View Full Version : E8500@4.9ghz+OCZReaper1300mhz
bigcesar
02-22-2009, 05:29 PM
this is my last result:
Intel Core 2 Duo E8500 :rocker:
Asus P5Q Deluxe
Ocz Reaper PC9600 :rocker:
Topower M9 650w
NOCTUA NH-U12P ( Powered By Hardmodding ) :rocker:
Seagate Barracuda 7200.10 250GB x 2
Ventiladores varios.
ATI X300
8500@4.9ghz+1300mhz cas5 SPI1M
http://img23.imageshack.us/img23/6479/1m4904.png
8500@4.9ghz+1300mhz cas5 SPI2M
http://img16.imageshack.us/img16/350/2m48972o.png
E8500@5GHZ
http://img18.imageshack.us/img18/2742/5ghz.png
It has very much potentially to this processor :)
and coming soon more very nice bench :up:
ShawnTRD
02-22-2009, 05:41 PM
wow.. What you cooling that thing with?
bigcesar
02-22-2009, 05:44 PM
wow.. What you cooling that thing with?
NOCTUA NH-U12P
What kind of temps with that much voltage?
patrickgerry
02-22-2009, 06:40 PM
Golden chip. What batch?
bigcesar
02-22-2009, 08:14 PM
What kind of temps with that much voltage?
hot but stable at 50 idle and 70 full
Golden chip. What batch?
Q828A306
bigcesar
02-22-2009, 08:45 PM
http://img6.imageshack.us/img6/9122/dsc02014.jpg
bigcesar
02-22-2009, 08:47 PM
http://img25.imageshack.us/img25/4074/dsc01996.jpg
bigcesar
02-22-2009, 08:49 PM
http://img98.imageshack.us/img98/1484/dsc01984.jpg
bigcesar
02-22-2009, 08:50 PM
http://img6.imageshack.us/img6/7599/dsc01988.jpg
bigcesar
02-23-2009, 08:21 PM
soon dry ice :)
vrdublu
02-27-2009, 01:31 AM
soon dry ice :)
Would you mind posting your bios settings for the 4.9 Ghz.:clap:
bigcesar
03-01-2009, 07:33 AM
Would you mind posting your bios settings for the 4.9 Ghz.:clap:
i remember this:
CPU Voltage: 1.55
CPU GTL Voltage Reference (0/2): 0.680
CPU GTL Voltage Reference (1/3): 0.680
CPU PLL Voltage: 1.72
FSB Termination Voltage: 1.38
DRAM Voltage: 2.4
NB Voltage: 1.38
cpu clock skew 400
nb clock skew 200
Leeghoofd
03-01-2009, 11:10 AM
I see nothing special here from you Cesar (don't get why people are amased by these scores), you can do way better than this for sure with that hardware... Good tip : get off that 1:1 Divider if you want better scores and play with the PL's... you got the rams for it !!
GET TO WORK MATE, YOU CAN DO IT !!
bigcesar
03-01-2009, 01:36 PM
I see nothing special here from you Cesar (don't get why people are amased by these scores), you can do way better than this for sure with that hardware... Good tip : get off that 1:1 Divider if you want better scores and play with the PL's... you got the rams for it !!
GET TO WORK MATE, YOU CAN DO IT !!
thanks
but i feel my mobo already is not like before :(
i try this in BIOS 1805:
AI Overclock tuner:manual
CPU Ratio Setting: 9.5
FSB Strap to North Bridge: auto
FSB Frequency: 500
PCI-E Frequency: 101
DRAM Frequency: AUTO
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: manual
CAS# Latency:4
RAS# to CAS# Delay:4
RAS# Precharge:4
RAS# Activate to Precharge:15
DRAM Static Read Control: Disabled
DRAM Read Training: disable
MEM. OC Charger: AUTO
AI Clock Twister: lighther
AI Transaction Booster: manual
PL: l13
CPU Voltage: 1.5
CPU GTL Voltage Reference (0/2): 0.680
CPU GTL Voltage Reference (1/3): 0.680
CPU PLL Voltage: 1.74
FSB Termination Voltage: 1.4
DRAM Voltage: 2.4
NB Voltage: 1.4
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO
Load Line Calibration: enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
clock skew cpu: 400
clock skew nb: 200
and play with setfsb in win
in my country is 30° of temp ambient and the procesor is burn (70°-80° in BIOS!!!) :(
Leeghoofd
03-01-2009, 11:19 PM
some wicked FSB and PLL voltages there man, try to go easy on that ! and time to go PL 10 and lower !
bigcesar
03-02-2009, 08:40 PM
some wicked FSB and PLL voltages there man, try to go easy on that ! and time to go PL 10 and lower !
what is the dangerous voltage of PLL?
1.74 it is not high for air?