framesX2X
04-23-2009, 02:10 AM
hi, all
here is my new Rig..
i did some overclocking, and got it stable at 4 ghz, but the memory that i'm using are G-Skill-
F3-16000CL9T-6GBPS 1.65v Perfect Storm, rated at 2000mhz 9,9,9,24.
i read somewhere, that one guy got the same memory i hive and tested with
rampage II extreme board., " his notes" below Oo i readed on newegg.com
Also i can do "Memory Level up" without overclocking CPU / 2000Mhz no problem come back 2.7Ghz at 2000Mhz, so i no that can clock the memory to 2000Mhz, all i need is the right timming...
----------------------------------------------------------------------------------------------
From: NewEgg.com Web-Site.
Pros: I don't usually write reviews of products that I buy here, but since there are not many reviews of this product, and I'm impressed with the performance of this memory I am this time.
So far in testing this memory I've used the following settings:
6-6-6-18 cr1 @ 1600 1.62 volts
7-7-7-20 cr1 @ 1866 1.62 volts
8-8-8-22 cr1 @ 2000 1.62 volts
These settings have been stable with the following tests:
Intel Burn Test 20 loops
Memtest 2.11 6 hours
Prime 95 6 hours
Several games for hours
I'm using a Asus Rampage II Extreme Motherboard, so it seems to be compatible even if its not on the tested motherboard list.
I'm still early in testing, so I might be able to get better timings by some more tweaking of the settings and voltage.
Cons: None so far. I knew the price when I bought them, so not a con.
Other Thoughts: According to G. Skills website, this is not the set that is rated at 7-8-7-20 cr1.
That memory is F3-1600CL7T-6GBS.
So can someone give me any idea how to configure the memory to 2000mhz to 1866mhz with my
setting below.
Temps: >stress test on all temp readout on 4 hours running<
CPU= 39c tested 4hr 44c to 46c
NB=37c tested 4hr 40c
SB=38c tested 4hr 41c
MB=35c tested 4hr 37c
water=temp at all times between 30c to 32c
thanks.
""also two important questions"" about the CPU Voltage and the QPI-Dram Voltage, what is the safe setting, take a look my Bios setting below.
Mmmm, after reading more thread, i got it to 4.2GB at 2025Mhz
and stable so i think so...
if any one can lookover my Bios Setting to see if everything o.k. and safe..
My Bios Setting. thanks
MB - Asus Rampage 2 Extreme - Bios update to 1306
CPU - i7-920 C0/C1 overclocked to 4.2 Ghz
RAM -G-Skill ,F3-16000CL9-6GBPS Perfect Storm- 6GB
CPU Cooler - Switech / MCM5000 series water block
Koolance waterblock plus DRAM watrblock
Switech X2 Radiators MCR220-QP / MCR320-QP
Thermaltake WaterPump 500
PrimoChill Pure Performance Cooler
Fan -3X 240mm / 1X 140mm
VGA - EGVA-9800GX2 superclocked KO SSC EK-waterblock
PSU -ABS-Tagan BZ series 1100W 80-plus
HDD -WD ValociRaptor 150GB 10K
HDD-WD SATA300 16/ 250GB X2 Raid
Case: HAF-932
----------------------------------------------
AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - 2000mhz <------------------- the system is not stable and less i set this, what?
CPU Ratio setting - 21
CPU Turbo-Power Limit - Enable
CPU configuration
CPU Ratio Setting - 21
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - enable
Execute Disabled bit - enable
Intel HT Technology - enable
Active Processor Cores - all
A20M - disabled
Intel Speedstep tech - disable
Intel Turbo Mode tech - enable
Intel C-STATE tech - disabled
BCLK frequency - 202.5
PCIE frequency - 100
DRAM frequency - DDR3 2025MHz
UCLK frequency - 4009MHz
QPI frequency --- Auto <<------------ what such this be set to?
