athlon64 overclock record. all owners please post

[=[PULSAR]=]

turez what kind of air and how stable is that?

[robocopy]

=']turez what kind of air and how stable is that?

Printstable only.
It's about 20-25c in my room.
I will try "outside-air" soon ;D
3GHz is not far away.

[drcrawn]

This one is sorta boring as far as memory bandwith goes, but a new record for me:-)
Fairly stable, so far... Windows, SuperPi 1million, 32sec a few times. I wanta go for 31s. Going to start increasing FSB a little. I think I might be ale to get 218x12.5, we'll see.
Winter-time rules!

http://img117.exs.cx/img117/3197/652700best.jpg

[craig588]

You memory is acctually running at 208MHz.

[drcrawn]

You memory is acctually running at 208MHz.

Please explain.

[bachus_anonym]

Please explain.
A64 has this "bug" that rounds up every .5 multiplier. in other words:

your REAL mem speed is (216x12.5) / 13 = 2700 / 13 ~ 208Mhz

[funkflix]

Now with some TCCDs, but not 28sec. :mad:

http://people.freenet.de/funkflix/292dual.jpg

[drcrawn]

A64 has this "bug" that rounds up every .5 multiplier. in other words:

your REAL mem speed is (216x12.5) / 13 = 2700 / 13 ~ 208Mhz

I'm still not following. I ran 216x 12.5 for 2700. That math seems right to me.

Ok.. are you telling me that when I use .5 multis, the memory actually runs slower, even though all programs show it as 216mhz?

Seems like you are saying that 12.5 doesnt exist. Instead it is really 208x13, even though I chose a 12.5 multi. In other words, no such thing as a 1/2 mulit at all. Is this correct?

[bachus_anonym]

oh, i just didn't notice that you're running FX... that rule may not stick well to FX... but i'll double check that for you if REAL mem speed is showing up in CPU-Z mem tab...

[freestylercs]

@grave i thought the OCZ don't run very well??
Or did you have found the solution for it?

free

[funkflix]

@grave i thought the OCZ don't run very well??
Or did you have found the solution for it?

free

Dunno the solution for it, today i tooked them in again and it worked! :confused:

[kakaroto]

Only 1.74v in bios and cooled with Mach 1 R507 :D
Totally stable in hours games playing, superPI32M, 3dmark but craps out in prime within 0.5sec. lol

http://www.xs4all.nl/~famchow/A64_3400/3400+%200.6/superPI8M_3.1GHz.JPG

[bachus_anonym]

here's my GO at A64 S939 - 270x10=2700MHz @ 1.63v REAL, DDR540 6-2-2 cas2, OCZ DDR Booster 3.7v

MSI K8N Neo2 Platinum - Q47353.1 0440A2 S Taiwan
A64 3200+ 90nm "Winchester" - CBBFD 0441UPCW
Thermalright XP-90 w/ YTech 120mm

CLICK for Full Size Screenshot - 2048x1536 384KB

http://www.xtremesystems.org/forums/attachment.php?attachmentid=20513 (http://www.clockmehigh.com/xtreme/Neo2/270x10_SuperPi_ALL.jpg)

This is max SuperPi 32M and 3dMark2001 stable.... 265x10 is my 24/7 usage so far :)

[drcrawn]

Hey bachus, after playing with multis and FSB all day yesterday, I think you are correct. Using a 1/2 multi really sucked. Even keeping the FSB around 217, a half multi just didnt perform well. My best performance comes with 12x and 220-222, if it doesnt crash in bechies. 2610 is about all I can get 24/7 stable with my cooling. Thanks for the info.

[RocKer]

I dunno if it is a record but this (http://users.pandora.be/RocKer/A64%200430%20RPMW/Sandra%20Bench/Memorybench-2475mhz.JPG) is my record fsb sandra membench,any tips to do better:).

And a Pifast (http://users.pandora.be/RocKer/A64%200430%20RPMW/Pifast/Pifast-2475mhz.JPG) ,and new SuperPI (http://users.pandora.be/RocKer/A64%200430%20RPMW/SuperPI/Pifast-2540mhz.JPG) ,but superpi is at 1.75vcore,3.4vdimm 10x254

It's all at 1.85vcore and 3.5vdimm,aircooled,big blower on mem,it's pretty cool,cpu at +-40°c,if bios info is correct.

[LikwidKool]

A64 3200+@2922MHz on air.
CBBFD 0433SPMW

damn. I have the same exact 3200+ and it will only do 2.65ghz at 1.7v

My 3500+ on the other hand is doing 2.7ghz at 1.65v Stupid me can't find where I wrote down the cpu info though.

[boblemagnifique]

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cpumark330.png

3200+ CBBFD 0435 TPAW :(
Gigabyte K8ns ultra s939
2720mhz - 1.65v bios
Aircooling box
Max Benchs
2*256 A-data BH5 (2/2/2/2/7/11) 3.75v

[Zanr Zij]

my result...on Watercooling...

[Zanr Zij]

n.. .

[=[PULSAR]=]

Me very jealous ;) Whats your max stable clock say 32M for SPI?

[zyx]

cpuz stable :D :p: :)

[MarilynMX]

you guys are impressive! I'm using an early made winchester and OCZ 3200 Plat. These rams doesn't allow me to try higher HTT with 1:1. My best try is 218MHz 2-3-5-2 1T :( Hope 3200 Plat rev.2 could do better

[SPQQKY]

A little better. Still air cooled

ADA3400AEP4AX
CBAZC 0435XPMW
1094922140518

1.7 volts

Corsair was set to 333 and timings were loosened to 2.5-3-3-7...killed my SuperPI.

[klootzakje]

i see a lot of 2.9ghz with winchester 3200+ ... i got 2934mhz with 3000+ ;):P

http://www.geocities.com/kl00tzakje/2934.JPG

it even booted @ 2943 mhz but after being 10 seconds in windows, my hard disk had a struggle :(

[daysleeper]

i see a lot of 2.9ghz with winchester 3200+ ... i got 2934mhz with 3000+ ;):P

http://www.geocities.com/kl00tzakje/2934.JPG

it even booted @ 2943 mhz but after being 10 seconds in windows, my hard disk had a struggle :(

i Had 3 x 3200+ 0441 and best one went through superpi8m around 2550Mhz 1,65v i had very bad luck :stick:

[zyx]

cpuz stable ;) :p:

[IvanAndreevich]

http://img87.exs.cx/img87/556/300x9prime95sfft0zu.th.gif (http://img87.exs.cx/my.php?loc=img87&image=300x9prime95sfft0zu.gif)

[Crmk]

http://www.crmk.de/2755mhz.jpg


I orderes the MSI but i wait and wait and wait ;)
I show a new screene when i have this board.
I hope i have more with this board!!

