you know how i do...920 D0 + EVGA Classified = sub 7 min 32M + 100% OC

[3oh6]

i'll let the other guys shoot the moon on BCLK, i am just interested in one thing and one thing only...those of you that know me know what i am talking about.

here is the setup: Intel i7 920 D0 - 3845B026
MMouse Rev3 CU pot w/LN2
EVGA X58 3X SLI Classified - Stock cooling
Corsair Dominator-GT 3x2GB PC3-1866 7-8-7
ATI Mach64 PCI
Corsair HX1000W
3 x Ultra Kaze 2000RPM

start with the updates then the old stuff...mmm, 5.3GHz 32M 920 :D

and what a weekend it was. i didn't get a chance to do a whole lot of benching but i did show the lads there my latest with this crazy little 920. nothing like 5.3GHz 32M with a 920 :D

http://3oh6.com/forum_posted/reviews/memory/blade_pc316000/32m_5299-1.png

it is just too bad my 975 wasn't as good as this multiplier challenged 920.

first off is my max validation, but like i said, it wasn't my main concern. i simply wanted 250BCLK and pretty much quit when i got it.

http://valid.canardpc.com/show_oc.php?id=557386

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/cpu-z_5278-1.png

then i toyed with a little 1M action...

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/1m_5216-1.png

and finally had a couple cracks at 32M. i was checking for max clocks and not pushing memory so there is still room for improvement but after only just cracking 7 mins with my 965 not to long ago, crushing that time with a 920 was quite fun.

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/32m_5195-1.png

then my time was up and i had to head back to the hospital again for another shot in the chest. the good news there is that i should be healthy again in a few days...no thanks to you Chris, although it turns out you weren't completely to blame ;)

***update with results from post on third page***

oh, and just so you guys don't waste your time...cold on the north bridge doesn't help BCLK ;)

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/_MG_2353.jpg

sure feels badass with the NB at -40C though :D

updated CPU-Z @ 5320MHz - 253BCLK (http://valid.canardpc.com/show_oc.php?id=558936)...100% overclock if i am not mistaken :up:

and a quick update on 32M as well with one higher BCLK. played with voltages for 10 minutes and got 1 more BCLK consistently stable for CPU-Z, 1M, and 32M.

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/32m_5215-1.png

haha, best part is the HWBot points :devil:

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/Untitled-1.png

another update with 06 at almost 5.2GHz...


i try to ignore you as best i can Ron, but i would never snub you :D

10K looks like it is 5 miles away at this point, but i did get the GTX 295 running with high CPU clocks and squeezed a pinch more out of the CPU. i had a 5200MHz + run down to deep freeze when i got a reboot 3/4 of the way through :brick:

either way, this is the best 06 i've managed so far...

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/06_5194_7-8-7_32570-1.png

now nap time...

[Splave]

wow very impressive stuff, IOH pll @ 1.5? lower than stock?
What did you use for max mem. I bet you have sub 6.50 in ya ;)

[JamesBong420]

:eek: <------ says it all!!!!! good job!!:yepp::up::p::cool:

cannot wait for a D0 in my neck of the woods.. :D

[Bullet92]

Classified + D0 are kicking asses just like you with 32M. Expecting some serious tweaking next time ;)

Nice job :up:

[Zucker2k]

:shock: 252 BCLK, and you weren't even trying? I'm going to start collecting cans, I need that board.

[scooter.jay]

Nice time man well done:up: Look forward to you pushing further some good clock coming from these boards:shocked:

[Oliver]

hey Jody , thx for posting

once again great work :up:

keep recovering it

[3oh6]

thanks guys, and yup, this board is just that easy with the right CPU.


keep recovering it
thanks boss...after last night, i am well on my way to being back to 100% very soon :up:

[Hyperhorn]

Good choice of benchmarks, very good choice. ;)

Congrats!

[rambler358]

i simply wanted 250BCLK and pretty much quit when i got it.
Fantastic job! :yepp:

LN2 ?

[over@locker886]

Amazing! :shocked:

Impressive job Jody! Congrats!

