View Full Version : Finally got my 226W swifty on the 9800 Pro!
Marquzz
11-06-2003, 01:22 PM
Here you go fellow overclockers! Core doing well still stock voltage, voltmod coming tomorrow. Little dissapointed in the mem though, only 392 MHz :(
http://www.techsweden.org/bilder/front.jpg
http://www.techsweden.org/bilder/back.jpg
http://www.techsweden.org/bilder/swifty226.jpg
Here you have a '03 bench, rest of the system sucks so no '01 action for you yet ;)
http://service.futuremark.com/compare?2k3=1529518
Will follow up after voltmod tomorrow :)
sandman
11-06-2003, 07:45 PM
nice core clocks for a non-vmodded card.
Looks like some nice cooling :)
Bra!nFreeZe^
11-10-2003, 02:20 PM
My 9500@9700 runs 450mhz core on air :) (vmod of course!) but with that kind of cooling i think that u will be more than able to get some very high clocks when/if u vmod that card!
\/icious
11-11-2003, 08:33 AM
do you know what kind of temps you are getting
I'd expect his temps (idle to hover around -15C (with more insulation on the back it'll drop to much lower ones and your mem via PCB will be cooled too :) )
Marquzz, SPLENDID job mate!
Can't wait for results!
How did you fix it to your card?
Stang_Man
11-11-2003, 01:49 PM
hey, very nice!
your project is invalid, and i'm wondering what you're getting for core clocks.
with a swiftech mcw50-t, 80watt pelt, i can get 519mhz from the core, at 1.88v and the back of the card hits 10C in nature, and idles at 2C.
Marquzz
11-11-2003, 01:51 PM
Jabo -> I screwed bolts in the coldplate and I have neopren+plexi on the backside and then wingnuts on the bolts and a lot of sealtring on bolts/wingnuts. I have a sensor on the back of the core but the instrument doesn't show negative celsius so I don't really know the temp. Got +2°C under load with 560 Mhz and 2.2V (I know, crazy vgpu, but I just wanted to know how far I could push her ;)).
My results with chilled water (+5-+10°C) I can run through '01 with 560/402 with 2.0Vgpu and 3.2Vmem (could take the memory up to 417 if I liked to, but if I do my scores decrease). It would be fun to test this card with a better cooling, and I probobly will go för DI and eventually LN2. Getting an XT in a while aswell.
Marquzz
11-11-2003, 01:54 PM
Originally posted by Stang_Man
hey, very nice!
your project is invalid, and i'm wondering what you're getting for core clocks.
with a swiftech mcw50-t, 80watt pelt, i can get 519mhz from the core, at 1.88v and the back of the card hits 10C in nature, and idles at 2C.
Oh, sorry, got a better result so I removed the older one, her you go:
http://service.futuremark.com/compare?2k3=1544160
=[PULSAR]=
10-06-2004, 08:30 PM
Marquzz sorry to post on this old thread but I was searching and found this thread. How do you mount the WB on the card. I wanna put a 226W TEC on my x800.
saaya
10-07-2004, 09:33 AM
+2C gpu temp with a 227W tec at 15v cooled by chilled water? :stick:
that means the 9800 is putting out 140W of heat with 2.2v vgpu :eek:
freecableguy
10-11-2004, 09:33 AM
Why are the barbs not screwed in all the way???