Vapochill LS Stop working :( need help.

[chispy]

Good Day guys , i was doing some test with diferent cpus on my Vapochill LS , I was conecting the cables to the chill control when suddenly the board start it up on its own , i hurried and pluged in the mobo PS cable to turn on the Unit , then the Unit turn off by itself and it wont turn on anymore , the display its off even wheen i plug in the power cable and theres no sign of life from the vapo. My guess it was a short of some kind , the chill control works and evrything but the unit cannot be turn on. What to do to turn on the unit , any help will be greatly appreciated.

[EvoCarlos]

hey
so i just wanted to check
i have a vapo and the cc is a bit of a pain in the ass
screen frezzes - screen contrast goes to 0

but did you check if the fuse in the rear of the unit is blown ? (rear righthand side looking from front)
another thing i found with mine was sometimes the screen goes blank but still has the backlight on, i found a breif press of the power button reset the screen back to normal
but from the info you have give i'd say check the fuse 1st :) if it is it could have been if the unit has been started right after it has been turn off without giveing time for the hi and low side to equlize pressures and the compressor just humms then blows the fuse as ive found (10a slowblow glass fuse)

hope this is some help to you carl..

[chispy]

Thank you for the information and help , i opened the unit (as asetek customer suport does not exist anymore :() and checked the fuze ,but it does not look black or blown ??? , i checked all the cables and the circuitry and everything looks good. The unit is brand new only 57 days old :( since i bought it from frozencpu.com. I will replace the fuze tomorrow and i will let you know if it works. thanks for your response , greatly appreciated.


chispy.