[posershadow]

Wow, sub 7min on a 920. Definitely sets a new bar for the competition. I'd like to see this with some of the gskill perfect storm kits that hiwa showed. What tweaks you using?

[eva2000]

sweet Jody congrats! how does the board fair with C0 stepping cpus interms of bclk.. C0 vs D0 how much difference ?

Get well soon!

[3oh6]

Good choice of benchmarks, very good choice. ;)

Congrats!
thanks, is there any other benchmarks worth running??? :D


Amazing! :shocked:

Impressive job Jody! Congrats!
thanks buddy, more left from this setup in memory timings but i can hopefully squeeze out another BCLK or two with some fine voltage adjustments.


Fantastic job! :yepp:

LN2 ?
yup, forgot to put that in, just added it now. temps were only -55C ~ -60C for this run though. any colder didn't help as it is BCLK limited. i can bench at -90C with this chip and boot as cold as -125C before i get cold boot issues.


What tweaks you using?
tweaks aren't a good term, makes it sound like pushing buttons. i run a well tuned and prepped OS with all the basic processes to improve SPi, nothing fancy. i've posted my processes too many times to repeat but the information is out there.


sweet Jody congrats! how does the board fair with C0 stepping cpus interms of bclk.. C0 vs D0 how much difference ?

Get well soon!
come on George, you know you can't ask a blanket question like that, it all depends on the CPU :)

the 965 C0 i have right now hates BCLK. 206~209 is all it will do on air on any board. under cold that goes up to about 225~230ish. it is the only chip aside from this 920 that i have used since getting the Classified.

this little bastard is prime stable at 215BCLK on air in the Rampage Gene without trying. I haven't had it on the Classified on air yet, this session last night was the first time they met. it is my first D0 so i have nothing to compare it too, and i didn't have this board since the last time i had a decent BCLK'ing C0. so really, i don't have a whole lot of info.

and thanks, already on the road to recovery :up:

[k|ngp|n]

SICK SICK SICK :up:

[Oliver]

thanks boss...after last night, i am well on my way to being back to 100% very soon :up:
your welcome and ehe

will look forward to when your back 100% benching , so the 3d damage will come :up:

[3oh6]

SICK SICK SICK :up:
there he is, fire up the barb-E, me and the geeks is coming over for some fun later this month :up:

[Raja@ASUS]

Some pretty nice clocking. Looks like your chip loves VTT Jody..

[Splave]

any insight on the IOH PLL vcore? Sorry if you are ignoring me :) you dont have to answer

[k|ngp|n]

there he is, fire up the barb-E, me and the geeks is coming over for some fun later this month :up:

Thats what I hear. Another EVGA launch party eh? Cool..

[3oh6]

Some pretty nice clocking. Looks like your chip loves VTT Jody..
i forgot i had it that high. on air, this CPU won't run with anything over 1.45v...nothing higher will POST or run after changing in Windows. it was one of the things i wanted to check to see how cold affected it, turns out it can handle VTT at sub-zero temps. i guess i forgot to lower it when i started running.


any insight on the IOH PLL vcore? Sorry if you are ignoring me :) you dont have to answer
sorry, didn't think you were actually asking a question since the screen shot covers it, but yes, running at 1.5v. the voltages in the screens might not need to be set as high as they are either, i didn't really play around due to time restriction. normally i run this board with both IOH and CPU PLL at 1.5v. never found a benefit over that on air. i was messing with these during my short BCLK hunting but plenty of work to go i think.


Thats what I hear. Another EVGA launch party eh? Cool..
yeah, i'll fire you a PM shortly.

[Pedro Rocha]

Congrats ..impressive achievement..:clap:

EVGA Classified sure is a fantastic motherboard a really masterpiece :yepp:

[Splave]

thanks! :up:

[Vivi]

Thats what im talking about Jody! Keep up the awesome benching! 7.75 5.2+ on 920.. WOW

[3oh6]

Congrats ..impressive achievement..:clap:

EVGA Classified sure is a fantastic motherboard a really masterpiece :yepp:
thanks Pedro, these Classifieds sure are nice. it will just be interesting to see what some other boards do with these chips, or if the Classified really is the king.


thanks! :up:
no problem.


