View Full Version : SLK-947u w/92mm Delta
Nookie420
11-02-2003, 03:12 PM
What temps should be expected from a slk-947u with a 92mm tornado fan on full blast with a 2500+ barton at stock/overclocked to 2.2Ghz?
Post your temps if u have a slk900 or 947 with a 80-92mm tornado so i know where this system im building for a friend is gonna stand temp wise.
i got a 947u coming in on tuesday, ill post then.
Nookie420
11-02-2003, 05:07 PM
k, thnx.
sjohnson
11-02-2003, 05:12 PM
SLK900-A, 80mm Thermaltake smartfan.
100% load via two instances of f@h, 1700+ @ 2.4 GHz on a kd7-e/200 FSB and 1.75 Vcore. Type 44 HSF compound. My gaming rig.
39c Sys (really the NB temp, the probe sits next to the NB)
49c Internal CPU diode
26c ambient.
CPU is running 3c cooler than with SLK800 and same setup otherwise.
Nookie420
11-04-2003, 04:10 PM
nice OC u got there, thats a pretty low voltage, my 1700+ does 2.2Ghz 1.8.
sandman
11-04-2003, 04:21 PM
my 1700+ does 2400mhz at 1.9.....
sjohnson
11-04-2003, 05:07 PM
Heat is the problem with my 1700+. Anything over a measured 55c internal core temp and it goes TU. I've had it to 2.5 @ 1.8v but the temps soared. Not stable at all...
this heatsink is very nice, with a delta 80mm 68cfm i was getting 44c under prime with my duron at 12x200 1.75v..
it also works pretty good with quiet fans as well.
sjohnson
11-04-2003, 10:40 PM
Nice 'clock taco! Got a link to where you got that Duron? :)
newegg.com :)
just hope your lucky enough to get a B stepping and not an A, like equito. check my posts in amd section, under the duron thread. :toast:
theres still more to come..
sjohnson
11-04-2003, 11:05 PM
TY!