in the 3/29 BIOS?
9. Change FSB option to keyIn method.

and how does it work? is it a hotkey to set a different FSB?

[ShaTR]

hey tony, any chance of diff "special vcore %" options on the NF4 bios?? an 8% and 16% would help me out wonders, since i run overclocked with CnQ enabled. thx.

[Pyr0]

I want to add a question to the one of bachus

what is the FSB KeyIN option in the 3/29 BIOS?
9. Change FSB option to keyIn method.

and how does it work? is it a hotkey to set a different FSB?

this just means that you can enter a number to set the FSB instead of having to cycle through all the values to get to the one you want :up:

[Delirious]

THANK YOU!

Two questions, what exactly is the odd divisor correct, not sure its what i think it is?

And for the dram drive strength they are listed as "weak" and "normal" but then there is one that is "level 7"?

0406 DFI NF4 bios files, all 3 in one zip
VE = venus
EX = Expert
last one is old skool NF4

Added option for "odd divisor correct" removed write cas latency (fixed at 1)
Added hidden options for VE and EX Vdimm to over 4V and chipset to 2V
Relaxed all timings as per BTA bios files for ease at boot, CPC2T etc, should be boot friendly with most dimms.

TRAS may report 0 on reboot, set optimised defaults and reboot back to bios and it should set 8.

I have the Venus loaded here and its clocking real nice, remember this is 3rd party so no warranty off me, DFI or OCZ, use at your own risk.

Tony


Grab it here (http://tony.i4memory.com/DFI_%20bios_%20files/Modded%20406%20DFI%20files.zip)

[Tony]

Level 7 is Weak 4, i have corrected this

Key in method is so you key in the fsb you want and it will show this, remember to have key lock engaged on your keyboard.

150 divider, seems to be CPU related I think, i will look into it.

Remember the registers that were reserved for 150 may be used on some CPU's for the new upclock ratio's now

[Tony]

hey tony, any chance of diff "special vcore %" options on the NF4 bios?? an 8% and 16% would help me out wonders, since i run overclocked with CnQ enabled. thx. Harwware limied m8, so no can do. Remember the I/O chip handles these options and it only has a fixed amount of registers it can tweak per the voltage regulator that is used ont he board. Only a vdimm mod will get you whaat you need.

[Lane-k]

Same ask what is exactly doing the ODD correction? and in what case it must be enabled?

i have flash it and begin some test.. I have leave ODD enabled for the moment..

[Tony]

It slows down your ram by altering the way it rounds what dividor your cpu will use to calculate the ram speed.

[sergiu]

I have a P4P800 motherboard and I would like to mod my bios for allowing me to use smaller vcore for my P4 2.4c (1V or below). I want to make a silent pc and decreasing vcore (in combination with smaller FSB) would allow passive cooling). The bios can be found at http://dlsvr01.asus.com/pub/ASUS/mb/sock478/p4p800/P4P81019.zip . I opened my bios with AMIBCP 2.25 beta and I saw that there are strings even for 0.835V, but I have no idea how to modify the bios.

[Delirious]

It slows down your ram by altering the way it rounds what dividor your cpu will use to calculate the ram speed.


So basically it allows you to further tweak the divider you use?

Sorry im not the sharpest tool in the shed.:D

Any example would really help and be much appreciated.

[ShaTR]

It slows down your ram by altering the way it rounds what dividor your cpu will use to calculate the ram speed.

a vdimm mod or vcore mod??????????

if vdimm mod, can someone please explain to me how that works. cheers!

[Tony]

a vdimm mod or vcore mod??????????

if vdimm mod, can someone please explain to me how that works. cheers!
should ve vcore mod, sorry m8 had a long day

[Tony]

I have a P4P800 motherboard and I would like to mod my bios for allowing me to use smaller vcore for my P4 2.4c (1V or below). I want to make a silent pc and decreasing vcore (in combination with smaller FSB) would allow passive cooling). The bios can be found at http://dlsvr01.asus.com/pub/ASUS/mb/sock478/p4p800/P4P81019.zip . I opened my bios with AMIBCP 2.25 beta and I saw that there are strings even for 0.835V, but I have no idea how to modify the bios. look for the really early builds of the bios for your board, they allow for some real low Vcore. The only issue is the mosfets get pushed real hard and may blow...tyrust me i did the same thing with a celly mobile a good while back running 1.1Vcore

[ShaTR]

lol. no worries. thx anyways. guess im stuck at 2.75 then!

[Tony]

So basically it allows you to further tweak the divider you use?

Sorry im not the sharpest tool in the shed.:D

Any example would really help and be much appreciated.