Thats what im talking about Jody! Keep up the awesome benching! 7.75 5.2+ on 920.. WOW
haha, says the guy absolutely crushing any record within arms reach of a killer E8600. you keep up that E8600 onslaught and i'll keep this 920 benching going :up:

[bluto]

Wow, I knew it was gonna be you to first go sub 7 min on the 920:shocked:.

[Gautam]

I see someone's not so sick anymore. :D

[3oh6]

I see someone's not so sick anymore. :D
drugs are a beautiful thing for 2 hour spurts...and the session was part of my treatment i'll have you know. the docs wanted a couple hours of light activity like cleaning or something then to come back for more x-rays and tests. yeah, i think i found something just a little bit better than cleaning the house for light activity...tipping a 30L dewar ;)

[hiwa]

Damn nice 920 and crazy classi :D
congrats for 32m :up::up:

[Viss]

Very nice Jody :yepp: get wel soon, most important thing for sure :up:

[SAE]

Way to go, Jody. Those bclk records with the classified seem to reach more and more unbelievable heights. :up:
/edit. Not only validated records, but benches at these kinda clocks are extraordinarily great...

And I have to second loc.o above^^ ...get well soon. :)

[Perica_Barii]

great cpu .......
:clap::clap:

[Planet]

I am still waiting to see your delivery truck for ln2

[gandalfone]

always high clock 3oh6:clap:

[3oh6]

thanks guys, still plenty in her. well, maybe not plenty but definitely something. i am sitting on my rump to watch hockey and basketball the rest of the night, so i should be ready to roll soon.

I am still waiting to see your delivery truck for ln2
sorry boss, i forgot...here she is. thank goodness i filled this dewar right before i left, like i knew i was going to come home feeling like ass...

http://img.photobucket.com/albums/v220/3oh6/ocx/ln2_transport-1.jpg

that's right, you all want a pedal powered LN2 delivery system...don't deny it :D

[gaidin]

amazing results 3oh6...sub 7min on 920 :clap::clap:

love the delivery system also!

[posershadow]

Good thing you got it filled before gomeler diseased you... That would be a rough ride to make sick, especially once filled.

[dinos22]

maaan these boards are just SICK bro

love the fact you torture it with the same test i do
32M SuperPi :D hahahah

there is no bench like a 32M SPi :D

i'm assuming it's the lack of ratios on NB that forces you to run it that low
thanks guys, still plenty in her. well, maybe not plenty but definitely something. i am sitting on my rump to watch hockey and basketball the rest of the night, so i should be ready to roll soon.

sorry boss, i forgot...here she is. thank goodness i filled this dewar right before i left, like i knew i was going to come home feeling like ass...

http://img.photobucket.com/albums/v220/3oh6/ocx/ln2_transport-1.jpg

that's right, you all want a pedal powered LN2 delivery system...don't deny it :D
:rofl::rofl::rofl::rofl::rofl::rofl::rofl::rofl::r ofl::rofl::rofl:

[carpo93]

thanks guys, still plenty in her. well, maybe not plenty but definitely something. i am sitting on my rump to watch hockey and basketball the rest of the night, so i should be ready to roll soon.

sorry boss, i forgot...here she is. thank goodness i filled this dewar right before i left, like i knew i was going to come home feeling like ass...

http://img.photobucket.com/albums/v220/3oh6/ocx/ln2_transport-1.jpg

that's right, you all want a pedal powered LN2 delivery system...don't deny it :D

:rofl::up:

[Vivi]

thats what i was talking about in my thread ! :D. That is a legit looking trailer aswel, im sure it also cost some money!. Thats benching spirit right there ;)

[Blue Storm]

very nice CPU:clap:

[3oh6]

there is no bench like a 32M SPi :D
you don't have to tell me man...it was all i wanted to do.


i'm assuming it's the lack of ratios on NB that forces you to run it that low
run what low? memory? uncore?


