View Full Version : Hunting 2nd place 3DMark 2006!
Bought myself a 4890 yesterday, after seeing the GREAT scores Andre made with them. I borrowed 2 other cards from my work also.. so testing 3DMark 2006 with Xfire was my one priority :)
Seems like my cards dont like over 1000Mhz mem, I loose about 30fps in deep freeze.. anyone know something about that? Pretty easy running in the beginning, breaking the Xeon cpu in... ;)
Rig used:
Intel Xeon W3540
EVGA Classified E759 (seems like the NF200 chip works okey)
ASUS 4890 x 3 Stock Cooling
Kingston 2000Mhz 9-9-9-24
Corsair HX1000
Cascade Cooling on cpu -85C in cpu tests
Hoping for even higher scores later, will be testing a while.. Need to get some LN2 for this cpu, 5.3Ghz++ is possible.
Really want to thank www.digitalimpuls.no for the cards ;)
http://www.diskusjon.no/index.php?act=attach&type=post&id=302824
http://www.diskusjon.no/index.php?act=attach&type=post&id=302829
I want to take the germans down, they invaded us in WWII :D
clem9
05-24-2009, 12:10 PM
oh cmon dont start talkin bout ww2, its about overclockin!
anyway, nice results :D
keep on pushing
Kabauterman
05-24-2009, 12:17 PM
nice scores man! but WW2 wasn't our time ;)
hehe, just a reason to take them down :) ofcourse I dont care about WWII.. ;)
AndreYang
05-24-2009, 01:11 PM
I don't think it's 2nd place. You just need to check hwbot. If driver approved, it would see a lot of people results on ORB.
[XC] gomeler
05-24-2009, 01:39 PM
Nice score, 59 points higher than mine. Guess I'll have to put my 4870x2s under chilled liquid :D RV770 will slap around RV790 if I have my way with it :cool: Can't wait to see what you can pull with that CPU under LN2!
LardArse
05-24-2009, 04:50 PM
good stuff, seems like 2k6 / 2k5 just got a level up of 1-2k ~ this period.
I tried a pcie riser on the third slot for a fourth card and could quad fire them, basically connect third card (on a riser) to 1st card to second card to fourth card. So in windows you connect moinitor to either third card or fourth card (start or end of the chain).
of course you need to switch monitor to first card if wanna see in DOS :)
Though the GT1/2 may suffer a bit in 4 cards - seemingly bit more calculations for cpu to do
LowRun
05-24-2009, 06:03 PM
Bought myself a 4890 yesterday, after seeing the GREAT scores Andre made with them. I borrowed 2 other cards from my work also.. so testing 3DMark 2006 with Xfire was my one priority :)
Seems like my cards dont like over 1000Mhz mem, I loose about 30fps in deep freeze.. anyone know something about that? Pretty easy running in the beginning, breaking the Xeon cpu in... ;)
Rig used:
Intel Xeon W3540
EVGA Classified E759 (seems like the NF200 chip works okey)
ASUS 4890 x 3 Stock Cooling
Kingston 2000Mhz 9-9-9-24
Corsair HX1000
Cascade Cooling on cpu -85C in cpu tests
Hoping for even higher scores later, will be testing a while.. Need to get some LN2 for this cpu, 5.3Ghz++ is possible.
Really want to thank www.digitalimpuls.no for the cards ;)
http://www.diskusjon.no/index.php?act=attach&type=post&id=302824
http://www.diskusjon.no/index.php?act=attach&type=post&id=302829
I want to take the germans down, they invaded us in WWII :D
As i posted here: http://www.xtremesystems.org/forums/showpost.php?p=3745498&postcount=12 already.
I heard GDDR5 has data recovery and signal resynch mechanisms that would be triggered by too high of a OC resulting in decreased perf but without visual glitches to notice. Maybe this is what you are witnessing there.
Sampsa
05-25-2009, 03:45 AM
Congrats, although you took the #1 in Futuremark's competition (Europe region) away from me :toast:
http://www.futuremark.com/community/competitions/overclocking/regional09/
Nice 2K6 :) I ordered same VGA ... Tri CrossfireX of 4890 seems to be faster than 2 4870X2.
