Max. FSB with 2x 512MB BH-5 on 8RDA+ ?

[z1erer [HWLuxx]]

Hi,

my system:

Athlon XP 1700+ @ 200x11
EPoX 8RDA+ 1.1 - VDD-mod @ 1,76V
2x 512MB PC3200 Twinmos/winbond BH-5

CPU, NB, SB Watercooled!

I look for another resistor for 1,9-2Vdd
I can set the vddr up to 2,9V - do you think i have to make a Mod for more then 3V ?

Did someone operate these memory also over 200MHz FSB on a NF2?
If, with which VDD and which VDDR?

I have build a FET-Watercooler, but i haven't mounted it yet

[STEvil]

should be able to make 200mhz easy, I can run up to 225 (but not stable) at 1.57vdd and 3.15v mem (BH-6).

[z1erer [HWLuxx]]

i have two BH-5 in dual channel...

[z1erer [HWLuxx]]

does nobody have 2xBH-5 on nF2?

[faruquehabib]

i have 2x256 mushkin black lvl 2 pc3500 that is bh-5. i topped out at 230, but it was due to my cpu, so i am getting a new one

[saaya]

one stick of bh5 only 245 2-2-2 with 3.3v

[Try-this]

Originally posted by tH3_b4iT
does nobody have 2xBH-5 on nF2?


Hopefully I'll get mine tomorrow, that is: 2*256 mushkin black lvl 2 pc3500 :cool:

[xDUCK]

My Corsair TwinX3200LL (2x256mb) can do 262FSB 1:1 CPU Interface Enabled 2-2-2-7 (faster for me than TRAS 11) on my NF7-S. Memory is at 3.44v for that and VDD is at 2.1v.

For my 24/7, though, I run 250FSBx10 2-2-2-7, 3.26v/2.0v.:banana: :toast:

[z1erer [HWLuxx]]

is it correct that 2x256MB are better to over clocks than 2x512?

[STEvil]

Gernallly speaking, yes.

[ctgilles]

2.15V on the northbridge with a modded XP cooler @ 235MHz 2-5-2-2 :D
This was one of the first that were out :)

//edit: those were 2x 512MB Corsair XMS3500 BH-5 @ 2.9V (no vddr mods)