I corrects the rounding off of the ratio's you have to use to work out your ram speed. It seems to go to the oposite ratio next instead of theusual one it uses which is usually the next ratio up.

We found from tests it is like the 180 mode if running 200fsb, BUT from running a 250 ratio it seems to drop you inbetween the 250 and the 233

[ReelMonza]

Hold on Tony, I'm writing you a PM

[sergiu]

How "early" must be the bios? The first bios version I can find on Asus site is 1009, and I still can't use lower vcore. Also, my motherboard came with version 1012. Is it safe to put something much "early"?

[ShaTR]

quick question:

which bios is this 0406 one based off of????

I don't see any 0406 on DFI's site (beta or final release section)

???

[Pyr0]

it's based on the 3/29 bios :up:

[cantankerous]

Tony, I want to take this time to thank you. I have been reading this forum for a few days and had actually downloaded all 3 versions of the 406BTA bios but never did give you a thanks. I finally flashed it yesterday. I had a hard time posting but finally got it going after a CMOS clear. I really don't see any change from any other bios on my system but I do thank you for your time and effort. It isn't doing any harm so I am going to keep it on my Ultra-D. I am using an even divider so can't even fool with the new divisor option but we will see what happens when I get my 2GB PC4000 EB Plat kit next week. Thanks again.

[Tony]

CFX3200 bios that I tweaked a little. DFI released me to post this as a 3rd party BT bios so here it is.

Relaxed timings, 2T at default and pretty boot friendly, tweak it for speed as usual.


Grab it here (http://homepage.ntlworld.com/a.leach80/DFI%20CFX3200%20bios%20settings/R037BTA.zip)

If you already downloaded this file download again and overwrite the old one, i have updated this file with more fixes.

[AlterBridge86]

Awesome job Tony - i just ordered a CFX3200 from NewEgg and was trying to download your bios to get myself ready but it seems your link is broken :( Could you fix? Thanks!!

[mucker]

Tony, have you reworked any Epox bioses? I have a 9NPA+ Sli that is lacking a couple of settings compared to my DFI Ultra-D.

Is it possible to add a 180/200 memory divider. There is nothing between 166/200 and 200/200.

Also, can a Tref value of 1.95 be added. Currently there is 15.6, 7.8, and 3.9 only. Thanks...

m :)

[Tony]

Untweaked 037 bios for the DFI CFX3200, be sure to set MAL and RP manually to at least 5.5 and 7 once its flashed and you must manually set TREF also, do NOT leave it at AUTO.


Grab it here (http://homepage.ntlworld.com/a.leach80/DFI%20CFX3200%20bios%20settings/R5D_037.rar)

[cronic]

ok i got a venus on the way. Tony what bios do you reccomend for UCCC 2 x 1 gig kit. Thanks

[Fayt_Leingod]

Could someone PLEASE release a modded version of the BIOS for an Asus A8N-SLI Premium with a higher VCore or VDimm. Preferably both.
Thanks in advance! :)

[MsB]

Bios Mod Wish- INFINITY RS482 bios that would allow me to set my ocz and g-skill pc4000 cache latency to value of 4 instead of being limited to 3.

[DemonicInfluenc]

Bios Mod:

P4P800-E Deluxe with full PAT and more vdimm options like more intervals ;)

[Bootsy]

Someone PLEASE release a modded version of the BIOS for an Asus A8r32 Deluxewith a higher VCore.

[Tony]

Someone PLEASE release a modded version of the BIOS for an Asus A8r32 Deluxewith a higher VCore.

The issue is the I/O output may not allow higher..if the hardware switch will not allow higher there is nothing you can do without hardware mods

[RyderOCZ]

Bios Mod:

P4P800-E Deluxe with full PAT and more vdimm options like more intervals ;)Google for BigToe's PAT hack....all the info is out there for the PAT part of your request.

Vdimm options are limited to what the board is capable of producing which depends on the components on the board, not just a bios mod.

[DemonicInfluenc]

The issue is the I/O output may not allow higher..if the hardware switch will not allow higher there is nothing you can do without hardware mods

I mean like more choices for the low volts. Not necessarily higher..

LIke right now I have 4 options for the volts from 2.55-2.85.. Maybe 10 choices in same volt range???


Google for BigToe's PAT hack....all the info is out there for the PAT part of your request.

Tried that... But that killed my bios :( So, I was hoping for maybe a modded bios will do the trick :)

[DemonicInfluenc]

In a post in Abxzone:

http://abxzone.com/forums/showpost.php?p=1181151&postcount=329

It said you know the way to set the 533 strap in AMIBCP.

If so, then could you tell me how?