:rofl::rofl::rofl::rofl::rofl::rofl::rofl::rofl::r ofl::rofl::rofl:


:rofl:
why you guys laughing. i ride a bike for transportation, have for 10 years now. that bad boy has over 100K KM's on it easy. the trailer upgrade seemed the only natural choice when I got my dewar ;)

[OC4/3]

Wow.............Really impressive,seem like I7 920 D0 + EVGA Classified is a really nice rig ATM:clap:

[Brian y.]

Way to go Jody!:up:

I can see it now.....you riding down the street pulling your dewar along......in flip flops!:rofl:


Be careful the cops don't pull you over:rolleyes::p:

[3oh6]

Be careful the cops don't pull you over:rolleyes::p:
haha, real funny...and the damn cop didn't even call, i honestly thought she would :shrug:

[runmc]

Great job Jody - sub 6 is the nut on the Classy/DO combo :clap: - gotta go grab me a DO

[dinos22]

why do i laugh

that's the most bizarre shot i've seen in my life

have you heard that song from a NZ band > "How Bizarre (http://www.youtube.com/watch?v=mIvAXrce_gg)" :D

Jody i was referring to low NB speeds

[EnJoY]

Love it Jody. And I loved that shot of your ln2 mobile the first time I saw it and it just doesn't get old. Priceless! :up:

[3oh6]

thanks Ron.

i'm just bustin your balls Dino, of course its funny...its just how i roll. my trip for LN2 is only 13 kms round trip and they didn't like me transporting in a closed vehicle, i use to just borrow a friends car. so i beefed up the trailer and have been loving my $30 30L fills ever since. takes me 15-20 mins each way and it is all downhill on the way back :up:

i wasn't even looking for uncore clocks, i only had a short time to bench and just wanted to see what BCLK i could get 32M run at.

it sure doesn't Alex...more bizarre shots coming in a little bit :cool:

[dinos22]

oh me blushes
:p::D

definitely envious of this amazing QPI you guys are getting with these boards

i bought a D0 and will give an Extreme GBT board a shot i got recently
hoping to get more than 222MHz which was the limit on the UD5 i tested a while back

[Splave]

3oh6 what are you using as far as clock skew? Appreciate it :)

[3oh6]

3oh6 what are you using as far as clock skew? Appreciate it :)
800

@Dino, i had another quick session tonight to test a theory and in the process tried higher uncore...no dice. wouldn't even run 32M at the same clocks with one higher multi. even tried loosening up RTL quickly and that didn't help. i knew this uncore was crap on this processor but i didn't think it was this crap :shrug:

oh, and just so you guys don't waste your time...cold on the north bridge doesn't help BCLK ;)

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/_MG_2353.jpg

sure feels badass with the NB at -40C though :D

updated CPU-Z @ 5320MHz - 253BCLK (http://valid.canardpc.com/show_oc.php?id=558936)...100% overclock if i am not mistaken :up:

and a quick update on 32M as well with one higher BCLK. played with voltages for 10 minutes and got 1 more BCLK consistently stable for CPU-Z, 1M, and 32M.

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/32m_5215-1.png

haha, best part is the HWBot points :devil:

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/Untitled-1.png

[dinos22]

hahah evil score there dude pure evil :rofl:


hey arent some of the NB multies locked on the 920 even though you can select them in bios hence why you were probably unstable?!?

[carpo93]

so cold on nb don't helb blck

[3oh6]

hey arent some of the NB multies locked on the 920 even though you can select them in bios hence why you were probably unstable?!?
this i did not know...anyone with any confirmation on this? me being spoiled with 965's up to this point (:rolleyes:), i haven't spent any time with a 920.


so cold on nb don't helb blck
look at the results...clearly at this point, with this CPU and this board, cold on the NB didn't do anything. perhaps when i get voltages adjusted some more or on other boards it will...but at this point where i am, cold doesn't help. i wasn't expecting anything but one can always hope for a 5 BCLK boost by trying things ;)

[drnip]

You rock man, you *BLEEPING* rock!

[LockBreaker]

Anyone here clocking with the C1/C0 version? :)

Will I be able to get it to about 3.8-3.9 Ghz? :)

However; very, very impressing results! I'm deeply touched. :)

[Splave]

amazing 32m man, any reason your not on the latest bios? And are you using both 8 pins.