[Jaan]

My CPU: a64 3200+, winchester core, IHS removed (http://www.hot.ee/winchester/cpu-stepping.jpg)
I get 2750-2775Mhz stable, aircooled with Hyper6 and MSI Neo2+2x256MB BH5
Max stable HTT with LDTx3 in BIOS was app.370MHz (http://www.hot.ee/winchester/HTT371.PNG)
SuperPI 1M@ 270x10 is 30sec, pifast 275x10 was 42,72sec (http://www.hot.ee/winchester/pifast-275x10-42,72s.PNG)
at this settings I have 8245MB/s mem bandwith (http://www.hot.ee/winchester/Bandwitch-BH5-275x10-8345.PNG) and 32,8ns latency (http://www.hot.ee/winchester/latency-276x10-BH5-32.8.PNG)
and 3D test with X800PRO@500/1000Mhz (http://www.hot.ee/winchester/30086.PNG) give me the first 30K very easy :)
and finaly some cold air bench: (0 -5°C) -open window mod :D

SuperPi 1M-28sec (2922Mhz) (http://www.hot.ee/winchester/28sec-2922mhz.PNG)
SuperPi 2M-66sec(2885MHz) (1:06) (http://www.hot.ee/winchester/2M-66sec-2885MHz.PNG)
SuperPi 8M 320sec 2844Mhz (5:20) (http://www.hot.ee/winchester/8M-316x9-m259-5m20sec.PNG)

HexusPifast - 40,44sec (2925MHz) (http://www.hot.ee/winchester/40.44-2925MHz.PNG)

[CodeRed]

My CPU: a64 3200+, winchester core, IHS removed (http://www.hot.ee/winchester/cpu-stepping.jpg)
I get 2750-2775Mhz stable, aircooled with Hyper6 and MSI Neo2+2x256MB BH5
Max stable HTT with LDTx3 in BIOS was app.370MHz (http://www.hot.ee/winchester/HTT371.PNG)
SuperPI 1M@ 270x10 is 30sec, pifast 275x10 was 42,72sec (http://www.hot.ee/winchester/pifast-275x10-42,72s.PNG)
at this settings I have 8245MB/s mem bandwith (http://www.hot.ee/winchester/Bandwitch-BH5-275x10-8345.PNG) and 32,8ns latency (http://www.hot.ee/winchester/latency-276x10-BH5-32.8.PNG)
and 3D test with X800PRO@500/1000Mhz (http://www.hot.ee/winchester/30086.PNG) give me the first 30K very easy :)
and finaly some cold air bench: (0 -5°C) -open window mod :D

SuperPi 1M-28sec (2922Mhz) (http://www.hot.ee/winchester/28sec-2922mhz.PNG)
SuperPi 2M-66sec(2885MHz) (1:06) (http://www.hot.ee/winchester/2M-66sec-2885MHz.PNG)
SuperPi 8M 320sec 2844Mhz (5:20) (http://www.hot.ee/winchester/8M-316x9-m259-5m20sec.PNG)

HexusPifast - 40,44sec (2925MHz) (http://www.hot.ee/winchester/40.44-2925MHz.PNG)

very nice results :toast:

I especially like the 40 sec pifast on an air cooled winnie

try max async latency = 6ns, read preamble = 5ns, bypass max = 7x and read write queue bypass = 16x and you'll get under 40 sec

dont worry about CAS 1.5, cas 2 is the same ;)

[aCidbAbY]

here are my new stats:D :toast:
258 seems to be the sweet spot but you know i gotta post the 2.6 for bragging rights:D

[L@TrO]

i'v got a new 3dmark 01 score with stock cooling (woot 1st page :p)

-> http://service.futuremark.com/compare?2k1=8309589

The amd64 (3200+ nc) is clocked at 2650mhz but with kinda strange settings (9x295 ,1:1 2,5-3-3-7 T2 ) ,i realy can't get a high T1 o.c :( (think is the mem-contr).
And the 6800NU is clocked at 435/920 ,with 6vertex shaders 12pipes and 4 half working pipes

[overcrash86]

here are my new stats:D :toast:
258 seems to be the sweet spot but you know i gotta post the 2.6 for bragging rights:D

are-you in 2T ?

here is my personal 35s :

35s @2442Mhz (http://perso.wanadoo.fr/overcrash86/Overcrash86/3000+%2064/Chaintech/35s.jpg)

i think you can optimize more , i can do better with my PC2700 (she like lowes timing :D )here is with my old ADATA PC4000 ,now i havec one V-DATA which goes more ~280-290 stable with 2.76v :D

then with my PC 2700 noname her is my better SuperPI :
33s @2635Mhz (http://perso.wanadoo.fr/overcrash86/Overcrash86/3400+/33s2635Mhz.jpg)

[mushk1n]

here be mine, looks prime stable (testing it now)....

http://img94.exs.cx/my.php?loc=img94&image=heghegeaageg6oo.jpg

[claudiu.r]

my gaming rig

[graham_h]

the best board for overclocking would be ?

[=[PULSAR]=]

my gaming rig

A Newcastle @ 2.6Ghz with 1.52vcore, something just doesnt seem right. What kind of cooling are you using?

[MrQ3W]

=']A Newcastle @ 2.6Ghz with 1.52vcore, something just doesnt seem right. What kind of cooling are you using?
What's so amazing about that?
You do realize that there is very little difference between NC and WC OC's right? many 3200+ Winchesters hit 2600MHz and beyond so it is not that farfetched that a good NC 3000+ will do a 600MHz OC too.
Although that IS at the top end of the curve it isn't that unthinkable as say, 2.8GHz stable on air with a regular NC.

[claudiu.r]

to pulsar: stock ,no kidding, and my temps never reach 53 on full load, my top oc is 2746 but far from calling it stable. :toast:

[boblemagnifique]

My CPU: a64 3200+, winchester core, IHS removed (http://www.hot.ee/winchester/cpu-stepping.jpg)
I get 2750-2775Mhz stable, aircooled with Hyper6 and MSI Neo2+2x256MB BH5
Max stable HTT with LDTx3 in BIOS was app.370MHz (http://www.hot.ee/winchester/HTT371.PNG)
SuperPI 1M@ 270x10 is 30sec, pifast 275x10 was 42,72sec (http://www.hot.ee/winchester/pifast-275x10-42,72s.PNG)
at this settings I have 8245MB/s mem bandwith (http://www.hot.ee/winchester/Bandwitch-BH5-275x10-8345.PNG) and 32,8ns latency (http://www.hot.ee/winchester/latency-276x10-BH5-32.8.PNG)
and 3D test with X800PRO@500/1000Mhz (http://www.hot.ee/winchester/30086.PNG) give me the first 30K very easy :)
and finaly some cold air bench: (0 -5°C) -open window mod :D

SuperPi 1M-28sec (2922Mhz) (http://www.hot.ee/winchester/28sec-2922mhz.PNG)
SuperPi 2M-66sec(2885MHz) (1:06) (http://www.hot.ee/winchester/2M-66sec-2885MHz.PNG)
SuperPi 8M 320sec 2844Mhz (5:20) (http://www.hot.ee/winchester/8M-316x9-m259-5m20sec.PNG)

HexusPifast - 40,44sec (2925MHz) (http://www.hot.ee/winchester/40.44-2925MHz.PNG)

Very Good resultat ;)

[Killeroy]

http://520048665308-0001.bei.t-online.de/CPUz_2951MHz.JPG

GA-K8NF-9, Winnie 3200+, CBBHD 0444MPMW, IHS removed, air cooled (Thermaltake Silent Boost K8).
Too bad it isn't stable at those speeds :D

Killeroy.

[freestylercs]

What max. clock do you get stable ?

free

[Killeroy]

Around 2.7 GHz. It's very dependant on my room temperature...

Killeroy.

[robocopy]

My 3200+ Winchester on Dry Ice

http://hem.wasadata.net/2501/turez/3200+/3206MHz1.JPG

More screens: http://hem.wasadata.net/2501/turez/3200+/
Rig screens: http://hem.wasadata.net/2501/turez/DI/

[reLo]

i see a lot of 2.9ghz with winchester 3200+ ... i got 2934mhz with 3000+ ;):P

http://www.geocities.com/kl00tzakje/2934.JPG

it even booted @ 2943 mhz but after being 10 seconds in windows, my hard disk had a struggle :(


what is cpu code ????? spmw???

