seanbarman
12-18-2008, 10:35 AM
My Pc has been extremely stable but decided increase the memory so I bought some balistixx 4gb 2x2gb 6400 4,4,4,12. I can't seem to get this stable even at stock speeds. I was previously running 2x1gb adata extreme. I removed this and added the balistix. Crucial lists my mainboard as compatible!
I could only get the pc to boot by increasing mch from 125 to 133
the cpu is overclocked Q6600 2.4 to 3.2 8x400.
cpu voltage is 1.345
the pc is stable with adata but reboots on prime 95 with the crucial. It will pass memtest if i set mch to 133
I had 6gb in at 5,5,5,18 and it passes memtest but again reboots during prime 95. I recently installed nortons 2009, could this be the problem.
I have a silverstone zeus 750w psu.
thanks for any help
I could only get the pc to boot by increasing mch from 125 to 133
the cpu is overclocked Q6600 2.4 to 3.2 8x400.
cpu voltage is 1.345
the pc is stable with adata but reboots on prime 95 with the crucial. It will pass memtest if i set mch to 133
I had 6gb in at 5,5,5,18 and it passes memtest but again reboots during prime 95. I recently installed nortons 2009, could this be the problem.
I have a silverstone zeus 750w psu.
thanks for any help