[chispy]

Wow , Jody :eek: insane cpu speed on that 920 , that board sure its a dream :up:. Keep pushing it bro.

chispy.

[3oh6]

thanks guys.


amazing 32m man, any reason your not on the latest bios? And are you using both 8 pins.
not really, just too lazy to update it i guess. seems to be working fine on this one, no? :D
yes, using both 8-pins for these runs.

[miahallen]

Jody, you're an animal :D

[dinos22]

this i did not know...anyone with any confirmation on this? me being spoiled with 965's up to this point (:rolleyes:), i haven't spent any time with a 920.


look at the results...clearly at this point, with this CPU and this board, cold on the NB didn't do anything. perhaps when i get voltages adjusted some more or on other boards it will...but at this point where i am, cold doesn't help. i wasn't expecting anything but one can always hope for a 5 BCLK boost by trying things ;)

yeah i noticed this after changing from my first 920 to 965

i found sweet spots on 920 like running 1:4 RAM to NB etc but when i got the 965 everything worked..........that was a WTF moment for me for sure

i am positive its not just the board but a CPU issue with some ratios blocked for locked chips

[[XC] gomeler]

getting the NB cold should do nothing for clocks, it is just a PCIe controller. Sick clocks man, Ive go D0 envy

[3oh6]

no animal...maybe a wounded dog. and thanks for the heads up Dino, will have to look into it some more.


gomeler;3769561']getting the NB cold should do nothing for clocks, it is just a PCIe controller. Sick clocks man, Ive go D0 envy
just like it didn't help the original EVGA X58, and raising that PCIe frequency doesn't help BCLKs either? :cool:

it's the only reason i grabbed a D0...damn D0 envy.

[dinos22]

i noticed Monstu bench with 5GHz+ NB so it's not out of the question to start whacking some serious VTT to the chip on cold :D

what BCKL are you booting at?

[filmbot]

Jody, what pot are you using on NB?

[3oh6]

i am booting at 220 Dino. never bothered trying any higher...seems to climb up fine from there with E-Leet.

the NB pot is one that DetroitAC made for me a while ago. i initially got it for my 790i boards but never got an E8600 to put it to use, figured i would give it a test run. it is nothing fancy, but man that NB puts out some heat, it really can bounce temps quickly.

[runmc]

Were you wearing your boxers or your briefs ?? :moon: :wasntme: Oh yeah - and where did you get the DO ?

[dinos22]

Were you wearing your boxers or your briefs ?? :moon: :wasntme: Oh yeah - and where did you get the DO ?

:rofl::rofl::rofl::rofl::rofl::rofl:

[Monstru]

Great results Jody, you have a killer chip there. Regarding the VTT voltage, mine was ~1.6v for the 5GHz Ucnore benches, maybe that might help. But one thing is for sure, much voltage over that value didn't give me anything extra.

[gaidin]

hmmm maybe I should upgrade my PSU and give the second 8pin 12V connector a go? Im running the Coolermaster 1kW modular now but its lacking the second one :down:

[3oh6]

Were you wearing your boxers or your briefs ?? :moon: :wasntme: Oh yeah - and where did you get the DO ?
Ron, Ron, Ron :shakes: always asking about what guys are wearing for underwear.

bought it locally from a shop across the street. he just happened to get a D0 a few weeks ago and i needed another chip to get started on multiple reviews...worked out nicely ;)


Great results Jody, you have a killer chip there. Regarding the VTT voltage, mine was ~1.6v for the 5GHz Ucnore benches, maybe that might help. But one thing is for sure, much voltage over that value didn't give me anything extra.
in the screen shots i was running 1.6v too. the guys at the GB comp found out that i don't bother running these i7's under LN2 at anything less :D

i quickly tried upping the NB ratio by a couple multi's but nothing would run at all. i just gave up and moved on. but now that Dino has said what he has, i will look into it a bit more. these last two runs have come in quick 60~90min sessions as i am pinched for time. i'll really sit down with this chip in a week or so and see what it has.

[etoo]

Who knows I7 920 D0 batch # 3850A796?