[drcrawn]

Working my way up after getting my Promise 33/66mhz pci sata card yesterday. Due top lack of bus locks, my previous high FSB was 224, stable at 2-3-2-6. Couldnt go higher without OS corruption.
Well must say I am happy with the pci card so far.

Had to bump up vdimm to max on my board 2.8v to get this pi stable. I need to get to 2620mhz at least I think for this to be worth it over 220x12 without relaxing the timings. Having fun playing though... Nice to be above 230FSB, period. Gonna see if this is stable in games before going any higher. Got some fans over mem, doesnt seem to be getting too hot, but we'll see after I torture it a little bit. Wish me luck!

235 is all she's got @2-3-2 with t1 @2.8v, not bad though considering its rated for 217 max with these timings. Gonna try 2-4-3-7 per the spd timings table...

http://img37.exs.cx/img37/5904/235fsb1bc.jpg

[mrBEE]

Well I'll add my settings to the mix. Memory clocked down with tightest timings as experiment. It seems more stable and the applications I use doen't really need a whole lot of bandwith. Right now it's 5700mb/s according to SiSoft Sandra '05.

Shuttle SN95G5 with standard heatsink and 1750rpm 92mm fan.
AMD Athlon64 3800+ 2.6Ghz 12x217 1.55V
2x 512mb Corsair XL 2-2-2-5 1t 350mhz (tightest setting available in A64 Tweaker)

A modest oc, but it's prime95 stable so I'm happy :)

[PcCI2iminal]

first run with winny 3000+ @ 305 HTT
Asus A8N-SLI Deluxe /dual 6800s/raptor/Sanmax 339 bh5 ddr 333 512 x 2 and no booster in use.
http://galeon.hispavista.com/pccriminal/img/2750.JPG

[kiwi]

Newcastle 3200 @ 2720 1.75V

Unfortunately not stable, last stable around 2.6Ghz


http://img124.exs.cx/img124/2376/27204xz.jpg

[ziberia]

Too drunk to remember if I posted this already...

[Alec]

:eek: oh my! you guys geting speeds of 3GHz+ must have stupidly fast pcs.
Ive only managed to get 2.5GHz out of mine so far :( Though I am hoping to get higher speeds after a few more RAM tweaks...

:toast:
Alec

[K32A]

Ey,

I got this 3000+ winnie CBBFD 0437 VPCW - Have you heard of that stepping, and what is the average clock results ?

[Joe_Beasley]

Here is my overclock. I can get to windows and get errors in SuperPI at as high as 2.78Ghz, but this is what i run day in day out, as it is as stable as can be. What i like is my voltage is just as low, or lower, than the original settings. Funny thing is, i can go up to 1.75v and it still wont be stable for benching at anything past 260...

BTW, this is on stock cooler with Ceramique instead of Thermal pad. Winchester core, 0441 model.

Newegg.com retail purchased 12/14/04

http://home.comcast.net/~orangeparktech/screenie.JPG

[=[PULSAR]=]

Wow system temp 6C colder than CPU temp. Try cutting down on that system temp and youll improve quite a bit. Nice OC with that voltage BTW!

[stelleg151]

dont know how to post screenshot, but have my week 35 winnie at 2.5 at 1.65vcore, unsure about temps, but seems to be ok with xp-90 on there, and got my old trusty geil running at 227 @ 2.5-4-3-10, and its pretty good, although having some issues with counter strike source, working on figuring them out.

Oh yeah, with x700pro@ 500/1080 or so I am at the top of the x700's on ARC and ORB '05. Top 5 in x700 in 01 and 03.

Superpi 1m @ 2.5= 34 seconds

[=[PULSAR]=]

stelleg151 you take a screenshot by pressin the printscreen button on keyboard and go into paint and paste, save and your all set.

[Joe_Beasley]

So what does that system temp do for me? I could always put some ceramique on it, but im not sure if it would make anything overclock any higher or not.

[=[PULSAR]=]

Lower system temp...lower cpu temp. Or is your MB just laying on the table? Whats the usual ambient temp of the room?

[K32A]

Damn, i just dont get it ...

How can u go so high with so little vcore?

My 3000+ will only do ~2520mhz at 1.6vcore :(

[Joe_Beasley]

No its in a case. This is a 24/7 PC. Im going to try some AS5 on it soon and see if i can push this CPU further afterwards.

and K32A, i just dont know, can't explain it, but it works...lol...Maybe my CPU is able to go higher and my chipset is really just needing to be cooled better. Ill try some things within the week to see.

[misteroadster]

3000+ w/55's Box HSF 14° Ambient
http://pageperso.aol.fr/misteroadster/28s2915.JPG
http://pageperso.aol.fr/misteroadster/Winnie3072.JPG

[K32A]

No its in a case. This is a 24/7 PC. Im going to try some AS5 on it soon and see if i can push this CPU further afterwards.

and K32A, i just dont know, can't explain it, but it works...lol...Maybe my CPU is able to go higher and my chipset is really just needing to be cooled better. Ill try some things within the week to see.


Yeah, well im also using the stock cooler, so maybe i have to buy a better one :)

[Joe_Beasley]

Im using stock heatsink with ceramique. Try that first.

[Brandybuck]

misteroadster@ , great cpu.... :slobber:
code?... :rolleyes:

[misteroadster]

3000+ 0448 SPAW
Max screen improved , WR (AMD aircooled) :)
http://pageperso.aol.fr/misteroadster/WRaircoolmini.JPG

[Alec]

Just managed to run 3d mark 2001SE on my 3200+ when overclocked to 2.4GHz.
http://host366.net/pics/overclock/omfg.JPG
Now aiming to see what the highest speed I can get out of my chip for SuperPi. I have passed the 2.6GHz barrier now. Shall try got 2.65+

Alec

[funkflix]

3000+ 0448 SPAW
Max screen improved , WR (AMD aircooled) :)
http://pageperso.aol.fr/misteroadster/WRaircoolmini.JPG

Huh, 22°C CPU 25°C System? Is this with an Neo2?

Btw, great result! :toast:

[misteroadster]

no , K8NXP SLI , case temp is always 25°.

[funkflix]

Ah ok. What was the ambient-temp. to get 22°C?

[misteroadster]

About 8°C

[funkflix]

The max. i can manage with "normal" roomtemps. It's with "open-window-mod", but watercooling doesn't takes an effect from it, just sys-temp. ;)

http://people.freenet.de/funkflix/3018mhz.jpg

[=[PULSAR]=]

3000+ 0448 SPAW
Max screen improved , WR (AMD aircooled) :)
http://pageperso.aol.fr/misteroadster/WRaircoolmini.JPG

Which AMD aircooler fx-55?

[overcrash86]

=']Which AMD aircooler fx-55?


yes ,mister roxx :up:

FX-55 box
+ open window

HIGH-CLOCK (http://www.biwa.ne.jp/~yok/HIGH-CLOCK.htm)

http://www.biwa.ne.jp/~yok/

[misteroadster]

thanks over :toast:

[Zanr Zij]

3000+ 0448 SPAW
Max screen improved , WR (AMD aircooled) :)
http://pageperso.aol.fr/misteroadster/WRaircoolmini.JPG

:slobber: air ????

[misteroadster]

yes , FX55 HSF :D

[furyfax]

I notice that the 3500+ 90nm CPU is fairly rear, I have just received this CPU myself, but I cant test it at the earliest friday. Also ordered Corsair PC4400 which have the following timings 2,5-4-4-8.
How much do you think I can OC this CPU on stock fan cooler. I have ordered ThermalTake BigWater which will cool my CPU at a later time. I am abit concerned because I have read alot about my mainboard ( ASUS A8N SLI DELUXE ) having problems with TCCD chips? Anyone else got TCCD memory on this mainboard ?