Sorry for Double Post :(

[rastaseb]

I don't really understand what means the "odd divisor correct" on the last modded bios for DFI Expert!
when set, my bandwith is about 7110 mb/s on sandra 2005 and when off, it gives me 7600 mb/s

but i'm still synchrone : 275*11 on my opty 148 and ram at 275

the latest version of cpu-z 1.33.1 gives my memeory frequency at 252 when the odd divisor correct is set....

[$ilver]

Modded Bios for Biostar T-Force 6100 939 ?

There must be some hidden setting for higher chipset voltage and dividers :)

would be nice

[STEvil]

I don't really understand what means the "odd divisor correct" on the last modded bios for DFI Expert!
when set, my bandwith is about 7110 mb/s on sandra 2005 and when off, it gives me 7600 mb/s

but i'm still synchrone : 275*11 on my opty 148 and ram at 275

the latest version of cpu-z 1.33.1 gives my memeory frequency at 252 when the odd divisor correct is set....

http://www.xtremesystems.org/forums/showthread.php?t=95860

ODC icreases the memory divider when running an odd CPU multiplier (1,3,5,7,9,11,13,etc)

[STEvil]

tony or someone, any options worth unhiding in this bios? Cant adjust much of anything at all as it is :(

ftp://ftp.hp.com/pub/softpaq/sp30501-31000/sp30514.exe

[Hardass]

Looking for a new bios to try in my P5AD2?

[luca_rastor]

Guys i need new bios for my old Abit BH7. Anyone has some? I need some dividers, cos i went to a 800 FSB CPU and can't go with it past 215 cos of my memory. OCZ performance :( is not so good.

All dividers i have are 1:1 3:4 and 4:5. I need one with 4:3 or 5:4, something to allow me go high FSB lower DDR frequency.

Thanks alot. This board is wicked sick. I ran before a Pentium4 2Ghz at 3,3 stable one year by now. Changed it cos this new one has HT, which improves the performances quite well.

Please help me with some link for new bios.

[m_i_o]

What is the best bios for DFI LP NF4 SLI Expert with Crucial Ballistix mems?
I'm working on last release from DFI and I reached 265MHz 3-3-3-8. Everything is seams to be stable but I faced with 3D mode problem when PC hanged up while running 3D applications (Games, marks, etc.). Setting of driver level = 7\1 helps to pass 3DMakr2005 but still impossible to pass 3DMark2003. Today I will try to release timings a little. So I'm looking for more stable BIOS.

[lucas81]

Could someone PLEASE release a modded version of the BIOS for an Asus A8N-SLI Premium with a higher VCore or VDimm. Preferably both.
Thanks in advance! :)


I second this request! Only 1.5V now at the 1302 beta bios.. :(:(

[dippyskoodlez]

Possible for anyone with the tools to check ami bios's if they can see if tehre anything to un-hide in the MSI K9N Neo (AM2) bios?

This thing has crap for options.. :mad:

[SirMute]

Hi!

Please take a look at bios for Asrock 775dual-VSTA Click (http://download.asrock.com/bios/775/775Dual-VSTA(1.70).zip)

It has mentioned in MultiLanguage part of rom, available core voltages, but they're not shown in bios itself.
Is there any possibility to unhide vcore regulation?

Thanks in advance.
M.

[xero freelance]

hi umm...mr big toe sir?
can you take a look at the GA-K8VM800M?
all i really need is teh pci/agp bus frequency locked
if you find any other options that would help along the way thats great
thanks a million :)

[DEVIL K-ce]

Hi Tony

My friend in Poland have problem with P5B Dlx Wifi

Power mobo and Chassis Intruded. Clear cmod and nothing.

Can You Tony mod the bios too Asus P5B Dlx Wifi and delete the verification of chassis intruded, or disabled this function ?

This is link too org. bios ---> http://195.117.93.7/witek/0609.ROM


Thank's for help.

[TaPaKaH]

P5B nonDLX request

A bit more Vdimm&Vmch, please (if possible) :D

[I)ickie]

P5B nonDLX request

A bit more Vdimm&Vmch, please (if possible) :D
Definately secconded,

Also I don't know if anything can be done with the DFI 975X/g. You seem to specialise in DFI bioses and a lot of people are lost with this board.

Obviously you have 1000's of requests in this thread and completely understand if you ignore my post.
Thanks
I)ickie

[Tony]

P5B ehh, i will take a peak, in the maen time have a look at the vreg for the vdimm, it may already be maxed out and nothing but a hard mod will get you what you need.

[PowerToTheUsers]

Hi!

Please take a look at bios for Asrock 775dual-VSTA Click (http://download.asrock.com/bios/775/775Dual-VSTA(1.70).zip)


²

Although 1.80 is out now: http://download.asrock.com/bios/775/775Dual-VSTA(1.80).zip