Kabauterman
05-25-2009, 05:06 AM
Nice 2K6 :) I ordered same VGA ... Tri CrossfireX of 4890 seems to be faster than 2 4870X2.
Sure :up: and It is easyer to LN2 them ;)
perkam
05-25-2009, 05:21 AM
Congrats, although you took the #1 in Futuremark's competition (Europe region) away from me :toast:
http://www.futuremark.com/community/competitions/overclocking/regional09/Aww, I'm sure you don't mind Sampsa.
The first prize in that competition is a P45 motheboard :rofl: :ROTF:
Perkam
yeah, I saw that I was in front in Europe atm.. hmm, maybe I win the MSI x58 week prize..? :D
Congrats man great score there :up:
Congrats, although you took the #1 in Futuremark's competition (Europe region) away from me :toast:
http://www.futuremark.com/community/competitions/overclocking/regional09/
wierd, did I submut to late? I didnt win...
Sampsa
05-26-2009, 07:17 AM
wierd, did I submut to late? I didnt win...
weird.. looks like I'm the winner of week 1 :shrug: Funny thing is that I didn't even know this competition exist.
pushing the gfxs now, cpu bottlenecked..? :D
http://www.diskusjon.no/index.php?act=attach&type=post&id=303197
k|ngp|n
05-26-2009, 11:25 AM
Nice job haak! :D
dan7777
05-26-2009, 11:26 AM
pushing the gfxs now, cpu bottlenecked..? :D
http://www.diskusjon.no/index.php?act=attach&type=post&id=303197
40k ? lol :up:
Nice one DPA....bravo man....
working with LN2 now, having a hard time to break 230Mhz.. any tips..? should I buy some elpida chips..?
http://www.diskusjon.no/index.php?act=attach&type=post&id=303670
got that second place :)
http://www.diskusjon.no/index.php?act=attach&type=post&id=303713
http://www.diskusjon.no/index.php?act=attach&type=post&id=303710
http://www.futuremark.com/community/competitions/overclocking/regional09/
yoho :D
Bravo man...
You wanted it,you hunted it and you got...
Gautam
05-29-2009, 07:39 PM
Very nice...seems like Andre could be danger judging from your second pic :p:
G H Z
05-29-2009, 10:33 PM
got that second place :)
Looks like you found some nitro, smokin Xeon tri-fire action man :clap:
Fosco
05-29-2009, 11:30 PM
Nice work Haakon :up:
thanks crio, Gautam, GHZ and Fosco! means alot coming from you guys!
as you can see, iam behind Andre but on higher clocks.. must be:
759 vs his 760.. (nf200 littlebit slower)
memory, 9-9-9-24 vs his 7-8-7-18 timings
mem on gfxs, his running 1150. my cards just wont do that.. no matter what!
the rig is unstable as hell at -150C, 3dtest wont run at -150.. just random hang, but I need that temp for cpu tests at over 5.4Ghz..
so, I need new memory.. ;) with 7-8-7-18 timings, and a full run at 5.43Ghz I think 37500 is sealed :)
dinos22
05-30-2009, 02:16 AM
great benching from you as always
what uncore voltsa are you on mate?
sp weird not to see you benching '01 :D
AndreYang
05-30-2009, 03:34 PM
thanks crio, Gautam, GHZ and Fosco! means alot coming from you guys!
as you can see, iam behind Andre but on higher clocks.. must be:
759 vs his 760.. (nf200 littlebit slower)
memory, 9-9-9-24 vs his 7-8-7-18 timings
mem on gfxs, his running 1150. my cards just wont do that.. no matter what!
the rig is unstable as hell at -150C, 3dtest wont run at -150.. just random hang, but I need that temp for cpu tests at over 5.4Ghz..
so, I need new memory.. ;) with 7-8-7-18 timings, and a full run at 5.43Ghz I think 37500 is sealed :)
hey man.....memory timming doesn't matter with 3Ds.