Regard,
Paul

[htkm1]

I notice that the 3500+ 90nm CPU is fairly rear, I have just received this CPU myself, but I cant test it at the earliest friday. Also ordered Corsair PC4400 which have the following timings 2,5-4-4-8.
How much do you think I can OC this CPU on stock fan cooler. I have ordered ThermalTake BigWater which will cool my CPU at a later time. I am abit concerned because I have read alot about my mainboard ( ASUS A8N SLI DELUXE ) having problems with TCCD chips? Anyone else got TCCD memory on this mainboard ?

Regard,
Paul

Yeah I was woundering the same thing. Any reason for being rear ??? Even the 3500+ NC a few only.
Is it because 3500+ O/C's around 2.6~2.7Ghz, same as 3000+ or 3200+? therefore ppl just buy the 3000+ or 3200+. But the Memory Controller on the 3500+ should be better right?
I have seen a A64 3500+ NC with 0421SPMW Batch. anyone know if it's good O/C batch?

[BerT]

If i resume a bit all of this results I can derive that
A winchester 3200+ with a msi neo2 is the best option for overclockers ?

[htkm1]

If i resume a bit all of this results I can derive that
A winchester 3200+ with a msi neo2 is the best option for overclockers ?

Yes, and with Samsung TCCD RAMs. G.Skill LE or LA.

[BerT]

But still i read some reviews where the msi had a lot of little bugs like the sata port etc ...
And what about the voltages etc ...
I have bh5 and ocz pc4000 ....

But I'll look for some info about the board and consider buying the msi with the 3200+ winchester ( or other model ???? )


Now i will stop ruining this thread up

[htkm1]

But still i read some reviews where the msi had a lot of little bugs like the sata port etc ...
And what about the voltages etc ...
I have bh5 and ocz pc4000 ....

But I'll look for some info about the board and consider buying the msi with the 3200+ winchester ( or other model ???? )


Now i will stop ruining this thread up

Go here >>
http://www.xtremesystems.org/forums/showthread.php?t=46730
You'll find everything you'll need to know about MSI and more.
- SATA, use 3 or 4
- Voltages, Refer to the link. either you use a Beta Bios that can do high voltages or do a Vcore mod.
- RAMs, Get a OCZ Booster. It works on this mobo. again refer to the link if you want to do Vmods for this mobo. :)

[BerT]

That are a lot of things that could occur ...

I"think about it but I am a bit sceptical though...
Are there new revisions ?

Wich cpu type ? 3200+ ?

[Mima]

http://www.home.no/f-14jmr/Ola%20(Mima%20%5c%20SilentPerv)/Litt%20info.JPG
mach2
DFI 250gb lput
Enermax 460w
OCZ plat rev2.

[misteroadster]

Improving the AMD aircooled WR :
M/B is now K8NS 939 , ram is MDT 512X2
FX55 HSF 9° ambient
http://pageperso.aol.fr/misteroadster/WRaircoolmini2.JPG

[Alec]

http://www.home.no/f-14jmr/Ola%20(Mima%20%5c%20SilentPerv)/Litt%20info.JPG
mach2
DFI 250gb lput
Enermax 460w
OCZ plat rev2.
Thanks for posting that screeny. The RAM timings section was very helpful and has enabled me to run my RAM at a nice CAS2.5 instead of CAS3 :)

Misterroadster,
thats one sweet overclock! Well done man :toast:

Alec

[Mima]

Will a 3ghz clawhammer be better then a winnie at the same speed ?

[Ferry82]

The winnie will win i believe!

[=[PULSAR]=]

The winnie is faster clock for clock, a winnie with speeds of that clawhammer above would get a 27 second SPI time.

[DK-Ajak]

Hello.. i have just startet overclocking my new Winchester 3200+ Week46.
The setup is cooled på home made watercooling and running quiet :)

http://overclocking.dk/img/users/35572_02.jpg

[Crmk]

That is nice.

~ 200 MHz Memory and 27XX MHz CPU and 31 Sek.
That's more than nice ;)

[misteroadster]

Last year, without A64 tweaker.
http://pageperso.aol.fr/misteroadster/31s.JPG

[DK-Ajak]

i cant get it under 31sec, i use no tweaks of eny kind on my system.. i just ordered a Mach 2 modded whith R404a, so i can get even higher and maby get a lower SuperPI, but who knows if i get lower score i will post them right away

[daysleeper]

I finally thought that i will give one and last try to find better procssor.So i sold my old 3000+ and bought new 3000+ (week 47).And yes this time i got chip that is ok :p: ...every chip before this couldn't got ovet 2550Mhz and this one i get ~100Mhz higher....example =>superpi8M (http://www.kotinet.com/kai.nurkkala/kellotusta/suppa8m5_59.JPG)

[Kamerat]

Got a Winchester 3000+ week 47:
29s Super Pi @ 8,5x362MHz. (http://home.no.net/comerade/pc/superpi_winchester_3000_362x8,5.png)
Highest post @ 3,3GHz 9x366, at this HTT my mobo have big problems. :p: (http://home.no.net/comerade/pc/unstable_winchester_3000_9x366.jpg)

[ZxCs]

I hit 2.75 ghz on my opterons, Im sure thats some sort of record, will post screenshot when my website goes back up :toast:

[daysleeper]

Got a Winchester 3000+ week 47:
29s Super Pi @ 8,5x362MHz. (http://home.no.net/comerade/pc/superpi_winchester_3000_362x8,5.png)
Highest post @ 3,3GHz 9x366, at this HTT my mobo have big problems. :p: (http://home.no.net/comerade/pc/unstable_winchester_3000_9x366.jpg)
Awesome result and some :stick: amazing :stick: luck!!!!.How many you bought to have so good processor?? ;)...i hope you sell that to me when you sell it :toast:

[Alec]

:| woah!! thats one sweet overclock, kamerat!! :toast:
Keep up the awsome clocks mate.
Alec

[Formann]

Got a Winchester 3000+ week 47:
29s Super Pi @ 8,5x362MHz. (http://home.no.net/comerade/pc/superpi_winchester_3000_362x8,5.png)
Highest post @ 3,3GHz 9x366, at this HTT my mobo have big problems. :p: (http://home.no.net/comerade/pc/unstable_winchester_3000_9x366.jpg)

You forgot to mention you are running an r404a modded Mach2 my friend. :)

[NiSMo]

lol, no wonder y his o/c is so damn sweet :P

im still deciding if i should downgrade...to a 3000+ wit a nice stepping and o/c the :banana::banana::banana::banana: outta it...:S

[ilgreco1974]

Improving the AMD aircooled WR :
M/B is now K8NS 939 , ram is MDT 512X2
FX55 HSF 9° ambient
http://pageperso.aol.fr/misteroadster/WRaircoolmini2.JPG

351mhz system bus?????Awesome!!!! :toast:
I thouht that the top htt was 310-315mhz on k8n neo2...

