DFI LANPARTY DK X58-T3eH6 Stress Results

[Venom-Crusher]

http://img.lanparty.tw/Upload/CatalogElement/DKX58T3eH6b.jpg

SYSTEMS
CPU : Intel® Core™ i7 920 Rev. D0
Mainboard : DFI LANPARTY DK X58-T3eH6
Memory : G.Skill Trident PC12800 6-7-6-18 2GB*3 Triple Channel
Graphic Card : INNO3D GTX295
Harddisk : Seagate Barracuda 7200.11 500GB
CPU Cooler : Water Cooling (EK Supreme ,Swiftech MCP655 ,Swiftech MCR320) Ambient ~22 C
Power Supply : Seasonic 850W
Operation System : Windows XP 32-bit

http://valid.canardpc.com/show_oc.php?id=604026


http://www.vmodtech.com/spaw/images/Venom-5/v-225.png

Stabilities Test @ 4,277MHz BClk 225MHz UncoreClk 4,052MHz

Prime95 Blend Mode 1024K ,8K ,10K ,896K & 768K pass in 1 round (~1hour 23minutes)

http://www.vmodtech.com/spaw/images/Venom-5/Prime-225-1.png


http://www.vmodtech.com/spaw/images/Venom-5/Prime-225-2.png

OCCT 3.1.0 CPU Test 1hour -Mode : Medium Data Set - Priority : NORMAL - 8 threads

http://www.vmodtech.com/spaw/images/Venom-5/occt-225.png

http://www.vmodtech.com/spaw/images/Venom-5/CPU1.png

http://www.vmodtech.com/spaw/images/Venom-5/CPU2.png

http://www.vmodtech.com/spaw/images/Venom-5/CPU3.png

http://www.vmodtech.com/spaw/images/Venom-5/CPU4.png

http://www.vmodtech.com/spaw/images/Venom-5/VCore.png

LinX 0.5.9 Default Test

http://www.vmodtech.com/spaw/images/Venom-5/LinX-225.png

Thanks for watch my threads. :)

[Infa]

Good testing :) I made the misstake to get a UD5 instead of this, stupid, allways wanted to play with a DFI board...still i dont buy one.. :(

[Garrett]

I'll have it up and running next week, have to do some other things first... but what bios is this?
Care to share some settings? ;)

Also, can it do more than 225 BCLK?

-edit-
Here's the custom PWM waterblock Duniek made for this board :up:
http://img515.imageshack.us/img515/3505/56752325.jpg

[over@locker886]

Did you get any performance improve from 0501 bios? I see you use 0701..

I have same mobo @ 228bclk for valid on air, and 252bclk was max under dice.

[ViViD]

Great Stability

Could U Go For Max FSB In This Mobo?

[Garrett]

Hi over@locker886, I suppose the BCLK doesn't go higher when putting the NB under low temps right?
It's purely a cpu thing if I'm not mistaking? ( correct me if I'm wrong! )

[over@locker886]

Hi over@locker886, I suppose the BCLK doesn't go higher when putting the NB under low temps right?
It's purely a cpu thing if I'm not mistaking? ( correct me if I'm wrong! )

I don't think so, but I don't tried yet

I used DI only on CPU, and stock cooling on NB.;)

[over@locker886]

It seems new beta bios is good;)

Superpi 32M running at 230 bclk on air.. :D

http://img299.imageshack.us/img299/470/230bclk32mairmsolata.th.jpg (http://img299.imageshack.us/i/230bclk32mairmsolata.jpg/)

[kitfit1]

I don't want to pour scorn on your work Venom-Crusher, but an hour of Prime and OCCT with Linx only using 772MB of ram, is not what i would call stable. If you wan't to show at least cpu stability, then run 20 rounds of Linx using ALL ram. Which should be anything between 4500MB and 5000MB of ram.

Still, a nice clock though.

[Garrett]

It seems new beta bios is good;)

Superpi 32M running at 230 bclk on air.. :D

http://img299.imageshack.us/img299/470/230bclk32mairmsolata.th.jpg (http://img299.imageshack.us/i/230bclk32mairmsolata.jpg/)

Nice stuff... makes me more excited, think there's more BCLK in there?
Keep it up :up:

[over@locker886]

Nice stuff... makes me more excited, think there's more BCLK in there?
Keep it up :up:

Yes, max bclk 236 on air with qpi slow mode and 225 maximum with fast mode.:up:

[Garrett]

slow mode and fast mode... hmm interesting, any differences noticed while benching with slow and fast?

[over@locker886]

slow mode and fast mode... hmm interesting, any differences noticed while benching with slow and fast?

No difference in 2d benches, but we lost performance in 3d a lot. :(