Dram timing control
1st iformation - T1 -8-8-8-22-5-88-14-8-24-0
2nd information - 1N-59-62-63
3rd information - 6-6-18-10-10-10-7-6-4-7-7-4
EPU II phase control - full phase
Load-line calibration - enable or disable
CPU differential amplitude - auto
Extreme OV - disabled
Current voltage 1.396v - 1.819v - 1.356v
Cpu voltage - 1.44375v <<---------- at this voltage my temp 44c no load, but with a full load 48c
CPU PLL voltage - 1.81592v or auto reading from turbo model
QPI-Dram voltage - 1.34375v <<--------- what's the safe voltage setting?
Current voltage - auto
IOH voltage - 1.11341
IOH PCIE voltage - 1.51106v
ICH voltage- 1.11341v
ICH PCIE voltage - 1.51106v
Current voltage 1.64356v
DRAM Bus voltage - 1.64356v
DRAM REF voltage - auto
Debug mode - string
Keyboard TeakIt comtrol - disabled
CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto
http://valid.canardpc.com/cache/banner/548755.png (http://valid.canardpc.com/show_oc.php?id=548755)
CPU-Z Validator 3.0 (http://valid.canardpc.com/show_oc.php?id=548746)
CPU-Z Validator 3.0
P.S. also look what i did to the back plate of motherboard to help cool down i7 920 cpu, with a small fan wheel. checkout pics;)
http://resources.vr-zone.com/image_deposit/up2/12404780481a6bc53320.jpg
o.k. the pics of my new rig
http://resources.vr-zone.com/image_deposit/up2/1240116869ca5748931b.jpg
http://resources.vr-zone.com/image_deposit/up2/12401169339c1d5b89bc.jpg
http://resources.vr-zone.com/image_deposit/up2/124011743882e5eef9e2.jpg
http://resources.vr-zone.com/image_deposit/up2/1240117572825b7b313e.jpg
http://resources.vr-zone.com/image_deposit/up2/12401177925f463c67f2.jpg
here is my new Rig..
i did some overclocking, and got it stable at 4 ghz, but the memory that i'm using are G-Skill-
F3-16000CL9T-6GBPS 1.65v Perfect Storm, rated at 2000mhz 9,9,9,24.
i read somewhere, that one guy got the same memory i hive and tested with
rampage II extreme board., " his notes" below Oo i readed on newegg.com
Also i can do "Memory Level up" without overclocking CPU / 2000Mhz no problem come back 2.7Ghz at 2000Mhz, so i no that can clock the memory to 2000Mhz, all i need is the right timming...
----------------------------------------------------------------------------------------------
From: NewEgg.com Web-Site.
Pros: I don't usually write reviews of products that I buy here, but since there are not many reviews of this product, and I'm impressed with the performance of this memory I am this time.
So far in testing this memory I've used the following settings:
6-6-6-18 cr1 @ 1600 1.62 volts
7-7-7-20 cr1 @ 1866 1.62 volts
8-8-8-22 cr1 @ 2000 1.62 volts
These settings have been stable with the following tests:
Intel Burn Test 20 loops
Memtest 2.11 6 hours
Prime 95 6 hours
Several games for hours
I'm using a Asus Rampage II Extreme Motherboard, so it seems to be compatible even if its not on the tested motherboard list.
I'm still early in testing, so I might be able to get better timings by some more tweaking of the settings and voltage.
Cons: None so far. I knew the price when I bought them, so not a con.
Other Thoughts: According to G. Skills website, this is not the set that is rated at 7-8-7-20 cr1.
That memory is F3-1600CL7T-6GBS.
So can someone give me any idea how to configure the memory to 2000mhz to 1866mhz with my
setting below.
Temps: >stress test on all temp readout on 4 hours running<
CPU= 39c tested 4hr 44c to 46c
NB=37c tested 4hr 40c
SB=38c tested 4hr 41c
MB=35c tested 4hr 37c
water=temp at all times between 30c to 32c
thanks.