[Kamerat]

You forgot to mention you are running an r404a modded Mach2 my friend. :)
Sorry master... :( :p:

Had a run at 3135MHz last night. (http://home.no.net/comerade/pc/superpi_winchester_3000_9x348.png)

Thanks guys! :toast:

[misteroadster]

351mhz system bus?????Awesome!!!! :toast:
I thouht that the top htt was 310-315mhz on k8n neo2...
It's not neo2, but cheapest gigabyte M/B NF3 : K8NS 939 :)

I did this with both K8NXP-SLI and K8NF9 4X :
http://pageperso.aol.fr/misteroadster/400FsbRock.JPG

[Alec]

sweet overclock mate! :toast:

[Kamerat]

351mhz system bus?????Awesome!!!! :toast:
I thouht that the top htt was 310-315mhz on k8n neo2...
Think most Neo2's does up to 350-365MHz HTT, but the have problems with RAM dividers other than "100MHz" when you pass 300-315MHz... :mad:

[ilgreco1974]

Think most Neo2's does up to 350-365MHz HTT, but the have problems with RAM dividers other than "100MHz" when you pass 300-315MHz... :mad:

Thanks for reply,but what you mean with RAM dividers other than "100MHz",that i have to set the divider at 100mhz with any kind memory i will use?
I plan to change my ring(dfi lp nf3 3200+@2550mhz DTR) with a neo2+3000 winchester+tccd mem and i'm interesting of it... :)

[GinTonic]

Heys!

What's the referrence of your cpu? Like the number of the week and vcore?

Tks!

[Kamerat]

Thanks for reply,but what you mean with RAM dividers other than "100MHz",that i have to set the divider at 100mhz with any kind memory i will use?
I plan to change my ring(dfi lp nf3 3200+@2550mhz DTR) with a neo2+3000 winchester+tccd mem and i'm interesting of it... :)
Tried both my Corsair XMS3500 BH-5 that does 270MHz 1:1 and my Geil PC3700 that does about the same with the same result. With the "100MHz" divider your RAM will run the half speed of your HTT. I'm not the only one with this problem, don't know if there's any other board with this problem. If you want the Neo2-board go for the 3200+ instead of the 3000+, the 10x MP will help alot.

[JulianDelphiki]

http://www.iupload.net/102004/IWINTHEGAME2.JPG


stock cooler right now, hooking it up to the chiller when i get off work : )

edit: oh yeah, its on an Abit av8 =o

[claudiu.r]

its not a winnie!.....

[blinky]

http://www.iupload.net/102004/IWINTHEGAME2.JPG


stock cooler right now, hooking it up to the chiller when i get off work : )

edit: oh yeah, its on an Abit av8 =our from genmay arent ya?

[JulianDelphiki]

ur from genmay arent ya?


no....

Allnighte

[HARDCORECLOCKER]

:D O.K. - here we go:

http://de.geocities.com/hardcoreclocker/Arithbench15403.JPG

and one more:

http://de.geocities.com/hardcoreclocker/Screen3360.JPG

and here it's really maxed out ;) :

http://de.geocities.com/hardcoreclocker/10x348.JPG


Keep on clockin' guys !!! :toast:

[V1nce]

Still waiting for the parts of my watercooling, but with boxed cooler i managed this...

http://img31.exs.cx/img31/6920/pifast42192lc.jpg

[freeloader]

My 0441 did 2.6ghz@1.65vcore on a MSI Neo 2 Platinum. No world record, but it was damn fast.

[BerT]

just bought my 3200+

Green

Amd athlon64 3200+
ADA3200DIK4BI
CBBHD 0449GPHW
......

along with neo2 from msi and the ddr booster.


Is this good stepping etc ...
Is brown or green the best ?

[funkflix]

Some results from benchsession 1 hour ago.

http://weber-steuerungstechnik.de/overclock/277mhz.jpg

http://weber-steuerungstechnik.de/overclock/under40.jpg

http://weber-steuerungstechnik.de/overclock/3000mhzspi.jpg

http://weber-steuerungstechnik.de/overclock/3120mhz.jpg


All watercooled.

[overcrash86]

just home made watercooling :D :

http://membres.lycos.fr/overcrash/64-M%203400+/2993Mhz.jpg


ill try next week an 3000+ 939 0446 SPCW (thanks misteroadster ;) ) and DFI NF4 :banana4:

for cooling details :D :

http://membres.lycos.fr/overcrash/vantirad%20AX/PICT0054.jpg
http://membres.lycos.fr/overcrash/vantirad%20AX/PICT0052.jpg
http://membres.lycos.fr/overcrash/vantirad%20AX/PICT0049.jpg
http://membres.lycos.fr/overcrash/vantirad%20AX/PICT0048.jpg

[=[PULSAR]=]

GraveDigga really nice clocks. What week is that winchester and how much vcore for that 3.12Ghz and how cold was it outside when you did that?

[funkflix]

=']GraveDigga really nice clocks. What week is that winchester and how much vcore for that 3.12Ghz and how cold was it outside when you did that?

Thx. It was about - 4°C outside, but its hard to get the same temps as u have with aircooling outside. As u can see @ the screen above, the Cpu is around 35°C. Vcore is 1,75V. :)

[Formann]

My new Winnie sucks like no one before it.

Under a modified Mach2 (by Overklokk) -41c load it does Prime SmallFFT @ a whooping 2700Mhz .. LOL

This Winnie must be the worst ever made. Along with all the others that I have.


My bad luck is starting to make me depressed.

[K32A]

Then tell us what stepping we shouldnt buy :)

[Formann]

Then tell us what stepping we shouldnt buy :)


Ahh.. i forgot.

The ones i remember:

0450VPBW
0446TPBW
0447VPFW (2700Mhz 1.81v r404a MachII cooled)

Max on air is ~2600Mhz.


Im looking for a 0448SPAW .. know where to get one? Please PM me :)

[Zeus]

Ahh.. i forgot.

The ones i remember:

0450VPBW
0446TPBW
0447VPFW (2700Mhz 1.81v r404a MachII cooled)

Max on air is ~2600Mhz.


Im looking for a 0448SPAW .. know where to get one? Please PM me :)

Don't let it bring you down mate, these winnies really seem to be hit or miss.

One day you'll hit! ;)

[blinky]

no....

Allnightehehe

...shens

[Formann]

Ahh.. i forgot.

The ones i remember:

0450VPBW
0446TPBW
0447VPFW (2920Mhz 1.81v r404a MachII cooled)

Max on air is ~2600Mhz.


Im looking for a 0448SPAW .. know where to get one? Please PM me :)


EDIT:

Tried to run 100Mhz on RAM, and suddenly I was able to run super-pi at 2920Mhz. 265/270HTT is max with divider (except 100Mhz)
Diddn´t tink the MSI would give me problems at sub 310-320HTT. crap.. :(

[sevenka]

// link removed.

[pazza316]

Hi Guys,

I wish to get a VCore of 1.8 with a Winni on the MSI Neo 2 plat. I have phase change cooling - 47.5 so i feel this is safe. But when I apply this voltage with core centre it gives me 1.7, when I apply 1.85 in Core Centre I get 1.75 I need about 1.8 volts. With the winni how do I do this?

[funkflix]

Hi Guys,

I wish to get a VCore of 1.8 with a Winni on the MSI Neo 2 plat. I have phase change cooling - 47.5 so i feel this is safe. But when I apply this voltage with core centre it gives me 1.7, when I apply 1.85 in Core Centre I get 1.75 I need about 1.8 volts. With the winni how do I do this?

http://www.xtremesystems.org/forums/showthread.php?t=52068&goto=newpost

[daysleeper]

Jep i finally got 1 second of from my record and 5 seconds from my 8m record :cool: superpi1m_32s (http://www.kotinet.com/kai.nurkkala/kellotusta/suppa1m_32s.JPG)...superpi8m_5m54s (http://www.kotinet.com/kai.nurkkala/kellotusta/suppa8m_5m54s.JPG) but i hope i can go under 20seconds in pifast pifast (http://www.kotinet.com/kai.nurkkala/kellotusta/pifast_20,41.JPG)..

