ASRock Penryn1600SLI-110dB & Q6600 G0 Overclock Help!

[Neilsouth]

Had this board for over a year now but i've never been able to get it above 3ghz! , Here are my settings currently

ASRock Penryn1600SLI-110dB
Q6600 Core 2 Quad Kentsfield B Stepping , Rev G0
8GB 800DDR2

http://i262.photobucket.com/albums/ii120/NeilsouthPhotos/1-3.jpg

http://i262.photobucket.com/albums/ii120/NeilsouthPhotos/2-1.jpg

[Neilsouth]

Forgot the bios info!

CPU FREQ - 333
PCIE FREQ - 101
DRAM - AUTO
MEM TIMINGS - AUTO
HYPER TRANSPORT MHZ [ 1000MHZ ]

CPU VOLTAGE - 1.41875V
DRAM VOLTAGE - 2.08 V
CHIPSET VOLTAGE - 1.382V
VTT - 1.42V
GTLREF VOLT - [ HIGH ]

HALT STATE - DISABLED
MAX CPUID VALUE LIMIT - DISABLED
CPU THERMAL THROTTLE - DISABLED
SPEED STEP - DISABLED

[Neilsouth]

Noone?

[Neilsouth]

Nobody has an asrock penryn then , bad for me lol

[fatguy1992]

I don't have that board, chances are its your mobo holding you back. That mobo is pretty low end, getting a Q6600 above 3GHz with 8GB of ram will need something better.

BTW if possible lower that VTT (when at 3GHz) about 1.3VTT should be plenty.