xtreme chillin :D

[afireinside]

http://mywebpage.netscape.com/afIr3wIthIn/PA160116.JPG
Theres the video card again with tubes on it
http://mywebpage.netscape.com/afIr3wIthIn/PA160117.JPG
NB and CPU blocks on and fully insulated (I hope ;) )
http://mywebpage.netscape.com/afIr3wIthIn/PA160118.JPG
NB closeup
http://mywebpage.netscape.com/afIr3wIthIn/PA160119.JPG
Theres the window AC unit I'll be using as a temporary chiller till I get my real one planed and setup (by december) Propane powa
http://mywebpage.netscape.com/afIr3wIthIn/PA160120.JPG
Theres the whole thing but I still need a clamp for the video card to NB and I need a metal fitting for the top of the pump. Also, the stupid video card bends and would crack if the insulation didn't get stuck on a cap and bend it when I put the tube from the card to the NB on so I have a major issue there :mad: Help appreciated there :p:
http://mywebpage.netscape.com/afIr3wIthIn/PA160121.JPG
And thats a closeup of the board. Makes me all hyper happy when I look at it :D

[luihed]

Looking good.... are you going to insulate the pump as well? Right now mine is in the reseviour and its heating up my water bigtime...... Im gonna take it out this weekend but Im not sure if needs insulating or not......

Good work there bro, how cold are you getting your water to?

[afireinside]

God only knows if I have to insulate it.... I haven't even gotten my liquid yet (getting tommorow) or gotten the evap into the res.

[luihed]

Im thinking that we might have to insulate it..... but the good thing is that ya aint gonna blow anything up if you get condensation in your pump:D Good luck tommorrow, Im sure your just itchin to get that thing going.....

[afireinside]

I'm itchin to see if it all still works :p:

If it all does tommorow should be fun. I can use a jigsaw with metal cutting blades to chop up my TT sinks to put on my mosfets right?

Also, nanotherm or AS5? I just used the last of my AS3.

[Nebulous]

Dam AFI, lookin good! :toast: All I'm waiting on is my barton and imma hook up the chillzilla up. i have evrything ready to start the insulation on both NB and cpu blocks and lines. About a week ago I got my new Via Aqua 2600. 740 of gph bliss :D

Just a few more days. Crap i hate waiting! :upset:

Good Luck tomorrow. i wanna see that baby fired up and runnin!;)

[afireinside]

Whered you get the VIA aqua pump? I want one 327 GPH isint enough for me :D Jason said with a powerful enough pump and -40C water you can get prommie temps :eek:
Tommorow is gona own. And HOPEFULLY my board wont be the issue and I have just had 4 suckey CPUs/I needed better NB and mosfet cooling.

EDIT:Guys, I still need help keepin the video card straight up. I wish I had a removable mobo tray or something now.

[Nebulous]

I got the pump from ebay. 43 bux shipped new in the box.

they got one here from the same place I got mine:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2353688648&category=519

only 12 hours left @ 33 bux and 10 bux shipping fedex ground.

As for the vid card; can't you make some sort of bracket?

[afireinside]

Looks good :D Not gona get one now though.
How would I make a bracket?

[STEvil]

zip tie from motherboard mounting hole to a hole in the vidcard somewehre if there are any free ones... or around the top of the PCI bracket if there are none.

Those mosfets look awefully bare..

[Nebulous]

Speaking of mosfets, i gotta hack up some sinks for mine since my board's already vmodded :D I wanna have all the bases covered before I bring the main back to life ;)

Hey AFI, better hook up that SB too.

[afireinside]

Thats a good idea to :p:

[Nebulous]

Originally posted by afireinside
Thats a good idea to :p:

:thumbsup:

Here's my other NF7
http://members.speedguide.net/lt73/p1040002.jpg

[afireinside]

Looks good :banana:
I can't bring my self to VDIMM mine now because if I kill it I don't want to reinsulate :mad:

[Nebulous]

Tanx :) Actually this is #5 for me but it's a non-s. I swapped it for an 8RDA+ 1.0 I had in my back up rig. I actually got it like that as you see it ;) A friend of mine SIN from another forum bought it and wasn't having fun with it and decided to let it go. Knowing how he is about Epox I pmed him and offered to swap. He agreed and here it sits ready for action :D

I'm sure we both are gonna have lots-o-fun, hee hee! :banana:

[afireinside]

Actually this is #5 for me but it's a non-s :eek:
And what kind of idiot trades a rev 2 board for a rev 1 board?

And this sin woulden't happen to run Sin Systems would he?

EDIT:I found out the mounting hardware on the GPU doesen't hold it on all the way under pressure so I have to get a C clamp to hold it today :stick:
I hope the cap its laying on hasent bent TO far if at all yet....