[Formann]

Got tired of running my 3200+ winnies. This crappy MSI wont run RAM dividers over 260-265HTT. So I installed my old 3500+ NewCastle and put it under the r404a cooler Overklokk built for me :)

Super-pi 1M - 28sek (http://privat.bluezone.no/forman/images/28sek.JPG)
A64 3500+ NC @ 2950Mhz - 268*11
Twinmos BH5 @ 268 2-2-2-5 (codered tweaked)
Crappy 2000 install..

Max super-pi stable speed is 273*11. Dont know if its the CPU or the memcontroller stopping me. Maybe ill try max CPU speed with 100Mhz div on RAM.

[V1nce]

that's right about the dividers with some types of memory. My Twinmos SP didn't divide either, so i got stuck at 10x250 so that sucked big time! But kingston hyperx (BH5) for example, is dividable.

[Digg]

3000+@2.6Ghz@1.40v

12h prime (http://mitglied.lycos.de/meinnamegehtnicht/2600@1.40v.JPG)

sys@sig ;)

edit: System (http://www.nethands.de/pys/show.php4?user=Digg)

[daysleeper]

3000+@2.6Ghz@1.40v

12h prime (http://mitglied.lycos.de/meinnamegehtnicht/2600@1.40v.JPG)

sys@sig ;)

edit: System (http://www.nethands.de/pys/show.php4?user=Digg)
and the producing week was...?

[Digg]

and the producing week was...?

0450 VPEW

[Giasan]

DFi nf3 250 gb
2x512 OCZ Plat Rev 2 Pc3200
R.S. all day

http://img240.exs.cx/img240/3995/27008vi.jpg

http://img205.exs.cx/img205/3174/2700mem1uj.jpg

http://img212.exs.cx/img212/1356/misto1de.jpg


:banana:

[CapFTP]

hey Giasan...already saw that screen....

:toast:

[Giasan]

hey Giasan...already saw that screen....

:toast:


Hi Cap, i know :D :D

[L0$t Pr0PhEt]

http://users.pandora.be/dajefn/pc/overclocking/2763MHz.JPG

CBBHD 0450WPBW boxed cooler
stable at 9x300 1.6V (200MHz 2.5-2-2-5) all day long D2OL

[Crmk]

is that normaly?

http://www.crmk.de/400FsbRock.jpg

[Crmk]

is that normaly?

http://www.crmk.de/400FsbRock.JPG

[L0$t Pr0PhEt]

Install version 1.26.

[joe2004]

http://www.crmk.de/400FsbRock.JPG

It is amazing to get 2.8 with 3000 since that is 1 GHz overclock but you should get some better memory with that. I get better superpi than this with 150 MHz lower clocked processor. Your superpi is rather bad given the clock. Needs to be at least 1 minute faster, or better.

[jhatfie]

DTR 3000+ CAAZC 0501 DPMW. Still working on it, but 2700mhz at 1.68v is not to shabby for a clawhammer.

http://home.comcast.net/~jhatfie/superpi_32M_2700.jpg

[Dani]

Install version 1.26.
No, 1.27 :D

[FutureOfTheKing]

is there anyone who using AMD athlon 64 3000+(winchester)0,09 nm :cool:

[misteroadster]

+89% :banana: 4800+ Frequency :D
http://pageperso.aol.fr/misteroadster/3405.JPG

[funkflix]

Really impressive! :slobber:

Cooling?Temps?Vcore Mod?

[Interloper_PL]

A64 3000+ 0450 WPBW On Air Unfortunately my motherboard is completely unstable with fsb330 and higher :( With Clockgen i can push it up to 3070Mhz Im still waiting for my DFI...

http://members.lycos.co.uk/obligator/3.0Ghzs.JPG

[kiwi]

Winny 3200+ CBBHD 0450RPAW @ 2776Mhz 1.7V

cpuid validation:
http://valid.x86-secret.com/show_oc?id=2819

http://img41.exs.cx/img41/56/2778dl.jpg


Can go more but not stable and no pi can be calculated
http://valid.x86-secret.com/show_oc?id=2820

http://valid.x86-secret.com/cache/2820.png

[ojdr2001]

FX55 cooled by R404a Mach1
DFI NF4 U

Screenie. Not stable
Still finding max stable on DFI

http://www.ojdr2001.com/3538.JPG

[overcrash86]

What is the Winnie FSB/HTT record for the moment :confused:

I just do it for fun :D :

http://membres.lycos.fr/overcrash/3000+%20939/FSB484.JPG

CPU-Z Validated (http://valid.x86-secret.com/show_oc?id=3241)

i think the 500Mhz HTT is possible :banana4: i work it :D

i can go to 488 ,but the print screen doesn't work :rolleyes:

[EclectiK]

What is the Winnie FSB/HTT record for the moment :confused:

I just do it for fun :D :

http://membres.lycos.fr/overcrash/3000+%20939/FSB484.JPG

CPU-Z Validated (http://valid.x86-secret.com/show_oc?id=3241)

i think the 500Mhz HTT is possible :banana4: i work it :D

i can go to 488 ,but the print screen doesn't work :rolleyes:

Another record for overcrash :rolleyes:

[Dissolved]

Another record for overcrash :rolleyes:

But its only stable for a screen shot.. i dont see how that can be a record if he cant bench :\

[EclectiK]

But its only stable for a screen shot.. i dont see how that can be a record if he cant bench :\

No one says he can't bench... :)

[zoom314]

Well an FX-55 at 3.5GHz is impressive, Heck all My cpus are just air cooled right now. :D

http://mysite.verizon.net/zoom314/2544.jpg

[overcrash86]

But its only stable for a screen shot.. i dont see how that can be a record if he cant bench :\

:D

http://membres.lycos.fr/overcrash/3000+%20939/fsb505spi.JPG

FSB 507Validated by CPU-Z (http://membres.lycos.fr/overcrash/3000+%20939/FSB507.jpg)

Validation link (http://valid.x86-secret.com/show_oc?id=3349)

MAX Screen at 508 :

http://membres.lycos.fr/overcrash/3000+%20939/FSB508.jpg

there is my new records and probably for the moment the WR ?!?

[overcrash86]

http://img.photobucket.com/albums/v121/johntan16/Benchmarks/Prime35002.jpg


what is your cooling ?

[dfx]

Phase change

[xavicl]

Lol! , i got 2700 with air...is worst to put phase change for only 100Mhz more?
http://img151.exs.cx/img151/3433/superpi270041td.th.jpg (http://img151.exs.cx/my.php?loc=img151&image=superpi270041td.jpg)

[TekXoID]

Highest stable:
http://img223.exs.cx/img223/9163/ztkoc4lf.th.jpg (http://img223.exs.cx/my.php?loc=img223&image=ztkoc4lf.jpg)

[fatbird2046]

939 3000+
0442sprw
chilledwater
1.65-1.7v 2.7g--can finish pi 1m&3dmark03/05 but not stable~~~~
1.5-1.6v 2.6g

[boshi]

3700+ clawahmmer CG, I'm getting 2.75 on air with 1.7v. I plan to vmod and push higher.