5.43G+ is much higher.
I show you 5.41G
http://www.iamxtreme.net/andre/37689.JPG
I still try high gpu and high cpu right now. High 4890 speed will get more points than cpu.
NB volts at 1.3v
hmmm, need higher gpu and cpu clocks then. what kind of tool takes the 4890 cards over 1000Mhz core..?
I have 3 slim pots here, but hell to run with 4 pots :)
sofos1990
05-31-2009, 11:32 AM
I have 3 slim pots here, but hell to run with 4 pots :)
Use them!!!
Don't worry there are some guys who run sometimes with 5 pots:D(4870X2 CFX(4 pots) and 1 cpu pot:D)
need to find a overclocking tool for over 1000mhz core anyways, maybe rivatuner works with that?
pics:
http://www.diskusjon.no/index.php?act=attach&type=post&id=303718
http://www.diskusjon.no/index.php?act=attach&type=post&id=303720
http://www.diskusjon.no/index.php?act=attach&type=post&id=303721
I have two slim TEK 5.0, and one slim TEK 4.0 ;)
Will the 4890 do 1200Mhz on core..?
Awesome runs DPA!
hey man.....memory timming doesn't matter with 3Ds.
5.43G+ is much higher.
I show you 5.41G
I still try high gpu and high cpu right now. High 4890 speed will get more points than cpu.
Memory timing don't matter in 06??? Maybe that's why your scores are so low in 06 :p:
AOCTeam
06-06-2009, 06:00 AM
Nice, waithing for your Quad 4890 score!
Hope u will set som personal or even better world records
http://www.diskusjon.no/index.php?act=attach&type=post&id=305174
http://www.diskusjon.no/index.php?act=attach&type=post&id=305175
http://www.diskusjon.no/index.php?act=attach&type=post&id=305176
testing with 4 cards on monday ;)
AndreYang
06-06-2009, 06:26 AM
haha...don't steal my idea.
Ill race you.... you little.. :D
just kidding, mounting fourth pot later today, then going out to be drunk (again).
Hifiking will assist me on monday benching with 5 pots :D
mohahaha? :D
http://www.diskusjon.no/index.php?act=attach&type=post&id=305297
http://www.diskusjon.no/index.php?act=attach&type=post&id=305298
DEVIL K-ce
06-06-2009, 11:22 AM
Can We look score at cpu @ air and gpu @ ln2/di ? Or We must whait when You will be bench full ln2 setup :)
Go Europe go ... :up:
Regards
Martin
Can We look score at cpu @ air and gpu @ ln2/di ? Or We must whait when You will be bench full ln2 setup :)
Go Europe go ... :up:
Regards
Martin
Guess hes out drunk now:p:
Better wait until tomorrow.... gotta love the pics in post #38:D
AWESOME
Go get em Haakon--
Cheers
[XC] gomeler
06-06-2009, 06:14 PM
Sick ;) Been waiting for somebody to put these GPUs under dry ice or LN2. 1200/1200 through 06? :D
dany74q
06-07-2009, 10:29 AM
WOW! I love it :bow:
Try this following new updates for 3dmarks,maybe it will give some extra points-
http://www.futuremark.com/benchmarks/updates0609/
Good luck!
Awesome 4-way 4890 setup! :D Looking forward to see the results.
AOCTeam
06-08-2009, 11:18 AM
When do we see the results from today :D?
LeglesSs
06-10-2009, 08:00 PM
That's an amazing set up awesome work, i bet scores incredibly high. :)
the rig didnt want to work with us AT ALL.. after changing to dominator GT sticks the cpu dont want to go over 5250Mhz.. Kinc gave me some tips yesterday, will try them out.. 4 cards on air first - then 4 cards on LN2.
Don't bother yourself with LN2 on cards ;)
Too bad, that it didn't go well on that last try.
Don't bother yourself with LN2 on cards ;)
Too bad, that it didn't go well on that last try.
LN2 on cards will gain maybe 200-400 points. cards run 1100 core easy, will do it AFTER my cpu is back on track. :)