[hiwa]

Who knows I7 920 D0 batch # 3850A796?

one of the best batch ;)

congrats for nice 32m my prefer bench :D
tested 21/04 bios and pci video don't boot :(

[etoo]

one of the best batch ;)

congrats for nice 32m my prefer bench :D
tested 21/04 bios and pci video don't boot :(


you know how I will manage with this batch 24/7 ???

[3oh6]

well, i don't have time for all the 4 core fun this weekend but i did play for a bit. my gtx 295 was acting really weird at these clocks. perhaps it is on it's way out but i couldn't even run stock clocks at these CPU clocks. perhaps the board couldn't handle the 295 at this BCLK :shrug:

either way, stuck in a 9800GT and ran a couple 06's at what appears to be the max for this setup. will need to sit and tweak voltages later once my phase hold down comes back from LA. for now, 10K definitely looks within reach for a good 920 D0 :up:

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/06_5153_9800gt-1.png

[George_o/c]

Nice benchmarks Jody. :up: Can't wait to fire up Reinaissance with a D0 cpu and bench a bit SPi 32M :yepp:

Keep 'em coming man :up: I'm glad that every moment that passes you feel a bit more healthy ! :)

[runmc]

for now, 10K definitely looks within reach for a good 920 D0 :up:

10K what? :confused:

[Deux]

10K what? :confused:

3D06 CPU score I believe :)

[3oh6]

3D06 CPU score I believe :)
yeah, 10K CPU. should be do-able at what 252*21?

oh, and Ron, i'll get that OS to you soon. just doing some finishing touches on it.

[runmc]

yeah, 10K CPU. should be do-able at what 252*21?

oh, and Ron, I'll get that OS to you soon. just doing some finishing touches on it.

aahh :D and to think I thought you were snubbing me. Oh me of little faith. :yepp:
Thank you Jody.

10K cpu score would be an amazing feat :up: but I'm sure you will pull it off soon.

[Raja@ASUS]

Nice result Jody. I did not have this problem with the 4870X2. I have some GTX 280's here but have not tried them in SLI to create a more capacitive load on the PCI/e bus. Mind you, the load of the 4870x2 should not be too far off that of the 295.

[3oh6]

aahh :D and to think I thought you were snubbing me. Oh me of little faith. :yepp:
Thank you Jody.

10K cpu score would be an amazing feat :up: but I'm sure you will pull it off soon.
i try to ignore you as best i can Ron, but i would never snub you :D

10K looks like it is 5 miles away at this point, but i did get the GTX 295 running with high CPU clocks and squeezed a pinch more out of the CPU. i had a 5200MHz + run down to deep freeze when i got a reboot 3/4 of the way through :brick:

either way, this is the best 06 i've managed so far...

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/06_5194_7-8-7_32570-1.png

now nap time...

[Trouffman]

wahou : impressive ! Keep pusking ;)

[pepinorang]

Great scores and really great efficiency, keep pushing it !

Bye
p€p|n0r@ng

[LardArse]

man that 920's a keeper, is it really temp sensitive at that speed, or you have a big range to play with?

[3oh6]

man that 920's a keeper, is it really temp sensitive at that speed, or you have a big range to play with?
it seemed to be. i run with a MMouse Rev3 pot so temp swing for CPU tests is quite the art form to deal with at these clocks. i basically had to hold pot temp between -75C and -80C for 3D tests (random drop outs occured colder than -80C), then get the pot temp down to -85C for the start of CPU to keep temps down for the swing...hit the pot with some heat at the end of CPU to keep from cracking -80C and back into 3D.

i was having such good luck at that temp range that i just stayed there. the chip can idle in Windows at -130C but SPi load would freeze the system instantly at anything below -85C. not really sure how colder worked with 3D as i stayed above stated temps.

[LardArse]

yea the higher the load with these cpus the smaller the range of temp

[tajoh111]

Congrats Jody, loads of memory or not, it takes talent to do something first. And these half budget half extreme are what I like best.

On an unrelated note Shamino, Vr-zone forums is like the jungle, I went there a bit after xtremesystems was down and I can tell you, I came back with cuts and bruises. The amount of trolling, personal attacks and bashing is ridiculous in the news section.