[BigBen]

1.55V on the CPU 2.7V for the Ram everything else set to auto ... I run at 270x10 with the mem at 1to1

[saaya]

welcome to XtremeSystems! :toast:

btw, it says 1.66v in cpid, not 1.55v ;)

heres my 3200+ CBBHD 0449 GPMW winchester, just installed it yesterday and am still trying to find the max speed :)

heres what i got so far:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=25638&stc=1


it does 2.4ghz at 1.4v and 2.55-2.6ghz with 1.5v still testing stability at 2.6ghz though

[BigBen]

welcome to XtremeSystems! :toast:

btw, it says 1.66v in cpid, not 1.55v ;)



Thx for the welcome :)

lol where does it say 1.66V? :confused: I tried cpuz and that said 1.536v

[Crmk]

508 MHz ........ :slobber:

[saaya]

Thx for the welcome :)

lol where does it say 1.66V? :confused: I tried cpuz and that said 1.536v

sorry, nvm, it says 1.566v in the cbid shot :) i read it as 1.66 :D my bad :)


508 MHz ........ :slobber:
2.6ghz is most likely stable as well, i just didnt go above 1.55v yet wich actually results in 1.53v :D

i think i can get 2.65 or 2.7 with enough vcore, and with my aircooled 80W tec i might even reach 2.8ghz :D

[zoom314]

So far the Fastest FX-55 cpu that I know of and have read about is over at Hexus.net and at near 3.5GHz It's movin fast, Like near LightSpeed, Linkage: http://www.hexus.net/content/reviews/review.php?dXJsX3Jldmlld19JRD0xMDAy

[overcrash86]

508 MHz ........ :slobber:


http://membres.lycos.fr/overcrash/3000+%20939/spi515mini.jpg
http://membres.lycos.fr/overcrash/3000+%20939/FSB520.jpg

http://valid.x86-secret.com/show_oc.php?id=3953

but the WR is now of 543Mhz ,i'm only second :( :

http://valid.x86-secret.com/records.php

[naelq]

overcrash86, nice background! :D :banana: (god, those banana's are addicting!!)

[overcrash86]

overcrash86, nice background! :D :banana: (god, those banana's are addicting!!)


thanks :D

[Jaite]

Highest stable:
http://img223.exs.cx/img223/9163/ztkoc4lf.th.jpg (http://img223.exs.cx/my.php?loc=img223&image=ztkoc4lf.jpg)


I cant figure out how you get 33s in superpi at 325 fsb and 260 mem, while I get 34 at 300 fsb x8 and 200 mem :/ 3200+ winchester in an SN95G5 barebone.

[Crmk]

@ overcrash86


That is extrem heavy :slobber: :slobber: :slobber: :slobber:

[dfx]

http://img.photobucket.com/albums/v121/johntan16/Benchmarks/3ghz3200.jpg

[TMM]

3200+ winnie 0504 (forget the stepping, didn't write it down :rolleyes: )

2600mhz prime95 stable @ 1.7v :/

but if i back off to 1.65v i still get 2580mhz prime95 stable, so that seems to be the sweet spot :)

[PcCI2iminal]

but the WR is now of 543Mhz ,i'm only second :


:slobber:

nice,very nice

FX air cooled
http://img234.exs.cx/img234/2554/30206dk.jpg


3040mhz (http://valid.x86-secret.com/show_oc?id=5196)

[Sh0r_ty]

im running my 3200 at 2.6 with my A8N-SLI Delux vcore 1.47 My present problem is that i can't get vcore any higher in the bios. I can run 2.5ghz stable with stock vcore.

i got some geil value running ddr460 3-3-3-5 1t can run ddr480 3-3-3-5 1t

[FireDragon]

ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271

3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...

[overcrash86]

ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271

3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...

0503 :confused:

[rzonealley]

ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271

3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...

seem like urs is from the same batch as mine
ADA300DIK4BI
CBBID 0503EPJW
1193319A50124

so far stable at 2.43 at 1.64vcore...seems like the newer batch need a lot of juice to reach high clock... wonder why clock gen didnt work well on my setup... have to play with bios for evrythings...

[eva2000]

3500+ Newcastle CAA2C 0505 APMW
MSI K8N Neo2 0444A2 chipset with Corsair Hydrocool 200 cooled cpu
2x 256MB KHX3200K2/512 BH-5
80GB WD 800JB
550W GTR Black PSU 38A/12v rail :cool:

stock vcore 1.47 = 11x 250HTT = 2750mhz

http://fileshosts.com/AMD/MSI/K8N_NEO2/chipset/chipset_014.JPG

max pifast passable

1.6v = 2835mhz
1.65v = 2866mhz

using divider to test cpu max limits

http://fileshosts.com/AMD/MSI/K8N_NEO2/3500_CAA2C_0505_APMW/Kingston/KHX3200K2/2x256/17_3/LDT3x/260-168-2226-8-9-2213-1T-1.65-2.85-1.6/superpi-1m_tn.jpg


3dmarks ran in same windows session

Gecube 9800Pro Extreme stock speed @398/351

http://fileshosts.com/AMD/MSI/K8N_NEO2/3500_CAA2C_0505_APMW/Kingston/KHX3200K2/2x256/17_3/LDT3x/260-168-2226-8-9-2213-1T-1.65-2.85-1.6/3dmark/3dmark2003_9800pro_398-351_6652_session_tn.jpg

http://fileshosts.com/AMD/MSI/K8N_NEO2/3500_CAA2C_0505_APMW/Kingston/KHX3200K2/2x256/17_3/LDT3x/260-168-2226-8-9-2213-1T-1.65-2.85-1.6/3dmark/3dmark2001_9800pro_398-351_22962_session_tn.jpg

http://fileshosts.com/AMD/MSI/K8N_NEO2/3500_CAA2C_0505_APMW/Kingston/KHX3200K2/2x256/17_3/LDT3x/260-168-2226-8-9-2213-1T-1.65-2.85-1.6/renderbench_tn.jpg

http://fileshosts.com/AMD/MSI/K8N_NEO2/3500_CAA2C_0505_APMW/Kingston/KHX3200K2/2x256/17_3/LDT3x/260-168-2226-8-9-2213-1T-1.65-2.85-1.6/everest_cpu.jpg

amazing :)

[Athens[2004]]

just paintstable . :banana: :banana4: :banana:

0447. 3.0+ msi k8n neo2 with no mods [yet] . :toast:

fullbenchable @ 2.85~ 1.75vcore [testing]
fullstable @ 2.7~ defaultvcore
< 2.6ghz @ full stable undervolted
winbootable 200*9 @ 0.9vcore

watercooled.

[TheMeatFrog]

3000+ 0444 MPM 2.7GHz @ 1.6v :)
Cooled by a thermalcrap heatsink and tornado fan

[fareastgq]

a64 winnie 3000
CBBHD 0449 MPM

far as I know, I have the only and latest CBBHD MPM chip, haven't seen anyone else post the exact same stepping.

suicide oc's, 2.6 at 1.4 volts, 1.7 volts only yielded 2.8, this is on stock cooler air, NOT tested for stability, only sandra benched, will post screenies and edit this when I get water with 24/7 memtest/3dmark stable tests, as max mhz mean little except for benching and bragging rights.

[Sh0r_ty]

hmm well my best stable tested system is 2.6ghz at 1.5vcore. i can get 4ghz on my 3200 in bios il post some pics in a sec

[Sh0r_ty]

i know that its not the best as its only bios but it is with stock cooling as those last pics show. btw they were with a not great digital cammera but those last pics are of my stock fan just to show im using it not liquid or phase change

[Levish]

3500+ Newcastle
250x10 @ 1.56v
166mhz mem 2,2,2,5,1T @ 2.8v
http://www.liviulois.com/images/cpu.JPG
http://www.liviulois.com/images/mem.JPG
http://www.liviulois.com/images/superpi.JPG

[babyelf]

I have
ADA3500DEP4AW
CBAUC 0420SPMW

currently doing 250x10 = 2.5ghz at 1.6Vcore

here's a screenie
NOTE* in the screen shot prime still show 260x10 which is incorrect because i dropped it since i couldn't get it to prime stable. I changed the OC settings in windows and it didn't change prime's reading.

http://img.photobucket.com/albums/v.../2500stable.jpg

here is my other spec

Thermalright xp-90 with 92mm tornado
Abit AV8
Antec TrueBlue 480W
Crucial Ballistix 3200
Gecube X800XTPE cooled with zalman ZM80D-HP
SoundBlaster Audigy2 ZS
Raptor I x 1
WD Cavier SATA 120GB

[skid]

3500+ Newcastle

ADA3500DEP4AW
CBAUC 0420SPMW
9763414F40037

Does 2400Mhz (240x10) stable @ 1.6v.
Ran a few Benches at 2500Mhz (250x10), but I cannot honestly call that stable.
http://eatcleansoap.com/cody/images/a64stepping_thread.jpg

[recover]

3200+ Winnie w/ stock heatsink and fan.

