A64 Mb how high can you go

[Stinger]

Can you post it like this

MB=Asus K8V
mem= Adata pc3200
fsb=245mhz
HT=800
Memspeed= 1:1
Timings=2-2-5-2
vmods=vcore,vmem

Cant go over 250mhz no matter if I lower HT or what Memdevider I use, Dont know why yet, if any 1 have any tips please let me know.

[Major]

stinger the K8V has agp/pci dividers that change with the fsb setting. The best thing to do is to change the fsb in 2mhz steps, test it and even if it doest load windows go ahead and increase the fsb another 2mhz again. did that even make sense ? lol

I ran into a simular wall at 250, but it works perfect at 260mhz.

[Boogotop]

MB=ASUS K8V DX
MEM=old HyperX 3500 (BH-5)
FSB=260 (bios limited)
HT=800
MEMSPEED=5/3
TIMINGS=2/2/5/2
VMODS=no one

now i stay at 233 1/1 cause that was my second defective Mach2 in a week!!:(

[macci]

MB=ASUS K8V DX
MEM=ValueRAM DDR400 (bh5)
FSB=303 (with some HDD problems, should try running in PIO mode)
HT=600 (just in case didn't try 800)
MEMSPEED=5/3
TIMINGS=2/2/5/2
VMODS=Vmem 3.2V, Vldt 2.9V, Vcore 2V
+TurboPLL

Screenshot:
303FSB (http://www.solidhardware.com/macci/k8v/k8v_303fsb.gif) (notice the corrupted pic thanks to HDD problems)

SuperPi 1M at 300FSB (http://www.solidhardware.com/macci/k8v/k8v_300fsb_spi.gif)

[Major]

I see you got the TurboPll working ! :toast:

Macci why are you OCing with 8x divider ? just trying for fsb ?

[macci]

yea just testin fsb