[chispy]

Great going Jody :up: , i like the way you work your magic on that Classified board. Kepp pushing it bro , i feel theres more on that cpu :yepp:.

Angelo.

[3oh6]

Great going Jody :up: , i like the way you work your magic on that Classified board. Kepp pushing it bro , i feel theres more on that cpu :yepp:.

Angelo.
i don't know Angelo...i have a hunch yours is going to have more in it on this board :D

[chispy]

i don't know Angelo...i have a hunch yours is going to have more in it on this board :D
Ohh let the Mighty Gods of overclocking hear you bro :D , hopefully we will find out soon.


Angelo.

[[XC] gomeler]

Bang up job Jody! No need to buy a 975, just keep clocking that toy of a CPU. Get that 295 on LN2 asap :up:

[runmc]

I like the "Totem Pole" insulation on the NB Jody :D Are you feeling any better?
It reminds me of how I insulated a waterblock with a TEC on it. I glued it all together with silicone gasket adhesive.:ROTF: It worked!!

http://img.photobucket.com/albums/v220/3oh6/ocx/classified/_MG_2353.jpg

[G H Z]

either way, this is the best 06 i've managed so far...

Nicely done :clap:

[3oh6]

gomeler;3790387']Bang up job Jody! No need to buy a 975, just keep clocking that toy of a CPU. Get that 295 on LN2 asap :up:
but i still want a 975 :D


I like the "Totem Pole" insulation on the NB Jody :D Are you feeling any better?
It reminds me of how I insulated a waterblock with a TEC on it. I glued it all together with silicone gasket adhesive.:ROTF: It worked!!
yeah Ron, i wanted to just use Armaflex tape but it was still in a box coming back from LA...so i improvised. seemed to work pretty good, pot never got colder than -40C though so it wasn't much of a test.


Nicely done :clap:
thanks Ron...i've got the big guns getting lined up for some real 3D ownage with this setup :rolleyes: (you'll understand the rolling eyes when i post results)

[eligray]

Happy 1337th post 3oh6! :)

[Brian y.]

but i still want a 975 :D


I sell you mine for a price you can't refuse......:D

just be sure to include those blade sticks you are holding hostage:p:

[3oh6]

I sell you mine for a price you can't refuse......:D

just be sure to include those blade sticks you are holding hostage:p:
you wish...well, i actually wish i had another kit as good as the Blades, because then we would have a deal ;)

[runmc]

yeah, 10K CPU. should be do-able at what 252*21?

oh, and Ron, i'll get that OS to you soon. just doing some finishing touches on it.

:yepp:Soon Jody Soon (http://valid.canardpc.com/show_oc.php?id=570460) :worship::worship::worship:

[eligray]

Wow Ron! 253 * 21 :)

What're your 3D benchable speeds? do you know yet?

[George_o/c]

Hehe, nice one Ron :up: Jody can't wait for you to push hard on 3Ds ... Will you re-bench that horny little green card (7600GS) ? :D

[gaidin]

my team mates at the bench party next weekend are very lucky to have you coming along for moral support 3oh6 :D

your knowledge with i7 and the Classified will be invaluable!

[3oh6]

my team mates at the bench party next weekend are very lucky to have you coming along for moral support 3oh6 :D

your knowledge with i7 and the Classified will be invaluable!
and what a weekend it was. i didn't get a chance to do a whole lot of benching but i did show the lads there my latest with this crazy little 920. nothing like 5.3GHz 32M with a 920 :D

http://3oh6.com/forum_posted/reviews/memory/blade_pc316000/32m_5299-1.png

it is just too bad my 975 wasn't as good as this multiplier challenged 920.

[Gautam]

What's really too bad is that your uncore is so low ;) :lol:

[3oh6]

What's really too bad is that your uncore is so low ;) :lol:
looks like Dino has a competitor for getting the uncore shots in early :)
updated my profile name to reflect my new handicap :up:

***edit***
there, is this better...

http://3oh6.com/forum_posted/reviews/memory/blade_pc316000/32m_5299-2.png

[Viss]

Insane bclk for 32m :up:

[over@locker886]

and what a weekend it was. i didn't get a chance to do a whole lot of benching but i did show the lads there my latest with this crazy little 920. nothing like 5.3GHz 32M with a 920 :D

http://3oh6.com/forum_posted/reviews/memory/blade_pc316000/32m_5299-1.png

it is just too bad my 975 wasn't as good as this multiplier challenged 920.

yeez, fantastic score bro! :up:

How cold was cpu?

