View Full Version : OC my proc!
jmg823
11-16-2003, 10:53 AM
anyone know where i can get a program to OC my proc with? i can find any that are compatible with this mobo
thats some old msi,dont you know its model name?
faruquehabib
11-16-2003, 11:00 AM
http://www.computerhq.com/hardware/partinfo-id-1800.html
Tedinde
11-16-2003, 11:08 AM
I've got one of those boards in the closet. Man MSI sucked!!!
You cant clock it up at all in the BIOS???
If you can't change the multi's you may not get far. I have an old A7V (KT133 based) that they put the shottiest clockgenerator on. Has a super hard time running over 110fsb.
I was just looking at the manual for K7T pro 2, (could not find Turbo 2) and if they are similar you do have a multiplier adjustment in the bios under frequency/voltage control. If it's there go on step at a time (starting at 8x) and see what that chip can do. Some of those athlons were good overclockers, i would not be suprised if you can get it up over 1ghz with default voltage.
lalPOOO
11-16-2003, 01:17 PM
GJ, the model name is MS-6330
The only thing I can think that would maybe let you overclock is changing the DRAM TIMING in the bois. It might also change the cpu fsb. Even if it doesn't your ram running faster will probably help you.
jmg823
11-16-2003, 02:42 PM
Originally posted by Tedinde
I've got one of those boards in the closet. Man MSI sucked!!!
You cant clock it up at all in the BIOS???
nope EVERYTHING'S LOCKED
Tedinde
11-16-2003, 02:58 PM
Some of these were locked on the original bios. have your flashed to the newest??
jmg823
11-16-2003, 03:29 PM
no
pik-ard v1.1
11-16-2003, 03:55 PM
i have the same motherboard.
take a look at my cpu-z, and saying as i can overclock, the bios... im assuming it would work, as its the same motherboard number.
http://members.lycos.co.uk/pikardv1/hpbimg/cpu-zmo.JPG
lalPOOO
11-16-2003, 09:11 PM
If everythings locked, just flash to a new bios and you should be set. Just don't mess it up ;P
pik-ard v1.1
11-17-2003, 12:40 PM
if you can find my bios... its what came with my board... so i dont know if its downloadable...
deerhunter
11-17-2003, 01:43 PM
Originally posted by jmg823
anyone know where i can get a program to OC my proc with? i can find any that are compatible with this mobo
you can try increasing the fsb with speedfan sft.
Scroll down on the page below for the download.
get it here (http://www.almico.com/speedfan.php)
jmg823,
Please open the computer and get the model number and revision number from the motherboard. With those you'll be able to locate the newest proper bios which should make-your-day. MSI should have all the info on flashing it if you haven't done it before.
jmg823
11-17-2003, 01:56 PM
i will do it. can u tell me where this info is or does it differ from mobo to mobo?
From the pictures i've seen, it's under the 2nd PCI slot.
jmg823
11-17-2003, 02:11 PM
ok well i cant get it yet cause im at my grandmas house and i have basketball later tonite what sucks is that i might not get it for a week or two
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.