2450Mhz@ 1.55v (245HTTx10)

We just got done playing Call of Duty and Battlefield 1942 for three hours, with a benchmark here and there just cause they like to be ran. ..if I can game continuously until I decide it's bedtime (which we do nightly) without any problems, I would define that as "stable".

http://www.eatcleansoap.com/cody/images/a64_specs.jpg

[Alec]

nice stuff. Try lowering the volts to say 1.45Vcore and do a 32m SuperPi. Should give ya better temps and suck less power from ur PSU

[mesyn191]

ADA3500DEP4AW
CBAEC 0427WPMW

3500+@2.7Ghz
DFI Ultra-D 3.10 non p BIOS
2 x 512MB OCZ 3200vx @ 1T 2-2-2-8 245Mhz @ 3.3v
x850xt PCIe @ stock
2 x 36GB Raptor (still get 10DE error so RAID is a no go)
Mad Dog 600w PSU (+3.3@3.4 +5v@4.99 +12v@11.89)
VapochillLS -47C/-33C idle/load

[STONKA]

3200+ 0445 SPAW with Air cooled 100% prime95 Stable by 1.45 Vcore :)

http://www.forumdeluxx.de/gallery/data/500/71973200_.jpg

Or 3000 MHZ 100% prime95 Stable on Mach2 GT , but only 1.53 real Vcore :(
DFI must be her :)

http://www.forumdeluxx.de/gallery/data/500/71973000mhz.JPG

[overcrash86]

my personal last test validated :D

WC Home made

http://valid.x86-secret.com/show_oc.php?id=8691

http://valid.x86-secret.com/cache/8691.png

and the FSB test ,i'll retry with 3,1xx Ghz just for fun :D

http://valid.x86-secret.com/show_oc.php?id=8681

http://valid.x86-secret.com/cache/8681.png

[shimmishim]

3200+ 0445 SPAW with Air cooled 100% prime95 Stable by 1.45 Vcore :)

http://www.forumdeluxx.de/gallery/data/500/71973200_.jpg

Or 3000 MHZ 100% prime95 Stable on Mach2 GT , but only 1.53 real Vcore :(
DFI must be her :)

http://www.forumdeluxx.de/gallery/data/500/71973000mhz.JPG

nice speed but when you run large FFT's or blend test you're not stressing just the cpu... it'd be better to run small fft's...

[STONKA]

small ffts rock also 100% Stable
First i test small ffts than large ffts :)

[Formann]

Put my "ClawCastle" under the CPU cooler last night. Its a CAA2C 0506BPMW

3200Mhz super-pi 1-4m stable. 1.86v

Max in prime is 3Ghz .. diddn´t have the time to try any higher, but will do so tonight.

http://privat.bluezone.no/forman/images/3200Mhz.JPG

[TheMeatFrog]

CBBHD 0444 MPM Winnie :)
http://img245.echo.cx/img245/1782/3042gh.jpg (http://www.imageshack.us)

[alexgontijo]

3200+ Venice
CBBLE 0519 DPBW

2.7 GHz (270x10) - 1.55v - 10 hours Primed
2.7 GHz (300x9) - 1.55v - 1 hour only (but should be the same)

31s on SuperPI.

I'll try 2.8 soon...

Regards,

AleX

[Lestat]

3200+ Venice
0519 LBBLE APAW
neo2 Plat. no mods and really @#%^ voltage readings
Bios setting is 1.57 yet putting a meter on the mobo shows 1.75 and core center shows 1.65 +/-
water cooled.

the 3 pictures are simply reference of different settings.
my ram is really limited as this ocz pc4000 rev2 really isnt the best overclocking. although running ram at 133mhz allows for 340+ HTT i try to achive 1:1 as running a divider just creates a severe lack in memory performance. it makes the overclock not worth it as your mem thruput just suffers severely. The first picture reflect 166mhz Dram the last 2 reflect 133mhz.
Prime 95 does not work for any of them BUT SP2004 runs perfectly for all of them. why ? i do not know....
SuperPi 1m does pass on all 3 settings which is good.

With the irregular voltage readings im getting and the minimal 1:1 clocking im not getting the speeds id like. but the picks you see are what i am getting thus far.
The cpu is only 4 days old and im able to go higher with less voltage each day.

[SunTzu69]

A64 3200 1MB mobile @ 2.5Ghz 1T with 1.78v, 14 hour prime stable. Humming along nicely for 9 months now with 2x512 3700EB @ 250Mhz 1:1 3-3-3-8 @ 3.1v, see sig for more.

[Lestat]

2.5Ghz 1T with 1.78v,

holy crap OUCH that cpu is still alive with that voltage ?

both my CG Clawhammer 3200's do 2.55ghz @ 1.5 and 1.55v

[SunTzu69]

holy crap OUCH that cpu is still alive with that voltage ?

both my CG Clawhammer 3200's do 2.55ghz @ 1.5 and 1.55v

Yeah, apparently I am not as fortunate as you and this cpu needs the voltage to hit 2.5Ghz. I have had it going for 10 months now if I recall. I have a dual heater core (2x120mm) with Swiftech block on the cpu, which keeps it very cool. At the time, I had done my research and found that 1.78v was high, but sustainable with this type of cooling on a CH. If you have evidence to the contrary, I would certainly love to hear about it before she rests in peace... ;)

[Lestat]

ah your on water.. that helps but gosh i have never seen vapo running that high of volts..

i dont need to produce evidence all you gotta do is look around you.. 1.78v on a DTR or Mobile clawhammer is suicide

but hey man if it works it works you cant argue that fact! right ?
that is damned odd though ive never seen anyone have to run that high just to reach 2.5 very odd indeed.... especially on the beloved 250GB mobo.

[Kaffebord]

My highest cpu clock:
http://www.home.no/kaffebord/270FSB.JPG

My best PI-score:
http://www.home.no/kaffebord/2.JPG

I can't run my ram at higher speed because I don't have any kind of vDimm mod or a ram booster. But I will improve my scores as soon as i get my hands on one :D

[gianni-gt]

My SanDiego 3700+

ADA3700DAA5BN
KACAE 0602GPMW
1400929A60416

3000MHz@1.376V Prime (http://bastel-gianni.ripping.org/overclocking/prime_sd3700_0602gpmw2_3000.jpg)
3120MHz@1.504V Prime (http://bastel-gianni.ripping.org/overclocking/prime_sd3700_0602gpmw2_3120.jpg)
3160MHz@1.568V SuperPi 1M (http://bastel-gianni.ripping.org/overclocking/superpi_26.047.jpg)
3419MHz@1.664V CPU-Z (http://valid.x86-secret.com/show_oc.php?id=97699)

without hs! cooled with 22° warm water (@prime)....

for more records check the db in my sig!