[Afrokalle]

Wow !!

what a fantastic 32M run :worship:

[miahallen]

What's really too bad is that your uncore is so low ;) :lol:


looks like Dino has a competitor for getting the uncore shots in early :)
updated my profile name to reflect my new handicap :up:


:rofl: I love it :up: :rofl:

[3oh6]

:rofl: I love it :up: :rofl:
you should see these guys beat me up on messenger over the bloody uncore :D

[[XC] gomeler]

Man, that is the 920 from hell, striking fear in the hearts of 975 owners everywhere.


looks like Dino has a competitor for getting the uncore shots in early :)
updated my profile name to reflect my new handicap :up:

***edit***
there, is this better...

http://3oh6.com/forum_posted/reviews/memory/blade_pc316000/32m_5299-2.png

your leet photoshop skills rock :D

[dinos22]

son of a *********** :D

nice uncore mate ;)

hey when are you going to post a FULL screenshots hey :D

[3oh6]

gomeler;3843660']Man, that is the 920 from hell, striking fear in the hearts of 975 owners everywhere.

your leet photoshop skills rock :D
it sure kicks the snot out of my 975...short multiplier aside. and that wasn't photoshop, i swear it is legit...must be some kind of CPU-Z bug.


hey when are you going to post a FULL screenshots hey :D
not sure what you mean, my screen resolution is 786x995, that's all there is to it :D

[dinos22]

no memset/cpu tweaker :p:

[Slovnaft]

jody, when are you going to start believing in big uncore? :rolleyes:

[3oh6]

no memset/cpu tweaker :p:
there is no room for all of that with my new 786x995 monitor...so i guess i can't share that info :D


jody, when are you going to start believing in big uncore? :rolleyes:
when i can get better times with it...until then, i'll just continue running low uncore and spanking every one else's 920 at high uncore ;)

[Slovnaft]

when someone can discount the testing i have done that shows it doesn't help if you know what you are doing.

ow that smarts.
now who was it that was finding the BIOS supporting full RTL control just a tad buggy and erratic... if only i could sound cheeky online...

[dinos22]

hehehehe jody lovin' the new monitor :ROTF:

about your theory > i've actually done some testing last night on GBT and i'm not convinced yet :p::D

[edit] can you please run a 4GHz run
i want to know how much spanking i'm getting again hehhe
i've got an 8m41s admittely on a crap OS with bad wazza but regardless that's my best so far

http://img222.imageshack.us/img222/7231/4900mhznb888mhz665161t4.png

[3oh6]

[edit] can you please run a 4GHz run
i want to know how much spanking i'm getting again hehhe
i've got an 8m41s admittely on a crap OS with bad wazza but regardless that's my best so far
that is like asking me to drive a V-Tec engine and keeping it under 6K RPM. creating a false limit to prove a theory wrong doesn't work.

you are on a GB board, lord knows i don't run one of those. i am on a Classified at 250BCLK. i am not discounting high uncore, i am discounting high uncore at 250BCLK. i don't give a rats ass what you are putting up for times at 4GHz, run a 920 at 5.2GHz ~ 5.3GHz with high uncore and we'll talk ;)

...oh that's right, you can't run high uncore at 245BCLK+. oh wait, you can't run 245BCLK at all on that board :shakes:

:D :D

[dinos22]

:rofl::rofl: bltchy :D
i like it :D

[roller11]

I can go down only to 16x uncore on my Classified E760, is this the lower limit on all Classified boards? What is "max mem", I don't see it i BIOS?

[JacobF]

I can go down only to 16x uncore on my Classified E760, is this the lower limit on all Classified boards? What is "max mem", I don't see it i BIOS?

The lowest uncore is double your mem multiplier. (in your case, 2:8)