""also two important questions"" about the CPU Voltage and the QPI-Dram Voltage, what is the safe setting, take a look my Bios setting below.
Mmmm, after reading more thread, i got it to 4.2GB at 2025Mhz
and stable so i think so...
if any one can lookover my Bios Setting to see if everything o.k. and safe..
My Bios Setting. thanks
MB - Asus Rampage 2 Extreme - Bios update to 1306
CPU - i7-920 C0/C1 overclocked to 4.2 Ghz
RAM -G-Skill ,F3-16000CL9-6GBPS Perfect Storm- 6GB
CPU Cooler - Switech / MCM5000 series water block
Koolance waterblock plus DRAM watrblock
Switech X2 Radiators MCR220-QP / MCR320-QP
Thermaltake WaterPump 500
PrimoChill Pure Performance Cooler
Fan -3X 240mm / 1X 140mm
VGA - EGVA-9800GX2 superclocked KO SSC EK-waterblock
PSU -ABS-Tagan BZ series 1100W 80-plus
HDD -WD ValociRaptor 150GB 10K
HDD-WD SATA300 16/ 250GB X2 Raid
Case: HAF-932
----------------------------------------------
AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - 2000mhz <------------------- the system is not stable and less i set this, what?
CPU Ratio setting - 21
CPU Turbo-Power Limit - Enable
CPU configuration
CPU Ratio Setting - 21
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - enable
Execute Disabled bit - enable
Intel HT Technology - enable
Active Processor Cores - all
A20M - disabled
Intel Speedstep tech - disable
Intel Turbo Mode tech - enable
Intel C-STATE tech - disabled
BCLK frequency - 202.5
PCIE frequency - 100
DRAM frequency - DDR3 2025MHz
UCLK frequency - 4009MHz
QPI frequency --- Auto <<------------ what such this be set to?
Dram timing control
1st iformation - T1 -8-8-8-22-5-88-14-8-24-0
2nd information - 1N-59-62-63
3rd information - 6-6-18-10-10-10-7-6-4-7-7-4
EPU II phase control - full phase
Load-line calibration - enable or disable
CPU differential amplitude - auto
Extreme OV - disabled
Current voltage 1.396v - 1.819v - 1.356v
Cpu voltage - 1.44375v <<---------- at this voltage my temp 44c no load, but with a full load 48c
CPU PLL voltage - 1.81592v or auto reading from turbo model
QPI-Dram voltage - 1.34375v <<--------- what's the safe voltage setting?
Current voltage - auto
IOH voltage - 1.11341
IOH PCIE voltage - 1.51106v
ICH voltage- 1.11341v
ICH PCIE voltage - 1.51106v
Current voltage 1.64356v
DRAM Bus voltage - 1.64356v
DRAM REF voltage - auto
Debug mode - string
Keyboard TeakIt comtrol - disabled
CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto
http://valid.canardpc.com/cache/banner/548755.png (http://valid.canardpc.com/show_oc.php?id=548755)
CPU-Z Validator 3.0 (http://valid.canardpc.com/show_oc.php?id=548746)
CPU-Z Validator 3.0
P.S. also look what i did to the back plate of motherboard to help cool down i7 920 cpu, with a small fan wheel. checkout pics;)
http://resources.vr-zone.com/image_deposit/up2/12404780481a6bc53320.jpg
o.k. the pics of my new rig
http://resources.vr-zone.com/image_deposit/up2/1240116869ca5748931b.jpg
http://resources.vr-zone.com/image_deposit/up2/12401169339c1d5b89bc.jpg
http://resources.vr-zone.com/image_deposit/up2/124011743882e5eef9e2.jpg
http://resources.vr-zone.com/image_deposit/up2/1240117572825b7b313e.jpg
http://resources.vr-zone.com/image_deposit/up2/12401177925f463c67f2.jpg